Morphometric analysis of the skulls of a ram and ewe Romanov sheep (Ovis aries) with 3D modelling.

BACKGROUND: With the development of technology, 2D images have left their place for 3D models. The 3D modelling technique is widely used in plastic surgery, orthopaedic surgery, neurosurgery, traumatology, dentistry and medical education. The skull is important in terms of containing the starting parts of systems with vital functions. OBJECTIVE: The aim of the study is to reveal the difference between male and female and other species by 3D (three-dimensional) modelling and craniometric measurements of Romanov heads. METHODS: In our study, skulls of Romanov sheep (10 females and 10 males) older than 1-year-old were used. The heads of Romanov sheep were scanned with computed tomography and modelled in 3D. RESULTS AND CONCLUSIONS: In the study, it was determined that there was a statistically significant difference between male and female sheep in terms of the largest nose length, facial width, molar row length, viscerocranium length, and foramen magnum height parameters (p < 0.05). It was determined that the greatest width of the foramen magnum measurement parameter and the skull index showed statistically significant differences between the genders at the p < 0.01 level. No statistically significant difference was found in other measurements (p > 0.05). The data obtained as a result of the study will help in the racial discrimination and classification of bones obtained from zoo archaeological excavations.

Developmental three-dimensional examination of the pelvic cavity of Hamdani crossbred sheep fetuses (Ovis aries) in the last two periods of gestation.

BACKGROUND: Türkiye is a country in the world ranking in terms of sheep breeding. Hamdani crossbred sheep breed is one of the sheep breeds that can adapt to the difficult conditions in our country. In addition, the sentence may be corrected as 'Especially in the southeastern part of the Türkiye, crossbreeding is preferred by breeders to increase the yield characteristics of sheep'. OBJECTIVES: In our study, it was aimed to perform a pelvimetric analysis of Hamdani crossbred sheep fetuses in the second and third trimesters by three-dimensional modelling method. METHODS: For this purpose, a total of 40 second-trimester (10 females, 10 males) and third-trimester (10 females, 10 males) fetuses were used. The pelvises of the fetuses were imaged with CT and 3D models were created. Sixteen pelvimetric measurements were performed from the models. The results obtained were evaluated statistically. RESULTS: The study found statistically significant differences between male and female fetuses in terms of vertical diameter (VD) and foramen obturatum width (FOW) measurement parameters in the second trimester. In the third trimester, there were statistically significant differences between genders in acetabulum (AC) (p < 0.01), medial ischial tuberosities (MIT), and ischiatic arch (IA) (p < 0.05) parameters. As a result of the correlation analysis, it was determined that the pelvis length (PL) measurement parameter was positively correlated with different parameters in varying degrees in both periods, while the IA parameter did not show significant correlations with the other parameter in the last two periods of pregnancy. CONCLUSION: In conclusion, the data obtained will be useful in pelvimetric evaluations of human and animal fetuses, anatomy education, zooarchaeology and taxonomy studies.

Examination of upper respiratory tracts of Siirt-coloured mohair goats by scanning electron microscopy before and after plastination.

Present study was conducted to determine the changes in the surface structure of the upper respiratory tract of Siirt-coloured mohair goats by the silicone plastination method. Accordingly, the heads of 10 Siirt-coloured mohair goats procured from slaughterhouses were divided into two halves. Half of each head was plastinated. After macro-comparisons were made, the deformations of silicone plastination on the surface were examined by comparing the scanning electron microscope (SEM) findings of both upper respiratory tract tissue samples collected from plastinates and fresh material. When the data from scanning electron microscopy were analysed, cilia, cobblestone patterns, goblet cells and gland ducts on the epithelial surface were identified in areas on the upper respiratory tract. The SEM images of the plastinated tissues showed that the surface structures were degenerated due to the deformation of the surface epithelium. The plastination technique damaged the structures on the surface epithelium. Since the plastination technique and scanning electron microscopy have been studied together for the first time, we believe this would contribute to the scientific literature.

Three-dimensional modelling and morphometric analysis of skull of badger (Meles meles) with computed tomography images.

BACKGROUND: Morphometric measurements help to understand the skull morphology in different animal species, detect skull deformations and figure out their causes. OBJECTIVES: The aim of this study is to make a three-dimensional (3D) modelling of the badger skull using computed tomography, to show its anatomical structures and to reveal the morphometric measurement values. METHODS: Skull measurements were carried out using a digital calliper at 27 measurement points based on metric measurement points. After the scanned images were stored in Digital Imaging and Communications in Medicine format, they were transferred to MIMICS 20.1 (The Materialize Group) programme and 3D models the skulls were created. The surface area and volume values of the skulls were calculated on these models. RESULTS: The volume and surface area parameters were expressed as mean ± SE. Four different indices were calculated using osteometric measurements. Statistical analyses were made by determining the mean value and standard deviation of the examined properties and the correlation coefficients among these properties. In the metric measurement points taken as a basis, the longest measurement in the skulls was the total length and its mean value was 124.60 ± 0.64 mm. The shortest measurement was the breadth dorsal to the external auditory meatus, and its mean value was 6.75 ± 0.24 mm. CONCLUSIONS: Consequently, statistical differences in the craniometric values of badgers' skulls were determined by using CT and 3D modelling software. In addition, it was concluded that the badger skull can be easily distinguished from other carnivore species by carrying out morphometric measurements.

Computing Generalized Convolutions Faster Than Brute Force.

In this paper, we consider a general notion of convolution. Let D be a finite domain and let Dn be the set of n-length vectors (tuples) of D. Let f:D×D→D be a function and let ⊕f be a coordinate-wise application of f. The f-Convolution of two functions g,h:Dn→{-M,…,M} is (g⊛fh)(v):=∑vg,vh∈Dns.t.v=vg⊕fvhg(vg)·h(vh)for every v∈Dn. This problem generalizes many fundamental convolutions such as Subset Convolution, XOR Product, Covering Product or Packing Product, etc. For arbitrary function f and domain D we can compute f-Convolution via brute-force enumeration in O~(|D|2n·polylog(M)) time. Our main result is an improvement over this naive algorithm. We show that f-Convolution can be computed exactly in O~((c·|D|2)n·polylog(M)) for constant c:=3/4 when D has even cardinality. Our main observation is that a cyclic partition of a function f:D×D→D can be used to speed up the computation of f-Convolution, and we show that an appropriate cyclic partition exists for every f. Furthermore, we demonstrate that a single entry of the f-Convolution can be computed more efficiently. In this variant, we are given two functions g,h:Dn→{-M,…,M} alongside with a vector v∈Dn and the task of the f-Query problem is to compute integer (g⊛fh)(v). This is a generalization of the well-known Orthogonal Vectors problem. We show that f-Query can be computed in O~(|D|ω2n·polylog(M)) time, where ω∈[2,2.372) is the exponent of currently fastest matrix multiplication algorithm.

Size and shape of the neurocranium of laying chicken breeds.

The neurocranium in birds provides valuable insights into their morphological diversity, including adaptations related to brain size, facial shaping, and environmental factors. This study analyzes the neurocranial shape characteristics and size of chickens with similar genetic backgrounds. By examining the neurocranial shape variation in chickens of the same age and sex, the study aims to understand the factors contributing to morphological diversity within this specific group. 3D geometric morphometrics was used to analyze 235 neurocrania from four chicken breeds. The analysis revealed significant differences in centroid size among the chicken breeds. The largest neurocranium centroid size was found in Sasso chickens., which were statistically separated from Atak-S. Additionally, centroid size effectively differentiates between Lohmann Brown and Lohmann Sandy chicken breeds. The most significant shape variation concerned the width of the rostral part of the frontal bone. However, according to the PC1 value, the shape variation was observed within rather than between groups. Lohmann Sandy chickens exhibited higher variability in neurocranial shape, suggesting greater shape diversity within this breed than others. As for shape analysis, the breeds showed closer similarity to each other. Lohmann Sandy chickens are characterized by positive PC1 value, with the rostral end of the frontal region inclined more ventrally, and a more extensive basioccipital region. Sasso chickens have a more dome-shaped middle part of the frontal region than other breeds. The study also identified the most significant shape variation among the study samples, observed at the rostral part of the frontal bone. These findings contribute to understanding the genetic and environmental influences shaping neurocranial morphology in chickens. Similar studies in different bird species and subspecies offer valuable insights into avian biology and adaptation.

Neuroprotective effects of the combined treatment of resveratrol and urapidil in experimental cerebral ischemia-reperfusion injury in rats.

PURPOSE: To evaluate the neuroprotective effect of resveratrol, urapidil, and a combined administration of these drugs against middle cerebral artery occlusion (MCAO) induced ischemia/reperfusion (IR) injury model in rats. METHODS: Thirty-five rats were divided into five groups of seven animals each. Animals in IR, IR resveratrol (IRr), IR urapidil (IRu), and IR + combination of resveratrol and urapidil (IRc) were exposed to MCAO induced cerebral ischemia reperfusion injury model. Rats in IRr and IRu groups received 30-mg/kg resveratrol and 5-mg/kg urapidil respectively. Animals in IRc received a combined treatment of both drugs. At the end of the study, brain tissues were used for oxidative stress (malondialdehyde, glutathione, and superoxide dismutase), pro-apoptotic caspase-3, anti-apoptotic Bcl-2, and pro-inflammatory tumor necrosis factor-α cytokine level measurements. RESULTS: The MCAO model successfully replicated IR injury with significant histopathological changes, elevated tissue oxidative stress, and upregulated apoptotic and inflammatory protein expression in IR group compared to control group (p < 0.001). All parameters were significantly alleviated in IRr group compared to IR group (all p < 0.05). In IRu group, all parameters except for caspase-3 and Bcl-2 were also significantly different than IR group (all p < 0.05). The IRc group showed the biggest difference compared to IR group in all parameters (all p < 0.001). The IRc had higher superoxide dismutase and Bcl-2 levels, and lower caspase-3 levels compared to both IRr and IRu groups (all p < 0.05). Also, the IRc group had lower MDA and TNF-α levels compared to IRu group (all p < 0.05). CONCLUSIONS: The results indicate that combined treatment of resveratrol and urapidil may be a novel strategy to downregulate neurodegeneration in cerebral IR injury.

Morphometric, macroscopic and microscopic investigation of glandulae uropygiale in turkeys (Meleagris gallopavo).

This study was carried out to investigate the macroanatomical, morphometric, histological, and electron microscopic characteristics of the uropygial gland in adult male and female turkeys (Meleagris gallapovo).

Evaluation and 3D imaging of mineral structure changes of the rabbit (New Zealand) skull during developmental periods.

This study aimed to determine the morphometric measurements anatomically and CT images of skulls of healthy male and female rabbits during postnatal development, to analyse the data statistically and to demonstrate the structural changes in bone. A total of 40 rabbits (20 females and 20 males) were divided into four groups including prepubertal period (group I (0-1 month)), period between adolescence and adulthood (group II (3-5 month)) and later (young adult period as group III (1-3 years) and old adult period as group IV (3-5 years)), with five animals in each group. After the morphometric measurements, the surface area and volume values of the skull were calculated. The skulls were reconstructed using a 3D Slicer (5.0.2), which is used for 3D modelling. The cranial bones in each group were then crushed using a grinder so that the powdered samples were obtained for XRF (X-ray fluorescence technique). The p-value was statistically highly significant between group and gender (p < 0.001). In morphometric measurements, males were generally higher than females. Only PL, GBOC and GNB measurements were higher in females. The p-value between groups (in all measurements), between genders (in TL, GLN, FL, VL, OZB and GBN parameters) and between groups and genders (in TL, DL and VL parameters) was statistically highly significant (p < 0.001). The p-value between the groups, p-value between sexes and p-value between group and sex in Si, P, K, Ca, Ni, Zn, Sr, Sr and Ca/P elements were statistically significant (p < 0.001). Consequently, metric, volume and surface area measurements were taken through 3D modelling of skull bone in prepubertal period (group I), period between adolescence and adulthood (group II) and later (young adult period as group III and old adult period as group IV) of rabbits and the change in the mineral structure during postnatal development and effect of sex on this change were investigated. This might be the first study to assess both metric and mineral changes at four age intervals taken during the life span of rabbits.

Comparison of Skull Morphometric Characteristics of Simmental and Holstein Cattle Breeds.

This study aimed to reveal the morphological characteristics of pure Holstein and Simmental skulls and to obtain reference values for morphometric analysis. Moreover, 54 skulls from 12- to 14-month-old male Holstein (n = 25) and Simmental (n = 29) cattle were collected from Turkey's Southeastern Anatolia Region between 2023 and 2024. Linear measurements indicated that Holsteins had longer skulls compared to Simmentals. Holsteins exhibited significantly higher values for the greatest length of nasals and the shortest skull length. The facial breadth was wider in Holsteins and statistically distinctive between the breeds. Holsteins had a more oval orbital bony roof, while Simmentals exhibited a wider orbital structure. The orbital index was higher in Holsteins, distinguishing between the two breeds. It was observed that Simmental cattle had a wider occipital region. This difference is likely due to the larger lateral appearance of the Simmental skull, which has more body weight and provides a larger surface area for muscle attachment. These differences not only aid in breed identification but also offer insights into the functional adaptations of each breed. Future research should explore the genetic and environmental factors contributing to these morphological traits, further enriching our knowledge of cattle morphology and its implications for breeding and conservation efforts.

Analysis and 3D Imaging of Morphometric - Mineral Structure Changes in Skulls of Male and Female Guinea Pigs During and After Developmental Period

SUMMARY: Even though morphometric and mineral studies related to the guinea pig (Cavia porcellus) skull have been carried out, this study is the first attempt to evaluate all developmental stages of male and female guinea pigs. This study aims to this study is to create 3D modeling of CT images obtained from the skulls of male and female guinea pigs during the developmental period (prepuberty and the period between puberty and adulthood) and following periods (young adulthood and old adulthood), to analyze some biometric bone data such as volume, surface area and length, and to assess the developmental analysis of the mineral matter change in their skulls. The CT-scanned skulls were transferred to 3D Slicer (5.0.2), which is used for 3D modeling. The surface area and volume were calculated by measuring the measurement points on the models. In addition, the XRF device was used to show elemental ratio changes during different developmental stages. According to metric measurements, a gradual increase was observed during the life period. The metric measurements of the skull bone had a higher measurement value in male guinea pigs than in their female counterparts. While Ca/P ratio increased up to the third group and partially decreased in the fourth group in males, it gradually increased from the first group to the fourth group in females. This study revealed that puberty, adulthood and sex were effective in the physical and chemical characterization of skull bone structure in guinea pigs.

Aunque se han realizado estudios morfométricos y de minerales relacionados con el cráneo del cobayo (Cavia porcellus), esta investigación es el primer intento de evaluar las etapas de desarrollo de cobayos machos y hembras. El objetivo de este estudio fue crear un modelado 3D de imágenes de tomografía computarizada obtenidas de los cráneos de cobayos machos y hembras durante el período de desarrollo (prepubertad y el período entre la pubertad y la edad adulta) y los períodos siguientes (edad adulta joven y edad adulta mayor), para analizar algunos datos biométricos de los huesos, como el volumen, la superficie y la longitud, y además, analizar el cambio de materia mineral en sus cráneos durante el desarrollo. Los cráneos escaneados se transfirieron a 3D Slicer (5.0.2), que se utiliza para el modelado 3D. El área de superficie y el volumen se calcularon midiendo los puntos de medición en los modelos. Además, se utilizó el dispositivo XRF para mostrar los cambios en las proporciones elementales durante diferentes etapas de desarrollo. Según mediciones métricas, se observó un aumento gradual durante el período de vida. Las medidas métricas del hueso del cráneo tuvieron un valor de medición más alto en los cobayos machos que en las hembras. Mientras que la relación Ca/P aumentó hasta el tercer grupo y disminuyó parcialmente en el cuarto grupo en los machos y aumentó gradualmente del primer grupo al cuarto grupo en las hembras. Este estudio reveló que la pubertad, la edad adulta y el sexo fueron efectivos en la caracterización física y química de la estructura ósea del cráneo en cobayos.

Oral health status after orthodontic treatment: a retrospective study / Estado de salud bucal después del tratamiento de ortodoncia: un estudio retrospectivo

ABSTRACT: Orthodontic appliances in the oral cavity may cause problems such as white spot lesions, dental plaque, periodontal disease and root resorption. The aim of this study was to investigate the association between orthodontic treatment and oral health parameters including visible dental plaque, gingival recession and white spot lesions (WSLs). A total of 170 patients (86 females, 84 males) were randomly selected to determine visible dental plaque, gingival recession and white spot lesions by using pre-treatment and post-treatment oral photographs. Except of previously extracted teeth, maxillary and mandibular incisors, canine, 1st and 2nd premolars and 1st molar were evaluated. There was a significant difference between the T0 (before treatment) and T1 (after treatment) groups in visible plaque (P< 0.001). The distribution of gingival recession frequencies according to Miller classification before treatment did not differ from the after treatment (P=082). A statistically significant increase in the severity of WSL was detected between the two time points (P< 0.001). Males have been shown to have higher WSL incidence after treatment. In conclusion, the present study showed that visible dental plaque and white spot lesions significant increase after orthodontic treatment. Considering the relationship between oral health and orthodontic treatment, clinicians and patients should know the risks and take precautions.

RESUMEN: Los aparatos de ortodoncia en la cavidad oral puede causar problemas como lesiones de mancha blanca, placa dental, enfermedad periodontal y reabsorción radicular. El objetivo de este estudio fue investigar la asociación entre el tratamiento de ortodoncia y los parámetros de salud bucal, incluida la placa dental visible, la recesión gingival y las lesiones de mancha blanca (LMB). Un total de 170 pacientes (86 mujeres, 84 hombres) fueron seleccionados al azar para determinar la placa dental visible, la recesión gingival y las lesiones de manchas blancas mediante el uso de fotografías orales antes y después del tratamiento. Excepto los dientes extraídos previamente, se evaluaron incisivos maxilares y mandibulares, caninos, premolares y primeros molares. Hubo una diferencia significativa entre los grupos T0 (antes del tratamiento) y T1 (después del tratamiento) en la placa visible (P<0.001). La distribución de las frecuencias de recesión gingival según la clasificación de Miller antes del tratamiento no mostraron diferencias significativas con respecto al postratamiento (P=0.082). Se detectó un aumento estadísticamente significativo en la gravedad de LMB entre los dos puntos de tiempo (P<0.001). Se ha demostrado que los hombres tienen una mayor incidencia de LMB después del tratamiento. En conclusión, el presente estudio mostró que la placa dental visible y las lesiones de manchas blancas aumentaron significativamente durante el tratamiento de ortodoncia. Teniendo en cuenta la relación entre la salud bucal y el tratamiento de ortodoncia, los médicos y los pacientes deben conocer los riesgos y tomar precauciones.