RESUMEN
Temporomandibular joint osteoarthritis (TMJ OA) is a prevalent degenerative disease characterized by chronic pain and impaired jaw function. The complexity of TMJ OA has hindered the development of prognostic tools, posing a significant challenge in timely, patient-specific management. Addressing this gap, our research employs a comprehensive, multidimensional approach to advance TMJ OA prognostication. We conducted a prospective study with 106 subjects, 74 of whom were followed up after 2 to 3 y of conservative treatment. Central to our methodology is the development of an innovative, open-source predictive modeling framework, the Ensemble via Hierarchical Predictions through Nested cross-validation tool (EHPN). This framework synergistically integrates 18 feature selection, statistical, and machine learning methods to yield an accuracy of 0.87, with an area under the ROC curve of 0.72 and an F1 score of 0.82. Our study, beyond technical advancements, emphasizes the global impact of TMJ OA, recognizing its unique demographic occurrence. We highlight key factors influencing TMJ OA progression. Using SHAP analysis, we identified personalized prognostic predictors: lower values of headache, lower back pain, restless sleep, condyle high gray level-GL-run emphasis, articular fossa GL nonuniformity, and long-run low GL emphasis; and higher values of superior joint space, mouth opening, saliva Vascular-endothelium-growth-factor, Matrix-metalloproteinase-7, serum Epithelial-neutrophil-activating-peptide, and age indicate recovery likelihood. Our multidimensional and multimodal EHPN tool enhances clinicians' decision-making, offering a transformative translational infrastructure. The EHPN model stands as a significant contribution to precision medicine, offering a paradigm shift in the management of temporomandibular disorders and potentially influencing broader applications in personalized healthcare.
Asunto(s)
Osteoartritis , Trastornos de la Articulación Temporomandibular , Humanos , Estudios Prospectivos , Articulación Temporomandibular , Osteoartritis/terapia , Trastornos de la Articulación Temporomandibular/terapia , Proyectos de InvestigaciónRESUMEN
INTRODUCTION: There is currently no consensus in the literature whether the aetiology of a Class II subdivision is dental, skeletal or both. The aim of this study was to identify and quantify skeletal and dental asymmetries in Class II subdivision malocclusions. METHODS: CBCTs from 33 Class II subdivision malocclusion patients were used to construct 3D volumetric label maps. Eighteen landmarks were identified. The original scan and associated 3D volumetric label map were mirrored. Registration of the original and mirrored images relative to the anterior cranial base, maxilla and mandible were performed. Surface models were generated, and 3D differences were quantified. Statistical analysis was performed. RESULTS: Anterior cranial base registration showed significant differences for fossa vertical difference, fossa roll, mandibular yaw, mandibular lateral displacement and lower midline displacement. Regional registrations showed significant differences for antero-posterior (A-P) mandibular length, maxillary roll, A-P maxillary first molar position, maxillary first molar yaw and maxillary first molar roll. Class II subdivision patients also show an asymmetric mandibular length as well as an asymmetric gonial angle. Moderate correlations were found between the A-P molar relationship and fossa A-P difference, mandibular first molar A-P difference, maxillary first molar A-P difference and maxillary first molar yaw. CONCLUSIONS: This study suggests that Class II subdivisions can result from both significant skeletal and dental factors. Skeletal factors include a shorter mandible as well as posterior and higher displacement of the fossa on the Class II side, resulting in mandibular yaw. Dental factors include maxillary and mandibular first molar antero-posterior asymmetry.
Asunto(s)
Maloclusión Clase II de Angle , Maloclusión , Diente , Humanos , Arco Dental , Maloclusión Clase II de Angle/diagnóstico por imagen , Mandíbula , Maxilar , Cefalometría/métodosRESUMEN
BACKGROUND AND AIM: To compare two cone beam computed tomography (CBCT) analysis techniques for measuring tertiary dentin (TD) volume, density, and root length increase, after indirect pulp therapy (IPT) in young permanent teeth with conventional periapical radiographs. DESIGN: Comparative study design: Sixty-nine CBCT scans were taken initially (T1) and after 1 year (T2) of IPT. New CBCT analysis technique A, standardization, segmentation, and registration of T1 and T2 scans were performed using ITK-SNAP and 3D Slicer CMF to measure TD volume (mm3), density (gray-level intensity), and root length increase (mm). In the traditional CBCT analysis technique B, analyses were conducted using the In-Vivo software to calculate TD thickness (mm), radiodensity (HU%), and root length increase (mm). Paired t-test and the intraclass correlation coefficient were calculated to compare and assess the reliability of all techniques. RESULTS: No significant difference between the two techniques existed in the measurement of TD mineral density (Mean [SD]:A = 22.4 [15.4]; B = 24.4 [15.4]; p = .47). Technique A resulted in significantly higher root length increase values (Mean [SD]: A = 1.3 [0.6]; B = 1.1 [0.5]; p = .03). The two techniques showed acceptable reliability levels (0.76-0.99). CONCLUSION: CBCT analysis techniques yielded similar findings for mineral density. The new CBCT volumetric analysis technique, although more laborious, produced higher values for root length increase, and allowed for measurement of dentin volume.
RESUMEN
The aim of this study was to conduct a three-dimensional (3D) evaluation of radiographic changes after indirect pulp capping (IPC) with silver diamine fluoride (SDF) with or without potassium iodide (KI) and resin-modified glass ionomer cement (RMGIC) in deep carious young permanent molars using cone-beam computed tomography (CBCT). 108 first permanent molars with deep occlusal cavitated caries lesions, in forty-nine 6- to 9-year-old children, were randomly allocated to one of 3 groups (n = 36) and treated with SDF+KI, SDF, and RMGIC as IPC materials. CBCT scans were taken at 0 and 12 months to assess tertiary dentin formation (volume and grey level intensity), increase in root length, and pathological changes such as secondary caries, periapical radiolucency, internal resorption, and obliteration of the pulp. The 3D image analysis procedures were performed using ITK-SNAP and 3D Slicer CMF. Comparisons were made using analysis of variance with a fixed effect for treatment and random effects for patient and patient-by-treatment to account for within-patient correlations. A two-sided 5% significance level was used. There were no significant differences among the three groups regarding tertiary dentin volume (p = 0.712) and grey level intensity (p = 0.660), increase in root length (p = 0.365), prevention of secondary caries (p = 0.63), and periapical radiolucency (p = 0.80) in the analysed 69 CBCT scans. The study did not find differences among the groups regarding quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure as shown by CBCT. Clinical Significance: The results show no significant differences in radiographic outcomes (quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure) when using SDF+KI, SDF, and RMGIC in IPC. The results of this study can help guide treatment decision-making regarding use of SDF and SDF+KI as IPC materials in deep cavitated lesions.
Asunto(s)
Caries Dental , Yoduro de Potasio , Niño , Humanos , Yoduro de Potasio/farmacología , Yoduro de Potasio/uso terapéutico , Recubrimiento de la Pulpa Dental/métodos , Dentina/diagnóstico por imagen , Dentina/patología , Fluoruros Tópicos/farmacología , Fluoruros Tópicos/uso terapéutico , Caries Dental/diagnóstico por imagen , Caries Dental/prevención & control , Caries Dental/patología , Compuestos de Amonio Cuaternario/farmacología , Compuestos de Amonio Cuaternario/uso terapéutico , Cementos de Ionómero Vítreo/farmacología , Cementos de Ionómero Vítreo/uso terapéuticoRESUMEN
INTRODUCTION: This study aimed to quantify the outcomes of adolescent patients with Class II malocclusion treated with the Carriere Motion 3D Appliance (CMA) combined with full fixed appliances. METHODS: Cone-beam computed tomography scans of 22 patients were available before orthodontic treatment (T1), at removal of the CMA (T2), and posttreatment (T3). The average age of the patients was 13.5 ± 1.6 years at T1, 14.1 ± 0.2 years at T2, and 15.6 ± 0.5 years at T3. The 3-dimensional image analysis procedures were performed using ITK-SNAP (version 3.6.0; www.itksnap.org, Hatfield, Pa) and SlicerCMF (version 4.11.0; http://www.slicer.org, Cambridge, Mass); skeletal and dentoalveolar changes relative to cranial base, maxillary, and mandibular regional superimpositions were evaluated. RESULTS: Changes were analyzed with 1 sample t tests using the mean differences during the CMA phase (T1 to T2) and total treatment time (T1 to T3). Significant skeletal changes included a slight reduction of ANB from T1 to T3, mandibular growth (Co-Gn increment of 1.2 mm and 3.3 mm from T1 to T2 and T1 to T3, respectively), inferior displacement of point A, and anterior and inferior displacement of point B. The mandibular plane did not change significantly during treatment. During the CMA treatment, posterior tipping and distal rotation of the maxillary molars, tip back and inferior displacement of the maxillary canines, significant mesial rotation, and superior displacement of the mandibular molars were observed. These movements rebounded during the full fixed appliance phase except for the molar and canine vertical displacements. Clinically significant dental changes during treatment included a reduction in overjet and overbite, Class II correction of the molar and canine relationship, and proclination of the mandibular incisors. CONCLUSIONS: The CMA is an effective treatment modality for Class II correction in growing patients because of a combination of mesial movement of the mandibular molar, distal rotation of the maxillary molar, and anterior displacement of the mandible.
Asunto(s)
Maloclusión Clase II de Angle , Aparatos Ortodóncicos Funcionales , Sobremordida , Adolescente , Humanos , Niño , Cefalometría/métodos , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/terapia , Sobremordida/terapia , Mandíbula/diagnóstico por imagen , Maxilar , Diseño de Aparato OrtodóncicoRESUMEN
INTRODUCTION: This study aimed to develop a 3-dimensional (3D) characterization of the severity of maxillary impacted canines and to test the clinical performance of this characterization as a treatment decision support tool. METHODS: Cone-beam computed tomography images obtained from 83 patients with 120 impacted maxillary canines were included. Quantitative information on the canine 3D position and qualitative assessment of root damage of adjacent teeth were evaluated. A severity index was constructed on the basis of the quantitative findings. Clinical applicability was tested by comparing clinical diagnosis and treatment planning for conventional records vs the 3D characterization via a 2-part survey. RESULTS: The average quantitative assessments of impacted maxillary canine position were 6.4 ± 3.6 mm from the midsagittal plane, 11.6 ± 3.1 mm in height relative to the occlusal plane, 31.5° ± 18° of roll, and 48.8° ± 14.3° of pitch. The severity index ranged from 0-13 with a mean score of 4.5 ± 2.2. Overlap with adjacent teeth was the greatest contributor (33%) to the index. Bicortically impacted canines caused the most severe root damage. Cone-beam computed tomography was preferred for assessing root damage and overall severity, whereas conventional imaging was sufficient for height and angulation assessment. The 3D report was very important or important for evaluating root damage, canine position, overall severity, and overlap. The 3D report changed most of the decisions relating to biomechanics, patient education, and treatment time estimate. The decision of exposure and traction vs extraction was changed 22% of the time after the presentation of the 3D report. CONCLUSIONS: The overlap with adjacent teeth frequently contributes the most to the severity index. The 3D report provided relevant clinical information regarding the canine position, damage to adjacent teeth, and the severity index, with a profound impact on the decisions of the clinicians regarding biomechanics, patient education, and treatment time estimate.
Asunto(s)
Resorción Radicular , Diente Impactado , Humanos , Maxilar , Tomografía Computarizada de Haz Cónico/métodos , Diente Impactado/diagnóstico por imagen , Diente Impactado/terapia , Diente Impactado/complicaciones , Diente Canino/diagnóstico por imagen , Tracción/efectos adversos , Resorción Radicular/etiologíaRESUMEN
Advancements in technology and data collection generated immense amounts of information from various sources such as health records, clinical examination, imaging, medical devices, as well as experimental and biological data. Proper management and analysis of these data via high-end computing solutions, artificial intelligence and machine learning approaches can assist in extracting meaningful information that enhances population health and well-being. Furthermore, the extracted knowledge can provide new avenues for modern healthcare delivery via clinical decision support systems. This manuscript presents a narrative review of data science approaches for clinical decision support systems in orthodontics. We describe the fundamental components of data science approaches including (a) Data collection, storage and management; (b) Data processing; (c) In-depth data analysis; and (d) Data communication. Then, we introduce a web-based data management platform, the Data Storage for Computation and Integration, for temporomandibular joint and dental clinical decision support systems.
Asunto(s)
Sistemas de Apoyo a Decisiones Clínicas , Ortodoncia , Inteligencia Artificial , Ciencia de los Datos , Aprendizaje AutomáticoRESUMEN
INTRODUCTION: This study evaluated whether presurgical characteristics, the magnitude of mandibular advancement, and changes in mandibular plane angle are correlated with long-term stability and postsurgical condylar remodeling and adaptations using 3-dimensional imaging. METHODS: Forty-two patients underwent bilateral sagittal split osteotomies for mandibular advancement using rigid fixation. Cone-beam computed tomography (CBCT) scans were acquired before surgery (T1), immediately after surgery (T2), and at long-term follow-up (T3). The average follow-up period was 5.3 ± 1.7 years after surgery. Anatomic landmark identification on the cone-beam computed tomographies and subsequent quantification of the changes from T1 to T2 and T2 to T3 were performed in ITK-SNAP (version 2.4; itksnap.org) and 3DSlicer (version 4.7; http://www.slicer.org) software. Surgical displacements, mandibular plane angle changes, and skeletal stability were measured relative to cranial base superimposition, whereas condylar remodeling was measured relative to regional condylar registration. Partial correlation coefficients were used to assess relationships between clinical and surgical variables, condylar remodeling, and long-term surgical relapse while controlling for variability in the length of follow-up. RESULTS: B-point relapsed more than 2 mm posteriorly in 55% of the patients. The only variables strongly associated with the posterior movement of B-point long-term were mesial yaw of the condyle during surgery (P ≤0.01) and the length of follow-up from T2 to T3 (P ≤ 0.01). There was no relationship between the magnitude of advancement or presurgical mandibular plane angle and relapse or condylar resorption. Condylar resorption was strongly associated with relapse of B-point in the posterior direction (P ≤0.01) and clockwise rotation of the mandibular plane long-term (P ≤0.01). Twenty-nine percent of subjects showed resorption of more than 2 mm in the inferior direction at the lateral pole, and 17% of the subjects showed resorption of more than 2 mm in the inferior direction at condylion. Compared with male subjects, females exhibited significantly greater condylar remodeling (P ≤0.01) and slightly greater relapse at B-point (P ≤0.05). CONCLUSIONS: Surgical relapse at B-point may occur slowly over time and is primarily due to condylar resorption in mandibular advancement patients. Mesial yaw of the condyle during surgery may lead to condylar resorption postsurgically. In addition, females are at greater risk of condylar resorption postsurgically.
Asunto(s)
Avance Mandibular , Cefalometría , Tomografía Computarizada de Haz Cónico , Femenino , Estudios de Seguimiento , Humanos , Masculino , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , Cóndilo Mandibular/diagnóstico por imagen , Osteotomía Sagital de Rama MandibularRESUMEN
INTRODUCTION: The objectives of this study were to evaluate postsurgical condylar remodeling using a radiographical interpretation, quantify condylar volumetric asymmetry, and assess soft tissue symmetry after simultaneous unilateral high condylectomy and bimaxillary osteotomies. METHODS: Sixteen patients diagnosed with unilateral condylar hyperplasia underwent unilateral high condylectomy and orthognathic surgery to correct skeletal and facial asymmetries. Cone-beam computed tomography scans were acquired before and 1-year after surgery. A radiographic consensus was evaluated for signs of reparative or degenerative changes. The condyles were mirrored and registered for assessment of volumetric and morphologic asymmetry. Soft tissue symmetry was evaluated by measurement of the distance of soft tissue pogonion from the skeletal midsagittal plane. RESULTS: Patients who undergo unilateral high condylectomy and orthognathic surgery present radiographic signs suggestive of degenerative changes, including sclerosis, osteophytes, flattening, and erosion in both the surgical and nonsurgical condyles (P ≤0.01). There was an average volumetric improvement of 531.9 ± 662.3 mm3 1-year postsurgery (P = 0.006). Soft tissue symmetry improved in all patients, with an average improvement of 65.8% (4.0 mm ± 2.6 mm, P ≤ 0.01). There was no correlation between the change in condylar volumetric asymmetry and the stability of the soft tissue correction. CONCLUSIONS: High condylectomy for the correction of a skeletal asymmetry in patients with condylar hyperplasia successfully reduces the volumetric asymmetry between the condyles. Postsurgical dysmorphic remodeling and degenerative changes were noted in both the surgical and nonsurgical condyles. Despite remarkable changes and remaining joint asymmetry, the soft tissue correction is stable 1-year postsurgery.
Asunto(s)
Cirugía Ortognática , Procedimientos Quirúrgicos Ortognáticos , Asimetría Facial/diagnóstico por imagen , Asimetría Facial/patología , Asimetría Facial/cirugía , Humanos , Hiperplasia/diagnóstico por imagen , Hiperplasia/patología , Hiperplasia/cirugía , Cóndilo Mandibular/diagnóstico por imagen , Cóndilo Mandibular/patología , Cóndilo Mandibular/cirugíaRESUMEN
OBJECTIVE: To compare the three-dimensional (3D) linear displacements and the mesiodistal and buccolingual angulation changes after orthodontic treatment in digital dental models (DDMs) and 3D models derived from cone-beam computed tomography (CBCT). SETTINGS AND SAMPLE POPULATION: Digital dental model and CBCT scans were selected from 24 adults who had undergone orthodontic treatment for mandibular anterior crowding. MATERIAL AND METHODS: 3D linear displacements and changes in angular measurements (mesiodistal and buccolingual angulation) were assessed in pre- and post-treatment DDM and CBCT images using the software ITK-snap and 3D SlicerCMF. Intra- and inter-rater agreement of measurements in DDM and CBCT were tested using the intraclass correlation coefficient (ICC). DDM and CBCT measurements were compared using the Wilcoxon test (P < .05), ICC and Bland-Altman plots. RESULTS: Intra- and inter-rater agreement varied from good (ICC > 0.75) to excellent (ICC > 0.90) for both DDM and CBCT measurements. Although no significant difference between DDM and CBCT methods was observed for linear measurements of tooth movement, the angular assessments were different for most measurements. The agreement between measurements from both assessments varied from poor to excellent. CONCLUSIONS: Longitudinal assessments of tooth movements including 3D linear displacements and mesiodistal and buccolingual angulation are reproducible when using both DDM and CBCT. Changes in angular measurements due to orthodontic treatment are discordant when measured in the digital models (clinical crown) and in the CBCT images (whole tooth).
Asunto(s)
Maloclusión , Diente , Adulto , Tomografía Computarizada de Haz Cónico , Humanos , Imagenología Tridimensional , Modelos Dentales , Reproducibilidad de los ResultadosRESUMEN
Clinical applications of 3D image registration and superimposition have contributed to better understanding growth changes and clinical outcomes. The use of 3D dental and craniofacial imaging in dentistry requires validate image analysis methods for improved diagnosis, treatment planning, navigation and assessment of treatment response. Volumetric 3D images, such as cone-beam computed tomography, can now be superimposed by voxels, surfaces or landmarks. Regardless of the image modality or the software tools, the concepts of regions or points of reference affect all quantitative of qualitative assessments. This study reviews current state of the art in 3D image analysis including 3D superimpositions relative to the cranial base and different regional superimpositions, the development of open source and commercial tools for 3D analysis, how this technology has increased clinical research collaborations from centres all around the globe, some insight on how to incorporate artificial intelligence for big data analysis and progress towards personalized orthodontics.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Imagenología Tridimensional , Base del Cráneo , Programas InformáticosRESUMEN
AIM: This study was conducted to determine periodontal changes in postmenopausal breast cancer (BCa) survivors using aromatase inhibitors (AI) as compared to postmenopausal women without BCa. METHODS: An 18-month prospective examination of periodontal health in postmenopausal women (29 receiving AI therapy; 29 women without BCa) was conducted at University of Michigan. Comprehensive periodontal examinations including alveolar bone height (ABH) were conducted at baseline, 6, 12, and 18 months. Bisphosphonate, vitamin D, and calcium supplementation were collected via chart review. Linear mixed models were utilized to investigate the relationship between AI and periodontal measures. RESULTS: Aromatase inhibitor users had significantly deeper probing depths, more dental plaque and clinical attachment loss as compared to controls at the 6, 12, and 18 month study visits (p < 0.05). ABH loss was seen over time within the AI group. The linear mixed model showed a significant effect of time as well as an interaction between aromatase inhibitor use and calcium supplement status. AI users taking calcium experienced less ABH loss over the study than AI users not taking calcium (p = 0.005). CONCLUSION: Aromatase inhibitor therapy has a negative impact on the periodontal health of postmenopausal BCa patients. Calcium supplementation appears to mitigate ABH loss in women on AI.
Asunto(s)
Neoplasias de la Mama , Inhibidores de la Aromatasa , Densidad Ósea , Femenino , Humanos , Posmenopausia , Estudios Prospectivos , Vitamina DRESUMEN
OBJECTIVES: Given that the nature and presence of voids present within grafted sinuses following maxillary sinus elevation procedures were not known, nor was the contribution of these factors to implant success, the purpose of this study was to investigate these parameters and their relationship to implant success. MATERIALS AND METHODS: This study evaluated data from 25 subjects who had a lateral window maxillary sinus augmentation procedure. Cone-beam computed tomography (CBCT) was performed at baseline and 4 months after surgery. CBCT images were used to evaluate grafted sites prior to implant placement. Using CBCT images, three examiners independently measured bone-grafted areas (BG), void areas (V), and percentage of void areas (V%) from six different sections within grafted sites. The six sections were defined as a cross-sectional (CS) midpoint, CS mesial point, CS distal point, horizontal section (HS) low point, HS midpoint, and HS high point. Implant success was also determined. RESULTS: The calculated V% (V/BG) for the CS midpoint, CS mesial point, CS distal point, HS low point, HS midpoint, and HS high point were 5.30 ± 6.67%, 5.79 ± 8.51%, 6.67 ± 7.12%, 2.07 ± 2.56%, 5.30 ± 6.62%, and 4.92 ± 5.17% respectively. Implant success after 6 months of follow-up approximated 100%. CONCLUSIONS: Although voids within grafts varied in terms of distribution and size, the V% within the HS low point were significantly smaller compared to those within the CS midpoint and CS distal point, which had the most intra-subject V%. Thus, more attention should be given to the distal aspect of the sinus when compacting graft materials in the lateral wall sinus augmentation procedure. Implant success was not influenced by the existence of voids as implant success remained high.
Asunto(s)
Trasplante Óseo/métodos , Implantación Dental Endoósea/métodos , Implantes Dentales , Elevación del Piso del Seno Maxilar/métodos , Adulto , Anciano , Tomografía Computarizada de Haz Cónico , Prótesis Dental de Soporte Implantado , Femenino , Humanos , Masculino , Seno Maxilar/diagnóstico por imagen , Seno Maxilar/cirugía , Persona de Mediana Edad , Resultado del TratamientoRESUMEN
OBJECTIVES: This study aimed to evaluate the biologic and structural phenotypes of the bone regenerated via the sandwich bone augmentation (SBA) technique, on buccal implant dehiscence defects. MATERIAL AND METHODS: Twenty-six patients with one buccal implant dehiscence defect each were randomly assigned to two groups. Both groups received a standardized amount of mineralized cancellous and cortical allogenic bone graft. In the test group, a bovine pericardium membrane was placed over the graft, while no membrane was placed in the control group. After 6 months of healing, a bone core biopsy of the regenerated bone was harvested and processed for histologic, immunohistochemical, mRNA, and micro-computed tomography (µCT) analyses. Of the 26 bone core biopsies, only six cores from the test group and six cores from the control group were suitable for the analysis. RESULTS: Bone volume (BV) in the test group was maintained, but tissue maturation appeared to be delayed. In contrast, tissue maturation appeared to be completed in the control group, but BV was compromised. Micro-CT analysis showed that specimens from the control group were more structured and mineralized compared with those from the test group. Histologic analysis showed more residual graft particles scattered in a loose fibrous connective tissue matrix with sparse bone formation in the test group, while the control group showed obvious vital bone formation surrounding the residual graft particles. Positive periostin (POSTN), sclerostin, and runt-related transcription factor-2 (RUNX2) immunoreactivities were detected in both the control and test groups. However, tartrate-resistant acid phosphatase (TRAP) positive was mostly noted in the control group. There were significant differences in POSTN, RUNX2 and VEGF expressions between the test and control groups. CONCLUSION: These findings indicated that the SBA technique was an effective method in preserving adequate structural volume while promoting new vital bone formation. Use of the collagen barrier membrane has successfully maintained the volumetric dimensions of the ridge but might have slowed down the complete maturation of the outermost layer of the grafted site.
Asunto(s)
Aumento de la Cresta Alveolar/métodos , Implantación Dental Endoósea/métodos , Histocitoquímica , Inmunohistoquímica , Maxilar/anatomía & histología , ARN/análisis , Tomografía Computarizada por Rayos X , Humanos , Maxilar/química , Maxilar/citología , Maxilar/diagnóstico por imagen , Resultado del TratamientoRESUMEN
INTRODUCTION: The purpose of this randomized controlled clinical trial was to evaluate 2 different techniques for vertical ridge augmentation (VRA) of the posterior mandible. MATERIALS AND METHODS: Sixteen subjects with 19 posterior mandibular edentulous sites requiring VRA were recruited for the study. Sites were randomly treated with either block allograft (BA; N = 9) or sandwich bone augmentation (SBA; N = 10). Clinical measurements were recorded at the time of surgery (baseline) and 6-month reentry with a custom-made acrylic surgical template. RESULTS: The mean vertical bone gain (VBG) after mean 6.8 months was 44.5% (mean = 1.78 mm [0-5 mm]) in the BA group and 33.3% (mean = 1.0 mm [-1 to 3 mm]) in the SBA group. Significantly higher rates of incision line openings and wound dehiscences were found in the BA group (n = 7/9, 77.8%) as compared with the SBA group (n = 3/10, 30%) (P = 0.037). After adjusting for graft exposure, BA group demonstrated significantly higher VBG than SBA (difference = 2.26 mm, P < 0.001). In addition, graft exposure resulted in significantly less VBG in both groups (P < 0.001). CONCLUSIONS: A higher tendency of wound exposure during VRA was demonstrated when a BA was used compared with the SBA technique. However, if wound exposure could be prevented, higher vertical ridge gain could be achieved with a BA. SUMMARY: The use of a BA in VRA resulted in a maximum of 2 mm more bone height gain compared with the SBA technique if the primary coverage can be achieved during the healing.
Asunto(s)
Aumento de la Cresta Alveolar/métodos , Trasplante Óseo/métodos , Adulto , Anciano , Desarrollo Óseo , Implantación Dental/métodos , Femenino , Humanos , Arcada Parcialmente Edéntula/cirugía , Masculino , Mandíbula/cirugía , Persona de Mediana EdadRESUMEN
PURPOSE: The degree of difficulty in performing lateral window sinus augmentation may depend on the morphology of the maxillary sinus. The aim of this was to measure the distances between the medial and lateral sinus wall (sinus width [SW]) at different levels and apply those SW values to formulate a new sinus classification. MATERIALS AND METHODS: Edentulous sites adjacent to maxillary sinuses with inadequate ridge height (RH; <10 mm) were included from cone-beam computed tomography database in the University of Michigan. SW was measured at the heights of 5, 7, 10, 13, and 15 mm from alveolar crest at the edentulous sites. Mean SW was stratified by residual RH into three different groups (group 1: <4 mm, group 2: ≥4 and <7, and group 3: ≥7 and <10), study sites (first and second premolars and molars), and measurement levels. RESULTS: Three hundred and twenty subjects (mean 50.1 years old) with 422 edentulous sites were included. Mean SW was wider at molar sites, higher measurement levels, and sites with shorter residual RH. Mean SW at the lower (average 2.3 mm from sinus floor) and higher boundary (15 mm from the alveolar crest) of lateral window osteotomy was 9.0 (2.8) and 16.0 (4.4) mm, respectively. Narrow, average, or wide sinuses were classified when the SW was <8, 8-10 and >10 mm at the lower boundary or <14, 14-17 and >17 mm at the upper boundary, respectively. CONCLUSION: SW at levels that were relevant to lateral window sinus augmentation was measured. The proposed sinus classification could facilitate communication between health providers and determine the degree of easiness of sinus augmentation. It might be particularly useful for the selection of grafting materials and surgical approaches. Further studies are required to test its clinical implications.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Seno Maxilar/diagnóstico por imagen , Elevación del Piso del Seno Maxilar , Adulto , Anciano , Femenino , Humanos , Arcada Parcialmente Edéntula/diagnóstico por imagen , Masculino , Seno Maxilar/cirugía , Persona de Mediana EdadRESUMEN
OBJECTIVES: Sandwich bone augmentation (SBA) has been proposed to augment the width of edentulous ridges for implant placement. This study aimed to investigate the effect of a membrane on SBA for the regeneration of buccal implant dehiscence defects. MATERIAL AND METHODS: Twenty-six healthy patients, each with a single defect, were randomly assigned into two groups. Both groups received an inner and outer layer of mineralized human cancellous and cortical particulate allograft. In the test group, a bovine pericardium membrane covered the bone grafts, while no membrane was placed in the control group. Cone beam computed tomography (CBCT) scans were taken before and immediately after implant placement and at 6 months post-surgery. RESULTS: All implants placed were successfully osseointegrated at 6 months. Clinical re-entry measurements showed significant buccal bone gain in the test group compared with the control group (P < 0.05). The test group had 1.12, 2.21 and 2.44 mm more buccal bone thickness at 2, 4 and 6 mm below the bone crest. There were no significant differences in the mid-buccal vertical bone height, defect height and width reductions and bone fill between the two groups (P > 0.05). Cone beam computed tomography analysis demonstrated significant buccal bone gain of 1.22 mm in the test group. Radiographic vertical bone loss at 1-year post-surgery showed no significant differences between the groups. CONCLUSION: Sandwich bone augmentation is a predictable technique for regenerating buccal bone on implant dehiscence defects. Addition of a barrier membrane prevented significant horizontal buccal bone resorption as space was maintained more effectively when compared with sites treated without a membrane.
Asunto(s)
Proceso Alveolar/diagnóstico por imagen , Aumento de la Cresta Alveolar/métodos , Trasplante Óseo/métodos , Implantación Dental Endoósea , Implantes Dentales de Diente Único , Maxilar/diagnóstico por imagen , Osteogénesis , Adulto , Proceso Alveolar/cirugía , Resorción Ósea/prevención & control , Tomografía Computarizada de Haz Cónico , Femenino , Humanos , Masculino , Maxilar/cirugía , Membranas Artificiales , Persona de Mediana Edad , Oseointegración , Resultado del TratamientoRESUMEN
BACKGROUND AND OBJECTIVE: Clinicians have difficulty assessing and monitoring early occlusal caries. Traditional clinical exam and radiographs are unable to detect the subtle alterations in enamel indicative of de- or re-mineralization, particularly under dental sealants. Although clinicians have used laser fluorescence (LF) to address this gap, this modality has demonstrated weak correlation with histology. The International Caries Detection and Assessment System (ICDAS-II) has demonstrated high sensitivity and specificity for caries detection, but since it is based on visual assessment, it is of no use in areas beneath the most commonly used dental sealants which are opaque. Optical coherence tomography (OCT) is an emergent assessment tool which has demonstrated great promise in detecting and quantifying caries, including areas beneath commonly used dental sealants and composites. However, OCT has not yet been widely integrated into clinical dental practice, perhaps because OCT imaging does not provide an easily accessible diagnostic outcome for clinicians. The objective of this ex vivo study was to use OCT-images of sound and carious occlusal surfaces in combination with a simple algorithm to compare the caries detection ability of OCT with tools clinicians may be more familiar with (LF and radiography), and with an established valid and reliable clinical assessment tool (ICDAS-II). STUDY DESIGN/MATERIALS AND METHODS: One hundred twenty extracted teeth with sound or naturally carious occlusal surfaces were imaged with OCT, LF, radiography, and examined clinically with the ICDAS-II. Teeth were randomized to one of two dental sealants recommended for use with LF. A novel simple algorithm was used to interpret OCT-based images. The accuracy of caries severity assessments of the OCT-based diagnosis, LF, ICDAS-II, and digital radiography were compared to the 4-point histological analysis gold standard. RESULTS: OCT and ICDAS-II caries severity assessments demonstrated high sensitivity (94.0%; 92.3%) and specificity (85.0%; 83.3%), LF demonstrated low sensitivity (65.2%) but high specificity (97.6%), and digital radiography demonstrated low sensitivity (67.1%) with moderate specificity (79.5%) on unsealed occlusal surfaces. OCT-based caries severity assessments of sealed teeth demonstrated high specificity (97.6%), sensitivity (89.9%), excellent positive predictive value (98.6%), and negative predictive value (83.3%). Despite our use of LF recommended dental sealants, in the presence of sealants, LF assessment of caries severity demonstrated high sensitivity (95.1%), but extremely low specificity (10.3%), positive predictive value (68.8%), and negative predictive value (50.0%). CONCLUSION: This study found that OCT-based imaging combined with a simple diagnostic algorithm accurately assessed the severity of natural early caries on occlusal surfaces in extracted teeth both in the absence and presence of dental sealant. The findings of this study support the clinical use of OCT imaging for assessment and monitoring progression of early non-cavitated caries lesions on occlusal surfaces including areas under dental sealants.
Asunto(s)
Caries Dental/diagnóstico , Caries Dental/prevención & control , Selladores de Fosas y Fisuras , Tomografía de Coherencia Óptica , Algoritmos , Humanos , Técnicas In Vitro , Valor Predictivo de las Pruebas , Radiografía Dental Digital , Sensibilidad y EspecificidadRESUMEN
OBJECTIVES: The purpose of this study was to compare student learning of cone beam computed tomography (CBCT) interpretation using immersive virtual reality (VR) and three-dimensional multiplanar (MP) reconstructions. METHODS: Sixty first-year dental students were randomly allocated to two groups, VR and MP, and underwent a one-on-one educational intervention to identify anatomic structures using CBCT data. All participants completed three multiple-choice questionnaires (MCQs) before (T1), immediately after (T2), and 2 weeks following (T3) the intervention. Additionally, pre-survey, post-survey, NASA Task Load Index (NASA-TLX), and presence questionnaires were completed. Analysis of objective measures of performance on MCQs and subjective data from the questionnaires was completed (α = 0.05). RESULTS: There was a significant increase in test performance and informational recall between T1-T2 and T1-T3 for VR and MP groups (p < 0.001). However, there were no significant differences in performance on MCQs between T2 and T3. Analysis of the Presence questionnaire indicated that the VR group felt decreased distraction (p = 0.013), increased realism (p = 0.035), and increased involvement (p = 0.047) during the educational intervention when compared with the MP group. Analysis of the NASA-TLX indicated that the VR group experienced more physical demand (p < 0.01) but similar cognitive demand when compared with the MP group. Qualitative responses indicated that the VR group had a more dynamic sense of visualization and manipulation compared to the MP group. CONCLUSION: Results from this study show that VR is as effective as traditional MP methods of CBCT interpretation learning. Further benefits of VR educational intervention include increased involvement, realism and less distraction.