Self-assembled soft alloy with Frank-Kasper phases beyond metals.

Soft building blocks, such as micelles, cells or soap bubbles, tend to adopt near-spherical geometry when densely packed together. As a result, their packing structures do not extend beyond those discovered in metallic glasses, quasicrystals and crystals. Here we report the emergence of two Frank-Kasper phases from the self-assembly of five-fold symmetric molecular pentagons. The µ phase, an important intermediate in superalloys, is indexed in soft matter, whereas the ϕ phase exhibits a structure distinct from known Frank-Kasper phases in metallic systems. We find a broad size and shape distribution of self-assembled mesoatoms formed by molecular pentagons while approaching equilibrium that contribute to the unique packing structures. This work provides insight into the manipulation of soft building blocks that deviate from the typical spherical geometry and opens avenues for the fabrication of 'soft alloy' structures that were previously unattainable in metal alloys.

Expanding quasiperiodicity in soft matter: Supramolecular decagonal quasicrystals by binary giant molecule blends.

The quasiperiodic structures in metal alloys have been known to depend on the existence of icosahedral order in the melt. Among different phases observed in intermetallics, decagonal quasicrystal (DQC) structures have been identified in many glass-forming alloys yet remain inaccessible in bulk-state condensed soft matters. Via annealing the mixture of two giant molecules, the binary system assemblies into an axial DQC superlattice, which is identified comprehensively with meso-atomic accuracy. Analysis indicates that the DQC superlattice is composed of mesoatoms with an unusually broad volume distribution. The interplays of submesoatomic (molecular) and mesoatomic (supramolecular) local packings are found to play a crucial role in not only the formation of the metastable DQC superlattice but also its transition to dodecagonal quasicrystal and Frank-Kasper σ superlattices.

Small-Angle X-ray Scattering for PEGylated Liposomal Doxorubicin Drugs: An Analytical Model Comparison Study.

Liposomal delivery systems are recognized as efficient and safe platforms for chemotherapeutic agents, with doxorubicin-loaded liposomes being the most representative nanopharmaceuticals. Characterizing the structure of liposomal nanomedicines in high spatial and temporal resolution is critical to analyze and evaluate their stability and efficacy. Small-angle X-ray scattering (SAXS) is a powerful tool increasingly used to investigate liposomal delivery systems. In this study, we chose a Doxil-like PEGylated liposomal doxorubicin (PLD) as an example and characterized the liposomal drug structure using synchrotron SAXS. Classical analytical models, including the spherical-shell or flat-slab geometries with Gaussian or uniform electron density profiles, were used to model the internal structure of the liposomal membrane. A cylinder model was applied to fit the scattering from the drug crystal loaded in the liposomes. The high-resolution structures of the original drug, Caelyx, and a similar research drug prepared in our laboratory were characterized using these analytical models. The structural parameters of PLDs, including the thickness of the liposomal membrane and morphology of the drug crystal, were further compared. The results demonstrated that both spherical-shell and flat-slab geometries with Gaussian electron density distribution were suitable to elucidate the structural features of the liposomal membrane under a certain range of scattering vectors, while models with uniform electron density distribution exhibited poor fitting performance. This study highlights the technical features of SAXS, which provides structural information at the nanoscale for liposomal drugs. The demonstrated methods are reliable and easy-to-use for the structural analysis of liposomal drugs, which are helpful for a broader application of SAXS in the production and regulation of nanopharmaceuticals.

Ion sieving in graphene oxide membranes via cationic control of interlayer spacing.

Graphene oxide membranes-partially oxidized, stacked sheets of graphene-can provide ultrathin, high-flux and energy-efficient membranes for precise ionic and molecular sieving in aqueous solution. These materials have shown potential in a variety of applications, including water desalination and purification, gas and ion separation, biosensors, proton conductors, lithium-based batteries and super-capacitors. Unlike the pores of carbon nanotube membranes, which have fixed sizes, the pores of graphene oxide membranes-that is, the interlayer spacing between graphene oxide sheets (a sheet is a single flake inside the membrane)-are of variable size. Furthermore, it is difficult to reduce the interlayer spacing sufficiently to exclude small ions and to maintain this spacing against the tendency of graphene oxide membranes to swell when immersed in aqueous solution. These challenges hinder the potential ion filtration applications of graphene oxide membranes. Here we demonstrate cationic control of the interlayer spacing of graphene oxide membranes with ångström precision using K+, Na+, Ca2+, Li+ or Mg2+ ions. Moreover, membrane spacings controlled by one type of cation can efficiently and selectively exclude other cations that have larger hydrated volumes. First-principles calculations and ultraviolet absorption spectroscopy reveal that the location of the most stable cation adsorption is where oxide groups and aromatic rings coexist. Previous density functional theory computations show that other cations (Fe2+, Co2+, Cu2+, Cd2+, Cr2+ and Pb2+) should have a much stronger cation-π interaction with the graphene sheet than Na+ has, suggesting that other ions could be used to produce a wider range of interlayer spacings.

Programming colloidal bonding using DNA strand-displacement circuitry.

As a strategy for regulating entropy, thermal annealing is a commonly adopted approach for controlling dynamic pathways in colloid assembly. By coupling DNA strand-displacement circuits with DNA-functionalized colloid assembly, we developed an enthalpy-mediated strategy for achieving the same goal while working at a constant temperature. Using this tractable approach allows colloidal bonding to be programmed for synchronization with colloid assembly, thereby realizing the optimal programmability of DNA-functionalized colloids. We applied this strategy to conditionally activate colloid assembly and dynamically switch colloid identities by reconfiguring DNA molecular architectures, thereby achieving orderly structural transformations; leveraging the advantage of room-temperature assembly, we used this method to prepare a lattice of temperature-sensitive proteins and gold nanoparticles. This approach bridges two subfields: dynamic DNA nanotechnology and DNA-functionalized colloid programming.

Unimolecular Nanoparticles toward More Precise Regulations of Self-Assembled Superlattices in Soft Matter.

The hierarchical self-assembly process opens up great potential for the construction of nanostructural superlattices. Precise regulation of self-assembled superlattices, however, remains a challenge. Even when the primary molecules are precise, the supramolecular motifs (or secondary building blocks) can vary dramatically. In the present work, we propose the concept of unimolecular nanoparticles (UMNPs). The UMNPs act as the supramolecular motif and directly pack into the superlattices. A highly branched giant molecule is presented. We systematically explore its conformations and the superlattice of this giant molecule. Moreover, intriguing complex phases are discovered when blending this UMNP with other conventional giant molecules. These binary mixtures provide direct evidence to support our previously proposed self-sorting process in the self-assembly of "soft alloys". The concept of UMNPs offers a unique approach toward more precise regulation of self-assembled superlattices in soft matter.

Soft Alloys Constructed with Distinct Mesoatoms via Self-Sorting Assembly of Giant Shape Amphiphiles.

The packing structures of spherical motifs affect the properties of resultant condensed materials such as in metal alloys. Inspired by the classic metallurgy, developing complex alloy-like packing phases in soft matter (also called "soft alloys") is promising for the next-generation superlattice engineering. Nevertheless, the formation of many alloy-like phases in single-component soft matter is usually thermodynamically unfavourable and technically challenging. Here, we utilize a novel self-sorting assembly approach to tackle this challenge in binary blends of soft matter. Two types of giant shape amphiphiles self-sort to form their discrete spherical motifs, which further simultaneously pack into alloy-like phases. Three unconventional spherical packing phases have been observed in these binary systems, including MgZn2 , NaZn13 , and CaCu5 phases. It's the first time that the CaCu5 phase is experimentally observed in soft matter. This work demonstrates a general approach to constructing unconventional spherical packing phases and other complex superlattices in soft matter.

Collective Behavior Induced Highly Sensitive Magneto-Optic Effect in 2D Inorganic Liquid Crystals.

Collective behavior widely exists in nature, ranging from the macroscopic cloud of swallows to the microscopic cloud of colloidal particles. The behavior of an individual inside the collective is distinctive from its behavior alone, as it follows its neighbors. The introduction of such collective behavior in two-dimensional (2D) materials may offer new degrees of freedom to achieve desired but unattained properties. Here, we report a highly sensitive magneto-optic effect and transmissive magneto-coloration via introduction of collective behavior into magnetic 2D material dispersions. The increase of ionic strength in the dispersion enhances the collective behavior of colloidal particles, giving rise to a magneto-optic Cotton-Mouton coefficient up to 2700 T-2 m-1 which is the highest value obtained so far, being 3 orders of magnitude larger than other known transparent media. We also reveal linear dependence of magneto-coloration on the concentration and hydration ratios of ions. Such linear dependence and the extremely large Cotton-Mouton coefficient cooperatively allow fabrication of giant magneto-birefringent devices for color-centered visual sensing.

Superlattice Engineering with Chemically Precise Molecular Building Blocks.

Correlating nanoscale building blocks with mesoscale superlattices, mimicking metal alloys, a rational engineering strategy becomes critical to generate designed periodicity with emergent properties. For molecule-based superlattices, nevertheless, nonrigid molecular features and multistep self-assembly make the molecule-to-superlattice correlation less straightforward. In addition, single component systems possess intrinsically limited volume asymmetry of self-assembled spherical motifs (also known as "mesoatoms"), further hampering novel superlattices' emergence. In the current work, we demonstrate that properly designed molecular systems could generate a spectrum of unconventional superlattices. Four categories of giant molecules are presented. We systematically explore the lattice-forming principles in unary and binary systems, unveiling how molecular stoichiometry, topology, and size differences impact the mesoatoms and further toward their superlattices. The presence of novel superlattices helps to correlate with Frank-Kasper phases previously discovered in soft matter. We envision the present work offers new insights about how complex superlattices could be rationally fabricated by scalable-preparation and easy-to-process materials.

On-line monitoring of the spatial properties of hard X-ray free-electron lasers based on a grating splitter.

X-ray free-electron lasers (XFELs) play an increasingly important role in addressing the new scientific challenges relating to their high brightness, high coherence and femtosecond time structure. As a result of pulse-by-pulse fluctuations, the pulses of an XFEL beam may demonstrate subtle differences in intensity, energy spectrum, coherence, wavefront, etc., and thus on-line monitoring and diagnosis of a single pulse are required for many XFEL experiments. Here a new method is presented, based on a grating splitter and bending-crystal analyser, for single-pulse on-line monitoring of the spatial characteristics including the intensity profile, coherence and wavefront, which was suggested and applied experimentally to the temporal diagnosis of an XFEL single pulse. This simulation testifies that the intensity distribution, coherence and wavefront of the first-order diffracted beam of a grating preserve the properties of the incident beam, by using the coherent mode decomposition of the Gaussian-Schell model and Fourier optics. Indicatively, the first-order diffraction of appropriate gratings can be used as an alternative for on-line monitoring of the spatial properties of a single pulse without any characteristic deformation of the principal diffracted beam. However, an interesting simulation result suggests that the surface roughness of gratings will degrade the spatial characteristics in the case of a partially coherent incident beam. So, there exists a suitable roughness value for non-destructive monitoring of the spatial properties of the downstream beam, which depends on the specific optical path. Here, experiments based on synchrotron radiation X-rays are carried out in order to verify this method in principle. The experimental results are consistent with the theoretical calculations.

Performance on absolute scattering intensity calibration and protein molecular weight determination at BL16B1, a dedicated SAXS beamline at SSRF.

The optical system and end-station of bending-magnet beamline BL16B1, dedicated to small-angle X-ray scattering (SAXS) at the Shanghai Synchrotron Radiation Facility, is described. Constructed in 2009 and upgraded in 2013, this beamline has been open to users since May 2009 and supports methodologies including SAXS, wide-angle X-ray scattering (WAXS), simultaneous SAXS/WAXS, grazing-incidence small-angle X-ray scattering (GISAXS) and anomalous small-angle X-ray scattering (ASAXS). Considering that an increasing necessity for absolute calibration of SAXS intensity has been recognized in in-depth investigations, SAXS intensity is re-stated according to the extent of data processing, and the absolute intensity is suggested to be a unified presentation of SAXS data in this article. Theory with a practical procedure for absolute intensity calibration is established based on BL16B1, using glass carbon and water as primary and secondary standards, respectively. The calibration procedure can be completed in minutes and shows good reliability under different conditions. An empirical line of scale factor estimation is also established for any specific SAXS setup at the beamline. Beamline performance on molecular weight (MW) determination is provided as a straightforward application and verification of the absolute intensity calibration. Results show good accuracy with a deviation of less than 10% compared with the known value, which is also the best attainable accuracy in recent studies using SAXS to measure protein MW. Fast MW measurement following the demonstrated method also enables an instant check or pre-diagnosis of the SAXS performance to improve the data acquisition.

Improving the efficiency of small-angle x-ray scattering computed tomography using the OSEM algorithm.

Small-angle x-ray scattering computed tomography (SAXS-CT) is a nondestructive method for the nanostructure analysis of heterogeneous materials. However, the limits of a long data acquisition time and vast amounts of data prevent SAXS-CT from becoming a routine experimental method in the applications of synchrotron radiation. In this study, the ordered subsets expectation maximization (OSEM) algorithm is introduced to improve the efficiency of SAXS-CT. To demonstrate the practicability of this method, a systematic simulation and experiments were carried out. The simulation results on a numerical phantom show that the OSEM-based SAXS-CT can effectively eliminate streaking artifacts and improve the efficiency of data acquisition by at least 3 times compared with the filter backprojection algorithm. By compromising the reconstruction speed and image quality, the optimal reconstruction parameters are also given for the image reconstruction in the OSEM-based SAXS-CT experiments. An experiment on a bamboo sample verified the validity of the proposed method with limited projection data. A further experiment on polyethylene demonstrated that the OSEM-based SAXS-CT is able to reveal the local nanoscale information about the crystalline structure and distributional difference inside the sample. In conclusion, the OSEM-based SAXS-CT can significantly improve experimental efficiency, which may promote SAXS-CT becoming a conventional method.

Extraction of cellulose nanofibrils from pine sawdust by integrated chemical pretreatment.

Reducing energy consumption is major challenge in the industrialization of chemical pretreatments for the extraction of cellulose nanofibrils (CNF). In this study, an integrated chemical pretreatment with alkaline/acid-chlorite/TEMPO-oxidant was used for the nano-fibrillation of CNF from pine sawdust (WS). The alkaline and acid-chlorite pretreatments effectively eliminated the non-cellulosic components present in WS, resulting in the delamination of individual cell layers and swelling of the internal structures within the cellulose fiber bundles and cellulose microfibrils that form these layers. The spacing between CNF within the cellulose microfibrils increased from 3.7 nm to 5.5 nm. These loosely packed hierarchical structures facilitated the penetration of the reagent, which led to an increase in the specific surface area during the TEMPO-oxidant reaction and consequently accelerated the reaction rate. The WS was pretreated in a very dilute solution (1 % NaOH and 0.5 % NaClO2) under mild conditions (70 °C for 1 h), which resulted in a significant reduction of the TEMPO reaction time (from 3 h to 30 min) and a lower consumption of the reaction reagent (one fourth of the amount consumed compared to the direct oxidation of WS to achieve the same degree of cellulose nano-fibrillation).

Unraveling the Stretch-Induced Microstructural Evolution and Morphology-Stretchability Relationships of High-Performance Ternary Organic Photovoltaic Blends.

The stretchability and stretch-induced structural evolution of organic solar cells (OSCs) are pivotal for their collapsible, portable, and wearable applications, and they are mainly affected by the complex morphology of active layers. Herein, a highly ductile conjugated polymer P(NDI2OD-T2) is incorporated into the active layers of high-efficiency OSCs based on nonfullerene small molecule acceptors to simultaneously investigate the morphological, mechanical, and photovoltaic properties and structural evolution under stretching of ternary blend films with various acceptor contents. The structural robustness of the blend films is indicated by their stretch-induced structural evolution, which is monitored in real-time by a combination of in situ wide/small angle X-ray scattering. It is found that adding the soft P(NDI2OD-T2) can enhance the stretchability and structural robustness of ternary blend films by more entangled chains and tie chains to dissipate strain. Furthermore, the stretchability of the ternary blends can be superbly predicted by a 3D equivalent box model. This work provides instructive insight and guidance for designing stretchable electronics and predicting the stretchability of multicomponent blends.

A novel in situ sample environment setup for combined small angle x-ray scattering (SAXS), wide-angle x-ray scattering (WAXS), and Fourier transform infrared spectrometer (FTIR) simultaneous measurement.

Developing the synchrotron radiation experiment method based on combined technology offers more information on the formation mechanism of new materials and their physical and chemical properties. In this study, a new small-angle x-ray scattering/ wide-angle x-ray scattering/ Fourier-transform infrared spectroscopy (SAXS/WAXS/FTIR) combined setup was established. Using this combined SAXS/WAXS/FTIR setup, x-ray and FTIR signals can be obtained simultaneously from the same sample. The in situ sample cell was designed to couple two FTIR optical paths for the attenuated total reflection and transmission modes, which greatly saved the time of adjusting and aligning the external infrared light path when switching between the two modes with good accuracy. A transistor-transistor logic circuit was used to trigger the synchronous acquisition from the IR and x-ray detectors. A special sample stage is designed, allowing access by the IR and x-ray with temperature and pressure control. The newly developed, combined setup can be used to observe the evolution of the microstructure during the synthesis of composite materials in real-time at both the atomic and molecular levels. The crystallization of polyvinylidene fluoride (PVDF) at different temperatures was observed. The time-dependent experimental data demonstrated the success of the in situ SAXS, WAXS, and FTIR study of the structural evolution, which is feasible to track the dynamic processes.

A facile approach for controlling the orientation of one-dimensional mesochannels in mesoporous titania films.

Controlling of the orientation of mesochannels in mesostructured thin films is important for the development of novel molecular devices and, in particular, generating vertically aligned mesochannels with respect to the substrate plane is extremely challenging for nonsiliceous materials. We describe a facile and highly effective air flow method, which is able to control the unidirectional alignment of titania mesochannels in a desired direction (e.g., parallel, perpendicular, or oblique) on a large scale, via manipulation of the air flow rate and incident angle. The titania mesochannels were characterized by TEM, SEM, SAXRD, and GISAXS. The unidirectional, vertically aligned mesostructured titania films were found to exhibit excellent ion conductivity.

In Situ Grazing-Incidence SAXS Investigation of Thermal-Induced Self-Assembly Process of PS-b-PMMA Films Deposited on Surface-Modified Substrate.

Directed self-assembly of block copolymers (BCPs) is widely investigated for its potential application in surface patterning. The self-assembly kinetics of BCP based on modified layers is the key to realizing structural control for obtaining highly ordered lamellar grains. In this study, morphological evolution of PS-b-PMMA films during the thermal-induced self-assembly process was investigated via the in situ grazing-incidence small-angle X-ray scattering (GISAXS) technique. In the first heating stage, reorientation of lamellar grains occurred as the temperature increased above the glass transition temperature. Then, a fast increase in the lamellar repeat period L0 was observed, which is considered as a phase separation process. Whereas the size of the lamellar grain ξ was observed to have rapidly increased in the stage wherein the temperature was held at 230 °C, the L0 was almost constant. This result indicates that the formation of ordered structure in PS-b-PMMA films was mainly determined by two periods: phase separation of block molecules followed by growth of grains in the nanodomain. In addition, it was interesting that the better-order nanodomains were obtained with thermal annealing at a faster heating rate. These findings suggest that accomplishing ordered structure control in a large area could be realized via the design of a proper heating profile.

Transformation Pathway from CdSe Nanoplatelets with Absorption Doublets at 373/393 nm to Nanoplatelets at 434/460 nm.

For those colloidal semiconductor CdSe nanospecies that exhibit sharp optical absorption doublets, different explanations have appeared in the literature regarding their morphological nature and formation, with no consensus reached. Here, we discuss the transformation pathway in two types of CdSe nanoplatelets (NPLs), from NPL-393 to NPL-460, exhibiting absorption doublets at 373/393 and 433/460 nm, respectively. Synchrotron-based small/wide-angle X-ray scattering (SAXS/WAXS) was performed to monitor the in situ transformation associated with the temperature. Combining the results of SAXS/WAXS, optical spectroscopy, and transmission electron microscopy, we propose that the transformation pathway experiences corresponding magic-sized clusters (MSCs), which display similar optical properties but with zero-dimensional structure. From stacked NPL-393 to stacked NPL-460, the transformation goes through sequentially individual NPL-393, MSC-393, MSC-460, and individual NPL-460 at their corresponding characteristic temperature. The present findings provide compelling evidence that both MSCs and their assembled NPLs exhibit similar optical absorption.

Hierarchically Structured Nanocellulose-Implanted Air Filters for High-Efficiency Particulate Matter Removal.

Fine particulate matter (PM) air pollution has increasingly become a global problem; thus, high-performance air filtration materials are in great demand. Herein, we first prepared a biodegradable hierarchically structured nanocellulose-implanted air filter with a high filtration capacity using a freeze-drying technique. In this hierarchically structured air filter, porous structures of corrugated paper and cellulose nanofibrils (CNFs) were used as a frame and functional fillers, respectively. The self-assembled structure of the CNF fillers could be controlled by changing the freezing temperature, CNF sizes, concentrations, and base weights. Only the CNFs with a smaller size and concentration of 0.05 wt % were able to self-assemble to well-dispersed fibril networks. With constant optimization of conditions, when the base weight went up to only 0.25 g/m2, the coverage of the corrugated paper fibers with CNF networks became perfect, and a high efficiency of 94.6% for PM0.3 removal was achieved, while maintaining a relatively low pressure drop of 174.2 Pa. All of the raw materials we used are biodegradable, nonpetroleum-based materials, contributing to sustainable development. We believe that such excellent biodegradable high-performance cellulose-based air filtration materials will provide a new direction for the application of nanocellulose in air filtration.

A tunable alkaline/oxidative process for cellulose nanofibrils exhibiting different morphological, crystalline properties.

This study describes a two-step alkali/oxidation process to efficiently convert waste sugarcane bagasse (SCB) into cellulose nanofibrils (CNF) whose structures have been characterized using a range of analytical techniques (SR-WAXS, IR, TEM and DLS). Increasing the concentration of the NaOH solution from 10 to 16 wt% in the first step results in a gradual increase in cellulose II content from 0 to >99 %, which also produces a corresponding increase in fiber crystallinity index from 32 to 61 %. Varying the concentration of NaClO used in the second oxidative step enables the morphologies of the CNF to be reliably controlled, with fiber lengths decreasing from micrometer to nanometer levels as the amount of NaClO oxidant used is increased. This simple two-step alkaline/oxidative treatment process enables SCB to be converted into CNF exhibiting different polymorphic and morphological properties, thus enabling their economic and reproducible production as nanostructured materials for numerous applications.