RESUMEN
While polymerization-induced self-assembly (PISA) has become a preferred synthetic route toward amphiphilic block copolymer self-assemblies, predicting their phase behavior from experimental design is extremely challenging, requiring time and work-intensive creation of empirical phase diagrams whenever self-assemblies of novel monomer pairs are sought for specific applications. To alleviate this burden, we develop here the first framework for a data-driven methodology for the probabilistic modeling of PISA morphologies based on a selection and suitable adaption of statistical machine learning methods. As the complexity of PISA precludes generating large volumes of training data with in silico simulations, we focus on interpretable low variance methods that can be interrogated for conformity with chemical intuition and that promise to work well with only 592 training data points which we curated from the PISA literature. We found that among the evaluated linear models, generalized additive models, and rule and tree ensembles, all but the linear models show a decent interpolation performance with around 0.2 estimated error rate and 1 bit expected cross entropy loss (surprisal) when predicting the mixture of morphologies formed from monomer pairs already encountered in the training data. When considering extrapolation to new monomer combinations, the model performance is weaker but the best model (random forest) still achieves highly nontrivial prediction performance (0.27 error rate, 1.6 bit surprisal), which renders it a good candidate to support the creation of empirical phase diagrams for new monomers and conditions. Indeed, we find in three case studies that, when used to actively learn phase diagrams, the model is able to select a smart set of experiments that lead to satisfactory phase diagrams after observing only relatively few data points (5-16) for the targeted conditions. The data set as well as all model training and evaluation codes are publicly available through the GitHub repository of the last author.
Asunto(s)
Aprendizaje Automático , Polimerizacion , Polímeros/química , Modelos LinealesRESUMEN
Biofilms are complex three-dimensional structures formed at interfaces by the vast majority of bacteria and fungi. These robust communities have an important detrimental impact on a wide range of industries and other facets of our daily lives, yet their removal is challenging owing to the high tolerance of biofilms towards conventional antimicrobial agents. This key issue has driven an urgent search for new innovative antibiofilm materials. Amongst these emerging approaches are highly promising materials that employ aqueous-soluble macromolecules, including peptides, proteins, synthetic polymers, and nanomaterials thereof, which exhibit a range of functionalities that can inhibit biofilm formation or detach and destroy organisms residing within established biofilms. In this Review, we outline the progress made in inhibiting and removing biofilms using macromolecular approaches, including a spotlight on cutting-edge materials that respond to environmental stimuli for "on-demand" antibiofilm activity, as well as synergistic multi-action antibiofilm materials. We also highlight materials that imitate and harness naturally derived species to achieve new and improved biomimetic and biohybrid antibiofilm materials. Finally, we share some speculative insights into possible future directions for this exciting and highly significant field of research.
Asunto(s)
Antiinfecciosos/farmacología , Biopelículas/efectos de los fármacos , Sustancias Macromoleculares/química , Antiinfecciosos/química , Péptidos Catiónicos Antimicrobianos/química , Péptidos Catiónicos Antimicrobianos/farmacología , Portadores de Fármacos/química , Sustancias Macromoleculares/farmacología , Staphylococcus aureus Resistente a Meticilina/aislamiento & purificación , Staphylococcus aureus Resistente a Meticilina/fisiología , Nanopartículas/química , Nanopartículas/toxicidad , Polímeros/química , Pseudomonas aeruginosa/fisiologíaRESUMEN
Understanding, predicting, and controlling the self-assembly behavior of stimuli-responsive block copolymers remains a pertinent challenge. As such, the copolymer blending protocol provides an accessible methodology for obtaining a range of intermediate polymeric nanostructures simply by blending two or more block copolymers in the desired molar ratio to target specific stimuli-responsiveness. Herein, thermoresponsive diblock copolymers are blended in various combinations to investigate whether the resultant cloud point temperature can be modulated by simple manipulation of the molar ratio. Thermoresponsive amphiphilic diblock copolymers composed of statistical poly(n-butyl acrylate-co-N,N-dimethylacrylamide) core-forming blocks and four different thermoresponsive corona-forming blocks, namely poly(diethylene glycol monomethyl ether methacrylate) (p(DEGMA)), poly(N-isopropylacrylamide), poly(N,N-diethylacrylamide), and poly(oligo(ethylene glycol) monomethyl ether methacrylate) (p(OEGMA)) are selected for evaluation. Using variable temperature turbidimetry, the thermoresponsive behavior of blended diblock copolymer self-assemblies is assessed and compared to the thermoresponsive behavior of the constituent pure diblock copolymer micelles to determine whether comicellization is achieved and more significantly, whether the two blended corona-forming thermoresponsive blocks exhibit cooperative behavior. Interestingly, blended diblock copolymer micelles composed of p(DEGMA)/p(OEGMA) mixed coronae display cooperative behavior, highlighting the potential of copolymer blending for the preparation of stimuli-responsive nanomaterials in applications such as oil recovery, drug delivery, biosensing, and catalysis.
Asunto(s)
Micelas , Polímeros/química , Polímeros/síntesis química , Acrilamidas/química , Acrilatos/química , Resinas Acrílicas/química , Metacrilatos/química , Polietilenglicoles/química , Polimerizacion , Propiedades de Superficie , TemperaturaRESUMEN
Zwitterionic polymers, including polyampholytes and polybetaines, are polymers with both positive and negative charges incorporated into their structure. They are a unique class of smart materials with great potential in a broad range of applications in nanotechnology, biomaterials science, nanomedicine and healthcare, as additives for bulk construction materials and crude oil, and in water remediation. In this Tutorial Review, we aim to highlight their structural diversity and design criteria, and their preparation using modern techniques. Their behavior, both in solution and at surfaces, will be examined under a range of environmental conditions. Finally, we will exemplify how their unique behaviors give rise to specific properties tailored to a selection of their numerous applications.
RESUMEN
Advanced applications of polymeric self-assembled structures require a stringent degree of control over such aspects as functionality location, morphology and size of the resulting assemblies. A loss of control in the polymeric building blocks of these assemblies can have drastic effects upon the final morphology or function of these structures. Gaining precise control over various aspects of the polymers, such as chain lengths and architecture, blocking efficiency and compositional distribution is a challenge and, hence, measuring the intrinsic mass and size dispersity within these areas is an important aspect of such control. It is of great importance that a good handle on how to improve control and accurately measure it is achieved. Additionally dispersity of the final structure can also play a large part in the suitability for a desired application. In this Tutorial Review, we aim to highlight the different aspects of dispersity that are often overlooked and the effect that a lack of control can have on both the polymer and the final assembled structure.
RESUMEN
Water-soluble and amphiphilic polymers are of great interest to industry and academia, as they can be used in applications such as biomaterials and drug delivery. Whilst ring-opening metathesis polymerization (ROMP) is a fast and functional group tolerant methodology for the synthesis of a wide range of polymers, its full potential for the synthesis of water-soluble polymers has yet to be realized. To address this, we report a general strategy for the synthesis of block copolymers in aqueous milieu using a commercially available ROMP catalyst and a macroinitiator approach. This allows for excellent control in the preparation of block copolymers in water. If the second monomer is chosen such that it forms a water-insoluble polymer, polymerization-induced self-assembly (PISA) occurs and a variety of self-assembled nano-object morphologies can be accessed.
RESUMEN
Polymer-drug conjugates are widely investigated to enhance the selectivity of therapeutic drugs to cancer cells, as well as increase circulation lifetime and solubility of poorly soluble drugs. In order to direct these structures selectively to cancer cells, targeting agents are often conjugated to the nanoparticle surface as a strategy to limit drug accumulation in non-cancerous cells and therefore reduce systemic toxicity. Here, we report a simple procedure to generate biodegradable polycarbonate graft copolymer nanoparticles that allows for highly efficient conjugation and intracellular release of S-(+)-camptothecin, a topoisomerase I inhibitor widely used in cancer therapy. The drug-polymer conjugate showed strong efficacy in inhibiting cell proliferation across a range of cancer cell lines over non-cancerous phenotypes, as a consequence of the increased intracellular accumulation and subsequent drug release specifically in cancer cells. The enhanced drug delivery towards cancer cells in vitro demonstrates the potential of this platform for selective treatments without the addition of targeting ligands.
Asunto(s)
Nanopartículas , Neoplasias , Humanos , Sistemas de Liberación de Medicamentos , Cemento de Policarboxilato , Neoplasias/tratamiento farmacológico , Polímeros/química , Nanopartículas/química , Concentración de Iones de Hidrógeno , Línea Celular TumoralRESUMEN
We demonstrate a modular synthesis approach to yield mesoporous carbon-coated anatase (denoted as TiO2/C) nanostructures. Combining polymerization-induced self-assembly (PISA) and reversible addition-fragmentation chain-transfer (RAFT) dispersion polymerization enabled the fabrication of uniform core-shell polymeric nanoreactors with tunable morphologies. The nanoreactors comprised of a poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) shell and a poly(benzyl methacrylate) (PBzMA) core. We selected worm-like and vesicular morphologies to guide the nanostructuring of a TiO2 precursor, namely, titanium(IV) bis(ammonium lactato)dihydroxide (TALH). Subsequent carbonization yielded nanocrystalline anatase and simultaneously introduced a porous carbon framework, which also suppressed the crystal growth (â¼5 nm crystallites). The as-prepared TiO2/C materials comprised of a porous structure, with large specific surface areas (>85 m2/g) and various carbon contents (20-30 wt %). As anode components in lithium-ion batteries, our TiO2/C nanomaterials improved the cycling stability, facilitated high overall capacities, and minimized the capacity loss compared to both their sans carbon and commercial anatase analogues.
RESUMEN
Loss of effective antibiotics through antimicrobial resistance (AMR) is one of the greatest threats to human health. By 2050, the annual death rate resulting from AMR infections is predicted to have climbed from 1.27 million per annum in 2019, up to 10 million per annum. It is therefore imperative to preserve the effectiveness of both existing and future antibiotics, such that they continue to save lives. One way to conserve the use of existing antibiotics and build further contingency against resistant strains is to develop alternatives. Non-biological complex drugs (NBCDs) are an emerging class of therapeutics that show multi-mechanistic antimicrobial activity and hold great promise as next generation antimicrobial agents. We critically outline the focal advancements for each key material class, including antimicrobial polymer materials, carbon nanomaterials, and inorganic nanomaterials, and highlight the potential for the development of antimicrobial resistance against each class. Finally, we outline remaining challenges for their clinical translation, including the need for specific regulatory pathways to be established in order to allow for more efficient clinical approval and adoption of these new technologies.
Asunto(s)
Antiinfecciosos , Farmacorresistencia Bacteriana , Antibacterianos/farmacología , Antiinfecciosos/farmacología , Humanos , PandemiasRESUMEN
[This corrects the article DOI: 10.1021/acsmacrolett.0c00461.].
RESUMEN
Inspired by the interesting natural antimicrobial properties of honey, biohybrid composite materials containing a low-fouling polymer hydrogel network and an encapsulated antimicrobial peroxide-producing enzyme have been developed. These synergistically combine both passive and active mechanisms for reducing microbial bacterial colonization. The mechanical properties of these materials were assessed using compressive mechanical analysis, which revealed these hydrogels possessed tunable mechanical properties with Young's moduli ranging from 5 to 500 kPa. The long-term enzymatic activities of these materials were also assessed over a 1-month period using colorimetric assays. Finally, the passive low-fouling properties and active antimicrobial activity against a leading opportunistic pathogen, Staphylococcus epidermidis, were confirmed using bacterial cell counting and bacterial adhesion assays. This study resulted in non-adhesive substrate-permeable antimicrobial materials, which could reduce the viability of planktonic bacteria by greater than 7 logs. It is envisaged these new biohybrid materials will be important for reducing bacterial adherence in a range of industrial applications.
Asunto(s)
Antibacterianos/farmacología , Adhesión Bacteriana , Materiales Biocompatibles/química , Miel , Hidrogeles/química , Polímeros/química , Staphylococcus epidermidis/crecimiento & desarrollo , Ensayo de Materiales , Staphylococcus epidermidis/efectos de los fármacosRESUMEN
Thermoresponsive copolymers that exhibit a lower critical solution temperature (LCST) have been exploited to prepare stimuli-responsive materials for a broad range of applications. It is well understood that the LCST of such copolymers can be controlled by tuning molecular weight or through copolymerization of two known thermoresponsive monomers. However, no general methodology has been established to relate polymer properties to their temperature response in solution. Herein, we sought to develop a predictive relationship between polymer hydrophobicity and cloud point temperature (T CP). A series of statistical copolymers were synthesized based on hydrophilic oligoethylene glycol monomethyl ether methacrylate (OEGMA) and hydrophobic alkyl methacrylate monomers and their hydrophobicity was compared using surface area-normalized partition coefficients (log P oct/SA). However, while some insight was gained by comparing T CP and hydrophobicity values, further statistical analysis on both experimental and literature data showed that the molar percentage of comonomer (i.e., grafting density) was the strongest influencer of T CP, regardless of the comonomer used. The lack of dependence of T CP on comonomer chemistry implies that a broad range of functional, thermoresponsive materials can be prepared based on OEGMA by simply tuning grafting density.
RESUMEN
The rise of antimicrobial resistance is at the forefront of global healthcare challenges, with antimicrobial infections on track to overtake cancer as a leading cause of death by 2050. The high effectiveness of antimicrobial enzymes used in combination with the protective, inert nature of polymer materials represents a highly novel approach toward tackling microbial infections. Herein, we have developed biohybrid glucose oxidase-loaded semipermeable polymersome nanoreactors, formed using polymerization-induced self-assembly, and demonstrate for the first time their ability to "switch on" their antimicrobial activity in response to glucose, a ubiquitous environmental stimulus. Using colony-counting assays, it was demonstrated that the nanoreactors facilitate up to a seven-log reduction in bacterial growth at high glucose concentrations against a range of Gram-negative and Gram-positive bacterial pathogens, including a methicillin-resistant Staphylococcus aureus clinical isolate. After demonstrating the antimicrobial properties of these materials, their toxicity against human fibroblasts was assessed and the dosage of the nanoreactors further optimized for use as nontoxic agents against Gram-positive bacteria under physiological blood glucose concentrations. It is envisaged that such biohybrid nanomaterials will become an important new class of antimicrobial biomaterials for the treatment of bacterial infections.
Asunto(s)
Antibacterianos/química , Miel , Nanoestructuras/química , Nanotecnología/métodos , Antibacterianos/metabolismo , Antibacterianos/farmacología , Bacterias/efectos de los fármacos , Reactores Biológicos , Línea Celular , Supervivencia Celular/efectos de los fármacos , Glucosa Oxidasa/química , Glucosa Oxidasa/metabolismo , Humanos , Ensayo de Materiales , Nanoestructuras/toxicidad , PolimerizacionRESUMEN
Here, we report how the stability of polyion complex (PIC) particles containing Pseudomonas aeruginosa's elastase (LasB) degradable peptides and antimicrobial poly(ethylene imine) is significantly improved by careful design of the peptide component. Three LasB-degradable peptides are reported herein, all of them carrying the LasB-degradable sequence -GLA- and for which the number of anionic amino acids and cysteine units per peptide were systematically varied. Our results suggest that while net charge and potential to cross-link via disulfide bond formation do not have a predictable effect on the ability of LasB to degrade these peptides, a significant effect of these two parameters on particle preparation and stability is observed. A range of techniques has been used to characterize these new materials and demonstrates that increasing the charge and cross-linking potential of the peptides results in PIC particles with better stability in physiological conditions and upon storage. These results highlight the importance of molecular design for the preparation of PIC particles and should underpin the future development of these materials for responsive drug delivery.
RESUMEN
Covalent PEGylation of biologics has been widely employed to reduce immunogenicity, while improving stability and half-life in vivo. This approach requires covalent protein modification, creating a new entity. An alternative approach is stabilization by encapsulation into polymersomes; however this typically requires multiple steps, and the segregation requires the vesicles to be permeable to retain function. Herein, we demonstrate the one-pot synthesis of therapeutic enzyme-loaded vesicles with size-selective permeability using polymerization-induced self-assembly (PISA) enabling the encapsulated enzyme to function from within a confined domain. This strategy increased the proteolytic stability and reduced antibody recognition compared to the free protein or a PEGylated conjugate, thereby reducing potential dose frequency and the risk of immune response. Finally, the efficacy of encapsulated l-asparaginase (clinically used for leukemia treatment) against a cancer line was demonstrated, and its biodistribution and circulation behavior in vivo was compared to the free enzyme, highlighting this methodology as an attractive alternative to the covalent PEGylation of enzymes.
RESUMEN
Polymerization-induced self-assembly (PISA) is an emerging industrially relevant technology, which allows the preparation of defined and predictable polymer self-assemblies with a wide range of morphologies. In recent years, interest has turned to photoinitiated PISA processes, which show markedly accelerated reaction kinetics and milder conditions, thereby making it an attractive alternative to thermally initiated PISA. Herein, we attempt to elucidate the differences between these two initiation methods using isothermally derived phase diagrams of a well-documented poly(ethylene glycol)-b-(2-hydroxypropyl methacrylate) (PEG-b-HPMA) PISA system. By studying the influence of the intensity of the light source used, as well as an investigation into the thermodynamically favorable morphologies, the factors dictating differences in the obtained morphologies when comparing photo- and thermally initiated PISA were explored. Our findings indicate that differences in a combination of both reaction kinetics and end group fidelity led to the observed discrepencies between the two techniques. We find that the loss of the end group in photoinitiated PISA drives the formation of higher order structures and that a morphological transition from worms to unilamellar vesicles could be induced by extended periods of light and heat irradiation. Our findings demonstrate that PISA of identical block copolymers by the two different initiation methods can lead to structures that are both chemically and morphologically distinct.
RESUMEN
Enzyme loading of polymersomes requires permeability to enable them to interact with the external environment, typically requiring addition of complex functionality to enable porosity. Herein, we describe a synthetic route towards intrinsically permeable polymersomes loaded with functional proteins using initiator-free visible light-mediated polymerization-induced self-assembly (photo-PISA) under mild, aqueous conditions using a commercial monomer. Compartmentalization and retention of protein functionality was demonstrated using green fluorescent protein as a macro-molecular chromophore. Catalytic enzyme-loaded vesicles using horseradish peroxidase and glucose oxidase were also prepared and the permeability of the membrane towards their small molecule substrates was revealed for the first time. Finally, the interaction of the compartmentalized enzymes between separate vesicles was validated by means of an enzymatic cascade reaction. These findings have a broad scope as the methodology could be applied for the encapsulation of a large range of macromolecules for advancements in the fields of nanotechnology, biomimicry and nanomedicine.
RESUMEN
The chain density of polymer micelles, dictated by their aggregation number (Nagg), is an often overlooked parameter that governs the macroscopic behavior of responsive assemblies. Using a combination of variable-temperature light scattering, turbidimetry, and microcalorimetry experiments, the cloud point and thermal collapse of micellar poly(N-isopropylacrylamide) (pNIPAM) corona chains at lower temperatures than the cloud point were found to be largely independent of the micelle's Nagg. By controlling the core composition, the degree of hysteresis associated with the thermal transition was found to increase as a function of core hydrophobicity. We performed this study on well-characterized micelles with tunable Nagg values, composed of a thermoresponsive corona (pNIPAM) and a nonresponsive core block poly(n-butyl acrylate-co-N,N-dimethylacrylamide) (p(nBA-co-DMA)), which were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. This allowed for a distinction to be made between thermoresponsive behavior at both the molecular and macroscopic level. The study of the subtle differences between these behaviors was made possible using a combination of complementary techniques. These results highlight the critical need for consideration of the effect that self-assembly plays on the responsive behavior of polymer chains when compared with free unimers in solution.