RESUMEN
We present a simple and non-destructive method for characterizing and quantifying the quality of two-dimensional (2D) close-packed arrays of submicron dielectric spheres. Utilizing radiative losses of photonic modes created by the 2D crystals into dielectric substrates we are able to monitor the quality of the particle monolayer during assembly and the size evolution of the individual particles during dry etching. Using an advanced interfacial assembly technique we prepare particle monolayers on glass and characterize the spectral behaviour of the radiative loss regarding different lattice constants, dielectric substrates and layer qualities. The effect of diameter reduction during dry etching is analysed and a simple model is proposed, which enables non-destructive, on spot characterization of the particle layer with sub-20 nm resolution using UV-vis spectroscopy.
RESUMEN
Pairs of samples containing Ag nanoparticles (NPs) of different dimensions have been produced under the same conditions but on different substrates, namely standard glass slides and a thin layer of amorphous aluminum oxide (a-Al2O3) on-glass. Upon storage in ambient conditions (air and room temperature) the color of samples changed and a blue-shift and damping of the surface plasmon resonance was observed. The changes are weaker for the samples on-glass and tend to saturate after 12 months. In contrast, the changes for the samples on a-Al2O3 appear to be still progressing after 25 months. While x-ray photoelectron spectroscopy shows a slight sulfurization and negligible oxidation of the Ag for the on-glass samples upon 25 months aging, it shows that Ag is strongly oxidized for the on a-Al2O3 samples and sulfurization is negligible. Both optical and chemical results are consistent with the production of a shell at the expense of a reduction of the metal core dimensions, the latter being responsible for the blue-shift and related to the small (<10 nm initial diameter) of the NPs. The enhanced reactivity of the Ag NPs on the a-Al2O3 supports goes along with specific morphological changes of the Ag NPs and the observation of nitrogen.
RESUMEN
This paper reports on the influence of laser irradiation onto the electrical conductance of gold nanocontacts established with the mechanically controllable breakjunction technique. We concentrate here on the study of reversible conductance changes which can be as high as 200%. We investigate the dependence on the initial conductance of the contacts, the wavelength, the intensity and position of the laser spot with respect to the sample. Under most conditions an enhancement of the conductance is observed. We discuss several physical mechanisms which might contribute to the observed effect including thermal expansion, rectification and photon-assisted transport. We conclude that thermal expansion is not the dominating one.
RESUMEN
Femtosecond time-resolved photoelectron spectroscopy is applied to study relaxation paths of excited states of mass-selected negatively charged clusters. As a first example, the lifetime of an excited state of the carbon trimer anion is measured directly. In addition, the mechanism of the decay, i.e., the configurations of the participating electronic states, is determined from the photoelectron spectra. In general, this method can be used to study all kinds of electronic excitation and relaxation processes in mass-selected nanoparticles.
RESUMEN
Single pulse laser interference lithography is used to structure self-assembled monolayers of thiols on gold. This structuring process is investigated by attenuated total reflection measurements, and a demixing process of a binary polymer blend is used to visualize the produced surface energy pattern. The lithography can be realized with different wavelengths (266, 532, and 1064 nm) which shows that the structuring is a thermal process. As a first demonstration of this process, structures down to 800 nm period and 300 nm width are fabricated.
Asunto(s)
Oro/química , Difusión , Diseño de Equipo , Rayos Láser , Ensayo de Materiales , Microscopía de Fuerza Atómica , Modelos Estadísticos , Conformación Molecular , Distribución Normal , Fotoquímica/métodos , Polímeros/química , Compuestos de Sulfhidrilo/química , Propiedades de Superficie , Temperatura , TermodinámicaRESUMEN
This Letter reports on the influence of laser irradiation onto the electrical conductance of gold nanocontacts established with the mechanically controllable break-junction technique. We concentrate on the study of reversible conductance changes which can be as high as 200%. We investigate the dependence on the initial conductance of the contacts, and on the wavelength, the intensity, and the position of the laser spot with respect to the sample. Under most conditions an enhancement of the conductance is observed. Several physical mechanisms which might contribute to the observed effect including thermal expansion, rectification, plasmon excitation, and photon-assisted transport are discussed, among which the two latter ones are most likely the dominating ones.
Asunto(s)
Transporte de Electrón , Luz , Conductividad Eléctrica , Oro , Rayos LáserRESUMEN
Flat gold nanostructures on inert substrates like glass or graphite were illuminated by single intensive laser pulses with fluences above the gold melting threshold. The liquid structures produced in this way are far from their equilibrium shape, and a dewetting process sets in. On a time scale of a few nanoseconds, the liquid contracted toward a sphere. During this contraction, the center of mass moved upward, which could lead to detachment of droplets from the surface due to inertia. The resulting velocities were on the order of 10 meters per second for droplets with radii in the range of 100 nanometers.
RESUMEN
We report on a method that allows the nanostructuring of surfaces with intense laser pulses. For this purpose isolated polystyrene spheres with diameters in the order of the laser wavelength were deposited on a silicon or glass surface. Illumination with short and ultrashort laser pulses produced holes underneath these particles. Calculations of the field near the particles make clear that geometrical optics, that is, focusing by a spherical lens, as well as near-field effects, contribute to the size and shape of these holes. This technique can be utilized for the parallel structuring of large surface areas with a single laser shot.
RESUMEN
The temperature dependence of the optical properties for amorphous silicon is studied at wavelengths of 632.8 and 752 nm. Both the refractive index and extinction coefficient increase linearly with temperature for 752 nm, while the refractive index decreases and the extinction coefficient increases for 632.8 nm. The rate of increase of the extinction coefficient at 632.8 nm is twice as much as that for 752 nm.