Rapid cGMP manufacturing of COVID-19 monoclonal antibody using stable CHO cell pools.

Therapeutic proteins, including monoclonal antibodies, are typically manufactured using clonally derived, stable host cell lines, since consistent and predictable cell culture performance is highly desirable. However, selecting and preparing banks of stable clones takes considerable time, which inevitably extends overall development timelines for new therapeutics by delaying the start of subsequent activities, such as the scale-up of manufacturing processes. In the context of the coronavirus disease 2019 (COVID-19) pandemic, with its intense pressure for accelerated development strategies, we used a novel transposon-based Leap-In Transposase® system to rapidly generate high-titer stable pools and then used them directly for large scale-manufacturing of an anti-severe acute respiratory syndrome coronavirus 2 monoclonal antibody under cGMP. We performed the safety testing of our non-clonal cell bank, then used it to produce material at a 200L-scale for preclinical safety studies and formulation development work, and thereafter at 2000L scale for supply of material for a Phase 1 clinical trial. Testing demonstrated the comparability of critical product qualities between the two scales and, more importantly, that our final clinical trial product met all pre-set product quality specifications. The above expediated approach provided clinical trial material within 4.5 months, in comparison to 12-14 months for production of clinical trial material via the conventional approach.

Process-wide control and automation of an integrated continuous manufacturing platform for antibodies.

Integrated continuous manufacturing is entering the biopharmaceutical industry. The main drivers range from improved economics, manufacturing flexibility, and more consistent product quality. However, studies on fully integrated production platforms have been limited due to the higher degree of system complexity, limited process information, disturbance, and drift sensitivity, as well as difficulties in digital process integration. In this study, we present an automated end-to-end integrated process consisting of a perfusion bioreactor, CaptureSMB, virus inactivation (VI), and two polishing steps to produce an antibody from an instable cell line. A supervisory control and data acquisition (SCADA) system was developed, which digitally integrates unit operations and analyzers, collects and centrally stores all process data, and allows process-wide monitoring and control. The integrated system consisting of bioreactor and capture step was operated initially for 4 days, after which the full end-to-end integrated run with no interruption lasted for 10 days. In response to decreasing cell-specific productivity, the supervisory control adjusted the loading duration of the capture step to obtain high capacity utilization without yield loss and constant antibody quantity for subsequent operations. Moreover, the SCADA system coordinated VI neutralization and discharge to enable constant loading conditions on the polishing unit. Lastly, the polishing was sufficiently robust to cope with significantly increased aggregate levels induced on purpose during virus inactivation. It is demonstrated that despite significant process disturbances and drifts, a robust process design and the supervisory control enabled constant (optimum) process performance and consistent product quality.

Understanding mAb aggregation during low pH viral inactivation and subsequent neutralization.

Monoclonal antibodies (mAbs) and related recombinant proteins continue to gain importance in the treatment of a great variety of diseases. Despite significant advances, their manufacturing can still present challenges owing to their molecular complexity and stringent regulations with respect to product purity, stability, safety, and so forth. In this context, protein aggregates are of particular concern due to their immunogenic potential. During manufacturing, mAbs routinely undergo acidic treatment to inactivate viral contamination, which can lead to their aggregation and thereby to product loss. To better understand the underlying mechanism so as to propose strategies to mitigate the issue, we systematically investigated the denaturation and aggregation of two mAbs at low pH as well as after neutralization. We observed that at low pH and low ionic strength, mAb surface hydrophobicity increased whereas molecular size remained constant. After neutralization of acidic mAb solutions, the fraction of monomeric mAb started to decrease accompanied by an increase on average mAb size. This indicates that electrostatic repulsion prevents denatured mAb molecules from aggregation under acidic pH and low ionic strength, whereas neutralization reduces this repulsion and coagulation initiates. Limiting denaturation at low pH by d-sorbitol addition or temperature reduction effectively improved monomer recovery after neutralization. Our findings might be used to develop innovative viral inactivation procedures during mAb manufacturing that result in higher product yields.

Process design and development of a mammalian cell perfusion culture in shake-tube and benchtop bioreactors.

The development of mammalian cell perfusion cultures is still laborious and complex to perform due to the limited availability of scale-down models and limited knowledge of time- and cost-effective procedures. The maximum achievable viable cell density (VCDmax ), minimum cell-specific perfusion rate (CSPRmin ), cellular growth characteristics, and resulting bleed rate at steady-state operation are key variables for the effective development of perfusion cultures. In this study, we developed a stepwise procedure to use shake tubes (ST) in combination with benchtop (BR) bioreactors for the design of a mammalian cell perfusion culture at high productivity (23 pg·cell-1 ·day-1 ) and low product loss in the bleed (around 10%) for a given expression system. In a first experiment, we investigated peak VCDs in STs by the daily discontinuous medium exchange of 1 reactor volume (RV) without additional bleeding. Based on this knowledge, we performed steady-state cultures in the ST system using a working volume of 10 ml. The evaluation of the steady-state cultures allowed performing a perfusion bioreactor run at 20 × 106 cells/ml at a perfusion rate of 1 RV/day. Constant cellular environment and metabolism resulted in stable product quality patterns. This study presents a promising strategy for the effective design and development of perfusion cultures for a given expression system and underlines the potential of the ST system as a valuable scale-down tool for perfusion cultures.

Generation of site-distinct N-glycan variants for in vitro bioactivity testing.

Glycosylation, a critical product quality attribute, may affect the efficacy and safety of therapeutic proteins in vivo. Chinese hamster ovary fed-batch cell culture batches yielded consistent glycoprofiles of a Fc-fusion antibody comprizing three different N-glycosylation sites. By adding media supplements at specific concentrations in cell culture and applying enzymatic glycoengineering, a diverse N-glycan variant population was generated, including high mannose, afucosylated, fucosylated, agalactosylated, galactosylated, asialylated, and sialylated forms. Site-specific glycosylation profiles were elucidated by glycopeptide mapping and the effect of the glycosylation variants on the FcγRIIIa receptor binding affinity and the biological activity (cell-based and surface plasmon resonance) was assessed. The two fusion body glycosylation sites were characterized by a high degree of sialic acid, more complex N-glycan structures, a higher degree of antennarity, and a site-specific behavior in the presence of a media supplement. On the other hand, the media supplements affected the Fc-site glycosylation heterogeneity similarly to the various studies described in the literature with classical monoclonal antibodies. Enzymatic glycoengineering solely managed to generate high levels of galactosylation at the fusion body sites. Variants with low core fucosylation, and to a lower extent, high mannose glycans exhibited increased FcγRIIIa receptor binding affinity. All N-glycan variants exhibited weak effects on the biological activity of the fusion body. Both media supplementation and enzymatic glycoengineering are suitable to generate sufficient diversity to assess the effect of glycostructures on the biological activity.

Development of a shake tube-based scale-down model for perfusion cultures.

The use of benchtop bioreactors (BRs) for the development of mammalian cell perfusion cultures is expensive and time consuming, given its complexity in equipment and operation. Scale-down models, going from liter to milliliter scale, are needed to support the rapid determination of suitable operating conditions in terms of viable cell density (VCD), perfusion rate, and medium composition. In this study, we compare the performance of steady-state perfusion cultures in orbitally shaken tube and BR systems for a given Chinese hamster ovary cell line. The developed scale-down model relied on a daily workflow designed to keep the VCD constant at specific target values. This includes: cell count, removal of excessive cells (bleeding), spin down of remaining cells, harvest of cell-free supernatant, and resuspension in fresh medium. Steady-state cultures at different VCD values, medium exchange rates and working volumes were evaluated. Shake-tube perfusion cultures allowed the prediction of cell-specific growth, glucose consumption, ammonia, and monoclonal antibody production rates for much larger BRs, but not lactate (LAC) production rates. Although charge variant profiles remained comparable, different glycosylation patterns were obtained. The differences in LAC production and glycosylation probably resulted from the discontinuous medium exchange, the poor carbon dioxide removal, and the deficient pH control. Therefore, if requested by the specific process to be developed, product quality has to be fine-tuned directly in the BR system. Altogether, the developed strategy provides a useful scale-down model for the design and optimization of perfusion cultures with strong savings in time and media consumption.

Glycosylation flux analysis reveals dynamic changes of intracellular glycosylation flux distribution in Chinese hamster ovary fed-batch cultures.

N-linked glycosylation of proteins has both functional and structural significance. Importantly, the glycan structure of a therapeutic protein influences its efficacy, pharmacokinetics, pharmacodynamics and immunogenicity. In this work, we developed glycosylation flux analysis (GFA) for predicting intracellular production and consumption rates (fluxes) of glycoforms, and applied this analysis to CHO fed-batch immunoglobulin G (IgG) production using two different media compositions, with and without additional manganese feeding. The GFA is based on a constraint-based modeling of the glycosylation network, employing a pseudo steady state assumption. While the glycosylation fluxes in the network are balanced at each time point, the GFA allows the fluxes to vary with time by way of two scaling factors: (1) an enzyme-specific factor that captures the temporal changes among glycosylation reactions catalysed by the same enzyme, and (2) the cell specific productivity factor that accounts for the dynamic changes in the IgG production rate. The GFA of the CHO fed-batch cultivations showed that regardless of the media composition, galactosylation fluxes decreased with the cultivation time more significantly than the other glycosylation reactions. Furthermore, the GFA showed that the addition of Mn, a cofactor of galactosyltransferase, has the effect of increasing the galactosylation fluxes but only during the beginning of the cultivation period. The results thus demonstrated the power of the GFA in delineating the dynamic alterations of the glycosylation fluxes by local (enzyme-specific) and global (cell specific productivity) factors.

Parallel experimental design and multivariate analysis provides efficient screening of cell culture media supplements to improve biosimilar product quality.

Rational and high-throughput optimization of mammalian cell culture media has a great potential to modulate recombinant protein product quality. We present a process design method based on parallel design-of-experiment (DoE) of CHO fed-batch cultures in 96-deepwell plates to modulate monoclonal antibody (mAb) glycosylation using medium supplements. To reduce the risk of losing valuable information in an intricate joint screening, 17 compounds were separated into five different groups, considering their mode of biological action. The concentration ranges of the medium supplements were defined according to information encountered in the literature and in-house experience. The screening experiments produced wide glycosylation pattern ranges. Multivariate analysis including principal component analysis and decision trees was used to select the best performing glycosylation modulators. Subsequent D-optimal quadratic design with four factors (three promising compounds and temperature shift) in shake tubes confirmed the outcome of the selection process and provided a solid basis for sequential process development at a larger scale. The glycosylation profile with respect to the specifications for biosimilarity was greatly improved in shake tube experiments: 75% of the conditions were equally close or closer to the specifications for biosimilarity than the best 25% in 96-deepwell plates. Biotechnol. Bioeng. 2017;114: 1448-1458. © 2017 Wiley Periodicals, Inc.

Modulation and modeling of monoclonal antibody N-linked glycosylation in mammalian cell perfusion reactors.

Mammalian cell perfusion cultures are gaining renewed interest as an alternative to traditional fed-batch processes for the production of therapeutic proteins, such as monoclonal antibodies (mAb). The steady state operation at high viable cell density allows the continuous delivery of antibody product with increased space-time yield and reduced in-process variability of critical product quality attributes (CQA). In particular, the production of a confined mAb N-linked glycosylation pattern has the potential to increase therapeutic efficacy and bioactivity. In this study, we show that accurate control of flow rates, media composition and cell density of a Chinese hamster ovary (CHO) cell perfusion bioreactor allowed the production of a constant glycosylation profile for over 20 days. Steady state was reached after an initial transition phase of 6 days required for the stabilization of extra- and intracellular processes. The possibility to modulate the glycosylation profile was further investigated in a Design of Experiment (DoE), at different viable cell density and media supplement concentrations. This strategy was implemented in a sequential screening approach, where various steady states were achieved sequentially during one culture. It was found that, whereas high ammonia levels reached at high viable cell densities (VCD) values inhibited the processing to complex glycan structures, the supplementation of either galactose, or manganese as well as their synergy significantly increased the proportion of complex forms. The obtained experimental data set was used to compare the reliability of a statistical response surface model (RSM) to a mechanistic model of N-linked glycosylation. The latter outperformed the response surface predictions with respect to its capability and reliability in predicting the system behavior (i.e., glycosylation pattern) outside the experimental space covered by the DoE design used for the model parameter estimation. Therefore, we can conclude that the modulation of glycosylation in a sequential steady state approach in combination with mechanistic model represents an efficient and rational strategy to develop continuous processes with desired N-linked glycosylation patterns. Biotechnol. Bioeng. 2017;114: 1978-1990. © 2017 Wiley Periodicals, Inc.

Pilot-scale verification of maximum tolerable hydrodynamic stress for mammalian cell culture.

Although several scaling bioreactor models of mammalian cell cultures are suggested and described in the literature, they mostly lack a significant validation at pilot or manufacturing scale. The aim of this study is to validate an oscillating hydrodynamic stress loop system developed earlier by our group for the evaluation of the maximum operating range for stirring, based on a maximum tolerable hydrodynamic stress. A 300-L pilot-scale bioreactor for cultivation of a Sp2/0 cell line was used for this purpose. Prior to cultivations, a stress-sensitive particulate system was applied to determine the stress values generated by stirring and sparging. Pilot-scale data, collected from 7- to 28-Pa maximum stress conditions, were compared with data from classical 3-L cultivations and cultivations from the oscillating stress loop system. Results for the growth behavior, analyzed metabolites, productivity, and product quality showed a dependency on the different environmental stress conditions but not on reactor size. Pilot-scale conditions were very similar to those generated in the oscillating stress loop model confirming its predictive capability, including conditions at the edge of failure.

Effects of the COVID-19 pandemic: new approaches for accelerated delivery of gene to first-in-human CMC data for recombinant proteins.

The COVID-19 pandemic highlighted the urgent need for life-saving treatments, including vaccines, drugs, and therapeutic antibodies, delivered at unprecedented speed. During this period, recombinant antibody research and development cycle times were substantially shortened without compromising quality and safety, thanks to prior knowledge of Chemistry, Manufacturing and Controls (CMC) and integration of new acceleration concepts discussed below. Early product knowledge, selection of a parental cell line with appropriate characteristics, and the application of efficient approaches for generating manufacturing cell lines and manufacturing drug substance from non-clonal cells for preclinical and first-in-human studies are key elements for success. Prioritization of established manufacturing and analytical platforms, implementation of advanced analytical methods, consideration of new approaches for adventitious agent testing and viral clearance studies, and establishing stability claim with less real-time data are additional components that enable an accelerated successful gene to clinical-grade material development strategy.

Transfer of continuous manufacturing process principles for mAb production in a GMP environment: A step in the transition from batch to continuous.

Implementation of continuous in lieu of batch upstream processing (USP) and downstream process (DSP) for the production of recombinant therapeutic protein is a significant paradigm change. The present report describes how the first kilograms of monoclonal antibody were produced with equipment originally designed for batch operations while using continuous manufacturing processes and principles. Project timelines for the delivery of clinical material have driven this ambition and helped the transition. Nevertheless, because of equipment availability, a tradeoff between the envisaged continuous downstream process (cDSP) operations and the ones described in this article had to be taken. A total of 2.1 kg of monoclonal antibody were produced in two GMP runs for clinical trials. For USP, a 200-L single-use pilot scale bioreactor was upgraded to enable perfusion operation. DSP steps were designed to be easily transferable to cDSP for later clinical or commercial productions. An in-line conditioning buffer preparation strategy was tested in a discontinuous way to prove its efficiency and the purification cascade was structured in parallel to the continuous collection of antibody-containing cell culture supernatant. This strategy will avoid any process change when later moving to the continuous equipment that is currently under qualification. Alignment between small-scale references runs and the GMP runs in terms of productivity and quality confirmed that the presented approach was valid. Thus, we demonstrate that existing fed-batch infrastructure can be adapted to continuous manufacturing without significant additional investments. Such approach is useful to evaluate next-generation manufacturing processes before making large investments.

Current views on N-glycolylneuraminic acid in therapeutic recombinant proteins.

The incorporation of the non-human N-glycolylneuraminic acid (Neu5Gc) in therapeutic recombinant proteins raises clinical concerns due to its immunogenic potential and the high prevalence of pre-existing anti-Neu5Gc antibodies in humans. The scientific literature is ambiguous regarding the actual impact of Neu5Gc-containing biotherapeutics as no severe adverse clinical manifestations were unequivocally attributed to Neu5Gc for currently marketed biotherapeutics. This review discusses structural and functional considerations of Neu5Gc-containing glycans regarding the potential impact on drug clearance, their recognition by pre-existing antibodies, and recent hypotheses regarding the tolerance to low Neu5Gc levels. Furthermore, it provides recommendations regarding the standardization of analysis and reporting, analytical aspects relevant for assessing risks associated with Neu5Gc-containing biotherapeutics, and approaches to minimize Neu5Gc incorporation in recombinant protein manufacturing.

Reduction of medium consumption in perfusion mammalian cell cultures using a perfusion rate equivalent concentrated nutrient feed.

Media preparation for perfusion cell culture processes contributes significantly to operational costs and the footprint of continuous operations for therapeutic protein manufacturing. In this study, definitions are given for the use of a perfusion equivalent nutrient feed stream which, when used in combination with basal perfusion medium, supplements the culture with targeted compounds and increases the medium depth. Definitions to compare medium and feed depth are given in this article. Using a concentrated nutrient feed, a 1.8-fold medium consumption (MC) decrease and a 1.67-fold increase in volumetric productivity (PR) were achieved compared to the initial condition. Later, this strategy was used to push cell densities above 100 × 106 cells/ml while using a perfusion rate below 2 RV/day. In this example, MC was also decreased 1.8-fold compared to the initial condition, but due to the higher cell density, PR was increased 3.1-fold and to an average PR value of 1.36 g L-1 day-1 during a short stable phase, and versus 0.46 g L-1 day-1 in the initial condition. Overall, the performance improvements were aligned with the given definitions. This multiple feeding strategy can be applied to gain some flexibility during process development and also in a manufacturing set-up to enable better control on nutrient addition.

The Formidable Challenge of Controlling High Mannose-Type N-Glycans in Therapeutic mAbs.

The clinical efficacy and safety of therapeutic monoclonal antibodies (mAbs) are significantly affected by their Fc-glycosylation profile. High mannose-type N-glycans (HM) affect efficacy (in terms of antibody-dependent cell cytotoxicity), pharmacokinetics, and stability. While in endogenous IgGs the HM levels are very low, they are significantly higher in marketed therapeutic mAbs. In order to meet the demands for late-phase clinical trial and market supply, process intensification is required. Since glycosylation profiles are sensitive to process variations and changes, controlling HM levels in robust manufacturing processes presents a formidable challenge and requires a thorough understanding of the cellular processes as well as the biotechnical aspects that govern the production of HM glycans.

Cell culture process metabolomics together with multivariate data analysis tools opens new routes for bioprocess development and glycosylation prediction.

Multivariate latent variable methods have become a popular and versatile toolset to analyze bioprocess data in industry and academia. This work spans such applications from the evaluation of the role of the standard process variables and metabolites to the metabolomics level, that is, to the extensive number metabolic compounds detectable in the extracellular and intracellular domains. Given the substantial effort currently required for the measurement of the latter groups, a tailored methodology is presented that is capable of providing valuable process insights as well as predicting the glycosylation profile based on only four experiments measured over 12 cell culture days. An important result of the work is the possibility to accurately predict many of the glycan variables based on the information of three experiments. An additional finding is that such predictive models can be generated from the more accessible process and extracellular information only, that is, without including the more experimentally cumbersome intracellular data. With regards to the incorporation of omics data in the standard process analytics framework in the future, this works provides a comprehensive data analysis pathway which can efficiently support numerous bioprocessing tasks.

Degradation of an Fc-fusion recombinant protein by host cell proteases: Identification of a CHO cathepsin D protease.

A host-cell-related proteolytic activity was identified in a recombinant Fc-fusion protein production process. This report describes the strategy applied to characterize and isolate the enzyme responsible for this degradation by combining cell culture investigation and dedicated analytical tools. After isolation and sequencing of the clipped fragment generated in post-capture material, enzymatic activity was traced in different culture conditions, allowing identification of viable CHO cells as the source of protease. Inhibitors and pH screenings showed that the enzyme belongs to an aspartic protease family and is preferably active at acidic pH. The protease was isolated by purification on a pepstatin A column and characterized as a protein related to cathepsin D. An additional metallo-protease inhibited by EDTA was identified with an optimum activity at neutral pH. This study is an example of how quality and stability of therapeutic recombinant molecules are strongly influenced by cell culture parameters.

Experimental Evaluation of the Impact of Intrinsic Process Parameters on the Performance of a Continuous Chromatographic Polishing Unit (MCSGP).

The semicontinuous twin-column multicolumn countercurrent solvent gradient purification (MCSGP) process improves the trade-off between purity and yield encountered in traditional batch chromatography, while its complexity, in terms of hardware requirements and process design, is reduced in comparison to process variants using more columns. In this study, the MCSGP process is experimentally characterized, specifically with respect to its unique degrees of freedom, i.e., the four switching times, which alternate the columns between interconnected and batch states. By means of isolation of the main charge isoform of an antibody, it is shown that purity is determined by the selection of the product collection window with negligible influence from the recycle phases. In addition, the amount of weak and strong impurities can be specifically attributed to the start and end of the collection, respectively. Due to higher abundance of weakly adsorbing impurities, the start of product collection influences productivity and yield more than the other switching times. Furthermore, most of the encountered tendencies scale between different loadings. The found trends can be rationalized from the corresponding batch chromatogram and therefore used during process design to obtain desirable process performances without extensive trial-and-error experimentation or complete model development and calibration.

Semi-continuous scale-down models for clone and operating parameter screening in perfusion bioreactors.

Perfusion cell culture, confined traditionally to the production of fragile molecules, is currently gaining broader attention in the biomanufacturing of therapeutic proteins. The development of these processes is made difficult by the limited availability of appropriate scale-down models. This is due to the continuous operation that requires complex control and cell retention capacity. For example, the determination of an optimal perfusion and bleed rate for continuous cell culture is often performed in scale-down bioreactors and requires a substantial amount of time and effort. To increase the experimental throughput and decrease the required workload, a semi-continuous procedure, referred to as the VCDmax (viable cell density) approach, has been developed on the basis of shake tubes (ST) and deepwell plates (96-DWP). Its effectiveness has been demonstrated for 12 different CHO-K1-SV cell lines expressing an IgG1. Further, its reliability has been investigated through proper comparisons with perfusion runs in lab-scale bioreactors. It was found that the volumetric productivity and the CSPRmin (cell specific perfusion rate) determined using the ST and 96-DWP models were successfully (mostly within the experimental error) confirmed in lab-scale bioreactors, which then covered a significant scale-up from the half milliliter to the liter scale. These scale-down models are very useful to design and scale-up optimal bioreactor operating conditions as well as screening for different media and cell lines.

Perfusion cell culture for the production of conjugated recombinant fusion proteins reduces clipping and quality heterogeneity compared to batch-mode processes.

Perfusion cell culture technologies for the production of therapeuthic recombinant proteins are currently on the rise for diverse applications with the aim of process intensification (Bielser et al., 2018; Chen et al., 2018; Fisher et al., 2018; Jordan et al., 2018). This study reports a unique comparison of low (LS) and high (HS) seeding fed-batch bioreactors, corresponding to traditional and intensified operation using perfusion at the N-1 stage, respectively, with perfusion (PF) bioreactors, using a bispecific conjugated fusion protein as a model. It is found that the gain in daily volumetric productivity compared to the traditional LS fed-batch, increases by a factor 3 with HS and 7 with PF. Critical quality attributes (CQAs) also benefited from the perfusion operation. In particular, levels of clipping, that is the fragmentation of the fusion protein, are significantly reduced compared to both fed-batch operations. In PF the clipping varied between 0.6 and 1.5% while in the LS and HS it reached up to 8.7 and 4.9%, respectively. Aggregate levels were also decreased using PF, while the charge variant distribution was more homogeneous and the glycosylation pattern was also significantly affected. The comparison of LS, HS and PF for the manufacturing of a bispecific conjugated fusion protein reported here highlight some productivity and quality benefits inherent to the nature of continuous processing.