Design and Experimental Study of a Large Beam Waist Streak Tube in an ICF Experiment.

In order to realize in situ multi-frame framing, this paper designed and developed a large-waist framing converter tube. The size ratio between the waist and the object was about 1.16:1. The subsequent test results showed that the static spatial resolution of the tube could reach 10 lp/mm (@ 72.5%) under the premise of this adjustment, and the transverse magnification could reach 2.9. Once the MCP (Micro Channel Plate) traveling wave gating unit is equipped at the output end, it is expected to promote the further development of in situ multi-frame framing technology.

Secondary Amplifier Sampling Component Design of an X-ray Framing Detector Based on a Streak Tube.

The development of inertial confinement fusion (ICF) experiments necessitates the diagnostic instrument to have multiple frames with a high spatial and temporal resolution for the two-dimensional detection of the hot spot at the implosion end of the ICF. The existing sampling two-dimensional imaging technology in the world has superior performance; however, its subsequent development requires a streak tube with large lateral magnification. In this work, an electron beam separation device was designed and developed for the first time. The device can be used without changing the structure of the streak tube. It can be combined directly with the corresponding device and matched with a special control circuit. Based on the original transverse magnification, 1.77 times the secondary amplification can be achieved, which is conducive to expanding the recording range of the technology. The experimental results showed that the static spatial resolution of the streak tube after the inclusion of the device can still reach 10 lp/mm.

Experimental measurement of the meridian Petzval image plane of a streak tube.

For an electron-optical imaging system with wide beam focusing, the calculation of the field curvature can be performed only theoretically and requires the specific analytical expressions of the axial potential distribution in the streak tube and its corresponding derivatives, making the calculation cumbersome. Even when the electron trajectory is tracked using the numerical calculation method, the calculated results cannot be verified experimentally. A method for measuring the field curvature of the streak tube based on the spherical fluorescent screen is proposed for the first time, to the best of our knowledge. This method can directly measure the field curvature from the experimental image without requiring information on the internal structure of the streak tube, which is extremely useful for the design of the subsequent image reconstruction algorithm.