RESUMEN
Diabetic foot ulcers (DFU) are among the most common complications in diabetic patients and affect 6.8% of people worldwide. Challenges in the management of this disease are decreased blood diffusion, sclerotic tissues, infection, and antibiotic resistance. Hydrogels are now being used as a new treatment option since they can be used for drug delivery and to improve wound healing. This project aims to combine the properties of hydrogels based on chitosan (CHT) and the polymer of ß cyclodextrin (PCD) for local delivery of cinnamaldehyde (CN) in diabetic foot ulcers. This work consisted of the development and characterisation of the hydrogel, the evaluation of the CN release kinetics and cell viability (on a MC3T3 pre-osteoblast cell line), and the evaluation of the antimicrobial and antibiofilm activity (S. aureus and P. aeruginosa). The results demonstrated the successful development of a cytocompatible (ISO 10993-5) injectable hydrogel with antibacterial (99.99% bacterial reduction) and antibiofilm activity. Furthermore, a partial active molecule release and an increase in hydrogel elasticity were observed in the presence of CN. This leads us to hypothesise that a reaction between CHT and CN (a Schiff base) can occur and that CN could act as a physical crosslinker, thus improving the viscoelastic properties of the hydrogel and limiting CN release.
RESUMEN
This work focuses on the manufacture of core-sheath nanofibers (NFs) based on chitosan (CHT) as sheath and cyclodextrin polymer (PCD) as core and loaded with triclosan (TCL). In parallel, monolithic NFs consisting of blended CHT-PCD and TCL were prepared. Nanofibers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier Transform Infrared spectroscopy (FTIR). SEM displayed the morphology of NFs and the structure of the nanowebs, while TEM evidenced the core-sheath structure of NFs prepared by coaxial electrospinning. The core diameters and sheath thicknesses were found dependent on respective flow rates of both precursor solutions. Nanofibers stability and TCL release in aqueous medium were studied and correlated with the antibacterial activity against Staphylococcus aureus and Escherichia coli. Results showed that the release profiles of TCL and therefore the antibacterial activity were directly related to the type of nanofibers. In the case of monolithic nanofibers, the NFs matrix was composed of polyelectrolyte complex (PEC formed between CHT and PCD) and resulted in a prolonged release of TCL and a sustained antibacterial effect. In the case of core-sheath NFs, the PEC was formed only at the core-sheath interface, leading to less stable NFs and therefore to a faster release of TCL, and to a less extended antibacterial activity compared to monolithic ones.
RESUMEN
We report the influence of treatment time of electrospun chitosan nanofibers (CHT NFs) in dopamine hydrochloride bath (2 mg.mL-1 in 10 mM Tris buffer, pH 8.5) on the extent of the polydopamine (pDA) coating on NFs surface. The reaction was characterized by FTIR and SEM analysis and the cytocompatibility of the scaffolds toward MT3C3-E1 cells was assessed. Biomimetic deposition of hydroxyapatite (HA) in 1.5xSBF batch was investigated by SEM-EDS and XRD. Samples treated in dopamine bath during 2 h promoted the structural stability of NFs in PBS, provided optimal cytocompatibility and induced the in vitro biomineralization from 6 days in 1.5xSBF. The XRD and SEM-EDS investigations confirmed formation of spherical-shaped particles composed of apatitic phase. Finally, this study shows that these NFs-pDA scaffolds prepared in the optimal experimental conditions defined here are promising candidates for application as osteoinductive scaffolds for bone regeneration applied to orthopedic and dental applications.
Asunto(s)
Regeneración Ósea/efectos de los fármacos , Quitosano/química , Indoles/química , Nanofibras/química , Polímeros/química , Andamios del Tejido/química , Animales , Línea Celular , Quitosano/farmacología , Durapatita/química , Indoles/farmacología , Ratones , Microscopía Electrónica de Rastreo/métodos , Osteogénesis/efectos de los fármacos , Polímeros/farmacología , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Ingeniería de Tejidos/métodosRESUMEN
The elaboration of catalytic composite nanofibers (NFs) by electrospinning through a one-pot strategy is described. First, aqueous colloidal suspensions of ruthenium nanoparticles (Ru NPs) formed by reduction of a Ru(iii) salt with NaBH4 and stabilized by poly(cyclodextrin citrate) (PCD) were prepared. Then, poly(vinyl alcohol) (PVA) of different molecular weights was dissolved in the colloidal suspensions that were electrospun. SEM analyses of the resulting nanowebs displayed uniform NFs, whose diameters ranged between 300 and 700 nm and enlarged upon increasing (i) PVA molecular weight, (ii) nanosuspension viscosity, (iii) the amount of NaBH4 and (iv) the PCD/Ru NP concentration. TEM analysis confirmed that Ru NPs with a mean diameter of around 2 nm were observed at the surface of NFs, embedded in the PVA matrix of NFs. HAADF-STEM and EDS mapping clearly showed that Ru NPs were homogeneously distributed onto and into the matrix of NFs. After their electrospinning, the prepared nanowebs were submitted to a heat post-treatment at 160 °C which was shown to trigger the PVA crystallization. In addition, the physical crosslinking of PVA chains by NaBO2 resulting from NaBH4 oxidation in the precursor suspension was also observed. Interestingly, an SEM study evidenced that the thermal post-treatment in combination with the presence of NaBO2 clearly improved the thermal stability of the synthesized composite nanowebs. Finally, catalytic hydrogenation tests showed the absence of Ru NPs leaching from NFs in the reaction medium, and displayed good conversion of styrene into ethylbenzene.
RESUMEN
Infections represent a major medical concern and have severe impact on the public health economy. Antimicrobial coatings represent one major solution and are the subject of many investigations in academic and industrial research. Polyelectrolyte multilayers (PEMs) consist in the step-by-step deposition of polyanions and polycations films on surfaces. The wide range of disposable polyelectrolytes makes this approach among the most versatile methods as it allows to design surfaces that prevent bacterial adhesion, and kill bacteria by contact or by releasing antibacterial agents. The present work focused on the release-killing effect of an active PEM coating of a polyethylene terephthalate (PET) textile support. This activity was obtained thanks to the PEM film build up using cationic and anionic polyelectrolytes both based on cyclodextrins (PCD- and PCD+) that provided a reservoir property and prolonged release of triclosan (TCS). To this effect, a PET non-woven preliminarily modified with carboxylate groups by applying a thermofixation process was then treated by dip-coating, alternating soaking cycles in cationic PCD+ and in anionic PCD- solutions. Samples coated with such PEM film were then loaded with TCS whose release was assessed in dynamic mode in a phosphate buffered saline solution (PBS) at 37 °C. In parallel, TCS/PCD+ and TCS/PCD- interactions were investigated by Nuclear Magnetic Resonance (NMR) and phase solubility study, and the biocide activity was assessed against S. aureus and E. coli. Finally, the present study has demonstrated that our PCD+/PCD- PEM system presented release-killing properties that supplement the contact-killing effect of this system that was reported in a previous paper.
Asunto(s)
Ciclodextrinas , Escherichia coli , Polielectrolitos , Staphylococcus aureus , TextilesRESUMEN
The main cause of failure of angioplasty stenting is restenosis due to neointimal hyperplasia, a too high proliferation of smooth muscle cells (SMC). The local and sustained delivery of selective pleiotropic drugs to limit SMC proliferation seems to be the hopeful solution to minimize this post surgery complication. The aim of this study is to develop a stent covered by nanofibers (NFs) produced by electrospinning, loaded with simvastatin (SV), a drug commonly used for restenosis prevention. NFs were prepared from the electrospinning of a solution containing SV and a mixture of chitosan (cationic) and ß-cyclodextrin (CD) polymer (anionic) which form together a polyelectrolyte complex that makes up the NFs matrix. First, the SV/CD interactions were studied by phase solubility diagram, DRX and DSC. The electrospinning process was then optimized to cover a self-expandable NiTiNOL stent and the mechanical resistance of the NFs sheath upon its introduction inside the delivery catheter was considered, using a crimper apparatus. The morphology, coating thicknesses and diameters of nanofibers were studied by scanning electron microscopy. The SV loading rates on the stents were controlled by the electrospinning time, and the presence of SV in the NFs was confirmed by FTIR. NFs stability in PBS pH 7.4 buffer could be improved after thermal post-treatment of NFs and in vitro release of SV in dynamic conditions demonstrated that the release profiles were influenced by the presence of CD polymer in NFs and by the thickness of the NFs sheath. Finally, a covered stent delivering 3 µg/mm2 of SV within 6 h was obtained, whose efficiency will be investigated in a further in vivo study.
Asunto(s)
Angioplastia/instrumentación , Quitosano/química , Portadores de Fármacos , Stents Liberadores de Fármacos , Inhibidores de Hidroximetilglutaril-CoA Reductasas/administración & dosificación , Inhibidores de Hidroximetilglutaril-CoA Reductasas/química , Nanofibras , Stents Metálicos Autoexpandibles , Simvastatina/química , beta-Ciclodextrinas/química , Aleaciones , Preparaciones de Acción Retardada , Composición de Medicamentos , Liberación de Fármacos , Cinética , Modelos Químicos , Diseño de Prótesis , Simvastatina/administración & dosificación , Solubilidad , Propiedades de SuperficieRESUMEN
Injectable pre-formed physical hydrogels provide many advantages for biomedical applications. Polyelectrolyte complexes (PEC) formed between cationic chitosan (CHT) and anionic polymers of cyclodextrin (PCD) render a hydrogel of great interest. Given the difference between water-soluble (PCDs) and water-insoluble PCD (PCDi) in the extension of polymerization, the present study aims to explore their impact on the formation and properties of CHT/PCD hydrogel obtained from the variable ratios of PCDi and PCDs in the formulation. Hydrogels CHT/PCDi/PCDs at weight ratios of 3:0:3, 3:1.5:1.5, and 3:3:0 were elaborated in a doubleâ»syringe system. The chemical composition, microstructure, viscoelastic properties, injectability, and structural integrity of the hydrogels were investigated. The cytotoxicity of the hydrogel was also evaluated by indirect contact with pre-osteoblast cells. Despite having similar shearâ»thinning and self-healing behaviors, the three hydrogels showed a marked difference in their rheological characteristics, injectability, structural stability, etc., depending on their PCDi and PCDs contents. Among the three, all the best above-mentioned properties, in addition to a high cytocompatibility, were found in the hydrogel 3:1.5:1.5. For the first time, we gained a deeper understanding of the role of the PCDi/PCDs in the injectable pre-formed hydrogels (CHT/PCDi/PCDs), which could be further fine-tuned to enhance their performance in biomedical applications.
RESUMEN
Environmental regulation and depletion of fossil resources are boosting the search for new polymeric materials produced from biomass. Here, the synthesis of a new diester bearing a pendant lactam unit from methyl levulinate and aspartic acid is reported. The palladium-catalyzed reductive amination/cyclization sequence was carefully optimized to afford the diacid with high yield (>95 %). In a second step, the compound was esterified to give the corresponding diester. The latter monomer was copolymerized with α-ω linear diols, yielding polyesters with molecular weights up to 20.5â kg mol-1 .
RESUMEN
This work firstly aimed to synthesize mono- and di- sulfonic derivatives of chitosan by reductive amination reaction using respectively 2-formyl benzene sulfonic acid and 2,4 formyl benzene sulfonic acid sodium salts. The influence of the reactants molar ratio (R), aryl - substituted amino groups versus chitosan free amino groups, on the degree of substitution (DS) of both sulfonated chitosans was assessed by 1H NMR, elemental analysis, coupled conductometry-potentiometry analysis and UV spectrometry and FTIR. The influence of pH on sulfonated chitosans' properties in solution were investigated by solubility and zeta potential (ZP) studies, size exclusion chromatography equipped with MALLS detection (SEC-MALLS) and Taylor dispersion analysis (TDA). The polyampholytic character of both series was evidenced and strongly modified the solutions properties compared to chitosan. Then, the anticoagulant properties of mono- and di- sulfonic polymers were investigated by the measurement of the activated partial thromboplastin time (aPTT), Prothrombin-time (PT) and anti-(factor Xa).
Asunto(s)
Anticoagulantes/síntesis química , Anticoagulantes/farmacología , Quitosano/síntesis química , Quitosano/farmacología , Ácidos Sulfónicos/química , Anticoagulantes/química , Técnicas de Química Sintética , Quitosano/química , Humanos , Concentración de Iones de Hidrógeno , Peso Molecular , Solubilidad , Agua/químicaRESUMEN
Chitosan (CS) presents antibacterial, mucoadhesive and hemostatic properties and is an ideal candidate for wound dressing applications. This work reports the development of sponge-like materials obtained from physical hydrogels after the interaction between CS and a ß-cyclodextrin polymer (PCD) in acidic conditions to provoke immediate gelation. Characterization consisted of zeta potential (ZP) measurements, rheology analysis, Fourier transform infrared (FTIR), Raman spectroscopy, wide angle X-ray scattering (WAXS) and scanning electron microscopy (SEM). Swelling behavior, cytotoxicity, drug sorption and drug delivery properties of sponges were assessed. ZP indicated that CS and PCD presented opposite charges needed for physical crosslinking. Rheology, swelling, and cytotoxicity of sponges depended on their CS:PCD weight ratios. Increasing PCD in the mixture delayed the gel time, reduced the swelling and increased the cytotoxicity. FTIR and Raman confirmed the physical crosslinking between CS and PCD through ionic interactions, and WAXS showed the amorphous state of the sponges. Finally, the efficiency of chlorhexidine loaded sponge against S. aureus bacteria was proved for up to 30days in agar diffusion tests.
Asunto(s)
Vendajes , Celulosa/química , Quitosano/química , Ciclodextrinas/química , Microscopía Electrónica de Rastreo , Polímeros , Dispersión de Radiación , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Staphylococcus aureusRESUMEN
A ß-cyclodextrin (ß-CD) polymer obtained by crosslinking ß-CD with citric acid in its water-insoluble (PCD-I) and soluble (PCD-S) forms was used as a multifunctional direct compression excipient for tablet designing. PCD-I powder was obtained after grinding the solid fraction through a 200µm grid. PCD-S powder was recovered after lyophilization or spray drying of the PCD-S aqueous solutions, eventually followed by a wet granulation step. Both PCD-I and PCD-S powders were characterized, separately and mixed in variable ratios, based on dynamic water vapor sorption, SEM, particle size distribution, tapped density, compressibility, and flowability. PCD-I and spray dried and lyophilized/wet granulated PCD-S, as well as the mixture PCD-I/PCD-S=90/10, presented optimal free flowing characteristics. Then, PCD-I or PCD-S powders - separately or mixed in variable ratios - were used for tablets preparation by direct compression without adding any other excipient (e.g. binder, lubricant, disintegrant etc). As PCD-I decreased, tablets resistance to crushing and disintegration time increased from 15s to 15min (against 30min for ß-CD), showing the improved disintegrant functionality of PCD-I, that rapidly swelled once in contact with water. Finally, PCD was force-fed to Sprague-Dawley rats (2g/kg) which were then observed during 14days for any clinical signs of toxicity.
Asunto(s)
Celulosa/química , Ácido Cítrico/química , Ciclodextrinas/química , Excipientes/química , Animales , Peso Corporal/efectos de los fármacos , Peso Corporal/fisiología , Celulosa/toxicidad , Ácido Cítrico/toxicidad , Ciclodextrinas/toxicidad , Composición de Medicamentos , Excipientes/toxicidad , Tamaño de la Partícula , Ratas , Ratas Sprague-Dawley , Comprimidos , Difracción de Rayos XRESUMEN
This work focuses on the relevance of antibacterial nanofibers based on a polyelectrolyte complex formed between positively charged chitosan (CHT) and an anionic hydroxypropyl betacyclodextrin (CD)-citric acid polymer (PCD) complexing triclosan (TCL). The study of PCD/TCL inclusion complex and its release in dynamic conditions, a cytocompatibility study, and finally the antibacterial activity assessment were studied. The fibers were obtained by electrospinning a solution containing chitosan mixed with PCD/TCL inclusion complex. CHT/TCL and CHT-CD/TCL were also prepared as control samples. The TCL loaded nanofibers were analyzed by Scanning Electron Microscopy (SEM), Fourier Transformed Infrared spectroscopy (FTIR) and X-Ray Diffraction (XRD). Nanofibers stability and swelling behavior in aqueous medium were pH and CHT:PCD weight ratio dependent. Such results confirmed that CHT and PCD interacted through ionic interactions, forming a polyelectrolyte complex. A high PCD content in addition to a thermal post treatment at 90°C were necessary to reach a nanofibers stability during 15days in soft acidic conditions, at pH=5.5. In dynamic conditions (USP IV system), a prolonged release of TCL with a reduced burst effect was observed on CHT-PCD polyelectrolyte complex based fibers compared to CHT-CD nanofibers. These results were confirmed by a microbiology study showing prolonged antibacterial activity of the nanofibers against Escherichia coli and Staphylococcus aureus. Such results could be explained by the fact that the stability of the polyelectrolyte CHT-PCD complex in the nanofibers matrix prevented the diffusion of the PCD/triclosan inclusion complex in the supernatant, on the contrary of the similar system including cyclodextrin in its monomeric form.
Asunto(s)
Antibacterianos/química , Nanofibras/química , Triclosán/química , Animales , Antibacterianos/administración & dosificación , Línea Celular , Supervivencia Celular/efectos de los fármacos , Celulosa/administración & dosificación , Celulosa/química , Quitosano/administración & dosificación , Quitosano/química , Ciclodextrinas/administración & dosificación , Ciclodextrinas/química , Liberación de Fármacos , Estabilidad de Medicamentos , Escherichia coli/efectos de los fármacos , Ratones , Nanofibras/administración & dosificación , Polielectrolitos/administración & dosificación , Polielectrolitos/química , Solubilidad , Staphylococcus aureus/efectos de los fármacos , Tecnología Farmacéutica , Triclosán/administración & dosificaciónRESUMEN
The coating of a nonwoven textile by polyelectrolyte multilayer film (PEM) issued from cationic and anionic ß-cyclodextrin (ßCD) polyelectrolytes according to the layer-by-layer (LbL) technique was successfully attempted. The tert-butyl benzoic acid (TBBA) was used as drug model to evaluate the loading capacity and sustained release properties of this PEM system. The build-up of the multilayer assembly was monitored in situ by optical waveguide lightmode spectroscopy (OWLS) on the one hand, and was assessed by gravimetry on the other hand when applied onto the textile substrate. In parallel, the complexation study of TBBA with both CD polyelectrolytes was also investigated by nuclear magnetic resonance (NMR) and isothermal titration calorimetry (ITC). The influence of thermal crosslinking of the multilayered coating on its stability and on TBBA release kinetics in phosphate buffered saline (PBS) at 37°C was studied. Finally, biological and microbiological tests were performed to investigate the cytocompatibility and the intrisic antibacterial activity of multilayer assemblies. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1408-1424, 2016.
Asunto(s)
Sistemas de Liberación de Medicamentos , Polielectrolitos/química , Textiles , beta-Ciclodextrinas/química , Antibacterianos/farmacología , Benzoatos/química , Calorimetría , Línea Celular , Supervivencia Celular/efectos de los fármacos , Reactivos de Enlaces Cruzados/química , Epiclorhidrina/química , Humanos , Cinética , Espectroscopía de Resonancia Magnética , Espectrometría RamanRESUMEN
The aim of this work was to develop the formation of multilayered coating incorporating a cyclodextrin polyelectrolyte onto a non-woven polyethylene terephthalate (PET) textile support in order to obtain reservoir and sustained release properties towards bioactive molecules. We optimized the multilayer assembly immobilization onto the PET surface according to the layer-by-layer (LbL) deposition process. After a pre-treatment of the textile support aiming to offer a sufficient ionic character to the surface, it was alternatively immersed into two polyelectrolytes aqueous solutions consisting of chitosan (CHT) as polycation on the one hand, and a ß-cyclodextrin polymer (polyCTR-ßCD) as polyanion on the other hand. In a second approach, a TBBA/polyCTR-ßCD complex (4-tert-butylbenzoic acid, TBBA) was used in order to load the system with a drug model whose kinetics of release was assessed. Gravimetry, microscopy, OWLS, colorimetric titration, infrared and zetametry were used as characterization techniques. An effective deposition on the textile surface due to ionic interactions with alternation of up to 10 layers of each of both polyelectrolytes was clearly evidenced. However, we observed that layer formation occurred to a lesser extent when TBBA/polyCTR-ßCD complex was applied instead of polyCTR-ßCD alone. The release study showed that drug reservoir properties and release kinetics could be controlled by the number of layers in the system and that TBBA release was faster than the multilayered coating degradation.
Asunto(s)
Portadores de Fármacos/química , beta-Ciclodextrinas/química , Benzoatos/química , Quitosano/química , Preparaciones de Acción Retardada/química , Cinética , Tereftalatos Polietilenos/química , TextilesRESUMEN
We describe the application of the LCST of a naphthalene-functionalised polyNIPAM derivative as a convenient, tuneable and reversible method to disrupt complex formation with CBPQT(4+) in water.