Inertial Measurement Unit-Based Frozen Shoulder Identification from Daily Shoulder Tasks Using Machine Learning Approaches.

Frozen shoulder (FS) is a common shoulder condition accompanied by shoulder pain and a loss of shoulder range of motion (ROM). The typical clinical assessment tools such as questionnaires and ROM measurement are susceptible to subjectivity and individual bias. To provide an objective evaluation for clinical assessment, this study proposes an inertial measurement unit (IMU)-based identification system to automatically identify shoulder tasks whether performed by healthy subjects or FS patients. Two groups of features (time-domain statistical features and kinematic features), seven machine learning (ML) techniques, and two deep learning (DL) models are applied in the proposed identification system. For the experiments, 24 FS patients and 20 healthy subjects were recruited to perform five daily shoulder tasks with two IMUs attached to the arm and the wrist. The results demonstrate that the proposed system using deep learning presented the best identification performance using all features. The convolutional neural network achieved the best identification accuracy of 88.26%, and the multilayer perceptron obtained the best F1 score of 89.23%. Further analysis revealed that the identification performance based on wrist features had a higher accuracy compared to that based on arm features. The system's performance using time-domain statistical features has better discriminability in terms of identifying FS compared to using kinematic features. We demonstrate that the implementation of the IMU-based identification system using ML is feasible for FS assessment in clinical practice.

Multiphase Identification Algorithm for Fall Recording Systems Using a Single Wearable Inertial Sensor.

Fall-related information can help clinical professionals make diagnoses and plan fall prevention strategies. The information includes various characteristics of different fall phases, such as falling time and landing responses. To provide the information of different phases, this pilot study proposes an automatic multiphase identification algorithm for phase-aware fall recording systems. Seven young adults are recruited to perform the fall experiment. One inertial sensor is worn on the waist to collect the data of body movement, and a total of 525 trials are collected. The proposed multiphase identification algorithm combines machine learning techniques and fragment modification algorithm to identify pre-fall, free-fall, impact, resting and recovery phases in a fall process. Five machine learning techniques, including support vector machine, k-nearest neighbor (kNN), naïve Bayesian, decision tree and adaptive boosting, are applied to identify five phases. Fragment modification algorithm uses the rules to detect the fragment whose results are different from the neighbors. The proposed multiphase identification algorithm using the kNN technique achieves the best performance in 82.17% sensitivity, 85.74% precision, 73.51% Jaccard coefficient, and 90.28% accuracy. The results show that the proposed algorithm has the potential to provide automatic fine-grained fall information for clinical measurement and assessment.

Fluid Intake Monitoring System Using a Wearable Inertial Sensor for Fluid Intake Management.

Fluid intake is important for people to maintain body fluid homeostasis. Inadequate fluid intake leads to negative health consequences, such as headache, dizziness and urolithiasis. However, people in busy lifestyles usually forget to drink sufficient water and neglect the importance of fluid intake. Fluid intake management is important to assist people in adopting individual drinking behaviors. This work aims to propose a fluid intake monitoring system with a wearable inertial sensor using a hierarchical approach to detect drinking activities, recognize sip gestures and estimate fluid intake amount. Additionally, container-dependent amount estimation models are developed due to the influence of containers on fluid intake amount. The proposed fluid intake monitoring system could achieve 94.42% accuracy, 90.17% sensitivity, and 40.11% mean absolute percentage error (MAPE) for drinking detection, gesture spotting and amount estimation, respectively. Particularly, MAPE of amount estimation is improved approximately 10% compared to the typical approaches. The results have demonstrated the feasibility and the effectiveness of the proposed fluid intake monitoring system.

Automatic Functional Shoulder Task Identification and Sub-task Segmentation Using Wearable Inertial Measurement Units for Frozen Shoulder Assessment.

Advanced sensor technologies have been applied to support frozen shoulder assessment. Sensor-based assessment tools provide objective, continuous and quantitative information for evaluation and diagnosis. However, the current tools for assessment of functional shoulder tasks mainly rely on manual operation. It may cause several technical issues to the reliability and usability of the assessment tool, including manual bias during the recording and additional efforts for data labeling. To tackle these issues, this pilot study aims to propose an automatic functional shoulder task identification and sub-task segmentation system using inertial measurement units to provide reliable shoulder task labeling and sub-task information for clinical professionals. The proposed method combines machine learning models and rule-based modification to identify shoulder tasks and segment sub-tasks accurately. A hierarchical design is applied to enhance the efficiency and performance of the proposed approach. Nine healthy subjects and nine frozen shoulder patients are invited to perform five common shoulder tasks in the lab-based and clinical environments, respectively. The experimental results show that the proposed method can achieve 87.11% F-score for shoulder task identification, and 83.23% F-score and 427 mean absolute time errors (milliseconds) for sub-task segmentation. The proposed approach demonstrates the feasibility of the proposed method to support reliable evaluation for clinical assessment.

Subtask Segmentation of Timed Up and Go Test for Mobility Assessment of Perioperative Total Knee Arthroplasty.

Total knee arthroplasty (TKA) is one of the most common treatments for people with severe knee osteoarthritis (OA). The accuracy of outcome measurements and quantitative assessments for perioperative TKA is an important issue in clinical practice. Timed up and go (TUG) tests have been validated to measure basic mobility and balance capabilities. A TUG test contains a series of subtasks, including sit-to-stand, walking-out, turning, walking-in, turning around, and stand-to-sit tasks. Detailed information about subtasks is essential to aid clinical professionals and physiotherapists in making assessment decisions. The main objective of this study is to design and develop a subtask segmentation approach using machine-learning models and knowledge-based postprocessing during the TUG test for perioperative TKA. The experiment recruited 26 patients with severe knee OA (11 patients with bilateral TKA planned and 15 patients with unilateral TKA planned). A series of signal-processing mechanisms and pattern recognition approaches involving machine learning-based multi-classifiers, fragmentation modification and subtask inference are designed and developed to tackle technical challenges in typical classification algorithms, including motion variability, fragmentation and ambiguity. The experimental results reveal that the accuracy of the proposed subtask segmentation approach using the AdaBoost technique with a window size of 128 samples is 92%, which is an improvement of at least 15% compared to that of the typical subtask segmentation approach using machine-learning models only.

Multi-Sensor Fusion Approach for Improving Map-Based Indoor Pedestrian Localization.

The interior space of large-scale buildings, such as hospitals, with a variety of departments, is so complicated that people may easily lose their way while visiting. Difficulties in wayfinding can cause stress, anxiety, frustration and safety issues to patients and families. An indoor navigation system including route planning and localization is utilized to guide people from one place to another. The localization of moving subjects is a critical-function component in an indoor navigation system. Pedestrian dead reckoning (PDR) is a technology that is widely employed for localization due to the advantage of being independent of infrastructure. To improve the accuracy of the localization system, combining different technologies is one of the solutions. In this study, a multi-sensor fusion approach is proposed to improve the accuracy of the PDR system by utilizing a light sensor, Bluetooth and map information. These simple mechanisms are applied to deal with the issue of accumulative error by identifying edge and sub-edge information from both Bluetooth and the light sensor. Overall, the accumulative error of the proposed multi-sensor fusion approach is below 65 cm in different cases of light arrangement. Compared to inertial sensor-based PDR system, the proposed multi-sensor fusion approach can improve 90% of the localization accuracy in an environment with an appropriate density of ceiling-mounted lamps. The results demonstrate that the proposed approach can improve the localization accuracy by utilizing multi-sensor data and fulfill the feasibility requirements of localization in an indoor navigation system.

Significant Change Spotting for Periodic Human Motion Segmentation of Cleaning Tasks Using Wearable Sensors.

The proportion of the aging population is rapidly increasing around the world, which will cause stress on society and healthcare systems. In recent years, advances in technology have created new opportunities for automatic activities of daily living (ADL) monitoring to improve the quality of life and provide adequate medical service for the elderly. Such automatic ADL monitoring requires reliable ADL information on a fine-grained level, especially for the status of interaction between body gestures and the environment in the real-world. In this work, we propose a significant change spotting mechanism for periodic human motion segmentation during cleaning task performance. A novel approach is proposed based on the search for a significant change of gestures, which can manage critical technical issues in activity recognition, such as continuous data segmentation, individual variance, and category ambiguity. Three typical machine learning classification algorithms are utilized for the identification of the significant change candidate, including a Support Vector Machine (SVM), k-Nearest Neighbors (kNN), and Naive Bayesian (NB) algorithm. Overall, the proposed approach achieves 96.41% in the F1-score by using the SVM classifier. The results show that the proposed approach can fulfill the requirement of fine-grained human motion segmentation for automatic ADL monitoring.

Novel Hierarchical Fall Detection Algorithm Using a Multiphase Fall Model.

Falls are the primary cause of accidents for the elderly in the living environment. Reducing hazards in the living environment and performing exercises for training balance and muscles are the common strategies for fall prevention. However, falls cannot be avoided completely; fall detection provides an alarm that can decrease injuries or death caused by the lack of rescue. The automatic fall detection system has opportunities to provide real-time emergency alarms for improving the safety and quality of home healthcare services. Two common technical challenges are also tackled in order to provide a reliable fall detection algorithm, including variability and ambiguity. We propose a novel hierarchical fall detection algorithm involving threshold-based and knowledge-based approaches to detect a fall event. The threshold-based approach efficiently supports the detection and identification of fall events from continuous sensor data. A multiphase fall model is utilized, including free fall, impact, and rest phases for the knowledge-based approach, which identifies fall events and has the potential to deal with the aforementioned technical challenges of a fall detection system. Seven kinds of falls and seven types of daily activities arranged in an experiment are used to explore the performance of the proposed fall detection algorithm. The overall performances of the sensitivity, specificity, precision, and accuracy using a knowledge-based algorithm are 99.79%, 98.74%, 99.05% and 99.33%, respectively. The results show that the proposed novel hierarchical fall detection algorithm can cope with the variability and ambiguity of the technical challenges and fulfill the reliability, adaptability, and flexibility requirements of an automatic fall detection system with respect to the individual differences.

Data Collection and Analysis Using Wearable Sensors for Monitoring Knee Range of Motion after Total Knee Arthroplasty.

Total knee arthroplasty (TKA) is the most common treatment for degenerative osteoarthritis of that articulation. However, either in rehabilitation clinics or in hospital wards, the knee range of motion (ROM) can currently only be assessed using a goniometer. In order to provide continuous and objective measurements of knee ROM, we propose the use of wearable inertial sensors to record the knee ROM during the recovery progress. Digitalized and objective data can assist the surgeons to control the recovery status and flexibly adjust rehabilitation programs during the early acute inpatient stage. The more knee flexion ROM regained during the early inpatient period, the better the long-term knee recovery will be and the sooner early discharge can be achieved. The results of this work show that the proposed wearable sensor approach can provide an alternative for continuous monitoring and objective assessment of knee ROM recovery progress for TKA patients compared to the traditional goniometer measurements.

Respiratory Rate Estimation by Using ECG, Impedance, and Motion Sensing in Smart Clothing.

The needs for light-weight and soft smart clothing in homecare have been rising since the past decade. Many smart textile sensors have been developed and applied to automatic physiological and user-centered environmental status recognition. In the present study, we propose wearable multi-sensor smart clothing for homecare monitoring based on an economic fabric electrode with high elasticity and low resistance. The wearable smart clothing integrated with heterogeneous sensors is capable to measure multiple human biosignals (ECG and respiration), acceleration, and gyro information. Five independent respiratory signals (electric impedance plethysmography, respiratory induced frequency variation, respiratory induced amplitude variation, respiratory induced intensity variation, and respiratory induced movement variation) are obtained. The smart clothing can provide accurate respiratory rate estimation by using three different techniques (Naïve Bayes inference, static Kalman filter, and dynamic Kalman filter). During the static sitting experiments, respiratory induced frequency variation has the best performance; whereas during the running experiments, respiratory induced amplitude variation has the best performance. The Naïve Bayes inference and dynamic Kalman filter have shown good results. The novel smart clothing is soft, elastic, and washable and it is suitable for long-term monitoring in homecare medical service and healthcare industry.

A Fuzzy Logic Prompting Mechanism Based on Pattern Recognition and Accumulated Activity Effective Index Using a Smartphone Embedded Sensor.

Sufficient physical activity can reduce many adverse conditions and contribute to a healthy life. Nevertheless, inactivity is prevalent on an international scale. Improving physical activity is an essential concern for public health. Reminders that help people change their health behaviors are widely applied in health care services. However, timed-based reminders deliver periodic prompts suffer from flexibility and dependency issues which may decrease prompt effectiveness. We propose a fuzzy logic prompting mechanism, Accumulated Activity Effective Index Reminder (AAEIReminder), based on pattern recognition and activity effective analysis to manage physical activity. AAEIReminder recognizes activity levels using a smartphone-embedded sensor for pattern recognition and analyzing the amount of physical activity in activity effective analysis. AAEIReminder can infer activity situations such as the amount of physical activity and days spent exercising through fuzzy logic, and decides whether a prompt should be delivered to a user. This prompting system was implemented in smartphones and was used in a short-term real-world trial by seventeenth participants for validation. The results demonstrated that the AAEIReminder is feasible. The fuzzy logic prompting mechanism can deliver prompts automatically based on pattern recognition and activity effective analysis. AAEIReminder provides flexibility which may increase the prompts' efficiency.

Wearable sensor-based rehabilitation exercise assessment for knee osteoarthritis.

Since the knee joint bears the full weight load of the human body and the highest pressure loads while providing flexible movement, it is the body part most vulnerable and susceptible to osteoarthritis. In exercise therapy, the early rehabilitation stages last for approximately six weeks, during which the patient works with the physical therapist several times each week. The patient is afterwards given instructions for continuing rehabilitation exercise by him/herself at home. This study develops a rehabilitation exercise assessment mechanism using three wearable sensors mounted on the chest, thigh and shank of the working leg in order to enable the patients with knee osteoarthritis to manage their own rehabilitation progress. In this work, time-domain, frequency-domain features and angle information of the motion sensor signals are used to classify the exercise type and identify whether their postures are proper or not. Three types of rehabilitation exercise commonly prescribed to knee osteoarthritis patients are: Short-Arc Exercise, Straight Leg Raise, and Quadriceps Strengthening Mini-squats. After ten subjects performed the three kinds of rehabilitation activities, three validation techniques including 10-fold cross-validation, within subject cross validation, and leave-one-subject cross validation are utilized to confirm the proposed mechanism. The overall recognition accuracy for exercise type classification is 97.29% and for exercise posture identification it is 88.26%. The experimental results demonstrate the feasibility of the proposed mechanism which can help patients perform rehabilitation movements and progress effectively. Moreover, the proposed mechanism is able to detect multiple errors at once, fulfilling the requirements for rehabilitation assessment.

Inertial Measurement Unit-Based Romberg Test for Assessing Adults With Vestibular Hypofunction.

This work aims to explore the utility of wearable inertial measurement units (IMUs) for quantifying movement in Romberg tests and investigate the extent of movement in adults with vestibular hypofunction (VH). A cross-sectional study was conducted at an academic tertiary medical center between March 2021 and April 2022. Adults diagnosed with unilateral vestibular hypofunction (UVH) or bilateral vestibular hypofunction (BVH) were enrolled in the VH group. Healthy controls (HCs) were recruited from community or outpatient clinics. The IMU-based instrumented Romberg and tandem Romberg tests on the floor were applied to both groups. The primary outcomes were kinematic body metrics (maximum acceleration [ACC], mean ACC, root mean square [RMS] of ACC, and mean sway velocity [MV]) along the medio-lateral (ML), cranio-caudal (CC), and antero-posterior (AP) axes. A total of 31 VH participants (mean age, 33.48 [SD 7.68] years; 19 [61%] female) and 31 HCs (mean age, 30.65 [SD 5.89] years; 18 [58%] female) were recruited. During the eyes-closed portion of the Romberg test, VH participants demonstrated significantly higher maximum ACC and increased RMS of ACC in head movement, as well as higher maximum ACC in pelvic movement along the ML axis. In the same test condition, individuals with BVH exhibited notably higher maximum ACC and RMS of ACC along the ML axis in head and pelvic movements compared with HCs. Additionally, BVH participants exhibited markedly increased maximum ACC along the ML axis in head movement during the eyes-open portion of the tandem Romberg test. Conversely, no significant differences were found between UVH participants and HCs in the assessed parameters. The instrumented Romberg and tandem Romberg tests characterized the kinematic differences in head, pelvis, and ankle movement between VH and healthy adults. The findings suggest that these kinematic body metrics can be useful for screening BVH and can provide goals for vestibular rehabilitation.

An Analysis of Fluid Intake Assessment Approaches for Fluid Intake Monitoring System.

Monitoring fluid intake is essential to help people manage their individual fluid intake behaviors and achieve adequate hydration. Previous studies of fluid intake assessment approaches based on inertial sensors can be categorized into wrist-worn-based and smart-container-based approaches. This study aims to analyze wrist-worn-based and smart-container-based fluid intake assessment approaches using inertial sensors. The comparison of these two approaches should be analyzed according to gesture recognition and volume estimation. In addition, the influence of the fill level and sip size information on the performance is explored in this study. The accuracy of gesture recognition with postprocessing is 92.89% and 91.8% for the wrist-worn-based approach and smart-container-based approach, respectively. For volume estimation, sip-size-dependent models can achieve better performance than general SVR models for both wrist-worn-based and smart-container-based approaches. The improvement of MAPE, MAD, and RMSE can reach over 50% except MAPE for small sip sizes. The results demonstrate that the sip size information and recognition performance are important for fluid intake assessment approaches.

Multi-Task Learning U-Net for Functional Shoulder Sub-Task Segmentation.

The assessment of a frozen shoulder (FS) is critical for evaluating outcomes and medical treatment. Analysis of functional shoulder sub-tasks provides more crucial information, but current manual labeling methods are time-consuming and prone to errors. To address this challenge, we propose a deep multi-task learning (MTL) U-Net to provide an automatic and reliable functional shoulder sub-task segmentation (STS) tool for clinical evaluation in FS. The proposed approach contains the main task of STS and the auxiliary task of transition point detection (TPD). For the main STS task, a U-Net architecture including an encoder-decoder with skip connection is presented to perform shoulder sub-task classification for each time point. The auxiliary TPD task uses lightweight convolutional neural networks architecture to detect the boundary between shoulder sub-tasks. A shared structure is implemented between two tasks and their objective functions of them are optimized jointly. The fine-grained transition-related information from the auxiliary TPD task is expected to help the main STS task better detect boundaries between functional shoulder sub-tasks. We conduct the experiments using wearable inertial measurement units to record 815 shoulder task sequences collected from 20 healthy subjects and 43 patients with FS. The experimental results present that the deep MTL U-Net can achieve superior performance compared to using single-task models. It shows the effectiveness of the proposed method for functional shoulder STS. The code has been made publicly available at https://github.com/RobinChu9890/MTL-U-Net-for-Functional-Shoulder-STS.Clinical Relevance- This work provides an automatic and reliable functional shoulder sub-task segmentation tool for clinical evaluation in frozen shoulder.

Domain-Adaptive Fall Detection Using Deep Adversarial Training.

Fall detection (FD) systems are important assistive technologies for healthcare that can detect emergency fall events and alert caregivers. However, it is not easy to obtain large-scale annotated fall events with various specifications of sensors or sensor positions during the implementation of accurate FD systems. Moreover, the knowledge obtained through machine learning has been restricted to tasks in the same domain. The mismatch between different domains might hinder the performance of FD systems. Cross-domain knowledge transfer is very beneficial for machine-learning based FD systems to train a reliable FD model with well-labeled data in new environments. In this study, we propose domain-adaptive fall detection (DAFD) using deep adversarial training (DAT) to tackle cross-domain problems, such as cross-position and cross-configuration. The proposed DAFD can transfer knowledge from the source domain to the target domain by minimizing the domain discrepancy to avoid mismatch problems. The experimental results show that the average F1-score improvement when using DAFD ranges from 1.5% to 7% in the cross-position scenario, and from 3.5% to 12% in the cross-configuration scenario, compared to using the conventional FD model without domain adaptation training. The results demonstrate that the proposed DAFD successfully helps to deal with cross-domain problems and to achieve better detection performance.

An analysis of patient variables that influence intravenous patient-controlled analgesic use of morphine with quantile regression.

BACKGROUND: Previous studies using linear regression analysis have shown that age, weight, gender, and the site of operation affect intravenous patient-controlled analgesia (IVPCA) narcotic use. However, there are inconsistent observations in the literature. The authors postulate that patient variables could have different effects at various doses of narcotics. To test this hypothesis, the authors analyzed the effect of patient variables on increasing doses of IVPCA narcotic with quantile regression. METHODS: The authors collected retrospective data from 1,782 patients who received IVPCA for a minimum of 3 days after surgery. The authors used stepwise linear regression model to identify variables that significantly affected the total IVPCA requirements. Quantile regression model was further applied to assess the effects of selected variables on the ascending percentile of IVPCA narcotic use. RESULTS: Gender, age, body weight, cancer, and surgical site were identified as significant predictors for IVPCA demand. Body weight had the most and cancer had the least significant effects on total IVPCA demands. The results of quantile regression model revealed that the determinants under consideration varied with different percentiles of IVPCA demand. The patient variables correlated with IVPCA narcotic use differently when the dose exceeded the seventieth to eightieth percentiles compared with other percentiles of narcotic use. CONCLUSIONS: The authors' findings highlight the heterogeneous postoperative pain requirements among patients and the consequent complex process of efficiently managing postoperative pain.

Time-dependent analysis of dosage delivery information for patient-controlled analgesia services.

Pain relief always plays the essential part of perioperative care and an important role of medical quality improvement. Patient-controlled analgesia (PCA) is a method that allows a patient to self-administer small boluses of analgesic to relieve the subjective pain. PCA logs from the infusion pump consisted of a lot of text messages which record all events during the therapies. The dosage information can be extracted from PCA logs to provide easily understanding features. The analysis of dosage information with time has great help to figure out the variance of a patient's pain relief condition. To explore the trend of pain relief requirement, we developed a PCA dosage information generator (PCA DIG) to extract meaningful messages from PCA logs during the first 48 hours of therapies. PCA dosage information including consumption, delivery, infusion rate, and the ratio between demand and delivery is presented with corresponding values in 4 successive time frames. Time-dependent statistical analysis demonstrated the trends of analgesia requirements decreased gradually along with time. These findings are compatible with clinical observations and further provide valuable information about the strategy to customize postoperative pain management.

Exercise Performance Measurement with Smartphone Embedded Sensor for Well-Being Management.

Regular physical activity reduces the risk of many diseases and improves physical and mental health. However, physical inactivity is widespread globally. Improving physical activity levels is a global concern in well-being management. Exercise performance measurement systems have the potential to improve physical activity by providing feedback and motivation to users. We propose an exercise performance measurement system for well-being management that is based on the accumulated activity effective index (AAEI) and incorporates a smartphone-embedded sensor. The proposed system generates a numeric index that is based on users' exercise performance: their level of physical activity and number of days spent exercising. The AAEI presents a clear number that can serve as a useful feedback and goal-setting tool. We implemented the exercise performance measurement system by using a smartphone and conducted experiments to assess the feasibility of the system and investigated the user experience. We recruited 17 participants for validating the feasibility of the measurement system and a total of 35 participants for investigating the user experience. The exercise performance measurement system showed an overall precision of 88% in activity level estimation. Users provided positive feedback about their experience with the exercise performance measurement system. The proposed system is feasible and has a positive effective on well-being management.

An accumulated activity effective index for promoting physical activity: a design and development study in a mobile and pervasive health context.

BACKGROUND: Increased physical activity has become a principal personal health goal worldwide because sufficient physical activity can reduce the risk of many adverse conditions. Motivating individuals to increase their levels of physical activity can increase life expectancy and contribute to a healthy life. Sharing and comparison of physical activity information by using the Internet, with fewer privacy concerns, might also help encourage people to promote and maintain sufficient physical activity. To promote and manage physical activity, an accumulated activity effective index (AAEI) is proposed in this paper. OBJECTIVE: The purpose of the AAEI design is to maintain and promote physical activity. The public can easily accept a clear indicator that reveals the current status of physical activity. The AAEI is not only an assessment and tracking tool for personal physical activity, but is also useful for goal setting and for sharing content with the Internet community. METHODS: The AAEI is derived from input in the form of accumulated physical activity, and evaluates the status of physical activities and days spent exercising. The term AAEI(t1,t2) is an index of the accumulated physical activity in the time interval (t1,t2), where the base unit of time is the day. The AAEI is determined according to accumulated physical activity and is adjusted using the previous status of physical activity. The previous status of physical activity is estimated according to the number of days spent exercising and the accumulated physical activity that has been performed. An analysis of the AAEI performance was conducted using a simulation model and a real-world trial with 2 participants. RESULTS: The AAEI increased as the physical activity and days spent exercising accumulated. Conversely, the AAEI decreased with lack of physical activity and increased resting days. In simulation, the shape of the AAEI line indicated different types of exercise. The moving average AAEI represented long-term exercise. In the real-world trial, the AAEI confirmed that the simulation results were comparable to actual conditions. CONCLUSIONS: The AAEI proposed in this paper is a method that can be used to evaluate the status of a person's physical activity. The AAEI is a simple numeric indication that is estimated by analyzing accumulated physical activity and the average number of days spent exercising. The AAEI is suitable for tracking personal physical activity, reminding the user of achievement goals, and allows data sharing by using the Internet. The results have demonstrated that the AAEI is a useful tool for physical activity management.