RESUMEN
In order to investigate the impact of "Blue Sky War" implemented during 2018-2020 on carbonaceous aerosols in Beijing-Tianjin-Hebei (BTH) region, China, fine particulate matter (PM2.5) samples were collected simultaneously in Tianjin and Handan in three consecutive winters from 2018 to 2020. Organic carbon (OC) and elemental carbon (EC) in PM2.5 were measured with the same thermal-optical methods and analysis protocols. Significant reductions in primary organic carbon (POC) and EC concentrations were observed both in Tianjin and Handan, with decreasing rates of 0.65 and 2.95 µg m-3 yr-1 for POC and 0.13 and 0.64 µg m-3 yr-1 for EC, respectively. The measured absorption coefficients of EC (babs, EC) also decreased year by year, with a decreasing rate of 1.82 and 6.16 Mm-1 yr-1 in Tianjin and Handan, respectively. The estimated secondary organic carbon (SOC) concentrations decreased first and then increased in both Tianjin and Handan, accounting for more than half of the total OC in winter of 2020-2021 and with increasing contributions especially in highly polluted days. SOC was recognized as one of key factors influencing EC light absorption. EC in the two cities was relatively more related to coal combustion and industrial sources. The reductions of primary carbonaceous components may be attributed to the air quality regulations targeting coal combustion and industrial sources emissions in BTH area. Potential source contribution function (PSCF) analysis results indicated that the major source areas of OC and EC in Tianjin were the southwest region of the sampling site, while the southeast areas for Handan. These findings demonstrated the effectiveness of air quality regulation in primary emissions in typical polluted cities in BTH region and highlighted the needs for further control and in-depth investigation of SOC formation along with implementation of air pollution control act in the future.
Asunto(s)
Contaminantes Atmosféricos , Ciudades , Contaminantes Atmosféricos/análisis , Beijing , Monitoreo del Ambiente , Aerosoles/análisis , Material Particulado/análisis , Carbón Mineral/análisis , Carbono/análisis , Estaciones del Año , ChinaRESUMEN
Understanding the bulk and interfacial behaviors during the operation of batteries (e.g., Li-ion, Na-ion, Li-O2 batteries, etc.) is of great significance for the continuing improvement of the performance. Electrochemical quartz crystal microbalance (EQCM) is a powerful tool to this end, as it enables in situ investigation into various phenomena, including ion insertion/deinsertion within electrodes, solid nucleation from the electrolyte, interphasial formation/evolution and solid-liquid coordination. As such, EQCM analysis helps to decipher the underlying mechanisms both in the bulk and at the interface. This tutorial review will present the recent progress in mechanistic studies of batteries achieved by the EQCM technology. The fundamentals and unique capability of EQCM are first discussed and compared with other techniques, and then the combination of EQCM with other in situ techniques is also covered. In addition, the recent studies utilizing EQCM technologies in revealing phenomena and mechanisms of various batteries are reviewed. Perspectives regarding the future application of EQCM in battery studies are given at the end.
RESUMEN
Aqueous Zn-MnO2 batteries using mild electrolyte show great potential in large-scale energy storage (LSES) application, due to high safety and low cost. However, structure collapse of manganese oxides upon cycling caused by the conversion mechanism (e.g., from tunnel to layer structures for α-, ß-, and γ-phases) is one of the most urgent issues plaguing its practical applications. Herein, to avoid the phase conversion issue and enhance battery performance, a structurally robust novel phase of manganese oxide MnO2 H0.16 (H2 O)0.27 (MON) nanosheet with thickness of ≈2.5 nm is designed and synthesized as a promising cathode material, in which a nanosheet structure combined with a novel H+ /Zn2+ synergistic intercalation mechanism is demonstrated and evidenced. Accordingly, a high-performance Zn/MON cell is achieved, showing a high energy density of ≈228.5 Wh kg-1 , impressive cyclability with capacity retention of 96% at 0.5 C after 300 cycles, as well as exhibiting rate performance of 115.1 mAh g-1 at current rate of 10 C. To the best current knowledge, this H+ /Zn2+ synergistic intercalation mechanism is first reported in an aqueous battery system, which opens a new opportunity for development of high-performance aqueous Zn ion batteries for LSES.
RESUMEN
Oxygen evolution reaction (OER), as the critical step in splitting water, is a thermodynamically "up-hill" process and requires highly efficient catalysts to run. Arrhenius' law suggests that the higher temperature, the faster the reaction rate, so that a larger OER current density can be achieved at a lower η. Herein, we report an abnormal temperature effect on the performance of Co-based catalysts, e.g., Co3O4, Li2CoSiO4, and Fe-doped Co(OH) x, in OER in alkaline electrolytes. The OER performance reached a maximum when the temperature increased to 65 °C, and the OER performance declined when the temperature became higher. The mechanism was investigated by using Co3O4 as a model sample, and we propose that at an optimal temperature (around 55-65 °C) the main rate-determining step changes from OH- adsorption dominant to a mixed mode and both the adsorption and the cleavage of the OH group can be rate-determining, which leads to the fastest kinetics.
RESUMEN
Nitrate (NO3-) has been identified as a key component of particulate matter (PM2.5) in China. However, there is still a lack of understanding regarding its sources and how it forms, especially in the context of high-frequency and long-term data. In this study, NO3- levels were observed on an hourly basis over an almost three-year period at an urban site in the Pearl River Delta (PRD) region, China, from January 2019 to December 2021. The results reveal an average daily NO3- concentration ranging from 0.08 µg m-3 to 61.69 µg m-3, constituting 11.9 ± 12.5 % of PM2.5. This percentage rose to as high as 57 % during pollution episodes, highlighting NO3-'s significant role in pollution formation. The ammonia-rich environment was found to be the most important factor in promoting NO3- formation. Positive Matrix Factorization (PMF) analysis indicates that the primary sources of NO3- in the PRD region were vehicle emissions (43.8 ± 21.2 %) and coal combustion (39.1 ± 21.5 %), with shipping emissions, sea salt, soil dust and industrial emissions + biomass burning following in importance. Regarding source areas, the primary contributor of vehicle emissions was predominantly from the PRD region, whereas the coal combustion, aside from local contributions, also originates from the northern region. From a long-term perspective, NO3- pollution has remained relatively stable since the summer of 2020. Concurrently, coal combustion source has shown a localization trend. These insights derived from the extensive, high-frequency observation presented in this study serve as a valuable reference for devising strategies to control NO3- and PM2.5 in the PRD region and China.
RESUMEN
The transfer of particulate organic carbon (POC) to dissolved organic carbon (DOC; OC transferP-D) is crucial for the marine carbon cycle. Sediment resuspension driven by hydrodynamic forcing can affect the burial of sedimentary POC and benthic biological processes in marginal sea. However, the role of sediment grain size fraction on OC transferP-D and the subsequent impact on OC cycling remain unknown. Here, we conduct sediment resuspension simulations by resuspending grain-size fractionated sediments (< 20, 20-63, and > 63 µm) into filtered seawater, combined with analyses of OC content, optical characteristics, 13C and 14C isotope compositions, and molecular dynamics simulations to investigate OC transferP-D and its regulations on OC bioavailability under sediment resuspension. Our results show that the relative intensities of terrestrial humic-like OC (refractory DOC) increase in resuspension experiments of < 20, 20-63, and > 63 µm sediments by 0.14, 0.01, and 0.03, respectively, likely suggesting that sediment resuspension drives refractory DOC transfer into seawater. The variations in the relative intensities of microbial protein-like DOC are linked to the change of terrestrial humic-like OC, accompanied by higher DOC content and reactivity in seawater, particularly in finer sediments resuspension experiments. This implies that transferred DOC likely fuels microbial growth, contributing to the subsequent enhancement of DOC bioavailability in seawater. Our results also show that the POC contents increase by 0.35 %, 0.66 %, and 0.93 % in < 20, 20-63, and > 63 µm resuspension experiments at the end of incubation, respectively. This suggests that the re-absorption of OC on particles may be a significant process, but previously unrecognized during sediment resuspension. Overall, our findings suggest that sediment resuspension promotes the OC transferP-D, and the magnitudes of OC transferP-D further influence the DOC and POC properties by inducing microbial production and respiration. These processes significantly affect the dynamics and recycling of biological carbon pump in shallow marginal seas.
Asunto(s)
Ciclo del Carbono , Carbono , Sedimentos Geológicos , Agua de Mar , Sedimentos Geológicos/química , Agua de Mar/química , Océanos y MaresRESUMEN
Firework (FW) events occur during various festivals worldwide and substantially negatively influence both air quality and human health. However, the effects of FWs on the chemical properties and formation of organic aerosols are far from clear. In this study, fine particulate matter (PM2.5) samples were collected in a suburban area in Qingdao, China during the Chinese Spring Festival. The concentrations of chemical species (especially carbonaceous components) in PM2.5 were measured using a combination of several state-of-the-art techniques. Our results showed that mass concentrations of water-soluble sulfate, potassium and chloride ions, and organic carbon drastically increased and became the predominant components in PM2.5 during FW events. Correspondingly, both the number and fractional contributions of sulfur (S)-containing subgroups (e.g., CHOS and CHONS compounds) and some chlorine (Cl)-containing organic (e.g., CHOSCl and CHONSCl) compounds identified using ultrahigh-resolution Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) increased. The S- and Cl-containing compounds unique to the FW display period were identified, and their chemical characterization, sources, and formation mechanisms were elucidated by combining FT-ICR MS and quantum chemical calculations. Our results suggest that FW emissions play notable roles in both primary and secondary organic aerosol formation, especially for CHOS- and Cl-containing organic compounds.
RESUMEN
As one of the most promising alternatives to graphite negative electrodes, silicon oxide (SiOx) has been hindered by its fast capacity fading. Solid electrolyte interphase (SEI) aging on silicon SiOx has been recognized as the most critical yet least understood facet. Herein, leveraging 3D focused ion beam-scanning electron microscopy (FIB-SEM) tomographic imaging, we reveal an exceptionally characteristic SEI microstructure with an incompact inner region and a dense outer region, which overturns the prevailing belief that SEIs are homogeneous structure and reveals the SEI evolution process. Through combining nanoprobe and electron energy loss spectroscopy (EELS), it is also discovered that the electronic conductivity of thick SEI relies on the percolation network within composed of conductive agents (e.g., carbon black particles), which are embedded into the SEI upon its growth. Therefore, the free growth of SEI will gradually attenuate this electron percolation network, thereby causing capacity decay of SiOx. Based on these findings, a proof-of-concept strategy is adopted to mechanically restrict the SEI growth via applying a confining layer on top of the electrode. Through shedding light on the fundamental understanding of SEI aging for SiOx anodes, this work could potentially inspire viable improving strategies in the future.
RESUMEN
To evaluate the optical properties and molecular composition of water-soluble organic carbon (WSOC) in the atmosphere of coastal cities, particle samples were collected in Tianjin, Qingdao and Shanghai, three coastal cities in eastern China. Subsequent analysis by ultraviolet visible and fluorescence spectrometer and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry were performed. The results showed that the concentration levels and light absorption ability of WSOC decreased from the north to south cities, ranking as Tianjin > Qingdao > Shanghai. Three major fluorescent components including lessoxygenated humic-like substances (52-60 %), highlyoxygenated humic-like substances (15-31 %) and protein-like substances (17-31 %) were identified in WSOC based on the fluorescence spectroscopy and parallel factor analysis, which might be closely related to anthropogenic emissions and continental sources as well as secondary formation processes. Five subgroups of molecular components were further identified in WSOC, including the predominant CHON compounds (35-43 %), sulfur-containing compounds (i.e., CHONS and CHOS compounds, 24-43 %), CHO compounds (20-26 %) and halogen-containing compounds (1-7 %). Compared to marine air masses influenced samples, WSOC affected by continental air masses exhibited higher light absorption coefficients and generally had a higher degree of aromaticity and unsaturation, as well as contained more molecular formulas of WSOC, especially enriched with sulfur-containing compounds. In contrast, relatively more abundant halogen-containing compounds were identified in the marine air masses influenced samples. Overall, this study provided new insights into the light-absorbing and chemical properties of WSOC in coastal cities, especially under the influences of continental and marine air masses.
Asunto(s)
Contaminantes Atmosféricos , Carbono , Carbono/análisis , China , Material Particulado/análisis , Contaminantes Atmosféricos/análisis , Ciudades , Agua/química , Sustancias Húmicas/análisis , Aerosoles/análisis , Compuestos de Azufre , Halógenos/análisis , Azufre/análisis , Monitoreo del Ambiente/métodosRESUMEN
Amorphous solid dispersions stabilized by one or more polymer(s) have been widely used for delivering amorphous drugs with poor water solubilities, and they have gained great market success. Polymer selection is important for preparing robust amorphous solid dispersions, and considerations should be given as to how the critical attributes of a polymer can enhance the physical stability, and the in vitro and in vivo performances of a drug. This article provides a comprehensive overview for recent developments in the understanding the role of polymers in amorphous solid dispersions from the aspects of nucleation, crystal growth, overall crystallization, miscibility, phase separation, dissolution, and supersaturation. The critical properties of polymers affecting the physical stability and the in vitro performance of amorphous solid dispersions are also highlighted. Moreover, a perspective regarding the current research gaps and novel research directions for better understanding the role of the polymer is provided. This review will provide guidance for the rational design of polymer-based amorphous pharmaceutical solids with desired physicochemical properties from the perspective of physical stability and in vitro performance.
RESUMEN
Drug polymorphism, an established term used to describe the phenomenon that a drug can exist in different crystalline phases, has attracted great interests in pharmaceutical field in consideration of its important role in affecting the pharmaceutical performance of oral formulations. This paper presents an overview of recent advances in the research on polymorphic drug systems including understandings on nucleation, crystal growth, dissolution, mechanical properties, polymorphic transformation, etc. Moreover, new strategies and mechanisms in the control of polymorphic forms are also highlighted in this review. Furthermore, challenges and trends in the development of polymorphic drugs are briefly discussed, aiming at developing effective and efficient pharmaceutical formulations containing the polymorphic drugs.
Asunto(s)
Preparaciones Farmacéuticas , CristalizaciónRESUMEN
Superconcentrated "water-in-salt" electrolytes have greatly widened the electrochemical stable window (ESW) of aqueous electrolytes, but they also generate new problems, including high costs, high viscosity, and low conductivity. Here we report a 2 m low concentration electrolyte using an N,N-dimethylformamide/water (DMF/H2O) hybrid solvent, which provides a wider ESW (2.89 V) than an aqueous electrolyte (2.66 V) and presents nonflammability, high conductivity, and low viscosity characteristics. In 2 m DMF/H2O hybrid electrolyte, the LUMO energy of the DMF solvent (-0.00931 a.u.) is lower than that of H2O (-0.00735 a.u.), which could effectively promote the degradation of FSI- and lead to stable solid electrolyte interphase formation. As a result, the electrochemical reversibility and cyclability of the KTi2(PO4)3@C (KTP@C) anode in the aqueous electrolyte have been significantly enhanced with the help of DMF addition. Moreover, the K2Zn3(Fe(CN)6)2 (KZnHCF)//KTP@C full potassium-ion battery exhibits highly efficient stability and rate capability with a long cycle performance over 10â¯000 cycles and delivers a specific discharge capacity of 33 mAh g-1 at a high current density of 20 A g-1. Low concentrations of DMF/H2O hybrid electrolytes can inhibit the hydrogen evolution reaction of aqueous electrolytes, providing more opportunities for the practical application of electrode materials. Not limited to DMF solvent, mixing organic and aqueous solvents will provide more available options and perspectives for improving the energy density and long cycle performance of the aqueous metal-ion battery.
RESUMEN
Nitrated aromatic compounds, the ubiquitous nitrogen-containing organic pollutants, impact the environment and organisms adversely. As industrial raw materials and intermediates, nitrated aromatic compounds and their aromatic precursors are widely employed in the industrial production activities. Nevertheless, their emission from industrial waste gases has so far not been studied extensively. In this study, the concentrations of 12 nitrated aromatic compounds in the particle and gas phases downwind of 16 factories encompassing eight industries (i.e., pharmaceutical, weaving and dyeing, herbicide, explosive, painting, phenolic resin, paper pulp and polystyrene foam industries), were determined by ultra-high-performance liquid chromatography-mass spectrometry. Their concentrations in the particle and gas phases from different factories ranged from 114.7 ± 63.5 to 296.6 ± 62.5 ng m-3 and 148.7 ± 7.4 to 309.8 ± 26.2 ng m-3, respectively, thus, exhibiting significantly high concentrations as compared to the background sites. Among the 12 detected species, 4-nitrophenol, 5-nitrosalicylic acid, 3-nitrosalicylic acid and 4-methyl-2,6-dinitrophenol were observed to be the predominant species, with total fractions up to 47.9-72.3% and 63.1-70.3% in the particle and gas phases, respectively. Their emission profiles with respect to the industrial activities exhibited large discrepancies as compared to the combustion sources, thus, indicating different formation mechanisms. The emission ratios of particulate nitrated aromatic compounds owing to the industrial activities were estimated between 0.5 ± 0.2 and 4.3 ± 1.5 ng µg-1, which were higher than or comparable to those from various combustion sources. The findings from this study confirm the industrial emission to be an important source of nitrated aromatic compounds in the atmosphere. The substantial emissions of nitrated aromatic compounds from various industries reported in this study provide the fundamental basis for further emission estimation and pollution control.
Asunto(s)
Contaminantes Atmosféricos , Hidrocarburos Policíclicos Aromáticos , Aerosoles , Contaminantes Atmosféricos/análisis , Carbón Mineral/análisis , Monitoreo del Ambiente , Gases , Nitrocompuestos , Material Particulado/análisis , Hidrocarburos Policíclicos Aromáticos/análisisRESUMEN
Solar-driven N2 fixation using a photocatalyst in water presents a promising alternative to the traditional Haber-Bosch process in terms of both energy efficiency and environmental concern. At present, the product of solar N2 fixation is either NH4 + or NO3 -. Few reports described the simultaneous formation of ammonia (NH4 +) and nitrate (NO3 -) by a photocatalytic reaction and the related mechanism. In this work, we report a strategy to photocatalytically fix nitrogen through simultaneous reduction and oxidation to produce NH4 + and NO3 - by W18O49 nanowires in pure water. The underlying mechanism of wavelength-dependent N2 fixation in the presence of surface defects is proposed, with an emphasis on oxygen vacancies that not only facilitate the activation and dissociation of N2 but also improve light absorption and the separation of the photoexcited carriers. Both NH4 + and NO3 - can be produced in pure water under a simulated solar light and even till the wavelength reaching 730 nm. The maximum quantum efficiency reaches 9% at 365 nm. Theoretical calculation reveals that disproportionation reaction of the N2 molecule is more energetically favorable than either reduction or oxidation alone. It is worth noting that the molar fraction of NH4 + in the total product (NH4 + plus NO3 -) shows an inverted volcano shape from 365 nm to 730 nm. The increased fraction of NO3 - from 365 nm to around 427 nm results from the competition between the oxygen evolution reaction (OER) at W sites without oxygen vacancies and the N2 oxidation reaction (NOR) at oxygen vacancy sites, which is driven by the intrinsically delocalized photoexcited holes. From 427 nm to 730 nm, NOR is energetically restricted due to its higher equilibrium potential than that of OER, accompanied by the localized photoexcited holes on oxygen vacancies. Full disproportionation of N2 is achieved within a range of wavelength from ~427 nm to ~515 nm. This work presents a rational strategy to efficiently utilize the photoexcited carriers and optimize the photocatalyst for practical nitrogen fixation.
RESUMEN
Solid-state batteries (SSBs) are promising for safer energy storage, but their active loading and energy density have been limited by large interfacial impedance caused by the poor Li+ transport kinetics between the solid-state electrolyte and the electrode materials. To address the interfacial issue and achieve higher energy density, herein, a novel solid-like electrolyte (SLE) based on ionic-liquid-impregnated metal-organic framework nanocrystals (Li-IL@MOF) is reported, which demonstrates excellent electrochemical properties, including a high room-temperature ionic conductivity of 3.0 × 10-4 S cm-1 , an improved Li+ transference number of 0.36, and good compatibilities against both Li metal and active electrodes with low interfacial resistances. The Li-IL@MOF SLE is further integrated into a rechargeable Li|LiFePO4 SSB with an unprecedented active loading of 25 mg cm-2 , and the battery exhibits remarkable performance over a wide temperature range from -20 up to 150 °C. Besides the intrinsically high ionic conductivity of Li-IL@MOF, the unique interfacial contact between the SLE and the active electrodes owing to an interfacial wettability effect of the nanoconfined Li-IL guests, which creates an effective 3D Li+ conductive network throughout the whole battery, is considered to be the key factor for the excellent performance of the SSB.
RESUMEN
LiFePO4 @C/reduced graphene oxide (rGO) hierarchical microspheres with superior electrochemical activity and a high tap density were first synthesized by using a Fe3+ -based single inorganic precursor (LiFePO4 OH@RF/GO; RF=resorcinol-formaldehyde, GO=graphene oxide) obtained from a template-free self-assembly synthesis followed by direct calcination. The synthetic process requires no physical mixing step. The phase transformation pathway from tavorite LiFePO4 OH to olivine LiFePO4 upon calcination was determined by means of the inâ situ high-temperature XRD technique. Benefitting from the unique structure of the material, these microspheres can be densely packed together, giving a high tap density of 1.3â g cm-3 , and simultaneously, defectless LiFePO4 primary nanocrystals modified with a highly conductive surface carbon layer and ultrathin rGO provide good electronic and ionic kinetics for fast electron/Li+ ion transport.
RESUMEN
A novel hybrid single Li-ion conductor (SLIC) for a Li-ion solid electrolyte was prepared by mixing aluminate complexes-polyethylene glycol (LiAl-PEG) and polyethylene oxide (PEO) for solid-state Li-ion batteries. The LiAl-PEG/PEO blend possesses high thermal stability and electrochemical stability with an oxidation decomposition voltage up to 4.8 V. Notably, this hybrid SLIC exhibits not only excellent Li-ion migration kinetics, but also good ionic conductivity as high as 4.0 × 10-5 and 2.6 × 10-4 S cm-1 at 30 and 100 °C, respectively, which is much higher than previously reported SLICs. Importantly, by the combination of molecular dynamics simulations and experiment measurements, the mechanisms of Li-ion migration across the SLIC (LiAl-PEG), the salt-in-polymer (LiClO4/PEO) and the optimized SLIC (LiAl-PEG/PEO) were systematically investigated for the first time. The new hopping transport mechanism was verified for the SLIC system at the nanoscale. As for the hybrid SLIC, PEO chains enhance the segmental mobility of the ether-chains bonded with Al atoms, improve the ionicity, and provide extra ionic paths for Li transfer, resulting in the optimized Li-ion migration kinetics of LiAl-PEG/PEO.
RESUMEN
Co3O4-δ quantum dots (Co3O4-δ-QDs) with a crystallite size of approximately 2 nm and oxygen vacancies were fabricated through multicycle lithiation/delithiation of mesoporous Co3O4 nanosheets. Used as an oxygen evolution reaction (OER) electrocatalyst for water splitting, the catalytic performance (an overpotential of 270 mV@10 mA cm-2 and no decay within 30 h) of Co3O4-δ-QDs is superior to that of previously reported Co-based catalysts and the state-of-the-art IrO2. Compared to that of the Co3O4 nanosheets, the enhanced OER activity of Co3O4-δ-QDs is attributed to two factors: one is the increased quantity of the Faradaic active sites, including the total active sites (q*Total), the most accessible active sites (q*Outer), and their ratio (q*Outer/q*Total); the other is the enhanced intrinsic electroactivity per active site evaluated by the turnover frequency and the current density normalized by the most accessible active sites (j/q*Outer) related to the OER. This multicycle lithiation/delithiation method can be applied to other transition metal oxides as well, offering a general approach to develop high-performance electrocatalysts for water splitting.
RESUMEN
Ellipsoid nitrogen-doped hollow carbon shells with different nitrogen contents and electrical conductivities were prepared using a simple calcination method by regulating the calcination temperature. Although a high nitrogen content promotes pseudocapacitance, it reduces the electrical conductivity of carbon, causing loss of capacitance. The best rate performance was achieved by a mixture of two types of ellipsoid nitrogen-doped hollow carbon shells, in which one contains a higher level of nitrogen with lower conductivity and higher pseudocapacitance, while the other contains a relatively lower level of nitrogen with higher conductivity. The enhanced performance can be explained by the synergistic effect of one component providing high pseudocapacitance and the other component serving as a highly electrically conductive network, which leads to activation of "nitrogen" to enhance pseudocapacitance performance. The mixed material showed a specific capacitance of 156.9 F g-1 at a high current density of 10 A g-1, with no degradation after 10 000 cycles.
RESUMEN
N-doped graphene (NDG) was investigated for oxygen reduction reaction (ORR) and used as air-electrode catalyst for Zn-air batteries. Electrochemical results revealed a slightly lower kinetic activity but a much larger rate capability for the NDG than commercial 20% Pt/C catalyst. The maximum power density for a Zn-air cell with NDG air cathode reached up to 218 mW cm-2, which is nearly 1.5 times that of its counterpart with the Pt/C (155 mW cm-2). The equivalent diffusion coefficient (DE) of oxygen from electrolyte solution to the reactive sites of NDG was evaluated as about 1.5 times the liquid-phase diffusion coefficient (DL) of oxygen within bulk electrolyte solution. Combined with experiments and ab initio calculations, this seems counterintuitive reverse ORR of NDG versus Pt/C can be rationalized by a spontaneous adsorption and fast solid-state diffusion of O2 on ultralarge graphene surface of NDG to enhance effective ORR on N-doped-catalytic-centers and to achieve high-rate performance for Zn-air batteries.