RESUMEN
PURPOSE: To assess the impact of endoscope-assisted fractured roots or fragments extraction within the mandibular canal, along with quantitative sensory testing (QST) alterations in the inferior alveolar nerve (IAN). METHODS: Six patients with lower lip numbness following mandibular third molar extraction were selected. All patients had broken roots or fragments within the mandibular canal that were extracted under real-time endoscopic assistance. Follow-up assessments were conducted on postoperative days 1, 7, and 35, including a standardized QST of the lower lip skin. RESULTS: The average surgical duration was 32.5 min, with the IAN exposed in all cases. Two of the patient exhibited complete recovery of lower lip numbness, three experienced symptom improvement, and one patient remained unaffected 35 days after the surgery. Preoperative QST results showed that the mechanical detection and pain thresholds on the affected side were significantly higher than those on the healthy side, but improved significantly by postoperative day 7 in five patients, and returned to baseline in two patients on day 35. There were no significant differences in the remaining QST parameters. CONCLUSIONS: All endoscopic surgical procedures were successfully completed without any additional postoperative complications. There were no cases of deterioration of IAN injury, and lower lip numbness recovered in the majority of cases. Endoscopy allowed direct visualization and examination of the affected nerve, facilitating a comprehensive analysis of the IAN.
Asunto(s)
Diente Impactado , Traumatismos del Nervio Trigémino , Humanos , Estudios Retrospectivos , Hipoestesia/complicaciones , Hipoestesia/cirugía , Canal Mandibular , Traumatismos del Nervio Trigémino/etiología , Mandíbula/cirugía , Nervio Mandibular , Extracción Dental/efectos adversos , Extracción Dental/métodos , Tercer Molar/cirugía , Diente Impactado/cirugía , Radiografía Panorámica/métodosRESUMEN
OBJECTIVES: This meta-analysis aimed to elucidate the effects of various acid etching patterns on the sensitivity of teeth and their clinical effectiveness following composite resin repair. MATERIALS AND METHODS: PubMed, Cochrane Library, Web of Science, and Embase databases were searched for relevant studies on the postoperative sensitivity (POS) of composite resin restorations after using different bonding systems. The retrieval was from the inception of the databases to August 13, 2022, with no filter of written language. Literature screening was conducted by two independent researchers. The Cochrane risk-of-bias assessment tool was adopted for quality evaluation, and Stata 15.0 for analysis. RESULTS: Twenty-five randomized controlled trials were included in the present study. Following resin composite restoration, 1309 restorations were bonded by self-etching (SE) adhesives, whereas 1271 restorations were bonded by total-etching (TE) adhesives. The meta-analyses showed that there is no evidence to prove the SE and TE will affect POS at present when measured using the modified United States Public Health Service (USPHS) criteria [RR = 1.00 (95% CI: 0.96, 1.04)], the World Dental Federation (FDI) [RR = 1.06 (95% CI: 0.98, 1.15)], or the visual analog scale (VAS) [SMD = 0.02 (95% CI: -0.15, 0.20)] scales. At a certain follow-up time, TE adhesives provide better outcomes in terms of color match, marginal staining, and marginal adaptation. In other words, TE adhesives have better esthetic results. CONCLUSIONS: The type of bonding technique (ER and SE) does not affect the risk and degree of POS in class I/II and class V restorations. Further research is required to verify whether these findings apply to different forms of composite resin restorations. CLINICAL RELEVANCE: Besides the fact that TE barely increase postoperative sensitivity, it also yields superior cosmetic results.
Asunto(s)
Resinas Compuestas , Cementos Dentales , Resinas Compuestas/uso terapéutico , Recubrimientos Dentinarios , Cementos de Resina , Restauración Dental Permanente/métodos , Grabado Ácido Dental/métodos , Estética Dental , Adaptación Marginal DentalRESUMEN
The aim of this study is to assess the relationship between somatosensory functional changes and inferior alveolar nerve (IAN) exposure after impacted mandibular third molars (M3M) removal. We recruited 35 patients who underwent impacted M3M extraction near the IAN. The M3Ms were extracted by combined endoscopy, piezosurgery, and contra-angle high-speed turbine handpiece. All IAN canal perforations and exposed regions were recorded and measured by endoscopy after extraction and on cone-beam computed tomography (CBCT) images before extraction. The patients were followed up 1, 7, and 35 days after surgery. A standardized quantitative sensory testing (QST) battery was performed on the lower lip skin. All of 35 cases had exposed IAN on CBCT images, 5 of which had no exposed IAN under endoscopy. For the other 30 cases, the endoscopy-measured IAN length and width were shorter than the CBCT measurements (P < 0.001). The warm and mechanical detection thresholds (MDT) on the operation side were significantly higher than the contralateral side after surgery (P < 0.05). Thermal sensory limen, MDT, and cold pain threshold were strongly correlated with the exposed IAN length and MDT also with the exposed IAN width one day after surgery. In conclusion, it was found that not all exposed IAN in CBCT images were real exposure after surgery. The intraoperative exposed IAN endoscopic measurements were smaller than by CBCT and strongly correlated with some QST parameters.
Asunto(s)
Diente Impactado , Traumatismos del Nervio Trigémino , Humanos , Tercer Molar/cirugía , Mandíbula , Endoscopía , Extracción Dental/métodos , Diente Impactado/diagnóstico por imagen , Diente Impactado/cirugía , Nervio Mandibular/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/métodos , Radiografía Panorámica/métodosRESUMEN
The present study aimed to predict the envelope surfaces from facial morphology. Condylar envelope surfaces for 34 healthy adults were formed and simplified as sagittal section curves. Cephalometric and maximum mandibular moving distances measurement were performed on the participants. There was no statistically significant difference (p = 0.763) between the left and right maximum lateral movements. There was a statistically significant difference in the mandibular body length between the sexes. The envelope surfaces were divided into type 1 with Hp2 ≥ 1/3 Hp1 and type 2 with Hp2 < 1/3 × Hp1. SNA and SNB for type 2 were significantly greater than those for type 1 (p < 0.001). Therefore, the participants were divided into four groups based on gender and envelope surface morphology. The curves could be fitted using the second-order Fourier function (R-square ≥0.95). Six facial parameters were selected and a matrix was used to map facial morphology to the envelope surface. Individual sagittal curves were predicted using the matrix and facial parameters, and the envelope surface was predicted using the curve and the condyle model. Deviation analysis for the predicted envelope surface using the actual envelope as a reference was carried out (root mean square = 0.9970 mm ± 0.2918 mm). This method may lay a foundation for the geometric design of artificial fossa components of temporomandibular joint replacement systems. It may improve prosthesis design without flexible tissue repair and guide the movement of the artificial joint head.
RESUMEN
Objective: This study presents an innovative articular fossa prosthesis generated by the envelope surface of condyle movement, and compares its mandible movements, muscle activities, and joint reaction forces with two temporomandibular joint (TMJ) prostheses using multibody musculoskeletal simulation. Methods: A healthy 23-year-old female was recruited for this study. Cone-beam computed tomographic (CBCT) was performed to reconstruct the mandibular bone geometry. A customized TMJ fossa prosthesis was designed based on the subject-specific envelope surface of condyle movement (ESCM). Mandibular kinematics and jaw-closing muscle electromyography (EMG) were simultaneously recorded during maximum jaw opening-closing movements. To validate our prosthesis design, a mandibular musculoskeletal model was established using flexible multibody dynamics and the obtained kinematics and EMG data. The Biomet fossa prosthesis and the ellipsoidal fossa prosthesis designed by imitating the lower limb prostheses were used for comparison. Simulations were performed to analyze the effects of different fossa prostheses on jaw opening-closing motions, mandibular muscle activation, and contact forces. Results: The maximum opening displacement for the envelope-based fossa prosthesis was greater than those for Biomet and ellipsoidal prostheses (36 mm, 35 mm, and 33 mm, respectively). The mandibular musculoskeletal model with ellipsoidal prosthesis led to dislocation near maximal jaw opening. Compared to Biomet, the envelope-based fossa reduced the digastric and lateral pterygoid activation at maximal jaw opening. It also reduced the maximal resistance to condylar sliding on the intact side by 63.2 N. Conclusion: A customized TMJ fossa prosthesis was successfully developed using the ESCM concept. Our study of musculoskeletal multibody modeling has highlighted its advantages and potential. The artificial fossa design successfully achieved a wider condylar range of motion. It also reduced the activation of jaw opening muscles on the affected side and resistance on the intact side. This study showed that an ESCM-based approach may be useful for optimizing TMJ fossa prostheses design.
RESUMEN
Quercus franchetii Skan, a crucial indicator plant of dry-hot valley with endemic to southwestern China. In this study, the complete chloroplast genome of Q. franchetii was assembled and characterized. The circular genome was 160,785 bp in length, containing a large single copy (LSC) region of 90,169 bp, a small single copy (SSC) region of 18,828 bp, and a pair of inverted repeat regions of 25,894 bp. Total 131 genes were annotated, comprising 86 protein-coding genes, 37 tRNA genes, and 8 rRNA genes. The phylogenetic analysis indicated that Q. franchetii was closely related to Q. glauca and Q. chungii.
RESUMEN
Massive plant hyperspectral images (HSIs) result in huge storage space and put a heavy burden for the traditional data acquisition and compression technology. For plant leaf HSIs, useful plant information is located in multiple arbitrary-shape regions of interest (MAROIs), while the background usually does not contain useful information, which wastes a lot of storage resources. In this paper, a novel hyperspectral compressive sensing framework for plant leaves with MAROIs (HCSMAROI) is proposed to alleviate these problems. HCSMAROI only compresses and reconstructs MAROIs by discarding the background to achieve good reconstructed performance. But for different plant leaf HSIs, HCSMAROI has the potential to be applied in other HSIs. Firstly, spatial spectral decorrelation criterion (SSDC) is used to obtain the optimal band of plant leaf HSIs; Secondly, different leaf regions and background are distinguished by the mask image of the optimal band; Finally, in order to improve the compression efficiency, after discarding the background region the compressed sensing technology based on blocking and expansion is used to compress and reconstruct the MAROIs of plant leaves one by one. Experimental results of soybean leaves and tea leaves show that HCSMAROI can achieve 3.08 and 5.05 dB higher PSNR than those of blocking compressive sensing (BCS) at the sampling rate of 5%, respectively. The reconstructed spectra of HCSMAROI are especially closer to the original ones than that of BCS. Therefore, HCSMAROI can achieve significantly higher reconstructed performance than that of BCS. Moreover, HCSMAROI can provide a flexible way to compress and reconstruct different MAROIs with different sampling rates, while achieving good reconstruction performance in the spatial and spectral domains.