RESUMEN
BACKGROUND: Macrophage-mediated inflammatory response in the early post-grafting period restricts fat graft retention. Pyroptosis is a novel type of programmed cell death that extensively participates in inflammatory pathologies. OBJECTIVES: This study sought to determine whether macrophage pyroptosis was activated during the inflammatory phase after fat grafting and to investigate the efficacy of a pyroptosis inhibitor, disulfiram (DSF), in fat graft retention. METHODS: We established a C57BL/6 mice fat grafting model and then analyzed macrophage pyroptosis. DSF (50â mg/kg, every other day) was intraperitoneally injected starting 1â hour before fat grafting and continued for 14 days. An in vitro co-culture system was established in which mouse RAW264.7 macrophages were co-cultured with apoptotic adipocytes to further validate the findings of the in vivo studies and to explore the underlying mechanisms. RESULTS: Here we reported that macrophage pyroptosis was activated in both fat grafts and in vitro co-culture models. DSF was found to be a potent pyroptosis inhibitor, promoting M2 macrophage polarization. In addition, DSF was demonstrated to enhance vascularization and graft retention. CONCLUSIONS: Our results suggested that pyroptosis plays a crucial role in the inflammatory cascade within fat grafts. DSF, being a clinically available drug, could be translated into a clinically effective drug for improving fat graft survival by inhibiting macrophage pyroptosis, therefore inducing M2 macrophage polarization and promoting neovascularization.
Asunto(s)
Técnicas de Cocultivo , Disulfiram , Inflamasomas , Macrófagos , Ratones Endogámicos C57BL , Proteína con Dominio Pirina 3 de la Familia NLR , Piroptosis , Animales , Piroptosis/efectos de los fármacos , Disulfiram/farmacología , Ratones , Proteína con Dominio Pirina 3 de la Familia NLR/metabolismo , Proteína con Dominio Pirina 3 de la Familia NLR/antagonistas & inhibidores , Macrófagos/efectos de los fármacos , Macrófagos/metabolismo , Macrófagos/inmunología , Inflamasomas/metabolismo , Inflamasomas/antagonistas & inhibidores , Inflamasomas/efectos de los fármacos , Células RAW 264.7 , Tejido Adiposo/efectos de los fármacos , Supervivencia de Injerto/efectos de los fármacos , Adipocitos/efectos de los fármacos , Adipocitos/metabolismo , MasculinoRESUMEN
In this paper, a series of peptidomimetic SARS-CoV-2 3CL protease inhibitors with new P2 and P4 positions were synthesized and evaluated. Among these compounds, 1a and 2b exhibited obvious 3CLpro inhibitory activities with IC50 of 18.06 nM and 22.42 nM, respectively. 1a and 2b also showed excellent antiviral activities against SARS-CoV-2 in vitro with EC50 of 313.0 nM and 170.2 nM, respectively, the antiviral activities of 1a and 2b were 2- and 4-fold better than that of nirmatrelvir, respectively. In vitro studies revealed that these two compounds had no significant cytotoxicity. Further metabolic stability tests and pharmacokinetic studies showed that the metabolic stability of 1a and 2b in liver microsomes was significantly improved, and 2b had similar pharmacokinetic parameters to that of nirmatrelvir in mice.
Asunto(s)
COVID-19 , Peptidomiméticos , Animales , Ratones , Inhibidores de Proteasas/farmacología , Peptidomiméticos/farmacología , SARS-CoV-2 , Nitrilos , Antivirales/farmacologíaRESUMEN
Tin-based perovskites are promising for realizing lead-free perovskite solar cells; however, there remains a significant challenge to achieving high-performance tin-based perovskite solar cells. In particular, the device fill factor was much lower than that of other photovoltaic cells. Therefore, understanding how the fill factor was influenced by device physical mechanisms is meaningful. In this study, we reported a method to improve the device fill factor using a thin cesium iodide layer modification in tin-based perovskite cells. With the thin passivation layer, a high-quality perovskite film with larger crystals and lower charge carrier densities was obtained. As a result, the series resistance of devices was decreased; the shunt resistance of devices was increased; and the non-radiative recombination of devices was suppressed. Consequently, the fill factor, and the device efficiency and stability were greatly enhanced. The champion tin-based perovskite cells showed a fill factor of 63%, an efficiency of 6.1% and excellent stability. Our study reveals that, with a moderate thin layer modification strategy, the long-term stability of tin-based PSCs can be developed.
RESUMEN
The power conversion efficiency of modern perovskite solar cells has surpassed that of commercial photovoltaic technology, showing great potential for commercial applications. However, the current high-performance perovskite solar cells all contain toxic lead elements, blocking their progress toward industrialization. Lead-free tin-based perovskite solar cells have attracted tremendous research interest, and more than 14% power conversion efficiency has been achieved. In tin-based perovskite, Sn2+ is easily oxidized to Sn4+ in air. During this process, two additional electrons are introduced to form a heavy p-type doping perovskite layer, necessitating the production of hole transport materials different from that of lead-based perovskite devices or organic solar cells. In this review, for the first time, we summarize the hole transport materials used in the development of tin-based perovskite solar cells, describe the impact of different hole transport materials on the performance of tin-based perovskite solar cell devices, and summarize the recent progress of hole transport materials. Lastly, the development direction of lead-free tin-based perovskite devices in terms of hole transport materials is discussed based on their current development status. This comprehensive review contributes to the development of efficient, stable, and environmentally friendly tin-based perovskite devices and provides guidance for the hole transport layer material design.
RESUMEN
BACKGROUND: Botulinum toxin-A (BTX-A) is used in the treatment of nasolabial folds (NLFs). However, lighting and clinician subjectivity play a major role in evaluating the efficacy of this treatment. OBJECTIVES: By applying 3-dimensional (3D) technology, this study aimed to quantitatively evaluate the effects of BTX-A injection on muscular (M) and muscle-fat pad mixed-type (MF) NLFs. METHODS: BTX-A was injected into bilateral marked points on the NLFs, where the levator labii alaeque nasi, zygomaticus minor, and zygomaticus major pull the skin to form the NLF (2 U at each injection site). Pretreatment and posttreatment 3D facial images were captured with static and laughing expressions. The curvature, width, depth, and lateral fat volume of the NLFs were measured to compare the therapeutic efficacy for type M and MF NLFs. RESULTS: Thirty-nine patients with type M and 37 with type MF NLFs completed the follow-up data. In these patients, the curvature, width, and depth of the NLF showed a significant reduction at 1 month and gradually recovered at 3 and 6 months after treatment, with more significant improvement when laughing than when static. Variations compared to the pretreatment values of type MF were greater than those of type M at each time point. The lateral fat volume of the type MF NLF was significantly reduced (P < .05). CONCLUSIONS: 3D technology can quantitatively evaluate the effects BTX-A injection for treating type M and type MF NLFs. BTX-A is more effective on type MF than on type M NLFs.
Asunto(s)
Toxinas Botulínicas Tipo A , Técnicas Cosméticas , Humanos , Tejido Adiposo/diagnóstico por imagen , Tejido Adiposo/efectos de los fármacos , Toxinas Botulínicas Tipo A/administración & dosificación , Músculos Faciales/diagnóstico por imagen , Músculos Faciales/efectos de los fármacos , Surco Nasolabial/diagnóstico por imagen , Resultado del Tratamiento , Imagenología TridimensionalRESUMEN
BACKGROUND: As a derivative of adipose tissues, stromal vascular fraction gel has been widely utilized in facial soft tissue filling, but it still does not achieve the expected effect in forehead filling. The reason may be related to the corrugator muscles movements. OBJECTIVES: The authors aimed to evaluate the effect of botulinum toxin-A (BTX-A) on the retention rate of stromal vascular fraction gel by limiting the corrugator muscles movements and to provide a theoretical basis that short-term inhibition of movement in the affected area could improve the effects of the fat graft. METHODS: From January 2019 to June 2021, patients with stromal vascular fraction gel facial filling (including frontal and temporal parts) were selected. According to whether or not BTX-A treatment was received, patients were divided into injected and the noninjected groups. A questionnaire and the Global Aesthetic Improvement Scale (GAIS) were administered to evaluate 2-dimensional photos. The retention rate and curvature were calculated with 3-dimensional images utilizing Artec Studio 13 Professional and MATLAB software. RESULTS: The graft retention, forehead curvature, and GAIS scores were all higher in the injected group than the noninjected group (P < .01). On the questionnaire, the injected group also showed more satisfaction with the treatment effect and were more willing to recommend the treatment to their friends. CONCLUSIONS: BTX-A injection can improve the retention rate of prefrontal stromal vascular fraction gel filling, with higher patient satisfaction and better postoperative effects.
Asunto(s)
Toxinas Botulínicas Tipo A , Fracción Vascular Estromal , Humanos , Estudios Retrospectivos , Tejido Adiposo/trasplante , Satisfacción del PacienteRESUMEN
The inflammatory response mediated by macrophages plays a role in tissue repair. Macrophages preferentially infiltrate the donor site and subsequently, infiltrate the recipient site after fat grafting. This study aimed to trace host-derived macrophages and to evaluate the effects of macrophage infiltration at the recipient site during the early stage on long-term fat graft retention. In our novel mouse model, all mice underwent simulated liposuction and were divided into 2 groups. The fat procurement plus grafting (Pro-Grafting) group was engrafted with prepared fat (0.3 ml). The pro-Grafting+M2 group was engrafted with prepared fat (0.3 ml) mixed with 1.0 × 106 GFP+M0 macrophages, and then, 2 ng IL-4 was injected into the grafts on Day 3. In addition, 1.0 × 106 GFP+M0 macrophages were injected into the tail vein for tracing in the Pro-Grafting group. As a result, GFP+macrophages first infiltrated the donor site and subsequently infiltrated the recipient site in the Pro-Grafting group. The long-term retention rate was higher in the Pro-Grafting+M2 group (52% ± 6.5%) than in the Pro-Grafting group (40% ± 3.5%). CD34+ and CD31+ areas were observed earlier, and expression of the adipogenic proteins PPAR-γ, C/EBP and AP2 was higher in the Pro-Grafting+M2 group than in the Pro-Grafting group. The host macrophages preferentially infiltrate the donor site, and then, infiltrate the recipient site after fat grafting. At the early stage, an increase in macrophages at the recipient site may promote vascularization and regeneration, and thereby improve the fat graft retention rate.
Asunto(s)
Adipogénesis , Tejido Adiposo , Adipogénesis/fisiología , Tejido Adiposo/metabolismo , Animales , Modelos Animales de Enfermedad , Supervivencia de Injerto/fisiología , Macrófagos/metabolismo , Ratones , Neovascularización Patológica/metabolismo , Neovascularización Fisiológica/fisiologíaRESUMEN
In recent years, lead halide perovskite materials have attracted great interest and are widely used in solar cells and light-emitting devices due to their high photoelectronic quantum yield, high color purity, high defect tolerance, long diffusion length, high carrier mobility, and bandgap tunability. However, the application of lead halide perovskites is limited due to the presence of Pb, making lead-free perovskites an important substitute due to their same crystal structure and similar properties. Although some reports have been made on lead-free perovskite materials, there are still great challenges to realize their application due to their poor stability, easy phase transition, and low photoelectric conversion efficiency. Here, we mainly summarize the development and application of ABX3-type lead-free halide perovskite materials, especially in optoelectronic devices. The article first introduces the lattice and energy band structure, the optoelectronic properties of lead-free perovskites, including the research method of lead-free perovskites, and then analyzes the reasons for the low luminous efficiency and poor stability of lead-free perovskite materials. Second, the development history and current situation of lead-free perovskites in different optoelectronic device applications are summarized. Finally, we present the challenges and prospects for the future development of lead-free perovskites.
RESUMEN
Project-based learning engages students in practical activities related to course content and has been demonstrated to improve academic performance. Due to its reported benefits, this form of active learning was incorporated with an ongoing research project into an introductory, graduate-level Musical Acoustics course at the Peabody Institute of The Johns Hopkins University. Students applied concepts from the course to characterize a contact sensor with a polymer diaphragm for musical instrument recording. Assignments throughout the semester introduced students to completing a literature review, planning an experiment, collecting and analyzing data, and presenting results. While students were given broad goals to understand the performance of the contact sensor compared to traditional microphones, they were allowed independence in determining the specific methods used. The efficacy of the course framework and research project was assessed with student feedback provided through open-ended prompts and Likert-type survey questions. Overall, the students responded positively to the project-based learning and demonstrated mastery of the course learning objectives. The work provides a possible framework for instructors considering using project-based learning through research in their own course designs.
Asunto(s)
Acústica , Aprendizaje Basado en Problemas , Retroalimentación , HumanosRESUMEN
BACKGROUND: Botulinum toxin-A (BTX-A) injection of regional platysma has been utilized in the lower-part elevation and mandibular contour sculpture. However, the relative research, especially in quantitative assessment appears very spare. Our aim is to investigate the efficacy of three-dimensional (3D) technology as a method for regional platysma injection with BTX-A. MATERIALS AND METHODS: From October 2019 to September 2020, patients with mild or moderate degrees of facial sagging on the lower face were recruited to regional platysma BTX-A injection, and 3D scanning and measurement technology was used to evaluate the difference of curved distances and angels. Patients' improvement was assessed by the global aesthetic improvement scale (GAIS). RESULTS: A total of 57 patients underwent regional platysma BTX-A injection and 32 patients were followed up successfully. Compared with Pre-operative, postoperative facial reference curves distance and cervico-mental angles had statistical differences (p < 0.05). GAIS suggested that the 3D imaging measurement technology could improve satisfaction. CONCLUSION: 3D technology can evaluate the improvement of the lower face with BTX-A. It provides effective measurement methods and raises satisfaction. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .
Asunto(s)
Toxinas Botulínicas Tipo A , Sistema Músculo-Aponeurótico Superficial , Humanos , Estudios de Seguimiento , Resultado del Tratamiento , TecnologíaRESUMEN
BACKGROUND: The design lines for midfacial filling shift upward with a patient's position changes from upright to supine during operation. This will cause the actual filled part to deviate from the target area. OBJECTIVES: This authors aimed to evaluate the effect of positional changes on midfacial landmarks and find the optimal body position for midface filling. METHODS: The process involved the grading and evaluation stages. The midfacial laxity of each sample in the evaluation stage was graded into minimal, moderate, and severe by the system established in the grading stage. Measured through the 3-dimensional images in each grade, the vertical distances from landmarks C, D, and E (representing the region of the tear trough, infraorbital area, and nasolabial fat pad, respectively) to the horizontal line of the inner canthus and depth of nasolabial fold at an angle of 90° were separately compared with those from the other angles (60°, 45°, 30°, and 0°) of the operating table. RESULTS: In the minimal midfacial laxity group, all 3 landmarks significantly moved upward when the angle decreased to 30°. However, landmark E of the moderate and severe and landmark D of the severe midfacial laxity groups both significantly moved upward when the angle decreased to 45°. The depth of the nasolabial fold at a 45° angle was significantly less than that at a 90° angle in the moderate and severe groups. CONCLUSIONS: In midface filling, a patient's body position should be optimally selected according to the midfacial laxity and filling area.
Asunto(s)
Tejido Adiposo , Surco Nasolabial , Humanos , Mejilla , Imagenología Tridimensional , PielRESUMEN
BACKGROUND: Plasmodium falciparum erythrocyte binding antigen-175 (PfEBA-175) is a candidate antigen for a blood-stage malaria vaccine, while various polymorphisms and dimorphism have prevented to development of effective vaccines based on this gene. This study aimed to investigate the dimorphism of PfEBA-175 on both the Bioko Island and continent of Equatorial Guinea, as well as the genetic polymorphism and natural selection of global PfEBA-175. METHODS: The allelic dimorphism of PfEBA-175 region II of 297 bloods samples from Equatorial Guinea in 2018 and 2019 were investigated by nested polymerase chain reaction and sequencing. Polymorphic characteristics and the effect of natural selection were analyzed using MEGA 7.0, DnaSP 6.0 and PopART programs. Protein function prediction of new amino acid mutation sites was performed using PolyPhen-2 and Foldx program. RESULTS: Both Bioko Island and Bata district populations, the frequency of the F-fragment was higher than that of the C-fragment of PfEBA-175 gene. The PfEBA-175 of Bioko Island and Bata district isolates showed a high degree of genetic variability and heterogeneity, with π values of 0.00407 & 0.00411 and Hd values of 0.958 & 0.976 for nucleotide diversity, respectively. The values of Tajima's D of PfEBA-175 on Bata district and Bioko Island were 0.56395 and - 0.27018, respectively. Globally, PfEBA-175 isolates from Asia were more diverse than those from Africa and South America, and genetic differentiation quantified by the fixation index between Asian and South American countries populations was significant (FST > 0.15, P < 0.05). A total of 310 global isolates clustered in 92 haplotypes, and only one cluster contained isolates from three continents. The mutations A34T, K109E, D278Y, K301N, L305V and D329N were predicted as probably damaging. CONCLUSIONS: This study demonstrated that the dimorphism of F-fragment PfEBA-175 was remarkably predominant in the study area. The distribution patterns and genetic diversity of PfEBA-175 in Equatorial Guinea isolates were similar another region isolates. And the levels of recombination events suggested that natural selection and intragenic recombination might be the main drivers of genetic diversity in global PfEBA-175. These results have important reference value for the development of blood-stage malaria vaccine based on this antigen.
Asunto(s)
Antígenos de Protozoos/genética , Plasmodium falciparum/genética , Polimorfismo Genético , Proteínas Protozoarias/genética , Selección Genética , Adolescente , Adulto , Anciano , Niño , Preescolar , Guinea Ecuatorial , Humanos , Lactante , Malaria Falciparum/parasitología , Persona de Mediana Edad , Adulto JovenRESUMEN
BACKGROUND: Thrombospondin-related adhesive protein (TRAP) is a transmembrane protein that plays a crucial role during the invasion of Plasmodium falciparum into liver cells. As a potential malaria vaccine candidate, the genetic diversity and natural selection of PfTRAP was assessed and the global PfTRAP polymorphism pattern was described. METHODS: 153 blood spot samples from Bioko malaria patients were collected during 2016-2018 and the target TRAP gene was amplified. Together with the sequences from database, nucleotide diversity and natural selection analysis, and the structural prediction were preformed using bioinformatical tools. RESULTS: A total of 119 Bioko PfTRAP sequences were amplified successfully. On Bioko Island, PfTRAP shows its high degree of genetic diversity and heterogeneity, with π value for 0.01046 and Hd for 0.99. The value of dN-dS (6.2231, p < 0.05) hinted at natural selection of PfTRAP on Bioko Island. Globally, the African PfTRAPs showed more diverse than the Asian ones, and significant genetic differentiation was discovered by the fixation index between African and Asian countries (Fst > 0.15, p < 0.05). 667 Asian isolates clustered in 136 haplotypes and 739 African isolates clustered in 528 haplotypes by network analysis. The mutations I116T, L221I, Y128F, G228V and P299S were predicted as probably damaging by PolyPhen online service, while mutations L49V, R285G, R285S, P299S and K421N would lead to a significant increase of free energy difference (ΔΔG > 1) indicated a destabilization of protein structure. CONCLUSIONS: Evidences in the present investigation supported that PfTRAP gene from Bioko Island and other malaria endemic countries is highly polymorphic (especially at T cell epitopes), which provided the genetic information background for developing an PfTRAP-based universal effective vaccine. Moreover, some mutations have been shown to be detrimental to the protein structure or function and deserve further study and continuous monitoring.
Asunto(s)
Malaria Falciparum/parasitología , Plasmodium falciparum/genética , Proteínas Protozoarias/genética , Epítopos , Guinea Ecuatorial/epidemiología , Frecuencia de los Genes , Variación Genética , Haplotipos , Humanos , Vacunas contra la Malaria , Malaria Falciparum/epidemiología , Malaria Falciparum/inmunología , Plasmodium falciparum/inmunología , Polimorfismo Genético , Proteínas Protozoarias/química , Proteínas Protozoarias/inmunología , Selección GenéticaRESUMEN
BACKGROUND: Desire for improved aesthetic contour of the lower third of the face has resulted in an increase in chin augmentation. Although many fillers, including hyaluronic acid (HA), autologous fat and stromal vascular fraction gel (SVF-gel), have been used to improve facial morphology, chin augmentation requires fillers that provide greater support. METHODS: The elastic and viscous moduli of SVF-gel and Coleman fat were assessed in vitro by rheological testing, whereas their elasticity were evaluated in vivo by ultrasonic elastography. Results in vitro were compared with those of highly elastic HA (HE-HA) and highly viscous HA (HV-HA), whereas results in vivo were compared with HE-HA. Changes in chin volume, SVF-gel retention rate and absorptivity for at least 12 months were measured by 3D white light scanning. Questionnaires were administered to assess patient satisfaction. RESULTS: The elastic and viscous modulus of SVF-gel was, respectively, slightly lower than HE-HA and HV-HA but higher than the other two in vitro, with the elasticity of the three layers of SVF-gel lower than HE-HA but slightly higher than normal control in vivo. The average retention rate was 62.34±3.34% at 12 months. The absorptivity of 90% of the samples was <3% from 6 to 12 months, which was considered stable. Patients expressed satisfaction with their results. CONCLUSION: SVF-gel has ideal rheologic characteristics in vitro, which has slightly higher elasticity than normal fat tissue of chin in vivo, and could keep well retention rate for chin augmentation in clinic. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .
Asunto(s)
Cara , Ácido Hialurónico , Tejido Adiposo/trasplante , Mentón/diagnóstico por imagen , Mentón/cirugía , Estética , HumanosRESUMEN
BACKGROUND: Fat grafting is a popular operative approach for rejuvenation. Some patients requiring facial fat grafting also have acne. Fat grafting may improve acne in some patients. OBJECTIVES: The aim of this study was to assess whether fat grafting can improve acne and to analyze the mechanism of action by which such improvement occurs. METHODS: Preoperative and postoperative digital photographs were examined retrospectively in 229 patients who underwent fat grafting to compare the numbers of inflammatory acne lesions. In addition, 18 patients with acne who were treated by injection of subdermal stromal vascular fraction gel (SVF-gel) were examined prospectively. The numbers of inflammatory acne lesions before and after treatment were measured, and changes in the levels of CD4+ T-cell infiltration were determined from immunohistochemical staining. RESULTS: Of the 229 retrospectively evaluated patients who underwent fat grafting, 22 had acne and had complete follow-up data; in these patients, the numbers of acne lesions were significantly lower after than before treatment. The 18 patients who received subdermal SVF-gel injection showed evident improvements in inflammatory lesions after more than 1 year of follow-up. CD4+ T-cell infiltration was significantly decreased at week 4. CONCLUSIONS: Facial fat grafting can improve inflammatory acne lesions, perhaps because adipose-derived stem cells, which are plentiful in SVF-gel, reduce CD4+ T-cell-mediated inflammation responses.
Asunto(s)
Acné Vulgar , Rejuvenecimiento , Acné Vulgar/diagnóstico , Acné Vulgar/terapia , Tejido Adiposo/trasplante , Cara , Humanos , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
Inflammatory responses mediated by macrophages play a role in tissue repair. However, it is unclear whether the repair in the donor site after liposuction would have any effects on fat graft retention in the recipient site. This study is designed to evaluate the effects of a macrophage-mediated inflammatory response in donor sites on long-term retention of fat grafting. In this study, mice were randomly divided into two groups. One underwent simulated liposuction, called the fat procurement plus grafting (Pro-Grafting) group, and the other underwent sham surgery, called the fat grafting only (Grafting Only) group. The prepared fat (0.3 ml each) was engrafted and cellular events over a 90-day period were assessed. We found macrophages were infiltrated into adipose tissue at the recipient site in the Grafting Only group within 7 days and the repair essentially completed within 30 days. By contrast, few macrophages infiltrated the recipient site in the Pro-Grafting group within 7 days and the entire remodeling process took 30 days longer in the Pro-Grafting than the Grafting Only group. Moreover, C-reactive protein levels were immediately upregulated after surgery, and the inflammatory factors' expression was higher at the donor rather than the recipient site. However, the repair processes and the long-term retention rate became normal when the adipose tissue was grafted after the donor site did not require macrophages for repair. Therefore, we suggest higher inflammatory factors promote macrophage infiltration and the adipose tissue regeneration process at the donor site. This process is delayed at the recipient site, which may affect long-term retention of fat grafts.
Asunto(s)
Tejido Adiposo/trasplante , Supervivencia de Injerto/fisiología , Inflamación/metabolismo , Neovascularización Fisiológica/genética , Tejido Adiposo/metabolismo , Tejido Adiposo/cirugía , Animales , Autoinjertos , Modelos Animales de Enfermedad , Humanos , Inflamación/fisiopatología , Lipectomía , Macrófagos/metabolismo , Ratones , Cicatrización de Heridas/genéticaRESUMEN
BACKGROUND: Plasmodium falciparum circumsporozoite protein (PfCSP) is a potential malaria vaccine candidate, but various polymorphisms of the pfcsp gene among global P. falciparum population become the major barrier to the effectiveness of vaccines. This study aimed to investigate the genetic polymorphisms and natural selection of pfcsp in Bioko and the comparison among global P. falciparum population. METHODS: From January 2011 to December 2018, 148 blood samples were collected from P. falciparum infected Bioko patients and 96 monoclonal sequences of them were successfully acquired and analysed with 2200 global pfcsp sequences mined from MalariaGEN Pf3k Database and NCBI. RESULTS: In Bioko, the N-terminus of pfcsp showed limited genetic variations and the numbers of repetitive sequences (NANP/NVDP) were mainly found as 40 (35%) and 41 (34%) in central region. Most polymorphic characters were found in Th2R/Th3R region, where natural selection (p > 0.05) and recombination occurred. The overall pattern of Bioko pfcsp gene had no obvious deviation from African mainland pfcsp (Fst = 0.00878, p < 0.05). The comparative analysis of Bioko and global pfcsp displayed the various mutation patterns and obvious geographic differentiation among populations from four continents (p < 0.05). The global pfcsp C-terminal sequences were clustered into 138 different haplotypes (H_1 to H_138). Only 3.35% of sequences matched 3D7 strain haplotype (H_1). CONCLUSIONS: The genetic polymorphism phenomena of pfcsp were found universal in Bioko and global isolates and the majority mutations located at T cell epitopes. Global genetic polymorphism and geographical characteristics were recommended to be considered for future improvement of malaria vaccine design.
Asunto(s)
Plasmodium falciparum/genética , Polimorfismo Genético , Proteínas Protozoarias/genética , Guinea Ecuatorial , Haplotipos , Selección GenéticaRESUMEN
RNA uptake by cells is critical for RNA-mediated gene interference (RNAi) and RNA-based therapeutics. In Caenorhabditis elegans, RNAi is systemic as a result of SID-1-mediated double-stranded RNA (dsRNA) across cells. Despite the functional importance, the underlying mechanisms of dsRNA internalization by SID-1 remain elusive. Here we describe cryogenic electron microscopy structures of SID-1, SID-1-dsRNA complex and human SID-1 homologs SIDT1 and SIDT2, elucidating the structural basis of dsRNA recognition and import by SID-1. The homodimeric SID-1 homologs share conserved architecture, but only SID-1 possesses the molecular determinants within its extracellular domains for distinguishing dsRNA from single-stranded RNA and DNA. We show that the removal of the long intracellular loop between transmembrane helix 1 and 2 attenuates dsRNA uptake and systemic RNAi in vivo, suggesting a possible endocytic mechanism of SID-1-mediated dsRNA internalization. Our study provides mechanistic insights into dsRNA internalization by SID-1, which may facilitate the development of dsRNA applications based on SID-1.
Asunto(s)
Proteínas de Caenorhabditis elegans , Caenorhabditis elegans , Microscopía por Crioelectrón , ARN Bicatenario , ARN Bicatenario/metabolismo , ARN Bicatenario/química , Animales , Proteínas de Caenorhabditis elegans/metabolismo , Proteínas de Caenorhabditis elegans/química , Proteínas de Caenorhabditis elegans/genética , Caenorhabditis elegans/metabolismo , Caenorhabditis elegans/genética , Humanos , Modelos Moleculares , Interferencia de ARN , Proteínas de la MembranaRESUMEN
Smad-ubiquitination regulator 2 (SMURF2) functions as a homolog of E6AP carboxyl terminus-type E3 ubiquitin ligase to regulate cell cycle progression and tumor growth factor expression. SMURF2 has been revealed to function as a tumor suppressor in a number of cancers; however, its function in papillary thyroid carcinoma (PTC) remains largely unknown. Therefore, the aim of the present study was to investigate the function of SMURF2 in PTC. Reverse transcription-quantitative PCR and western blotting were used to detect cellular expression of SMURF2 in vitro. After increasing or inhibiting the expression of SMURF2, MTT was used to detect the effect on tumor cell proliferation and Transwell assays were used to detect the effect on tumor cell migration and invasion. Finally, ELISA was used to detect the effects on glucose and glutamine metabolism in tumor cells and the findings revealed that SMURF2 was downregulated in PTC tissues. Moreover, SMURF2 inhibited the proliferation, invasion and migration of PTC cells, and promoted their apoptosis. Finally, SMURF2 inhibited cell glycolysis and glutaminolysis and affected metabolism in the PTC cell line, TPC-1. Thus, the findings of the present study suggest that SMURF2 may be a potential target in the treatment of PTC.