RESUMEN
Degradable polymer matrices and porous scaffolds provide powerful mechanisms for passive, sustained release of drugs relevant to the treatment of a broad range of diseases and conditions. Growing interest is in active control of pharmacokinetics tailored to the needs of the patient via programmable engineering platforms that include power sources, delivery mechanisms, communication hardware, and associated electronics, most typically in forms that require surgical extraction after a period of use. Here we report a light-controlled, self-powered technology that bypasses key disadvantages of these systems, in an overall design that is bioresorbable. Programmability relies on the use of an external light source to illuminate an implanted, wavelength-sensitive phototransistor to trigger a short circuit in an electrochemical cell structure that includes a metal gate valve as its anode. Consequent electrochemical corrosion eliminates the gate, thereby opening an underlying reservoir to release a dose of drugs by passive diffusion into surrounding tissue. A wavelength-division multiplexing strategy allows release to be programmed from any one or any arbitrary combination of a collection of reservoirs built into an integrated device. Studies of various bioresorbable electrode materials define the key considerations and guide optimized choices in designs. In vivo demonstrations of programmed release of lidocaine adjacent the sciatic nerves in rat models illustrate the functionality in the context of pain management, an essential aspect of patient care that could benefit from the results presented here.
Asunto(s)
Implantes Absorbibles , Sistemas de Liberación de Medicamentos , Ratas , Animales , Electrónica , PolímerosRESUMEN
Background and Objectives: The majority of patients who undergo hip fracture surgery do not recover their former level of physical function; hence, it is essential to establish a specific rehabilitation strategy for maximal functional recovery of patients after a hip fracture. Knowing which indicators of physical function in hip fracture patients have a significant impact on the decision regarding the place or timing of discharge would make it possible to plan and prepare for discharge as soon as possible. Therefore, this study aimed to investigate the relationship between physical function and discharge destination for older adult patients with hip fracture. Materials and Methods: In this retrospective cohort study, 150 hip fracture patients (mean age 78.9 ± 10.6 years) between January 2019 and June 2021 were enrolled. Patients were categorized into two groups according to their discharge destination, either home or facility. Demographic and disease-related characteristic data were collected from the medical records. All the patients completed performance-based physical function tests including the 10 Meter Walk Test (10MWT), Timed Up and Go test (TUG), Koval's grade, and Berg Balance Scale (BBS) at the start of rehabilitation and at discharge. A backward stepwise binary logistic regression analysis was then performed to determine the independent factors of the discharge destination. Results: The home discharge group had a significantly lower Koval's grade, lower TUG, higher BBS both at baseline and discharge, and younger age. Backward stepwise logistic binary regression analysis showed that TUG, BBS, and 10MWT at baseline and discharge were significant variables affecting the discharge destination after hip fracture. Conclusions: These results demonstrate that balance and gait in older adult patients with hip fractures are highly influential factors in the determining the discharge destination.
Asunto(s)
Fracturas de Cadera , Alta del Paciente , Rendimiento Físico Funcional , Humanos , Fracturas de Cadera/cirugía , Fracturas de Cadera/rehabilitación , Fracturas de Cadera/fisiopatología , Anciano , Femenino , Masculino , Alta del Paciente/estadística & datos numéricos , Alta del Paciente/normas , Estudios Retrospectivos , Anciano de 80 o más Años , Estudios de Cohortes , Recuperación de la FunciónRESUMEN
Organic/inorganic hybrid materials are utilized extensively as gate dielectric layers in organic thin-film transistors (OTFTs). However, inherently low dielectric constant of organic materials and lack of a reliable deposition process for organic layers hamper the broad application of hybrid dielectric materials. Here, a universal strategy to synthesize high-k hybrid dielectric materials by incorporating a high-k polymer layer on top of various inorganic layers generated by different fabrication methods, including AlOx and HfOx , is presented. Those hybrid dielectrics commonly exhibit high capacitance (>300 nF·cm-2 ) as well as excellent insulating properties. A vapor-phase deposition method is employed for precise control of the polymer film thickness. The ultralow-voltage (<3 V) OTFTs are demonstrated based on the hybrid dielectric layer with 100% yield and uniform electrical characteristics. Moreover, the exceptionally high stability of OTFTs for long-term operation (current change less than 5% even under 30 h of voltage stress at 2.0 MV·cm-1 ) is achieved. The hybrid dielectric is fully compatible with various substrates, which allows for the demonstration of intrinsically flexible OTFTs on the plastic substrate. It is believed that this approach for fabricating hybrid dielectrics by introducing the high-k organic material can be a promising strategy for future low-power, flexible electronics.
RESUMEN
Organic multi-valued logic (MVL) circuits can substantially improve the data processing efficiency in highly advanced wearable electronics. Organic ternary logic circuits can be implemented by utilizing the negative transconductance (NTC) of heterojunction transistors (H-TRs). To achieve high-performance organic ternary logic circuits, the range of NTC in H-TRs must be optimized in advance to ensure the well-defined intermediate logic state in ternary logic inverters (T-inverters). Herein, a simple and efficient strategy, which enables the systematic control of the range and position of NTC in H-TRs is presented. Each thickness of p-/n-type semiconductor in H-TRs is adjusted to control the channel conductivity. Furthermore, asymmetric source/drain (S/D) electrode structure is newly developed for H-TRs, which can adjust the amount of hole and electron injection, independently. Based on the semiconductor thickness variation and asymmetric S/D electrodes, the T-inverter exhibits full-swing operation with three distinguishable logic states, resulting in unprecedentedly high static noise margin (≈48% of the ideal value). Moreover, a flexible T-inverter with an ultrathin polymer dielectric is demonstrated, whose operating voltage is less than 8 V. The proposed strategy is fully compatible with the conventional integrated circuit design, which is highly desirable for broad applicability and scalability for various types of T-inverter production.
Asunto(s)
Semiconductores , Transistores Electrónicos , Electrodos , Electrónica , LógicaRESUMEN
Despite their capability, sub-10 nm periodic nano-patterns formed by strongly segregating block copolymer (BCP) thin films cannot be easily oriented perpendicular to the substrate due to the huge surface energy differences of the constituent blocks. To produce perpendicular nano-patterns, the interfacial energies of both the substrate and free interfaces should be controlled precisely to induce non-preferential wetting. Unfortunately, high-performance surface modification layers are challenging to design, and different kinds of surface modification methods must be devised respectively for each neutral layer and top coat. Furthermore, conventional approaches, largely based on spin-coating processes, are highly prone to defect formation and may readily cause dewetting at sub-10 nm thickness. To date, these obstacles have hampered the development of high-fidelity, sub-5 nm BCP patterns. Herein, an all-vapor phase deposition approach initiated chemical vapor deposition is demonstrated to form 9-nm-thick, uniform neutral bottom layer and top coat with exquisite control of composition and thickness. These layers are employed in BCP films to produce perpendicular cylinders with a diameter of ≈4 nm that propagate throughout a BCP thickness of up to ≈60 nm, corresponding to five natural domain spacings of the BCP. Such a robust approach will serve as an advancement for the reliable generation of sub-10 nm nano-patterns.
Asunto(s)
Nanoestructuras/química , Polímeros/química , Ensayo de Materiales , Metacrilatos/química , Nanoestructuras/ultraestructura , Tamaño de la Partícula , Polímeros/síntesis química , Poliestirenos/química , Propiedades de SuperficieRESUMEN
With the advent of artificial intelligence (AI), memristors have received significant interest as a synaptic building block for neuromorphic systems, where each synaptic memristor should operate in an analog fashion, exhibiting multilevel accessible conductance states. Here, we demonstrate that the transition of the operation mode in poly(1,3,5-trivinyl-1,3,5-trimethyl cyclotrisiloxane) (pV3D3)-based flexible memristor from conventional binary to synaptic analog switching can be achieved simply by reducing the size of the formed filament. With the quantized conductance states observed in the flexible pV3D3 memristor, analog potentiation and depression characteristics of the memristive synapse are obtained through the growth of atomically thin Cu filament and lateral dissolution of the filament via dominant electric field effect, respectively. The face classification capability of our memristor is evaluated via simulation using an artificial neural network consisting of pV3D3 memristor synapses. These results will encourage the development of soft neuromorphic intelligent systems.
Asunto(s)
Cobre/química , Nanoestructuras/química , Nanotecnología/instrumentación , Redes Neurales de la Computación , Siloxanos/química , Inteligencia Artificial , Conductividad Eléctrica , Diseño de Equipo , Cara/anatomía & histología , Humanos , Nanotecnología/métodosRESUMEN
Probabilistic inference in data-driven models is promising for predicting outputs and associated confidence levels, alleviating risks arising from overconfidence. However, implementing complex computations with minimal devices still remains challenging. Here, utilizing a heterojunction of p- and n-type semiconductors coupled with separate floating-gate configuration, a Gaussian-like memory transistor is proposed, where a programmable Gaussian-like current-voltage response is achieved within a single device. A separate floating-gate structure allows for exquisite control of the Gaussian-like current output to a significant extent through simple programming, with an over 10000 s retention performance and mechanical flexibility. This enables physical evaluation of complex distribution functions with the simplified circuit design and higher parallelism. Successful implementation for localization and obstacle avoidance tasks is demonstrated using Gaussian-like curves produced from Gaussian-like memory transistor. With its ultralow-power consumption, simplified design, and programmable Gaussian-like outputs, our 3-terminal Gaussian-like memory transistor holds potential as a hardware platform for probabilistic inference computing.
RESUMEN
Two-dimensional (2D) materials are considered attractive semiconducting layers for emerging field-effect transistors owing to their unique electronic and optoelectronic properties. Polymers have been utilized in combination with 2D semiconductors as gate dielectric layers in field-effect transistors (FETs). Despite their distinctive advantages, the applicability of polymer gate dielectric materials for 2D semiconductor FETs has rarely been discussed in a comprehensive manner. Therefore, this paper reviews recent progress relating to 2D semiconductor FETs based on a wide range of polymeric gate dielectric materials, including (1) solution-based polymer dielectrics, (2) vacuum-deposited polymer dielectrics, (3) ferroelectric polymers, and (4) ion gels. Exploiting appropriate materials and corresponding processes, polymer gate dielectrics have enhanced the performance of 2D semiconductor FETs and enabled the development of versatile device structures in energy-efficient ways. Furthermore, FET-based functional electronic devices, such as flash memory devices, photodetectors, ferroelectric memory devices, and flexible electronics, are highlighted in this review. This paper also outlines challenges and opportunities in order to help develop high-performance FETs based on 2D semiconductors and polymer gate dielectrics and realize their practical applications.
RESUMEN
A new type of heterojunction non-volatile memory transistor (H-MTR) has been developed, in which the negative transconductance (NTC) characteristics can be controlled systematically by a drain-aligned floating gate. In the H-MTR, a reliable transition between N-shaped transfer curves with distinct NTC and monolithically current-increasing transfer curves without apparent NTC can be accomplished through programming operation. Based on the H-MTR, a binary/ternary reconfigurable logic inverter (R-inverter) has been successfully implemented, which showed an unprecedentedly high static noise margin of 85% for binary logic operation and 59% for ternary logic operation, as well as long-term stability and outstanding cycle endurance. Furthermore, a ternary/binary dynamic logic conversion-in-memory has been demonstrated using a serially-connected R-inverter chain. The ternary/binary dynamic logic conversion-in-memory could generate three different output logic sequences for the same input signal in three logic levels, which is a new logic computing method that has never been presented before.
RESUMEN
The interface between dielectric and organic semiconductor is critically important in determining organic thin-film transistor (OTFT) performance. Surface polarity of the dielectric layer can hinder charge transport characteristics, which has restricted utilization of polymeric dielectric materials containing polar functional groups. Herein, the electrical characteristics of OTFTs are analyzed depending on the alkyl chain length of organic semiconductors and surface polarity of polymer dielectrics. High-performance dibenzothiopheno[6,5-b:6',5'-f]thieno[3,2-b]thiophene (DBTTT) and newly synthesized its alkylated derivatives (C6-DBTTT and C10-DBTTT) are utilized as organic semiconductors. As dielectric layers, non-polar poly(1,3,5-trimethyl-1,3,5-trivinylcyclitrisiloxane) (pV3D3) and poly(2-cyanoethyl acrylate-co-diethylene glycol divinyl ether) [p(CEA-co-DEGDVE)] with polar cyanide functionality are utilized. The fabricated OTFTs with pV3D3 commonly exhibit the excellent charge transport characteristics. In addition, the OTFT performance is improved with lengthening the alkyl chain in organic semiconductors, which can be attributed to the molecular orientation of semiconductors. On the other hand, non-alkylated DBTTT OTFTs with polar p(CEA-co-DEGDVE) show relatively poor electrical characteristics, while their performance is drastically enhanced with the alkylated DBTTTs. The ultraviolet photoelectron spectroscopy (UPS) reveals that surface polarity of the dielectric layer can be abated with alkyl chain in organic semiconductors. It is believed that this study can provide a useful insight to optimize dielectric/semiconductor interface to achieve high-performance OTFTs.
RESUMEN
PURPOSE: This study analyzed the current status of and correlations between Korean medical students' experiences and perspectives surrounding patient-centered medical education (PCME). METHODS: A structured PCME questionnaire composed of three categories, understanding patients within social and cultural contexts, understanding patients' individual health contexts through communication, and placement of patients at the center of medical education, was used. The students were stratified into pre-medical (Pre-med), medical (Med), and policlinic (PK) groups because of curriculum differences by grade. The χ2 test was applied to analyze the association between students' experiences with and perspectives on PCME. A Cramer's V of 0.200 was considered a large effect size for any association between experiences with and perspectives on PCME. RESULTS: Among the respondents, 50.6% answered that they did not know about patient-centered medicine before the survey. With increasing school years went up from Pre-med to PK, fewer students agreed that PCME should be added to pre-clinical medicine curricula (p<0.001), that patients should be in the center throughout medical education (p=0.011), and that patients' personal histories, values, and objectives are important PCME (p=0.001). Students who said they learned PCME for each category were more likely to consider PCME important (Cramer's V was 0.219 and 0.271 for "with," and "for the patients" respectively, p<0.001 for "about/with/for the patients"). Students in all groups chose clinical practice as the best method for PCME (p=0.021). Med group chose the lectures as the most effective tool to learn about the importance of communication (p<0.001). CONCLUSION: Students who experienced PCME were likely to perceive PCME as important and it showed that experiences of PCME had positive effects on PCME perceptions. Despite students' preferences for clinical practice as the best method for PCME, PK reported that they did not learn PCME, and regarded PCME as less important compared to students at earlier stages of their medical education. Therefore, more intensive and holistic PCME curricula rather than only clinical practice exposure may be necessary.
Asunto(s)
Educación Médica , Estudiantes de Medicina , Humanos , República de Corea , Curriculum , Atención Dirigida al PacienteRESUMEN
Vertical three-dimensional (3D) integration is a highly attractive strategy to integrate a large number of transistor devices per unit area. This approach has emerged to accommodate the higher demand of data processing capability and to circumvent the scaling limitation. A huge number of research efforts have been attempted to demonstrate vertically stacked electronics in the last two decades. In this review, we revisit materials and devices for the vertically integrated electronics with an emphasis on the emerging semiconductor materials that can be processable by bottom-up fabrication methods, which are suitable for future flexible and wearable electronics. The vertically stacked integrated circuits are reviewed based on the semiconductor materials: organic semiconductors, carbon nanotubes, metal oxide semiconductors, and atomically thin two-dimensional materials including transition metal dichalcogenides. The features, device performance, and fabrication methods for 3D integration of the transistor based on each semiconductor are discussed. Moreover, we highlight recent advances that can be important milestones in the vertically integrated electronics including advanced integrated circuits, sensors, and display systems. There are remaining challenges to overcome; however, we believe that the vertical 3D integration based on emerging semiconductor materials and devices can be a promising strategy for future electronics.
RESUMEN
Multi-valued logic (MVL) circuits based on heterojunction transistor (HTR) have emerged as an effective strategy for high-density information processing without increasing the circuit complexity. Herein, an organic ternary logic inverter (T-inverter) is demonstrated, where a nonvolatile floating-gate flash memory is employed to control the channel conductance systematically, thus realizing the stabilized T-inverter operation. The 3-dimensional (3D) T-inverter is fabricated in a vertically stacked form based on all-dry processes, which enables the high-density integration with high device uniformity. In the flash memory, ultrathin polymer dielectrics are utilized to reduce the programming/erasing voltage as well as operating voltage. With the optimum programming state, the 3D T-inverter fulfills all the important requirements such as full-swing operation, optimum intermediate logic value (~VDD/2), high DC gain exceeding 20 V/V as well as low-voltage operation (< 5 V). The organic flash memory exhibits long retention characteristics (current change less than 10% after 104 s), leading to the long-term stability of the 3D T-inverter. We believe the 3D T-inverter employing flash memory developed in this study can provide a useful insight to achieve high-performance MVL circuits.
RESUMEN
Recently reported winged microelectronic systems offer passive flight mechanisms as a dispersal strategy for purposes in environmental monitoring, population surveillance, pathogen tracking, and other applications. Initial studies indicate potential for technologies of this type, but advances in structural and responsive materials and in aerodynamically optimized geometries are necessary to improve the functionality and expand the modes of operation. Here, we introduce environmentally degradable materials as the basis of 3D fliers that allow remote, colorimetric assessments of multiple environmental parameters-pH, heavy metal concentrations, and ultraviolet exposure, along with humidity levels and temperature. Experimental and theoretical investigations of the aerodynamics of these systems reveal design considerations that include not only the geometries of the structures but also their mass distributions across a range of bioinspired designs. Preliminary field studies that rely on drones for deployment and for remote colorimetric analysis by machine learning interpretation of digital images illustrate scenarios for practical use.
RESUMEN
Physically transient forms of electronics enable unique classes of technologies, ranging from biomedical implants that disappear through processes of bioresorption after serving a clinical need to internet-of-things devices that harmlessly dissolve into the environment following a relevant period of use. Here, we develop a sustainable manufacturing pathway, based on ultrafast pulsed laser ablation, that can support high-volume, cost-effective manipulation of a diverse collection of organic and inorganic materials, each designed to degrade by hydrolysis or enzymatic activity, into patterned, multi-layered architectures with high resolution and accurate overlay registration. The technology can operate in patterning, thinning and/or cutting modes with (ultra)thin eco/bioresorbable materials of different types of semiconductors, dielectrics, and conductors on flexible substrates. Component-level demonstrations span passive and active devices, including diodes and field-effect transistors. Patterning these devices into interconnected layouts yields functional systems, as illustrated in examples that range from wireless implants as monitors of neural and cardiac activity, to thermal probes of microvascular flow, and multi-electrode arrays for biopotential sensing. These advances create important processing options for eco/bioresorbable materials and associated electronic systems, with immediate applicability across nearly all types of bioelectronic studies.
Asunto(s)
Implantes Absorbibles , Electrónica , Semiconductores , Electrodos , Rayos LáserRESUMEN
A one-step synthesis method is introduced and used to form an ultrathin, homogeneous organic-inorganic hybrid dielectric film with a high dielectric constant (high-k), based on initiated chemical vapor deposition. The hybrid dielectric is synthesized from tetrakis-dimethyl-amino-zirconium and 2-hydroxyethyl methacrylate, which are a high-k inorganic material and a soft organic material, respectively. A detailed material analysis on the synthesized ZrOx-organic hybrid (Zr-hybrid) is performed. The Zr-hybrid dielectric has a high dielectric constant of nine, leading to a film equivalent oxide thickness (EOT) as low as 3.2 nm, which is the lowest EOT obtained from a flexible dielectric layer to date. The leakage current density (J) is no larger than 6 × 10-7 A/cm2 at 2 MV/cm, and the breakdown field (Ebreak) was â¼3.3 MV/cm. The J of the Zr-hybrid dielectric remains almost constant even under the 2.5% strain condition, while that of the ZrO2 dielectric breaks down electrically at a tensile strain of less than 1.0%. The Zr-hybrid dielectric shows an energy band gap in the range of 5.2-5.4 eV and exhibits a sufficient valence band offset of around 3.0 eV with a pentacene organic semiconductor. The gate stack of the Zr-hybrid dielectric/pentacene semiconductor shows decent metal-oxide-semiconductor field-effect transistor performance even under a tensile strain of 1.67%, indicating that the Zr-hybrid is a promising gate dielectric for advanced flexible electronic applications.
RESUMEN
Polymer dielectric materials with hydroxyl functionalities such as poly(4-vinylphenol) and poly(vinyl alcohol) have been utilized widely in organic thin-film transistors (OTFTs) because of their excellent insulating performance gained by hydroxyl-mediated cross-linking. However, the polar hydroxyl functionality also deleteriously affects the performance of OTFTs and significantly impairs the device stability. In this study, a sub-20 nm, high-k copolymer dielectric with hydroxyl functionality, poly(2-hydroxyethyl acrylate-co-di(ethylene glycol) divinyl ether), was synthesized in the vapor phase via initiated chemical vapor deposition. The inherently dry environment offered by the vapor-phase polymer synthesis prompted the snuggling of polar hydroxyl functionalities into the bulk polymer film to form a molecular thin hydrophobic skin layer at its surface, verified by near-edge X-ray absorption fine structure analysis. The chemical composition of the copolymer dielectric was optimized systematically to achieve high dielectric constant (k ≈ 6.2) as well as extremely low leakage current densities (less than 3 × 10-8 A/cm2 in the range of ±2 MV/cm) even with sub-20 nm thickness, leading to one of the highest capacitance (higher than 300 nF/cm2) achieved by a single polymer dielectric to date. Exploiting the structural advantage of the cross-linked high-k polymer dielectric, high-performance OTFTs were obtained. Notably, the spontaneously formed molecular thin, hydrophobic skin layer in the copolymer film substantially suppressed the hysteresis in the transistor operation. The trap analysis also suggested the formation of bulk trap with a high energy barrier and sufficiently low trap densities at the semiconductor/dielectric interface, owing to the surface skin layer. Furthermore, the OTFTs with the -OH-containing copolymer dielectric showed an unprecedentedly excellent operational stability. No apparent OTFT degradation was observed up to 50 000 s of high constant voltage stress (corresponding to the applied electric field of 1.4 MV/cm) because of the markedly suppressed interfacial trap density by the hydrophobic skin layer, together with the current compensation by the bulk hydroxyl functionalities. We believe that the surface modification-free, one-step polymer dielectric synthetic strategy will provide a new insight into the design of polymer dielectric materials for high-performance, low-power soft electronic devices with high operational stability.
RESUMEN
Block copolymer (BCP) lithography is an effective nanopatterning methodology exploiting nanoscale self-assembled periodic patterns in BCP thin films. This approach has a critical limitation for nonplanar substrate geometry arising from the reflow and modification of BCP films upon the thermal or solvent annealing process, which is inevitable to induce the mobility of BCP chains for the self-assembly process. Herein, reflow-free, 3D BCP nanopatterning is demonstrated by introducing a conformally grown adlayer by the initiated chemical vapor deposition (iCVD) process. A highly cross-linked poly(divinylbenzene) layer was deposited directly onto the BCP thin film surface by iCVD, which effectively prevented the reflow of BCP thin film during an annealing process. BCP nanopatterns could be stabilized on various substrate geometry, including a nonplanar deformed polymer substrate, a pyramid shape substrate, and a graphene fiber surface. A fiber-type hydrogen evolution reaction (HER) catalyst is suggested by stabilizing lamellar Pt nanopatterns on severely rough graphene fiber surfaces.
RESUMEN
A series of high-k, ultrathin copolymer gate dielectrics were synthesized from 2-cyanoethyl acrylate (CEA) and di(ethylene glycol) divinyl ether (DEGDVE) monomers by a free radical polymerization via a one-step, vapor-phase, initiated chemical vapor deposition (iCVD) method. The chemical composition of the copolymers was systematically optimized by tuning the input ratio of the vaporized CEA and DEGDVE monomers to achieve a high dielectric constant (k) as well as excellent dielectric strength. Interestingly, DEGDVE was nonhomopolymerizable but it was able to form a copolymer with other kinds of monomers. Utilizing this interesting property of the DEGDVE cross-linker, the dielectric constant of the copolymer film could be maximized with minimum incorporation of the cross-linker moiety. To our knowledge, this is the first report on the synthesis of a cyanide-containing polymer in the vapor phase, where a high-purity polymer film with a maximized dielectric constant was achieved. The dielectric film with the optimized composition showed a dielectric constant greater than 6 and extremely low leakage current densities (<3 × 10-8 A/cm2 in the range of ±2 MV/cm), with a thickness of only 20 nm, which is an outstanding thickness for down-scalable cyanide polymer dielectrics. With this high-k dielectric layer, organic thin-film transistors (OTFTs) and oxide TFTs were fabricated, which showed hysteresis-free transfer characteristics with an operating voltage of less than 3 V. Furthermore, the flexible OTFTs retained their low gate leakage current and ideal TFT characteristics even under 2% applied tensile strain, which makes them some of the most flexible OTFTs reported to date. We believe that these ultrathin, high-k organic dielectric films with excellent mechanical flexibility will play a crucial role in future soft electronics.
RESUMEN
Resistive random access memory based on polymer thin films has been developed as a promising flexible nonvolatile memory for flexible electronic systems. Memory plays an important role in all modern electronic systems for data storage, processing, and communication; thus, the development of flexible memory is essential for the realization of flexible electronics. However, the existing solution-processed, polymer-based RRAMs have exhibited serious drawbacks in terms of the uniformity, electrical stability, and long-term stability of the polymer thin films. Here, we present poly(1,3,5-trimethyl-1,3,5-trivinyl cyclotrisiloxane) (pV3D3)-based RRAM arrays fabricated via the solvent-free technique called initiated chemical vapor deposition (iCVD) process for flexible memory application. Because of the outstanding chemical stability of pV3D3 films, the pV3D3-RRAM arrays can be fabricated by a conventional photolithography process. The pV3D3-RRAM on flexible substrates showed unipolar resistive switching memory with an on/off ratio of over 10(7), stable retention time for 10(5) s, excellent cycling endurance over 10(5) cycles, and robust immunity to mechanical stress. In addition, pV3D3-RRAMs showed good uniformity in terms of device-to-device distribution. The pV3D3-RRAM will pave the way for development of next-generation flexible nonvolatile memory devices.