Differential proteomics profile of microcapillary networks in response to sound pattern-driven local cell density enhancement.

Spatial cell organization and biofabrication of microcapillary networks in vitro has a great potential in tissue engineering and regenerative medicine. This study explores the impact of local cell density enhancement achieved through an innovative sound-based patterning on microcapillary networks formation and their proteomic profile. Human umbilical vein endothelial cells (HUVEC) and human pericytes from placenta (hPC-PL) were mixed in a fibrin suspension. The mild effect of sound-induced hydrodynamic forces condensed cells into architected geometries showing good fidelity to the numerical simulation of the physical process. Local cell density increased significantly within the patterned areas and the capillary-like structures formed following the cell density gradient. Over five days, these patterns were well-maintained, resulting in concentric circles and honeycomb-like structures. Proteomic analysis of the pre-condensed cells cultured for 5 days, revealed over 900 differentially expressed proteins when cells were preassembled through mild-hydrodynamic forces. Gene ontology (GO) enrichment analysis identified cellular components, molecular functions, and biological processes that were up- and down-regulated, providing insights regarding molecular processes influenced by the local density enhancement. Furthermore, we employed Ingenuity Pathway Analysis (IPA) to identify altered pathways and predict upstream regulators. Notably, VEGF-A emerged as one of the most prominent upstream regulators. Accordingly, this study initiates the unraveling of the changes in microcapillary networks at both molecular and proteins level induced by cell condensation obtained through sound patterning. The findings provide valuable insights for further investigation into sound patterning as a biofabrication technique for creating more complex microcapillary networks and advancing in vitro models.

Chitosan-Based Trilayer Scaffold for Multitissue Periodontal Regeneration.

Periodontal regeneration is still a challenge for periodontists and tissue engineers, as it requires the simultaneous restoration of different tissues-namely, cementum, gingiva, bone, and periodontal ligament (PDL). Here, we synthetized a chitosan (CH)-based trilayer porous scaffold to achieve periodontal regeneration driven by multitissue simultaneous healing. We produced 2 porous compartments for bone and gingiva regeneration by cross-linking with genipin either medium molecular weight (MMW) or low molecular weight (LMW) CH and freeze-drying the resulting scaffolds. We synthetized a third compartment for PDL regeneration by CH electrochemical deposition; this allowed us to produce highly oriented microchannels of about 450-µm diameter intended to drive PDL fiber growth toward the dental root. In vitro characterization showed rapid equilibrium water content for MMW-CH and LMW-CH compartments (equilibrium water content after 5 min >85%). The MMW-CH compartment degraded more slowly and provided significantly more resistance to compression (28% ± 1% of weight loss at 4 wk; compression modulus HA = 18 ± 6 kPa) than the LMW-CH compartment (34% ± 1%; 7.7 ± 0.8 kPa) as required to match the physiologic healing rates of bone and gingiva and their mechanical properties. More than 90% of all human primary periodontal cell populations tested on the corresponding compartment survived during cytocompatibility tests, showing active cell metabolism in the alkaline phosphatase and collagen deposition assays. In vivo tests showed high biocompatibility in wild-type mice, tissue ingrowth, and vascularization within the scaffold. Using the periodontal ectopic model in nude mice, we preseeded scaffold compartments with human gingival fibroblasts, osteoblasts, and PDL fibroblasts and found a dense mineralized matrix within the MMW-CH region, with weakly mineralized deposits at the dentin interface. Together, these results support this resorbable trilayer scaffold as a promising candidate for periodontal regeneration.

Bioreactor mechanically guided 3D mesenchymal stem cell chondrogenesis using a biocompatible novel thermo-reversible methylcellulose-based hydrogel.

Autologous chondrocyte implantation for cartilage repair represents a challenge because strongly limited by chondrocytes' poor expansion capacity in vitro. Mesenchymal stem cells (MSCs) can differentiate into chondrocytes, while mechanical loading has been proposed as alternative strategy to induce chondrogenesis excluding the use of exogenous factors. Moreover, MSC supporting material selection is fundamental to allow for an active interaction with cells. Here, we tested a novel thermo-reversible hydrogel composed of 8% w/v methylcellulose (MC) in a 0.05 M Na2SO4 solution. MC hydrogel was obtained by dispersion technique and its thermo-reversibility, mechanical properties, degradation and swelling were investigated, demonstrating a solution-gelation transition between 34 and 37 °C and a low bulk degradation (<20%) after 1 month. The lack of any hydrogel-derived immunoreaction was demonstrated in vivo by mice subcutaneous implantation. To induce in vitro chondrogenesis, MSCs were seeded into MC solution retained within a porous polyurethane (PU) matrix. PU-MC composites were subjected to a combination of compression and shear forces for 21 days in a custom made bioreactor. Mechanical stimulation led to a significant increase in chondrogenic gene expression, while histological analysis detected sulphated glycosaminoglycans and collagen II only in loaded specimens, confirming MC hydrogel suitability to support load induced MSCs chondrogenesis.

Nanogrooves and keratin nanofibers on titanium surfaces aimed at driving gingival fibroblasts alignment and proliferation without increasing bacterial adhesion.

Periimplantitis and epithelial downgrowth are nowadays the main conditions associated to transmucosal dental implants. Gingival fibroblasts can play an important role in periimplantitis because they are the promoters of the inflammatory process and eventual tissue homeostasis and destruction. Moreover, the related inflammatory state is commonly driven also to counteract bacteria implants colonization. In the present research, a new technology based on mechanically produced nanogrooves (0.1-0.2µm) and keratin nanofibers deposited by electrospinning has been proposed in order to obtain titanium surfaces able to drive gingival fibroblasts alignment and proliferation without increasing bacterial adhesion. The prepared surfaces have been characterized for their morphology (FESEM), chemical composition (FTIR, XPS), surface charge (zeta potential) and wettability (contact angle). Afterwards, their performances in terms of cells (human primary gingival fibroblasts) and bacteria (Staphylococcus aureus) adhesion were compared to mirror-like polished titanium surfaces. Results revealed that gingival fibroblasts viability was not negatively affected by the applied surface roughness or by keratin nanofibers. On the opposite, cells adhesion and spread were strongly influenced by surface roughness revealing a significant cell orientation along the produced nanogrooves. However, the keratin influence was clearly predominant with respect to surface topography, thus leading to increased cells proliferation on the surfaces with nanofibers, disregarding the presence of the surfaces grooves. Moreover, nor nanogrooves nor keratin nanofibers increase bacterial biofilm adhesion in comparison with mirror polished surfaces. Thus, the present research represents a promising innovative strategy and technology for a surface modification finalized to match the main requirements for transmucosal dental implants.

How do wettability, zeta potential and hydroxylation degree affect the biological response of biomaterials?

It is well known that composition, electric charge, wettability and roughness of implant surfaces have great influence on their interaction with the biological fluids and tissues, but systematic studies of different materials in the same experimental conditions are still lacking in the scientific literature. The aim of this research is to investigate the correlations between some surface characteristics (wettability, zeta potential and hydroxylation degree) and the biological response (protein adsorption, blood wettability, cell and bacterial adhesion) to some model biomaterials. The resulting knowledge can be applied for the development of future innovative surfaces for implantable biomaterials. Roughness was not considered as a variable because it is a widely explored feature: smooth surfaces prepared by a controlled protocol were compared in order to have no roughness effects. Three oxides (ZrO2, Al2O3, SiO2), three metals (316LSS steel, Ti, Nb) and two polymers (corona treated polystyrene for cell culture and untreated polystyrene for bacteria culture), widely used for biomedical applications, were considered. The surfaces were characterized by contact profilometry, SEM-EDS, XPS, FTIR, zeta potential and wettability with different fluids. Protein adsorption, blood wettability, bacterial and cell adhesion were evaluated in order to investigate the correlations between the surface physiochemical properties and biological responses. From a methodological standpoint, XPS and electrokinetic measurements emerged as the more suitable techniques respectively for the evaluation of hydroxylation degree and surface charge/isoelectric point. Moreover, determination of wettability by blood appeared a specific and crucial test, the results of which are not easily predictable by using other type of tests. Hydroxylation degree resulted correlated to the wettability by water, but not directly to surface charge. Wetting tests with different media showed the possibility to highlight some differences among look-alike materials. A dependence of protein absorption on hydroxylation degree, charge and wettability was evidenced and its maximum was registered for surfaces with low wettability in both water based and protein containing media and a moderate surface charge. As far as bacterial adhesion is concerned, no effect of surface charge or protein adsorption was evidenced, while the presence of a high acid component of the surface energy appeared significant. Finally, the combination of hydroxylation degree, wettability, surface charge and energy (polar component) emerged as a key parameter for cell adhesion and viability.

The effect of silver or gallium doped titanium against the multidrug resistant Acinetobacter baumannii.

Implant-related infection of biomaterials is one of the main causes of arthroplasty and osteosynthesis failure. Bacteria, such as the rapidly-emerging Multi Drug Resistant (MDR) pathogen Acinetobacter Baumannii, initiate the infection by adhering to biomaterials and forming a biofilm. Since the implant surface plays a crucial role in early bacterial adhesion phases, titanium was electrochemically modified by an Anodic Spark Deposition (ASD) treatment, developed previously and thought to provide osseo-integrative properties. In this study, the treatment was modified to insert gallium or silver onto the titanium surface, to provide antibacterial properties. The material was characterized morphologically, chemically, and mechanically; biological properties were investigated by direct cytocompatibility assay, Alkaline Phosphatase (ALP) activity, Scanning Electron Microscopy (SEM), and Immunofluorescent (IF) analysis; antibacterial activity was determined by counting Colony Forming Units, and viability assay. The various ASD-treated surfaces showed similar morphology, micrometric pore size, and uniform pore distribution. Of the treatments studied, gallium-doped specimens showed the best ALP synthesis and antibacterial properties. This study demonstrates the possibility of successfully doping the surface of titanium with gallium or silver, using the ASD technique; this approach can provide antibacterial properties and maintain high osseo-integrative potential.

Data in support of Gallium (Ga(3+)) antibacterial activities to counteract E. coli and S. epidermidis biofilm formation onto pro-osteointegrative titanium surfaces.

This paper contains original data supporting the antibacterial activities of Gallium (Ga(3+))-doped pro-osteointegrative titanium alloys, obtained via Anodic Spark Deposition (ASD), as described in "The effect of silver or gallium doped titanium against the multidrug resistant Acinetobacter baumannii" (Cochis et al. 2016) [1]. In this article we included an indirect cytocompatibility evaluation towards Saos2 human osteoblasts and extended the microbial evaluation of the Ga(3+) enriched titanium surfaces against the biofilm former Escherichia coli and Staphylococcus epidermidis strains. Cell viability was assayed by the Alamar Blue test, while bacterial viability was evaluated by the metabolic colorimetric 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay. Finally biofilm morphology was analyzed by Scanning Electron Microscopy (SEM). Data regarding Ga(3+) activity were compared to Silver.