Presynaptic targeting of botulinum neurotoxin type A requires a tripartite PSG-Syt1-SV2 plasma membrane nanocluster for synaptic vesicle entry.

The unique nerve terminal targeting of botulinum neurotoxin type A (BoNT/A) is due to its capacity to bind two receptors on the neuronal plasma membrane: polysialoganglioside (PSG) and synaptic vesicle glycoprotein 2 (SV2). Whether and how PSGs and SV2 may coordinate other proteins for BoNT/A recruitment and internalization remains unknown. Here, we demonstrate that the targeted endocytosis of BoNT/A into synaptic vesicles (SVs) requires a tripartite surface nanocluster. Live-cell super-resolution imaging and electron microscopy of catalytically inactivated BoNT/A wildtype and receptor-binding-deficient mutants in cultured hippocampal neurons demonstrated that BoNT/A must bind coincidentally to a PSG and SV2 to target synaptic vesicles. We reveal that BoNT/A simultaneously interacts with a preassembled PSG-synaptotagmin-1 (Syt1) complex and SV2 on the neuronal plasma membrane, facilitating Syt1-SV2 nanoclustering that controls endocytic sorting of the toxin into synaptic vesicles. Syt1 CRISPRi knockdown suppressed BoNT/A- and BoNT/E-induced neurointoxication as quantified by SNAP-25 cleavage, suggesting that this tripartite nanocluster may be a unifying entry point for selected botulinum neurotoxins that hijack this for synaptic vesicle targeting.

Effects of extracellular matrix viscoelasticity on cellular behaviour.

Substantial research over the past two decades has established that extracellular matrix (ECM) elasticity, or stiffness, affects fundamental cellular processes, including spreading, growth, proliferation, migration, differentiation and organoid formation. Linearly elastic polyacrylamide hydrogels and polydimethylsiloxane (PDMS) elastomers coated with ECM proteins are widely used to assess the role of stiffness, and results from such experiments are often assumed to reproduce the effect of the mechanical environment experienced by cells in vivo. However, tissues and ECMs are not linearly elastic materials-they exhibit far more complex mechanical behaviours, including viscoelasticity (a time-dependent response to loading or deformation), as well as mechanical plasticity and nonlinear elasticity. Here we review the complex mechanical behaviours of tissues and ECMs, discuss the effect of ECM viscoelasticity on cells, and describe the potential use of viscoelastic biomaterials in regenerative medicine. Recent work has revealed that matrix viscoelasticity regulates these same fundamental cell processes, and can promote behaviours that are not observed with elastic hydrogels in both two- and three-dimensional culture microenvironments. These findings have provided insights into cell-matrix interactions and how these interactions differentially modulate mechano-sensitive molecular pathways in cells. Moreover, these results suggest design guidelines for the next generation of biomaterials, with the goal of matching tissue and ECM mechanics for in vitro tissue models and applications in regenerative medicine.

High-Throughput Routes to Biomaterials Discovery.

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

The focal adhesion targeting domain of p130Cas confers a mechanosensing function.

Members of the Cas family of focal adhesion proteins contain a highly conserved C-terminal focal adhesion targeting (FAT) domain. To determine the role of the FAT domain in these proteins, we compared wild-type exogenous NEDD9 with a hybrid construct in which the NEDD9 FAT domain had been exchanged for the p130Cas (also known as BCAR1) FAT domain. Fluorescence recovery after photobleaching (FRAP) revealed significantly slowed exchange of the fusion protein at focal adhesions and significantly slower two-dimensional migration. No differences were detected in cell stiffness as measured using atomic force microscopy (AFM) and in cell adhesion forces measured with a magnetic tweezer device. Thus, the slowed migration was not due to changes in cell stiffness or adhesion strength. Analysis of cell migration on surfaces of increasing rigidity revealed a striking reduction of cell motility in cells expressing the p130Cas FAT domain. The p130Cas FAT domain induced rigidity-dependent phosphorylation of tyrosine residues within NEDD9. This in turn reduced post-translational cleavage of NEDD9, which we show inhibits NEDD9-induced migration. Collectively, our data therefore suggest that the p130Cas FAT domain uniquely confers a mechanosensing function.

Tropomyosin Tpm 2.1 loss induces glioblastoma spreading in soft brain-like environments.

INTRODUCTION: The brain is a very soft tissue. Glioblastoma (GBM) brain tumours are highly infiltrative into the surrounding healthy brain tissue and invasion mechanisms that have been defined using rigid substrates therefore may not apply to GBM dissemination. GBMs characteristically lose expression of the high molecular weight tropomyosins, a class of actin-associating proteins and essential regulators of the actin stress fibres and focal adhesions that underpin cell migration on rigid substrates. METHODS: Here, we investigated how loss of the high molecular weight tropomyosins affects GBM on soft matrices that recapitulate the biomechanical architecture of the brain. RESULTS: We find that Tpm 2.1 is down-regulated in GBM grown on soft substrates. We demonstrate that Tpm 2.1 depletion by siRNA induces cell spreading and elongation in soft 3D hydrogels, irrespective of matrix composition. Tpm 1.7, a second high molecular weight tropomyosin is also down-regulated when cells are cultured on soft brain-like surfaces and we show that effects of this isoform are matrix dependent, with Tpm 1.7 inducing cell rounding in 3D collagen gels. Finally, we show that the absence of Tpm 2.1 from primary patient-derived GBMs correlates with elongated, mesenchymal invasion. CONCLUSIONS: We propose that Tpm 2.1 down-regulation facilitates GBM colonisation of the soft brain environment. This specialisation of the GBM actin cytoskeleton organisation that is highly suited to the soft brain-like environment may provide novel therapeutic targets for arresting GBM invasion.

Targeted, Stimuli-Responsive Delivery of Plasmid DNA and miRNAs Using a Facile Self-Assembled Supramolecular Nanoparticle System.

Gene therapy is rapidly regaining traction in terms of research activity and investment across the globe, with clear potential to revolutionize medicine and tissue regeneration. Viral vectors remain the most commonly utilized gene delivery vehicles, due to their high efficiency, however, they are acknowledged to have numerous drawbacks, including limited payload capacity, lack of cell-type specificity, and risk of possible mutations in vivo, hence, patient safety. Synthetic nanoparticle gene delivery systems can offer substantial advantages over viral vectors. They can be utilized as off-the-shelf components to package genetic material, display targeting ligands, and release payloads upon environmental triggers and enable the possibility of programmed cell-specific uptake and transfection. In this study, we have synthesized three functional polymeric building blocks that, in a rapid, facile, tailorable, and stage-wise manner, associate through both electrostatic and noncovalent hydrophobic "host-guest" interactions to form monodisperse self-assembled nanoparticles (SaNP). We show that these SaNPs successfully package significant amounts of microRNA through to plasmid DNA, present desired ligands on their outer surface for targeted receptor-mediated cell-specific uptake and affect efficient translation of packaged plasmids. We confirm that these SaNPs outperform commercially available, gold standard transfection agents in terms of in vitro transfection efficiencies and have very low cytotoxicity. With facile self-assembly and tailorable composition, our SaNP gene delivery system has significant potential in targeted gene therapy applications.

Encoding Stem-Cell-Secreted Extracellular Matrix Protein Capture in Two and Three Dimensions Using Protein Binding Peptides.

Capturing cell-secreted extracellular matrix (ECM) proteins through cooperative binding with high specificity and affinity is an important function of native tissue matrices during both tissue homeostasis and repair. However, while synthetic hydrogels, such as those based on poly(ethylene glycol) (PEG), are often proposed as ideal materials to deliver human mesenchymal stem cells (hMSCs) to sites of injury to enable tissue repair, they do not have this capability-a capability that would enable cells to actively remodel their local extracellular microenvironment and potentially provide the required feedback control for more effective tissue genesis. In this work, we detail a methodology that engenders poly(ethylene glycol) (PEG)-based two-dimensional substrates and three-dimensional porous hydrogels with the ability to capture desired extracellular matrix (ECM) proteins with high specificity. This "encoded" ECM protein capture is achieved by decorating the PEG-based materials with protein binding peptides (PBPs) synthesized to be specific in their binding of fibronectin, laminin, and collagen I, which are not only the most omnipresent ECM proteins in human tissues but, as we confirmed, are also secreted to differing extents by hMSCs under in vitro maintenance conditions. By encapsulating hMSCs into these PBP-functionalized hydrogels, and culturing them in protein-free maintenance media, we demonstrate that these PBPs not only actively recruit targeted ECM proteins as they are secreted from hMSCs but also retain them to much higher levels compared to nonfunctionalized gels. This novel approach thus enables the fabrication of encoded surfaces and hydrogels that capture cell-secreted proteins, with high specificity and affinity, in a programmable manner, ready for applications in many bioengineering applications, including bioactive surface coatings, bioassays, stem cell culture, tissue engineering, and regenerative medicine.

Accelerated Combinatorial High Throughput Star Polymer Synthesis via a Rapid One-Pot Sequential Aqueous RAFT (rosa-RAFT) Polymerization Scheme.

Advanced polymerization methodologies, such as reversible addition-fragmentation transfer (RAFT), allow unprecedented control over star polymer composition, topology, and functionality. However, using RAFT to produce high throughput (HTP) combinatorial star polymer libraries remains, to date, impracticable due to several technical limitations. Herein, the methodology "rapid one-pot sequential aqueous RAFT" or "rosa-RAFT," in which well-defined homo-, copolymer, and mikto-arm star polymers can be prepared in very low to medium reaction volumes (50 µL to 2 mL) via an "arm-first" approach in air within minutes, is reported. Due to the high conversion of a variety of acrylamide/acrylate monomers achieved during each successive short reaction step (each taking 3 min), the requirement for intermediary purification is avoided, drastically facilitating and accelerating the star synthesis process. The presented methodology enables RAFT to be applied to HTP polymeric bio/nanomaterials discovery pipelines, in which hundreds of complex polymeric formulations can be rapidly produced, screened, and scaled up for assessment in a wide range of applications.

Control of autophagosome axonal retrograde flux by presynaptic activity unveiled using botulinum neurotoxin type a.

Botulinum neurotoxin type A (BoNT/A) is a highly potent neurotoxin that elicits flaccid paralysis by enzymatic cleavage of the exocytic machinery component SNAP25 in motor nerve terminals. However, recent evidence suggests that the neurotoxic activity of BoNT/A is not restricted to the periphery, but also reaches the CNS after retrograde axonal transport. Because BoNT/A is internalized in recycling synaptic vesicles, it is unclear which compartment facilitates this transport. Using live-cell confocal and single-molecule imaging of rat hippocampal neurons cultured in microfluidic devices, we show that the activity-dependent uptake of the binding domain of the BoNT/A heavy chain (BoNT/A-Hc) is followed by a delayed increase in retrograde axonal transport of BoNT/A-Hc carriers. Consistent with a role of presynaptic activity in initiating transport of the active toxin, activity-dependent uptake of BoNT/A in the terminal led to a significant increase in SNAP25 cleavage detected in the soma chamber compared with nonstimulated neurons. Surprisingly, most endocytosed BoNT/A-Hc was incorporated into LC3-positive autophagosomes generated in the nerve terminals, which then underwent retrograde transport to the cell soma, where they fused with lysosomes both in vitro and in vivo. Blocking autophagosome formation or acidification with wortmannin or bafilomycin A1, respectively, inhibited the activity-dependent retrograde trafficking of BoNT/A-Hc. Our data demonstrate that both the presynaptic formation of autophagosomes and the initiation of their retrograde trafficking are tightly regulated by presynaptic activity.

High-throughput bone and cartilage micropellet manufacture, followed by assembly of micropellets into biphasic osteochondral tissue.

Engineered biphasic osteochondral tissues may have utility in cartilage defect repair. As bone-marrow-derived mesenchymal stem/stromal cells (MSC) have the capacity to make both bone-like and cartilage-like tissues, they are an ideal cell population for use in the manufacture of osteochondral tissues. Effective differentiation of MSC to bone-like and cartilage-like tissues requires two unique medium formulations and this presents a challenge both in achieving initial MSC differentiation and in maintaining tissue stability when the unified osteochondral tissue is subsequently cultured in a single medium formulation. In this proof-of-principle study, we used an in-house fabricated microwell platform to manufacture thousands of micropellets formed from 166 MSC each. We then characterized the development of bone-like and cartilage-like tissue formation in the micropellets maintained for 8-14 days in sequential combinations of osteogenic or chondrogenic induction medium. When bone-like or cartilage-like micropellets were induced for only 8 days, they displayed significant phenotypic changes when the osteogenic or chondrogenic induction medium, respectively, was swapped. Based on these data, we developed an extended 14-day protocol for the pre-culture of bone-like and cartilage-like micropellets in their respective induction medium. Unified osteochondral tissues were formed by layering 12,000 osteogenic micropellets and 12,000 chondrogenic micropellets into a biphasic structure and then further culture in chondrogenic induction medium. The assembled tissue was cultured for a further 8 days and characterized via histology. The micropellets had amalgamated into a continuous structure with distinctive bone-like and cartilage-like regions. This proof-of-concept study demonstrates the feasibility of micropellet assembly for the formation of osteochondral-like tissues for possible use in osteochondral defect repair.

Use of two-step grafting to fabricate dual-functional films and site-specific functionalized scaffolds.

Polycaprolactone (PCL) is a widely utilized bioresorbable polymer in tissue engineering applications. However, the absence of intrinsic functional groups in the polymer backbone necessitates the incorporation of functional chemistries to enable the further addition of bioactive molecules to PCL-based surfaces and scaffolds. The current study aimed to incorporate two different functional groups, amine and carboxylate, first on two-dimensional (2D) spin-coated PCL films and, thereafter, throughout all surfaces within three-dimensional (3D) porous PCL-based scaffolds, produced using the thermally induced phase separation (TIPS) method, but in a spatially separated manner. Specifically, gamma irradiation induced grafting of acrylic acid (AA) and 2-aminoethyl methacrylate hydrochloride (AEMA) onto PCL was performed in selected solvents and the resulting substrates were characterized using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements to determine the surface free energy. Results demonstrated that stepwise graft copolymerization of AEMA and AA allows the fabrication of dual-functional surfaces, with chemistry depending on the order of grafting of the two monomers. In addition, 3D scaffolds could be decorated exclusively with carboxylate groups in the interior, while the outer surface displayed dual-functionality. This simple surface modification methodology, with the ability to create spatially separated surface functional groups throughout 3D porous scaffolds post their fabrication, has the potential to be applied to many current and future scaffold systems being investigated in the field of tissue engineering.

Hydrolytically degradable polyrotaxane hydrogels for drug and cell delivery applications.

Self-assembled pseudopolyrotaxane (PPR) hydrogels formed from Pluronic polymers and α-cyclodextrin (α-CD) have been shown to display a wide range of tailorable physical and chemical properties that may see them exploited in a multitude of future biomedical applications. Upon the mixing of both components, these self-assembling hydrogels reach a metastable thermodynamic state that is defined by the concentrations of both components in solution and the temperature. However, at present, their potential is severely limited by the very nature by which they form and hence also disassemble. Even if the temperature is kept constant, PPR hydrogels will dissociate and collapse within a few hours when immersed in a liquid (such as cell culture media) that contains a lower concentrations of, or no, Pluronic or α-CD due to differences in chemical potential driving dissolution. In this article, an enzymatically mediated covalent cross-linking function and branched eight-arm poly(ethylene glycol) (PEG) were thus introduced into the PPR hydrogels to improve their robustness to such environmental changes. The eight-arm PEG also acted as an end-capping group to prevent the dethreading of the α-CD molecules. The covalent cross-linking successfully extended the lifetime of the hydrogels when placed in cell culture media from a few hours to up to 1 week, with the ability to control the degradation rate (now initiated by hydrolysis of the introduced ester bonds and not by dissolution) by changing the amount of eight-arm PEG present in the hydrogels. Highly tunable hydrogels were obtained with an elastic modulus between 20 and 410 kPa and a viscous modulus between 150 Pa and 22 kPa by varying the concentrations of α-CD and eight-arm PEG. Sustained release of a model drug from the hydrogels was achieved, and viability of mouse fibroblasts encapsulated in these hydrogels was assessed. These self-assembling, hydrolytically degradable, and highly tunable hydrogels are seen to have potential applications in tissue engineering relying on controlled drug or cell delivery to sites targeted for repair.

Effects of synthetic biomacromolecule addition on the flow behavior of concentrated mesenchymal cell suspensions.

In the fields of tissue engineering and regenerative medicine, many researchers and companies alike are investigating the utility of concentrated mesenchymal stem cell suspensions as therapeutic injectables, with the hope of regenerating the damaged tissue site. These cells are seldom used alone, being instead combined with synthetic biomacromolecules, such as branched poly(ethylene glycol) (PEG) polymers, in order to form cross-linked hydrogels postinjection. In this article, we present the results of a detailed experimental and analytical investigation into the impacts of a range of eight-arm PEG polymers, each presenting functional end groups, on the rheological properties of concentrated living cells of mesenchymal origin. Using two-photon confocal microscopy, we confirmed that the aggregates formed by the cells are fractal structures, the dimension of which changed with PEG polymer type addition. From these results and the observed substantial variation in rheological footprint with increasing volume fraction and different PEG polymer type, we propose a number of mechanisms driving such structural changes. Lastly, we derived a modified Krieger-Dougherty model to produce a master curve for the relative viscosity as a function of volume fraction over the range of conditions investigated (including shear stress and PEG polymer type), from which we extract the adhesion force between individual cells within these concentrated suspensions. The outcomes of this study provide new insights into the complex interactions occurring in concentrated mesenchymal cell suspensions when combined with synthetic biomacromolecules commonly used as precursors in tissue engineering hydrogels, highlighting their substantial impacts on the resultant rheological footprint.

Lateral spacing of adhesion peptides influences human mesenchymal stem cell behaviour.

Mesenchymal stem cells (MSCs) have attracted great interest in recent years for tissue engineering and regenerative medicine applications due to their ease of isolation and multipotent differentiation capacity. In the past, MSC research has focussed on the effects of soluble cues, such as growth factors and cytokines; however, there is now increasing interest in understanding how parameters such as substrate modulus, specific extracellular matrix (ECM) components and the ways in which these are presented to the cell can influence MSC properties. Here we use surfaces of self-assembled maleimide-functionalized polystyrene-block-poly(ethylene oxide) copolymers (PS-PEO-Ma) to investigate how the spatial arrangement of cell adhesion ligands affects MSC behaviour. By changing the ratio of PS-PEO-Ma in mixtures of block copolymer and polystyrene homopolymer, we can create surfaces with lateral spacing of the PEO-Ma domains ranging from 34 to 62 nm. Through subsequent binding of cysteine-GRGDS peptides to the maleimide-terminated end of the PEO chains in each of these domains, we are able to present tailored surfaces of controlled lateral spacing of RGD (arginine-glycine-aspartic acid) peptides to MSCs. We demonstrate that adhesion of MSCs to the RGD-functionalized block-copolymer surfaces is through specific attachment to the presented RGD motif and that this is mediated by α5, αV, ß1 and ß3 integrins. We show that as the lateral spacing of the peptides is increased, the ability of the MSCs to spread is diminished and that the morphology changes from well-spread cells with normal fibroblastic morphology and defined stress-fibres, to less-spread cells with numerous cell protrusions and few stress fibres. In addition, the ability of MSCs to form mature focal adhesions is reduced on substrates with increased lateral spacing. Finally, we investigate differentiation and use qRT-PCR determination of gene expression levels and a quantitative alkaline phosphatase assay to show that MSC osteogenesis is reduced on surfaces with increased lateral spacing while adipogenic differentiation is increased. We show here, for the first time, that the lateral spacing of adhesion peptides affects human MSC (hMSC) properties and might therefore be a useful parameter with which to modify hMSC behaviour in future tissue engineering strategies.

Modulation of stem cell adhesion and morphology via facile control over surface presentation of cell adhesion molecules.

To encourage cell adhesion on biomaterial surfaces in a more facile, safe, and low-cost fashion, we have demonstrated a noncovalent approach to spatially conjugate ß-cyclodextrin (ß-CD) modified peptide sequences onto self-assembled adamantane-terminated polystyrene-b-poly(ethylene oxide) (PS-PEO-Ada) films through inclusion complexing interactions between ß-CDs and adamantane. By simply blending various ratios of unmodified PS-PEO with a newly synthesized PS-PEO-Ada, we produced PS polymer films that displayed well-organized adamantine-decorated cylindrical PEO domains with varying average interdomain spacings ranging from 29 to 47 nm. The presence of the adamantane moiety at the terminal end of the PEO chain permitted rapid, and importantly, oriented attachment of ß-CD functionalized peptides onto these surfaces. This one-step process not only converted these proven nonadherent PS-PEO surfaces into adherent surfaces, but also permitted precisely controlled presentation and surface distribution of the conjugated peptides. The utility of these surfaces as cell culture substrates was confirmed with human mesenchymal stem cells (hMSCs). We observed that with increasing PS-PEO-Ada content in the PEO cylindrical domains, these novel polymer films displayed improved cell attachment and spreading, with notable differences in hMSC morphology. We further confirmed that this novel PS-PEO-Ada surface provides a flexible platform for facile conjugation of mixtures of ß-CDs functionalized with different peptides, specifically RGD and IKVAV peptides. The cell adhesion and spreading assays on these surfaces indicated that the morphologies of hMSCs can be easily manipulated, while no significant changes in cell attachment were observed. The lock-and-key peptide conjugation technique presented in this work is applicable to any substrate that incorporates a moiety capable of forming inclusion complexes with α-, ß-, and γ-CDs, providing a facile and flexible method by which to construct peptide-conjugated biomaterial substrates for a multitude of applications in fields ranging from cell bioprocessing and regenerative medicine to cell-based assays.

A rapid and cost-effective method of producing recombinant proBNP and NT-proBNP variants in Escherichia coli for immunoassay of heart failure.

The measurements of plasma natriuretic peptides (NT-proBNP, proBNP and BNP) are used to diagnose heart failure but these are expensive to produce. We describe a rapid, cheap and facile production of proteins for immunoassays of heart failure. DNA encoding N-terminally His-tagged NT-proBNP and proBNP were cloned into the pJexpress404 vector. ProBNP and NT-proBNP peptides were expressed in Escherichia coli, purified and refolded in vitro. The analytical performance of these peptides were comparable with commercial analytes (NT-proBNP EC50 for the recombinant is 2.6 ng/ml and for the commercial material is 5.3 ng/ml) and the EC50 for recombinant and commercial proBNP, are 3.6 and 5.7 ng/ml respectively). Total yield of purified refolded NT-proBNP peptide was 1.75 mg/l and proBNP was 0.088 mg/l. This approach may also be useful in expressing other protein analytes for immunoassay applications. PURPOSE OF WORK: To develop a cost effective protein expression method in E. coli to obtain high yields of NT-proBNP (1.75 mg/l) and proBNP (0.088 mg/l) peptides for immunoassay use.

Driving Osteocytogenesis from Mesenchymal Stem Cells in Osteon-like Biomimetic Nanofibrous Scaffolds.

The treatment of critical-sized bone defects caused by tumor removal, skeletal injuries, or infections continues to pose a major clinical challenge. A popular potential alternative solution to autologous bone grafts is a tissue-engineered approach that utilizes the combination of mesenchymal stromal/stem cells (MSCs) with synthetic biomaterial scaffolds. This approach aims to support new bone formation by mimicking many of the biochemical and biophysical cues present within native bone. Regrettably, osteocyte cells, crucial for bone maturation and homeostasis, are rarely produced within MSC-seeded scaffolds, thereby restricting the development of fully mature cortical bone from these synthetic implants. In this work, we have constructed a multimodal scaffold by combining electrospun poly(lactic-co-glycolic acid) (PLGA) fibrous scaffolds with poly(ethylene glycol) (PEG)-based hydrogels that mimic the functional unit of cortical bone, osteon (osteon-mimetic) scaffolds. These scaffolds were decorated with a novel bone morphogenic protein-6 (BMP6) peptide (BMP6p) after our findings revealed that the BMP6p drives higher levels of Smad signaling than the full-length protein counterpart, soluble or when bound to the PEG hydrogel backbone. We show that our osteon-mimetic scaffolds, in presenting concentric layers of BMP6p-PEG hydrogel overlaid on MSC-seeded PLGA nanofibers, promoted the rapid formation of osteocyte-like cells with a phenotypic dendritic morphology, producing early osteocyte markers, including E11/gp38 (E11). Maturation of these osteocyte-like cells was further confirmed by the observation of significant dentin matrix protein 1 (DMP1) throughout our bilayered scaffolds after 3 weeks, even when cultured in a medium without dexamethasone (DEX) or any other osteogenic supplements. These results demonstrate that these osteon-mimetic scaffolds, in presenting biochemical and topographical cues reminiscent of the forming osteon, can drive the formation of osteocyte-like cells in vitro from hBMSCs without the need for any osteogenic factor media supplementation.

Transforming undergraduate laboratory courses with interlinked real-world challenges.

Undergraduate laboratory course components often provide training in various techniques without connections to an interlinked real-world scenario. This article emphasizes the benefits of longitudinal integration of research techniques to enhance learning and emphasize societal relevance. An example of a biomedical engineering challenge involving a new pandemic is described.

Exploring the cell interactome: deciphering relative impacts of cell-cell communication in cell co-culture using a novel microfluidic device.

The human body is made up of approximately 40 trillion cells in close contact, with the cellular density of individual tissues varying from 1 million to 1 billion cells per cubic centimetre. Interactions between different cell types (termed heterotypic) are thus common in vivo. Communication between cells can take the form of direct cell-cell contact mediated by plasma membrane proteins or through paracrine signalling mediated through the release, diffusion, and receipt of soluble factors. There is currently no systematic method to investigate the relative contributions of these mechanisms to cell behaviour. In this paper, we detail the conception, development and validation of a microfluidic device that allows cell-cell contact and paracrine signalling in defined areas and over a variety of biologically relevant length scales, referred to as the interactome-device or 'I-device'. Importantly, by intrinsic device design features, cells in different regions in the device are exposed to four different interaction types, including a) no heterotypic cell interaction, b) only paracrine signalling, c) only cell-cell direct contact, or d) both forms of interaction (paracrine and cell-cell direct contact) together. The device design was validated by both mathematical modelling and experiments. Perfused stem cell culture over the medium term and the formation of direct contact between cells in the culture chambers was confirmed. The I-device offers significant flexibility, being able to be applied to any combination of adherent cells to determine the relative contributions of different communication mechanisms to cellular outcomes.

Choroid plexus defects in Down syndrome brain organoids enhance neurotropism of SARS-CoV-2.

Why individuals with Down syndrome (DS) are more susceptible to SARS-CoV-2-induced neuropathology remains elusive. Choroid plexus (ChP) plays critical roles in barrier function and immune response modulation and expresses the ACE2 receptor and the chromosome 21-encoded TMPRSS2 protease, suggesting its substantial role in establishing SARS-CoV-2 infection in the brain. To explore this, we established brain organoids from DS and isogenic euploid iPSC that consist of a core of functional cortical neurons surrounded by a functional ChP-like epithelium (ChPCOs). DS-ChPCOs recapitulated abnormal DS cortical development and revealed defects in ciliogenesis and epithelial cell polarity in ChP-like epithelium. We then demonstrated that the ChP-like epithelium facilitates infection and replication of SARS-CoV-2 in cortical neurons and that this is increased in DS. Inhibiting TMPRSS2 and furin activity reduced viral replication in DS-ChPCOs to euploid levels. This model enables dissection of the role of ChP in neurotropic virus infection and euploid forebrain development and permits screening of therapeutics for SARS-CoV-2-induced neuropathogenesis.