Non-invasive analysis of bleaching effect of hydrogen peroxide on enamel by reflectance confocal microscopy (RCM): study of series of cases.

The aim of this study is to evaluate in vivo the effects of in-office tooth whitening hydrogen peroxide (HP) agent on enamel-microstructured surface by a reflectance confocal microscopy (RCM). Ten healthy volunteers assisted at the Dental School presenting teeth with vital pulp were selected. The 35% HP whiteness product was applied in two visits on discolored teeth, 1-week interval between, via 20-min applications. A commercially available hand-held RCM (Vivascope3000®, Lucid, Rochester, NY, USA) was used to image in vivo the dental surface of the selected tooth of each volunteer. Twenty upper central incisors' vestibular surfaces were imaged, before bleaching (T0), immediately after (T1) and 1 week later (T2). The peculiar structure of the enamel was seen at T0. After bleaching, white reflective circular bodies were found all over the teeth surfaces, which disappear 1 week later (T2). When the HP gel® was imaged, the same white circular areas were observed. Going deeper, the regular enamel architecture was preserved. Textural analysis of the images in T0 and T2 was performed: GLCM parameters were extracted. Mann-Whitney U test was performed to evaluate statistical differences between two groups of data (p > 0.05). Finally, 35 prisms were randomly selected from T0 and T2 image and diameters were measured; a paired t test was performed (p = 0.381). The RCM is a promisor tool for investigating the features of enamel in vivo, immediately after bleaching procedures, as well as longitudinally.

Human DPSCs fabricate vascularized woven bone tissue: a new tool in bone tissue engineering.

Human dental pulp stem cells (hDPSCs) are mesenchymal stem cells that have been successfully used in human bone tissue engineering. To establish whether these cells can lead to a bone tissue ready to be grafted, we checked DPSCs for their osteogenic and angiogenic differentiation capabilities with the specific aim of obtaining a new tool for bone transplantation. Therefore, hDPSCs were specifically selected from the stromal-vascular dental pulp fraction, using appropriate markers, and cultured. Growth curves, expression of bone-related markers, calcification and angiogenesis as well as an in vivo transplantation assay were performed. We found that hDPSCs proliferate, differentiate into osteoblasts and express high levels of angiogenic genes, such as vascular endothelial growth factor and platelet-derived growth factor A. Human DPSCs, after 40 days of culture, give rise to a 3D structure resembling a woven fibrous bone. These woven bone (WB) samples were analysed using classic histology and synchrotron-based, X-ray phase-contrast microtomography and holotomography. WB showed histological and attractive physical qualities of bone with few areas of mineralization and neovessels. Such WB, when transplanted into rats, was remodelled into vascularized bone tissue. Taken together, our data lead to the assumption that WB samples, fabricated by DPSCs, constitute a noteworthy tool and do not need the use of scaffolds, and therefore they are ready for customized regeneration.

Histone deacetylase inhibition with valproic acid downregulates osteocalcin gene expression in human dental pulp stem cells and osteoblasts: evidence for HDAC2 involvement.

Adult mesenchymal stem cells, such as dental pulp stem cells, are of great interest for cell-based tissue engineering strategies because they can differentiate into a variety of tissue-specific cells, above all, into osteoblasts. In recent years, epigenetic studies on stem cells have indicated that specific histone alterations and modifying enzymes play essential roles in cell differentiation. However, although several studies have reported that valproic acid (VPA)-a selective inhibitor of histone deacetylases (HDAC)-enhances osteoblast differentiation, data on osteocalcin expression-a late-stage marker of differentiation-are limited. We therefore decided to study the effect of VPA on dental pulp stem cell differentiation. A low concentration of VPA did not reduce cell viability, proliferation, or cell cycle profile. However, it was sufficient to significantly enhance matrix mineralization by increasing osteopontin and bone sialoprotein expression. In contrast, osteocalcin levels were decreased, an effect induced at the transcriptional level, and were strongly correlated with inhibition of HDAC2. In fact, HDAC2 silencing with shRNA produced a similar effect to that of VPA treatment on the expression of osteoblast-related markers. We conclude that VPA does not induce terminal differentiation of osteoblasts, but stimulates the generation of less mature cells. Moreover, specific suppression of an individual HDAC by RNA interference could enhance only a single aspect of osteoblast differentiation, and thus produce selective effects.

Cancer stem cells in solid tumors: an overview and new approaches for their isolation and characterization.

Primary tumors are responsible for 10% of cancer deaths. In most cases, the main cause of mortality is the formation of metastases. Accumulating evidence suggests that a subpopulation of tumor cells with distinct stem-like properties is responsible for tumor initiation, invasive growth, and metastasis formation. This population is defined as cancer stem cells (CSCs). Existing therapies have enhanced the length of survival after diagnosis of cancer but have completely failed in terms of recovery. CSCs appear to be resistant to chemotherapy, may remain quiescent for extended periods, and have affinity for hypoxic environments. The CSCs can be identified and isolated by different methodologies, including isolation by CSC-specific cell surface marker expression, detection of side population phenotype by Hoechst 33342 exclusion, assessment of their ability to grow as floating spheres, and aldehyde dehydrogenase (ALDH) activity assay. None of the methods mentioned are exclusively used to isolate the solid tumor CSCs, highlighting the imperative to delineate more specific markers or to use combinatorial markers and methodologies. This review provides an overview of the main characteristics and approaches used to identify, isolate, and characterize CSCs from solid tumors.

Human Ng2+ adipose stem cells loaded in vivo on a new crosslinked hyaluronic acid-Lys scaffold fabricate a skeletal muscle tissue.

Mesenchymal stem cell (MSC) therapy holds promise for treating diseases and tissue repair. Regeneration of skeletal muscle tissue that is lost during pathological muscle degeneration or after injuries is sustained by the production of new myofibers. Human Adipose stem cells (ASCs) have been reported to regenerate muscle fibers and reconstitute the pericytic cell pool after myogenic differentiation in vitro. Our aim was to evaluate the differentiation potential of constructs made from a new cross-linked hyaluronic acid (XHA) scaffold on which different sorted subpopulations of ASCs were loaded. Thirty days after engraftment in mice, we found that NG2(+) ASCs underwent a complete myogenic differentiation, fabricating a human skeletal muscle tissue, while NG2(-) ASCs merely formed a human adipose tissue. Myogenic differentiation was confirmed by the expression of MyoD, MF20, laminin, and lamin A/C by immunofluorescence and/or RT-PCR. In contrast, adipose differentiation was confirmed by the expression of adiponectin, Glut-4, and PPAR-γ. Both tissues formed expressed Class I HLA, confirming their human origin and excluding any contamination by murine cells. In conclusion, our study provides novel evidence that NG2(+) ASCs loaded on XHA scaffolds are able to fabricate a human skeletal muscle tissue in vivo without the need of a myogenic pre-differentiation step in vitro. We emphasize the translational significance of our findings for human skeletal muscle regeneration.

An ELISA Test Able to Predict the Development of Oral Cancer: The Significance of the Interplay between Steroid Receptors and the EGF Receptor for Early Diagnosis.

Oral disorders including non-homogeneous leukoplakia, erythroplakia, erosive lichen planus, and many others can potentially progress to oral squamous cell carcinoma (OSCC). Currently, the late diagnosis of OSCC contributes to high mortality rates, emphasizing the need for specific markers and early intervention. In this study, we present a novel, quick, sensitive, and non-invasive method for the early detection and screening of oral cancer, enabling the qualitative assessment of neoplastic forms even before the onset of symptoms. Our method directly examines the expression of oral cancer biomarkers, such as the epithelial growth factor receptor (EGFR), and steroid receptors, including the androgen receptor (AR) and the estrogen receptor (ER). The crosstalk between sexual hormones and the EGF receptor plays a crucial role in the progression of different types of cancers, including head and neck squamous cell carcinoma. To implement our method, we developed a kit box comprising nine wells or stations, each containing buffers, lysis systems, and dried/lyophilized antibodies stored at room temperature. The kit includes instruments for sample collection and a PVDF strip (Immobilon) with specific primary antibodies immobilized on it. These antibodies capture the target proteins from cytological samples. Additionally, complementary tools are provided to ensure efficient utilization and optimal test performance. The technique can be performed outside the laboratory, either "patient side" with an instant chemocolorimetric response or with a digital reader utilizing the enzyme-linked immunosorbent assay (ELISA) method.

Comparative study of the anaesthetic efficacy of 4% articaine versus 2% mepivacaine in mandibular third molar germectomy using different anaesthetic techniques: a split-mouth clinical trial.

BACKGROUND: Currently, one of the most discouraging aspects for many patients undergoing dental procedures is the administration of local anaesthesia. Therefore, there is a constant search for new techniques to avoid the invasive and painful nature of the injection. This study aimed to compare the clinical efficacy of local anaesthetics with articaine 4% or mepivacaine 2% (both with epinephrine 1:100.000), using different anaesthetic techniques to perform germectomy of lower third molars and to assess patients' feelings and pain during surgery. METHODS: Totally 50 patients (ranged 11-16 years) who required germectomy of mandibular third molars were recruited. Each patient received local anaesthesia on one side with articaine inoculated with plexus technique while on the other side with mepivacaine using inferior alveolar nerve block technique. The patients' evaluation was performed on pre and intraoperative tactile-pressure feelings and intraoperative pain with four levels on the Visual Analogue Scale (VAS). RESULTS: Surgical operations lasted less with more efficient analgesia when articaine was used. The additional intraosseous injection was required mainly in the mepivacaine group intraoperatively. A few patients had tactile-pressure feelings while intraoperative pain sensation was absent in 90% of cases with articaine. Significant differences were found in the cases who reported "absent" and "moderate" VAS values, favoring the use of articaine. CONCLUSIONS: Articaine injected with a plexus anaesthetic technique seems to be more clinically manageable than mepivacaine for the mandibular third molar germectomy. The discomfort of tactile-pressure feelings and pain experienced was lower using articaine anaesthetic technique used.

A new method for oral cancer biomarkers detection with a non-invasive cyto-salivary sampling and rapid-highly sensitive ELISA immunoassay: a pilot study in humans.

Introduction: Oral squamous cell carcinoma (OSCC) accounts for approximately 90% of oral malignancies and has a 5-year mortality rate close to 50%. A consistent part (70%) of all oral cancers is diagnosed at an advanced stage since available screening techniques are ineffective. Therefore, it would be urgent to improve them. The diagnostic gold standard is tissue biopsy with histological and immunohistochemical assessment. This method presents some limitations. Biopsy is invasive and the histopathological evaluation is semi-quantitative, and the absolute abundance of the target cannot be reliably determined. In addition, tissue is highly processed and may lead to loss of information of the natural state. The search for classical and new clinical biomarkers on fragments of tissue/cells collected with a cytobrush is a highly hopeful technique for early detection and diagnosis of OSCC, because of its non-invasive sampling and easy collection method. Methods: Here we analyzed cytobrush biopsies samples collected from the oral cavity of 15 patients with already diagnosed OSCC by applying an innovative high-sensitivity ELISA technique, in order to verify if this approach may provide useful information for detection, diagnosis, and prognosis of OSCC. To this end, we selected six biomarkers, already used in clinical practice for the diagnosis of OSCC (EGFR, Ki67, p53) or selected based on recent scientific and clinical data which indicate their presence or over-expression in cells undergoing transformation and their role as possible molecular targets in immunecheckpoints blockade therapies (PD-L1, HLA-E, B7-H6). Results: The selected tumor biomarkers were highly expressed in the tumor core, while were virtually negative in healthy tissue collected from the same patients. These differences were highly statistically significant and consistent with those obtained using the gold standard test clearly indicating that the proposed approach, i.e. analysis of biomarkers by a custom ELISA technique, is strongly reliable. Discussion: These preliminary data suggest that this non-invasive rapid phenotyping technique could be useful as a screening tool for phenotyping oral lesions and support clinical practice by precise indications on the characteristics of the lesion, also with a view to the application of new anti-tumor treatments, such as immunotherapy, aimed at OSCC patients.

Human primary bone sarcomas contain CD133+ cancer stem cells displaying high tumorigenicity in vivo.

This study aimed to identify, isolate, and characterize cancer stem cells from human primary sarcomas. We performed cytometric analyses for stemness and differentiation antigens, including CD29, CD34, CD44, CD90, CD117, and CD133, on 21 human primary sarcomas on the day of surgery. From sarcoma biopsies, we obtained 2 chondrosarcoma-stabilized cell lines and 2 osteosarcoma stabilized cell lines, on which sphere formation, side population profile, stemness gene expression, and in vivo and in vitro assays were performed. All samples expressed the CD133, CD44, and CD29 markers. Therefore, we selected a CD133(+) subpopulation from stabilized cell lines that displayed the capacity to grow as sarcospheres able to initiate and sustain tumor growth in nonobese diabetic/severe combined (NOD/SCID) mice, to express stemness genes, including OCT3/4, Nanog, Sox2, and Nestin, and to differentiate into mesenchymal lineages, such as osteoblasts and adipocytes. Our findings show the existence of cancer stem cells in human primary bone sarcomas and highlight CD133 as a pivotal marker for identification of these cells. This may be of primary importance in the development of new therapeutic strategies and new prognostic procedures against these highly aggressive and metastatic tumors.

Human neural crest-derived postnatal cells exhibit remarkable embryonic attributes either in vitro or in vivo.

During human embryonic development, odontogenic tissues, deriving from the neural crest, remain undifferentiated until the adult age. This study was aimed at characterising the cells of the follicle enveloping the dental germ, due to its direct origin from neural crests. Sixty dental follicles were collected from patients aged 18 to 45 years. This research has clarified that dental follicles, if extracted in a very early stage, when dental roots did not start to be formed, contain a lineage of cells, characterised by a high degree of plasticity in comparison with other adult stem cell populations. In particular, we found that these cells share the following features with ES: (i) high levels of embryonic stem cell markers (CD90, TRA1-60, TRA1-81, OCT-4, CD133, and SSEA-4); (ii) mRNA transcripts for Nanog and Rex-1; (iii) broader potency, being able to differentiate in cell types of all three germ layer, including smooth and skeletal muscle, osteoblasts, neurons, glial cells, and adipocytes; (iv) high levels of telomerase activity; (v) ability to form embryoid bodies; (vi) ability, after injection in murine blastocysts, to be localised within the inner cell mass; (vii) no teratoma formation after injection; (viii) in vivo tissue formation after transplantation. Our results demonstrate that these cells represent a very easy accessible and extraordinary source of pluripotent cells and point out the fact that they own the cardinal feature of embryonic stem cells.

Detection of SARS-COV-2 Proteins Using an ELISA Test.

The coronavirus disease 2019 (COVID-19) global pandemic created an unprecedented public health emergency. Early recognition of an infected person and disruption of the transmission pathway are the keys to controlling this major public health threat around the world. The scientifically reliable screening method is an RT-PCR test that is performed on an ororhinopharyngeal swab in the laboratory. In the current severe SARS-CoV-2 pandemic, it is necessary to identify devices for rapid diagnosis to reduce the spread of the disease. The aim of this study was to provide a qualitative, rapid, sensitive, and specific method for a diagnosis of SARS-CoV-2 infection based on the recognition of specific antigens of the SARS-CoV-2 virus. The device was built by assembling commercially available and custom-made semi-finished products. The method was performed in environments outside the laboratory, i.e., "patient side," with an immediate chemocolorimetric response or with a digital reader using an ELISA method.

Diagnostic Accuracy of a New Antigen Test for SARS-CoV-2 Detection.

BACKGROUND AND AIMS: Quick and reliable diagnostic tools play an important role in controlling the spread of the SARS-Cov-2 pandemic. The aim of this study was to evaluate the diagnostic accuracy of a new cyto-salivary antigen test aimed at detecting the presence of antigens for SARS-CoV-2, as compared by the gold standard RT-PCR and a lateral flow test. METHODS: A total of 433 healthy volunteers were enrolled in the study and the sensitivity and specificity of the new cyto-salivary antigen test were calculated, as compared to the RT-PCR nasopharyngeal swab and to the lateral flow test. RESULTS: A total of 433 samples were collected and tested at the Mediterranean Fair in Palermo from February 2021 until April 2021. The new cyto-salivary antigen had a sensitivity of 100% and a specificity of 94.2%. The sensitivity and the specificity of the lateral flow test were 55% and 100%, respectively. CONCLUSIONS: The new cyto-salivary antigen test detected more positive cases than the RT-PCR in a sample of asymptomatic subjects, demonstrating to be a promising tool for a more sensitive diagnosis of COVID-19. Further studies are warranted to better characterize its diagnostic accuracy.

Titanium Functionalized with Polylysine Homopolymers: In Vitro Enhancement of Cells Growth.

In oral implantology, the success and persistence of dental implants over time are guaranteed by the bone formation around the implant fixture and by the integrity of the peri-implant mucosa seal, which adheres to the abutment and becomes a barrier that hinders bacterial penetration and colonization close to the outer parts of the implant. Research is constantly engaged in looking for substances to coat the titanium surface that guarantees the formation and persistence of the peri-implant bone, as well as the integrity of the mucous perimeter surrounding the implant crown. The present study aimed to evaluate in vitro the effects of a titanium surface coated with polylysine homopolymers on the cell growth of dental pulp stem cells and keratinocytes to establish the potential clinical application. The results reported an increase in cell growth for both cellular types cultured with polylysine-coated titanium compared to cultures without titanium and those without coating. These preliminary data suggest the usefulness of polylysine coating not only for enhancing osteoinduction but also to speed the post-surgery mucosal healings, guarantee appropriate peri-implant epithelial seals, and protect the fixture against bacterial penetration, which is responsible for compromising the implant survival.

Human dental pulp stem cells: from biology to clinical applications.

Dental pulp stem cells (DPSCs) can be found within the "cell rich zone" of dental pulp. Their embryonic origin, from neural crests, explains their multipotency. Up to now, two groups have studied these cells extensively, albeit with different results. One group claims that these cells produce a "dentin-like tissue", whereas the other research group has demonstrated that these cells are capable of producing bone, both in vitro and in vivo. In addition, it has been reported that these cells can be easily cryopreserved and stored for long periods of time and still retain their multipotency and bone-producing capacity. Moreover, recent attention has been focused on tissue engineering and on the properties of these cells: several scaffolds have been used to promote 3-D tissue formation and studies have demonstrated that DPSCs show good adherence and bone tissue formation on microconcavity surface textures. In addition, adult bone tissue with good vascularization has been obtained in grafts. These results enforce the notion that DPSCs can be used successfully for tissue engineering.

Human mandible bone defect repair by the grafting of dental pulp stem/progenitor cells and collagen sponge biocomplexes.

In this study we used a biocomplex constructed from dental pulp stem/progenitor cells (DPCs) and a collagen sponge scaffold for oro-maxillo-facial (OMF) bone tissue repair in patients requiring extraction of their third molars. The experiments were carried out according to our Internal Ethical Committee Guidelines and written informed consent was obtained from the patients. The patients presented with bilateral bone reabsorption of the alveolar ridge distal to the second molar secondary to impaction of the third molar on the cortical alveolar lamina, producing a defect without walls, of at least 1.5 cm in height. This clinical condition does not permit spontaneous bone repair after extraction of the third molar, and eventually leads to loss also of the adjacent second molar. Maxillary third molars were extracted first for DPC isolation and expansion. The cells were then seeded onto a collagen sponge scaffold and the obtained biocomplex was used to fill in the injury site left by extraction of the mandibular third molars. Three months after autologous DPC grafting, alveolar bone of patients had optimal vertical repair and complete restoration of periodontal tissue back to the second molars, as assessed by clinical probing and X-rays. Histological observations clearly demonstrated the complete regeneration of bone at the injury site. Optimal bone regeneration was evident one year after grafting. This clinical study demonstrates that a DPC/collagen sponge biocomplex can completely restore human mandible bone defects and indicates that this cell population could be used for the repair and/or regeneration of tissues and organs.

A New Controlled-Release Material Containing Metronidazole and Doxycycline for the Treatment of Periodontal and Peri-Implant Diseases: Formulation and In Vitro Testing.

BACKGROUND: Several locally administered antimicrobials have been studied in the literature as adjunctive or primary treatments for periodontitis and peri-implantitis with conflicting results. OBJECTIVE: The aim of this study was twofold: (1) the formulation of a controlled-release material containing metronidazole and doxycycline; (2) an in vitro evaluation of its antibacterial properties against planktonic and biofilm species involved in periodontal and peri-implant diseases. METHODS: Doxycycline (10 mg/ml) and metronidazole (20 mg/ml) were incorporated into a hydroxyethylcellulose-polyvinylpyrrolidone-calcium polycarbophil gel. Three milliliters of gel were dialyzed against Dulbecco's phosphate-buffered saline for 13 days. Antibiotics release at 3, 7, 10, and 13 days was determined spectroscopically. The inhibitory activity of the experimental gel was tested against A. actinomycetemcomitans, S. sanguinis, P. micra, and E. corrodens with an agar diffusion test, an inactivation biofilm test, and a confocal laser scanning microscope study (CLSMS) for S. sanguinis up to 20 days. RESULTS: After 13 days, the released doxycycline was 9.7% (at 3 days = 1.2 mg; 7 days = 0.67 mg; 10 days = 0.76 mg; 13 days = 0.29 mg), while metronidazole was 67% (30 mg, 6.8 mg, 2.5 mg, and 0.9 mg at the same intervals). The agar diffusion test highlights that the formulated gel was active against tested microorganisms up to 312 h. Quantitative analysis of biofilm formation for all strains and CLSMS for S. sanguinis showed a high growth reduction up to 13 days. CONCLUSIONS: The in vitro efficacy of the newly formulated gel was confirmed both on planktonic species and on bacterial biofilm over a period of 13 days. The controlled-release gel containing metronidazole and doxycycline had an optimal final viscosity and mucoadhesive properties. It can be argued that its employment could be useful for the treatment of periodontal and peri-implant diseases, where conventional therapy seems not successful.

Comparative Analysis of the Chemical Composition and Microstructure Conformation Between Different Dental Implant Bone Drills.

BACKGROUND: Hardness is considered an important parameter for evaluating the clinical performance of dental implant bone drills. It is connected to the chemical composition, microstructure conformation and manufacture of the surgical drills. METHODS: Microstructure of five dental implant drills using scanning electronic microscopy (SEM) integrated with energy dispersive X-ray spectrometry. Vickers microhardness was measured using a CV 2000 microhardness tester with an indentation force of 500 g. RESULTS: Composition of the implant drills was typical of martensitic stainless steel (MSS). The drills contained 13%-17% of Cr; Mo, Si and Mn were present as minor ligands. The examined bone drills showed different external surface conformation and hardness in relation to the different industrial production processes. A rougher external surface and a higher hardness value are characteristics of the surgical bone drills produced by hot forming; the implant drills produced by machining showed mailing lines on their external surface and a lower hardness. CONCLUSIONS: Different compositions and treatments were used by the manufacturers to improve the hardness of the external layer of the dental implant drills making them prone to a diverse heat generation during the implant site preparation.

Scaffold's surface geometry significantly affects human stem cell bone tissue engineering.

In this study, we have observed dental pulp stem cells (SBP-DPSCs) performances on different scaffolds, such as PLGA 85:15, hydroxyapatite chips (HA) and titanium. Stem cells were challenged with each engineered surface, either in plane cultures or in a rotating apparatus, for a month. Gingival fibroblasts were used as controls. Results showed that stem cells exerted a different response, depending on the different type of textured surface: in fact, microconcavities significantly affected SBP-DPSC differentiation into osteoblasts, both temporally and quantitatively, with respect to the other textured surfaces. Actually, stem cells challenged with concave surfaces differentiated quicker and showed nuclear polarity, an index of secretion, cellular activity and matrix formation. Moreover, bone-specific proteins were significantly expressed and the obtained bone tissue was of significant thickness. Thus, cells cultured on the concave textured surface had better cell-scaffold interactions and were induced to secrete factors that, due to their autocrine effects, quickly lead to osteodifferentiation, bone tissue formation, and vascularization. The worst cell performance was obtained using convex surfaces, due to the scarce cell proliferation on to the scaffold and the poor matrix secretion. In conclusion, this study stresses that for a suitable and successful bone tissue reconstruction the surface texture is of paramount importance.

The most widespread desmosomal cadherin, desmoglein 2, is a novel target of caspase 3-mediated apoptotic machinery.

Apoptotic cells are known to regulate the ordered dismantling of intercellular contacts through caspase activity. Despite the important role of desmoglein (Dsg) 2 in epithelial cell-cell adhesion, the fate of this widespread desmosomal cadherin during apoptosis is yet poorly understood. Here, by means of pharmacological approaches, we investigated whether Dsg2 was targeted by caspases in HaCaT and HT-29 cell lines undergoing staurosporine (STS)-induced apoptosis. Results showed that STS induced a caspase-dependent form of cell-death in both keratinocytes (HaCaT) and enterocytes (HT-29), that associated with progressive depletion of Dsg2 from cell lysates. The proteolytic processing of full-length Dsg2 resulted in the appearance of a 70-kDa fragment which was released into the cytosol. Consistently, immunofluorescence studies revealed that Dsg2 staining was abolished from cell surface whereas the cytoplasmic region of Dsg2 did localize intracellularly. Plakoglobin (Pg) also underwent cleavage and detached from Dsg2. Apoptotic changes paralleled with progressive loss of intercellular adhesion strength. All these biochemical, morphological, and functional changes were regulated by caspase 3. Indeed, in the presence of the caspase 3-inhibitor z-DEVD-fmk, full-length Dsg2 protein levels were preserved, whereas the amount of the 70-kDa fragment was maintained on control levels. Furthermore, cells pretreated with z-DEVD-fmk retained the membrane labeling of Dsg2. Taken together, our data demonstrate that the apoptotic processing of Dsg2 is mediated by caspase 3 in epithelial cells.

Development of a new calcium sulphate-based composite using alginate and chemically modified chitosan for bone regeneration.

In this work we developed a novel calcium sulphate-based composite in which the hemihydrate calcium sulphate (CHS) can be encapsulated in a polymeric biodegradable and biocompatible matrix, in order to retain the structural integrity and decrease the bioresorption rate in bone regeneration applications. Two polymers were employed to realize this system: chitosan (Ch) and sodium alginate (Alg), both already widely used in biotechnological and biomedical applications. Chitosan was modified in order to obtain a water soluble polymer, the N-succinylchitosan (sCh). The reaction was performed with succinic anhydride in presence of pyridine and confirmed by FT-IR and NMR analyses. Finely ground Alg and sCh powders were mixed in different compositions with CHS and by adding water to the powder mixture it was obtained a mouldable paste that sets in few hours. Thermogravimetric analyses coupled with solvent extraction performed on the composite proved the alginate crosslinking in the presence of CHS. Mechanical studies carried out on composites of different compositions demonstrated that the blend of the two polymeric components causes a substantial synergistic reinforcement of composites. The presence of carboxylic groups on sCh chain in addition to those of alginate could enhance the chelating power of polysaccharide mixture. The results obtained with morphological analyses (SEM) further confirmed the hypotesis of the synergistic effect between alginate and N-succinylchitosan in presence of calcium sulphate. In vitro cytotoxicity tests proved that the developed system was not cytotoxic.