Extensively Porous-Coated Stems Demonstrate Excellent Long-Term Survivorship in Revision Total Hip Arthroplasty.

BACKGROUND: Extensively porous-coated cylindrical stems have demonstrated excellent results in revision total hip arthroplasties (THAs). However, most studies are midterm follow-ups and of modest cohort size. This study aimed to evaluate long-term outcomes of a large series of extensively porous-coated stems. METHODS: From 1992 to 2003, 925 extensively porous-coated stems were utilized in revision THAs at a single institution. The mean age was 65 years, and 57% of patients were males. Harris hip scores were calculated, and clinical outcomes were assessed. Radiographic assessment for stem fixation was categorized as either in-grown, fibrous stable, or loose according to Engh criteria. Risk analysis used Cox proportional hazard method. The mean follow-up was 13 years. RESULTS: Mean Harris hip scores improved from 56 to 80 at the last follow-up (P < .001). Fifty-three femoral stems (5%) were rerevised: 26 for aseptic loosening, 11 for stem fractures, 8 for infection, 5 for periprosthetic femoral fractures, and 3 for dislocation. Cumulative incidence of aseptic femoral loosening and femoral rerevision for any reason were 3% and 6.4% at 20 years, respectively. Nine of eleven stem fractures occurred with 10.5-13.5 mm diameters (mean 6 years). Radiographic review of unrevized stems demonstrated 94% bone-ingrown. Demographics, femoral bone loss, stem diameter, and length were not predictors of femoral rerevision. CONCLUSION: In this large series of revision THAs using a single extensively porous-coated stem design, the cumulative incidence of rerevision for aseptic femoral loosening was 3% at 20 years. These data confirm the durability of this stem in femoral revision, providing a long-term benchmark for newer uncemented revision stems. LEVEL OF EVIDENCE: Level IV, retrospective study.

Influence of kinematics of the lumbopelvic complex in hip arthroplasty dislocation: from assessment to recommendations.

INTRODUCTION: In total hip arthroplasty (THA), misplacement of the implant can provide instability. Adequate orientation of the acetabular cup is a challenge due to variations in inter-individual anatomy and kinematics of the pelvis in everyday life. The aim of this study was to characterize the kinematic factors influencing the risk of dislocation in order to give recommendations for optimal placement of the cup. We hypothesized that the lack of pelvic adaptation would influence the risk of prosthetic instability and motivate adapted. MATERIALS AND METHODS: Eighty patients with primary unilateral THA were included in a matched case-control study. Seventy-four patients were divided into two groups: group 1 (G1) consisting of patients with postoperative THA dislocation (37 patients) and group 2 (G2), without episodes of dislocation within two years postoperatively (37 patients). In both groups, spino-pelvic parameters and cup orientation were measured in standing and sitting positions with EOS® X-ray imaging and compared to each other between 12 and 24 months post-operatively. RESULTS: No significant difference between the two groups was found for static parameters. In a sitting position, a lack of pelvic retroversion with a significant lower variation in sacral slope was observed in group 1 (8.0° ± 9.3 for G1 versus 14.7° ± 6.2 for G2, p < 0.01). Twenty-two (59%) patients with THA instability had sacral slope variations of less than 10° versus eight (21% of patients) with stable THA (p < 0.01). Cup orientation in the Lewinnek safe zone was not significantly different (59% vs 67%, p = 0.62), and the spino-pelvic parameters and cup orientation measured did not change between the standing and sitting positions. However, only 14 (37%) cups in G1 were in the functional safe zone versus 24 (67%) in G2 (p = 0.03). CONCLUSION: Static parameters of the sagittal spinopelvic balance have a low predictive value for prosthetic instability. Dynamic analysis is essential. Kinematic parameters must be taken into account in determining the ideal position of the cup or stem. Stiffness with locked standing or sitting pelvis must be integrated in order to determine a personalized safe zone. LEVEL OF EVIDENCE: Level III (matched case-control study).

Bony asymmetry in patellofemoral morphology and risk factors of instability are mostly clinically negligible.

PURPOSE: Previous investigations suggested that femoral side-to-side differences were located in the upper femur anatomy. However, little is known about the asymmetry between distal femur and patella. The degree of bony asymmetry in the patellofemoral joint was evaluated using pairs of CT-scans with emphasis on morphometric measurements and risk factors relevant to patellofemoral disorders. METHODS: Patellofemoral morphometric parameters and anatomical risk factors were analyzed from 345 pairs of CT scans to evaluate side-to-side differences for each patient. All measurements were automatized using previously published algorithm-calculated bone landmarks. We analyzed asymmetry based on absolute differences (AD) and percentage asymmetry (AS%). Significant asymmetry was defined as AS% > 10%. RESULTS: Patellar height was found to be highly symmetric (mean AD 0.1 for both Insall-Salvatti and Caton-Deschamps methods, AS% 8% and 9%, respectively). Patellar and femoral morphometric parameters were found highly symmetric, except for the trochlear groove depth. Substantial asymmetry was reported in two patellofemoral risk factors: the lateral trochlear inclination (mean AD 2°, AS% 16%) and the tibial tuberosity-trochlear groove distance (1 mm, 116%). Patellar and femoral morphometric asymmetries were independent of demographics, including age, gender, height, weight and ethnicity. CONCLUSION: Patellar height was found to be highly symmetric and is, therefore, a reasonable index for contralateral templating. While very few patellofemoral morphometric parameters and anatomical risk factors were asymmetric, the mean differences were clinically negligible and independent of demographics. LEVEL OF EVIDENCE: III.

Renal Toxicity Associated With Resection and Spacer Insertion for Chronic Hip PJI.

BACKGROUND: Two-stage exchange arthroplasty with high-dose antibiotic-loaded bone cement spacer and intravenous (IV) antibiotics is the most common method of managing infected total hip arthroplasties. However, the contemporary incidence, risk factors, and outcomes of acute kidney injuries (AKIs) in this cohort are unknown. METHODS: We identified 227 patients treated with 256 antibiotic-loaded bone cement spacers after resection of an infected primary total hip arthroplasty between 2000 and 2017. Mean age was 65 years, mean body mass index was 30 mg/kg2, 55% were men, and 16% had pre-existing chronic kidney disease (CKD). Spacers were in situ for a mean of 15 weeks, concomitantly associated with IV or oral antibiotics for a mean of 6 weeks. AKI was defined as a creatinine ≥1.5X baseline or ≥0.3 mg/dL. Mean follow-up was 8 years. RESULTS: AKI occurred in 13 patients without pre-existing CKD (7%) vs 10 patients with CKD (28%; OR 5; P = .0001). None required acute dialysis. Postoperative fluid depletion (ß = 0.31; P = .0001), ICU requirement (ß = 0.40; P = .0001), and acute atrial fibrillation (ß = 0.43; P = .0001) were independent predictors for AKI in patients without pre-existing CKD. Duration of in situ spacer, mean antibiotic dose in cement, use of amphotericin B, and type of IV antibiotics were not significant risk factors. At last follow-up, 8 AKIs progressed to CKD, with one receiving dialysis 7 years later. CONCLUSION: AKIs occurred in 7% of patients with normal renal function, with 5-fold greater risk in those with CKD, and 4% did develop CKD. Importantly, causes of acute renal blood flow impairment were independent predictors for AKI. LEVEL OF EVIDENCE: Level III, comparative study.

Contemporary Mortality Rate and Outcomes in Nonagenarians Undergoing Primary Total Hip Arthroplasty.

BACKGROUND: Nonagenarians (90-99 years) have experienced the fastest percent growth in primary THA utilization recently. However, there are limited data on this population. This study aimed to determine the mortality rate, implant survivorship, clinical outcomes, and complications of primary THAs in nonagenarians. METHODS: Our institutional total joint registry was used to identify 144 nonagenarians who underwent 149 primary THAs for osteoarthritis only between 1997 and 2017. The mean age was 92 years, with 63% being female. Mortality, revision, and reoperation were assessed using cumulative incidence with death as a competing risk and Cox regression methods. Clinical outcomes were assessed using Harris hip scores (HHSs). Cemented femoral components were used in 68%. The mean follow-up was 4 years. RESULTS: The mortality rates were 6%, 8%, 14%, and 49% at 90 days, 1 year, 2 years, and 5 years, respectively. The 5-year cumulative incidences of any revision and reoperation were 1% and 4%, respectively. The mean HHS improved significantly from 48 preoperatively to 76 at 5 years (P < .001). The 5-year cumulative incidence of any complication was 69%, with the most common being periprosthetic femur fracture (7) intraoperatively, delirium (25) early postoperatively, and periprosthetic femur fracture (10) later postoperatively. Uncemented stem fixation was associated with a higher risk for intraoperative femur fracture (Hazard ratio 5, P = .04) but not with a higher 5-year periprosthetic postoperative femur fracture risk (P = .19). CONCLUSION: Nonagenarians undergoing primary THA had substantial mortality rates at 90 days (6%) and 1 year (8%). While the cumulative incidence of any revision and reoperations were low at 5 years, the high complication rate is mostly due to periprosthetic fractures. LEVEL OF EVIDENCE: Level IV, retrospective cohort.

Contemporary Mortality Rate and Outcomes in Nonagenarians After Primary Total Knee Arthroplasty.

BACKGROUND: Nonagenarians (90-99 years) have experienced the fastest percent growth in primary total knee arthroplasty (TKA) utilization recently. However, there are limited data on the results of the procedure in this population. The goals of this study are to determine the mortality rate, implant survivorship, clinical outcomes, and complications of primary TKAs in nonagenarians. METHODS: Our institutional total joint registry was used to identify 105 nonagenarians who underwent 119 primary cemented TKAs for osteoarthritis between 1997 and 2017. Mean age was 92 years, with 58% being female. Mortality, revision, and reoperation were assessed using cumulative incidence with death as a competing risk and Cox regression methods. Clinical outcomes were assessed using Knee Society Scores. A posterior-stabilized design was used in 88%. Mean follow-up was 4 years. RESULTS: The mortality rates were 0%, 2%, 9%, and 47% at 90 days, 1 year, 2 years, and 5 years, respectively. The 5-year cumulative incidences of any revision and reoperation were 0% and 3%, respectively. The reoperations included 2 internal fixations for periprosthetic fracture and 1 hardware removal. The mean Knee Society Score improved significantly from 34 preoperatively to 80 at 5 years (P < .001). The 5-year cumulative incidence of any nonmortality complication was 66%. The most common complications were urinary tract infections and retention (8%) in the early postoperative period, and acquired idiopathic stiffness (10%) later. CONCLUSION: Nonagenarians undergoing primary TKA had low mortality rates at 90 days (0%) and 1 year (2%) with substantial functional improvements. The cumulative incidences of revision and reoperation were low at 5 years. LEVEL OF EVIDENCE: Level IV, retrospective cohort.

Lower donor-site morbidity using QT autografts for ACL reconstruction.

PURPOSE: Comparing scar cosmesis and regional hypoesthesia at the incision site between quadriceps tendon (QT), bone-patellar tendon-bone (BPTB), and hamstring tendon (HT) for anterior cruciate ligament (ACL) reconstruction. METHODS: Ninety patients undergoing ACL reconstruction with QT, HT or BPTB were evaluated at 1-year post-op. Scar cosmesis was assessed using the patient and observer scar assessment scale (POSAS) and length of the incision. Sensory outcome was analyzed by calculating the area of hypoesthesia around the scar. The classical ACL reconstruction functional follow-up was measured using the Lysholm score and KOOS. RESULTS: Concerning QT versus BPTB group, QT patients have a significantly lower mean POSAS (24.8 ± 6.3 vs. 39.6 ± 5.8; p < 0.0001), shorter mean incision (2.8 ± 0.4 cm vs. 6.4 ± 1.3 cm; p < 0.0001), lower extent of hypoesthesia (8.7 ± 5.1 cm2 vs. 88.2 ± 57 cm2; p < 0.0001), and better Lysholm score (90.1 ± 10.1 vs. 82.6 ± 13.5; n.s.). No significant difference was seen in KOOS (90.7 ± 7.2 vs. 88.4 ± 7.0; n.s.). Concerning QT versus HT group, no significant difference was found regarding mean POSAS score (24.8 ± 6.3 vs. 31.8 ± 6.2; n.s.), mean length of the incision (2.8 ± 0.4 cm vs. 2.5 ± 0.6 cm; n.s.), KOOS (90.7 ± 7.2 vs. 89.8 ± 8.2; n.s.) and mean Lysholm score (90.1 ± 10.1 vs. 87.8 ± 0.6; n.s.). The mean measured area of hypoesthesia was significantly higher in the HT group (70.3 ± 77.1 cm2 vs. 8.7 ± 5.1 cm2; p < 0.0001). CONCLUSION: Quadriceps tendon harvesting technique has the safest incision by causing less sensory loss compared to BPTB and HT. It also has the advantage of a short incision with more cosmetic scar compared to BPTB, with no difference compared to HT. However, no significant difference in terms of functional outcome was shown between the three autografts. These findings provide surgeons evidence about their clinical practice and help with graft choice decisions. LEVEL OF EVIDENCE: III.

Contralateral preoperative templating of lower limbs' mechanical angles is a reasonable option.

PURPOSE: In cases where the femur or tibia exhibits abnormal mechanical angulation due to degenerative changes or fracture, the contralateral leg is often used to complete preoperative templating. The aim of this study was to determine the degree of asymmetry between knee joints in healthy individuals and to determine whether it is affected by differing demographic parameters. METHODS: A CT scan-based modelling and analysis system was used to examine the lower limb of 233 patients (102 males, 131 women; mean age 61.2 ± 15.2 years, mean body mass index 24.9 ± 4.4 kg/m2) The hip-knee angle (HKA), lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), posterior proximal tibial angle (ppta) and posterior distal femoral angle (PDFA) were then calculated for each patient. Results were then analysed to calculate femoral symmetry based on absolute differences (AD) and percentage asymmetry (%AS) using a previously validated method. RESULTS: Our results do not demonstrate any considerable asymmetry (percentage of asymmetry > 2%) for all the anatomical parameters analysed: HKA (mean AD = 1.5°; mean AS % = 0.8, n.s), MPTA (AD = 1.1°; AS % = 1.3, n.s), PPTA (AD = 1.4°; AS % = 1.0, n.s), LDFA (AD = 1.2 mm; AS % = 1.4, n.s) and PDFA (AD = 0.9°; AS % = 1.0, n.s). Gender and ethnicity were not associated with significantly higher AD asymmetry. A significant correlation of AD asymmetry was observed between BMI and HKA, BMI and MPTA, and between patients' age and the MPTA. CONCLUSION: This data demonstrate that there is a non-statistically significant mechanical angle asymmetry between the two lower limbs. In cases where contralateral templating is used, such asymmetry will induce minimal (if any) clinical differences. LEVEL OF EVIDENCE: IV.

Human Fibrosis: Is There Evidence for a Genetic Predisposition in Musculoskeletal Tissues?

BACKGROUND: Pathologic fibrosis is characterized by dysregulation of gene expression with excessive extracellular matrix production. The genetic basis for solid organ fibrosis is well described in the literature. However, there is a paucity of evidence for similar processes in the musculoskeletal (MSK) system. The purpose of this review is to provide an overview of existing evidence of genetic predisposition to pathologic fibrosis in the cardiac, pulmonary, and MSK systems, and to describe common genetic variants associated with these processes. METHODS: A comprehensive search of several databases from 2000 to 2019 was conducted using relevant keywords in the English language. Genes reported as involved in idiopathic fibrotic processes in the heart, lung, hand, shoulder, and knee were recorded by 2 independent authors. RESULTS: Among 2373 eligible studies, 52 studies investigated genetic predisposition in terms of variant analysis with the following organ system distribution: 36 pulmonary studies (69%), 15 hand studies (29%), and 1 knee study (2%). Twenty-two percent of gene variants identified were associated with both pulmonary and MSK fibrosis (ie, ADAM, HLA, CARD, EIF, TGF, WNT, and ZNF genes). Genetic variants known to be involved in the MSK tissue development or contractility properties in muscle were identified in the pulmonary fibrosis. CONCLUSION: Despite shared genetic variations in both the lung and hand, there remains limited information about genetic variants associated with fibrosis in other MSK regions. This finding establishes the necessity of further studies to elucidate the genetic determinants involved in the knee, shoulder, and other joint fibrotic pathways. LEVEL OF EVIDENCE: Level III.

Cementless revision femoral stems application of press-fit principles and clinical outcomes.

BACKGROUND: Cementless femoral stems are currently used in revision total hip arthroplasty (THA) with the surgeon choosing between various fixation modes. The outcomes are good in the medium term; however, some failures have been attributed to technical errors during implantation. When the decision has been made to use a press-fit implant, the impact of the surgeon's technique on the functional outcomes have not been explored in-depth. This led us to carry out a retrospective study on a large population of total hip arthroplasty patients which aims were achieved press-fit to (1) determine the impact of the type of primary fixation (with and without press-fit) on the functional outcomes; (2) specify the effect of stem length on the functional scores when diaphyseal press-fit is achieved and (3) analyse the main reasons why a true press-fit effect was not achieved (three-point fixation). HYPOTHESIS: There is a relationship between the primary fixation method by press-fit of a revision femoral stem and the functional outcomes. PATIENTS AND METHODS: We performed a retrospective analysis of a continuous cohort of 244 THA revision cases with a mean follow-up of 6.1 ± 3.5 years (range, 2-18). The femoral area in which close contact was achieved (shared interface between the bone and implant) was used to define various types of press-fit fixation. The functional outcomes were determined using the Harris Hip Score (HHS) and the Merle d'AubignéPostel score (MAP score) out of 12 points (pain and walking items). RESULTS: The post-operative HHS averaged 90.83 ± 7.51 for proximal press-fit and 80.14 ± 14.93 with no press-fit (p = 0.01). The MAP averaged 10.83 ± 1.03 for proximal press-fit and 9.75 ± 2.09 with no press-fit (p = 0.09). The MAP score was worse for long diaphyseal press-fit than for short press-fit (p = 0.02). Use of a long stem with an endofemoral route or an overly small femoral window in patients with a curved femur is the main reason that three-point fixation occurred instead of press-fit. CONCLUSIONS: While press-fit is an effective concept, it is a demanding one that requires the surgeon to choose the correct surgical strategy for the patient's anatomy. A meticulous surgical technique is required to achieve proximal press-fit or at a minimum, short diaphyseal press-fit.

Reliability of hindfoot alignment measurements from standard radiographs using the methods of Meary and Saltzman.

BACKGROUND: Few methods have been described for measuring hindfoot alignment from an anteroposterior view. The objective of this study was to compare two methods of angular measurement based on the views of Meary and Saltzman. METHODS: Thirty asymptomatic volunteers were included. Four radiographs were performed: the views of Meary and Saltzman with parallel feet and with the Fick correction. The reproducibility was determined by the inter- and intraobserver variability (ICC). RESULTS: Meary's method revealed a mean valgus angulation of 3.9° (SD 3.47°). The reliability was extremely variable with a mean ICC of 0.59. The best reproducibility was obtained with Meary's method with and without Fick correction. CONCLUSION: The results of this study show that the reliability of the angular measurements depends on the radiographic view and measurement method chosen. The lateral Fick correction did not counteract the influence of tibial rotation. The same method should be used consistently.

Nerve stress during reverse total shoulder arthroplasty: a cadaveric study.

BACKGROUND: Neurologic lesions are relatively common after total shoulder arthroplasty. These injuries are mostly due to traction. We aimed to identify the arm manipulations and steps during reverse total shoulder arthroplasty (RTSA) that affect nerve stress. METHODS: Stress was measured in 10 shoulders of 5 cadavers by use of a tensiometer on each nerve from the brachial plexus, with shoulders in different arm positions and during different surgical steps of RTSA. RESULTS: When we studied shoulder position without prostheses, relative to the neutral position, internal rotation increased stress on the radial and axillary nerves and external rotation increased stress on the musculocutaneous, median, and ulnar nerves. Extension was correlated with increase in stress on all nerves. Abduction was correlated with increase in stress for the radial nerve. We identified 2 high-risk steps during RTSA: humeral exposition, particularly when the shoulder was in a position of more extension, and glenoid exposition. The thickness of polyethylene humeral cups used was associated with increased nerve stress in all but the ulnar nerve. CONCLUSION: During humeral preparation, the surgeon must be careful to limit shoulder extension. Care must be taken during exposure of the glenoid. Extreme rotation and oversized implants should be avoided to minimize stretch-induced neuropathies.

Composite reverse shoulder arthroplasty can provide good function and quality of life in cases of malignant tumour of the proximal humerus.

PURPOSE: Management of proximal humeral tumours remains a surgical challenge. No study to date has assessed the quality of life scores following the composite reverse shoulder arthroplasty for this indication. We, therefore, evaluated function and quality of life following reconstruction with allograft for malignant tumour of the humerus. METHODS: A series of six cases of humeral tumour treated by a single surgeon in a single centre was reviewed after a mean follow-up of 5.9 years. The tumours included two chondrosarcomas, one plasmocytoma and three metastases. Resection involved bone epiphysis, metaphysis and diaphysis in five cases (S3S4S5A) and epiphysis and metaphysis in one case (S3S4A). For reconstruction, an allograft composite reverse shoulder arthroplasty was used in all the cases. Outcomes were assessed with range of motion, the QuickDash score and the Short Form 12 (SF-12) Health Survey. Radiographs assessed osseointegration and complications. RESULTS: At the final follow-up, the mean shoulder range of motion were respectively 95°, 57° and 11° for forward flexion, abduction and external rotation. Mean QuickDASH score improved from 28 to 41 and VAS-pain scores improved from 5.1 to 2.3. The post-operative MSTS score was 73% and the Constant score was 46.1/100. The SF-12 PCS and MCS scores were also improved, respectively from 44.4 and 39.7 to 45.5 and 56.1. The mean satisfaction score was 8.1/10. CONCLUSIONS: Composite reverse shoulder arthroplasty is a viable alternative for reconstruction after resection of malignant humeral tumour. Although total tumour resection was the most important objective, the functional and quality of life scores were satisfactory.

Maisonneuve Equivalent Injury With Proximal Tibiofibular Joint Dislocation: Case Report and Literature Review.

We report the case of a 31-year-old male who presented with traumatic dislocation of both proximal and distal tibiofibular joints without fibular fracture. The patient underwent closed reduction of the proximal tibiofibular joint and surgical stabilization of the distal tibiofibular joint. An 18-month postoperative evaluation confirmed a very good clinical outcome after anatomic reduction. This type of trauma is very rare and, to our knowledge, has only been described 3 times previously. Furthermore, our surgical management was different from that used for the previous cases and proved to be satisfactory.

Finite element analysis in the optimization of posterior-stabilized total knee arthroplasty.

Posterior-stabilized total knee arthroplasty (PS-TKA) is associated with high rates of satisfaction and functional recovery. This is notably attributed to implant optimization in terms of design, choice of materials, positioning and understanding of biomechanics. Finite elements analysis (FEA) is an assessment technique that contributed to this optimization by ensuring mechanical results based on numerical simulation. By close teamwork between surgeons, researchers and engineers, FEA enabled testing of certain clinical impressions. However, the methodological features of the technique led to wide variations in the presentation and interpretation of results, requiring a certain understanding of numerical and biomechanical fields by the orthopedic community. The present study provides an up-to-date review, aiming to address the following questions: what are the principles of FEA? What is the role of FEA in studying PS design in TKA? What are the key elements in the literature for understanding the role of FEA in PS-TKA? What is the contribution of FEA for understanding of tibiofemoral and patellofemoral biomechanical behavior? What are the limitations and perspectives of digital simulation and FEA in routine practice, with a particular emphasis on the "digital twin" concept? LEVEL OF EVIDENCE: V, expert opinion.

Plantar compartment block for hallux valgus surgery: a proof-of-concept anatomic and clinical study.

BACKGROUND: Hallux valgus surgery is associated with moderate to severe postoperative pain. We hypothesized that a plantar compartment block may be a good technique for postoperative analgesia. We describe an anatomic approach to ultrasound-guided plantar compartment block and assess the clinical efficacy of the block for outpatient surgery. METHODS: The anatomic study was aimed to describe the plantar compartment, using both dissection methods and imaging, and to define a volume of local anesthetic. Patients scheduled for hallux valgus surgery with a popliteal sciatic nerve block, and combined plantar compartment and peroneal blocks were included in the clinical study. Data on attaining the criteria for rapid exit from the outpatient center, duration of sensory and analgesic block, visual analog scale (VAS) values for postoperative pain at rest and during movement, and the consumption of morphine as rescue analgesia were recorded. RESULTS: Plane-by-plane dissections and cross-sections were done in five cadaveric lower limbs. The medial calcaneal nerve divides into medial plantar and lateral plantar nerves in the upper part of the plantar compartment. These nerves were surrounded by 5 mL of colored gelatin, and 10 mL of injectates dye spread to the medial calcaneal branches. Thirty patients (26 women) were included in the clinical study. There were no failures of surgical block. Ninety per cent of patients successfully passed functional testing for ambulatory exit from the center within 5 hours (25th-75th centiles, 3.8-5.5 hours). The median duration of plantar compartment sensory block was 17.3 hours (10.5-21.5 hours), and the first request for rescue analgesic was 11.75 hours (10.5-23 hours) after surgery. The median VAS score for maximum pain reported within the 48-hour period was 2 (1-6). Twelve patients received 2.5 mg (0-5 mg) of morphine on day 1. Patients were highly satisfied and no adverse events were noted. CONCLUSIONS: This anatomic description of the ultrasound-guided plantar compartment block reported the injection area to target the medial and lateral plantar nerves with 5 mL of local anesthetic. Normal walking without assistance is attained rapidly with this regional anesthesia technique, and the time to request postoperative analgesia after hallux valgus surgery is long. TRIAL REGISTRATION NUMBER: NCT03815422.

Midfoot Tarsectomy in Cavovarus: Why PSI Makes a Difference?

The cavovarus foot is a complex deformity that can be treated using multiple surgical procedures, ranging from soft tissue surgery to triple arthrodesis. Among these options, anterior midfoot tarsectomy is a three-dimensional closed-wedge osteotomy, traditionally performed slowly and progressively in a blind fashion, and remaining a challenge for unexperimented surgeons with variable outcomes. As such, we investigated and discussed the use of patient-specific cutting guides (PSCGs) in computer-assisted anterior midfoot tarsectomy in terms of accuracy, reproducibility, and safety.

Combined structural allograft and tantalum cone to manage segmental metaphyseal tibial bone defect in revision knee arthroplasty.

Tibial bone defect remains a challenge in revision knee arthroplasty. The present innovative technique combines structural allograft and tantalum metaphyseal cone for treatment of AORI stage 2A and 2B (uncontained peripheral metaphyseal) tibial defect. The aim is to reconstitute bone stock and enhance allograft osseointegration, while limiting stress to the allograft by implanting the metaphyseal cone through the allograft and the original bone. LEVEL OF EVIDENCE: V (expert opinion).

Three-dimensional biometrics using weight-bearing imaging shows relationship between knee and hindfoot axial alignment.

BACKGROUND: Existence of a relationship between knee and hindfoot alignments is commonly accepted, but not clearly proven. While studied in the coronal plane using 2D imaging, axial alignment has not been studied yet, likely requiring 3D measurements. We aimed to investigate how knee and hindfoot rotational alignments are related using 3D biometrics and modern 3D weight-bearing technologies. HYPOTHESIS: Hindfoot alignment is correlated with femoral and tibial torsions. PATIENTS AND METHODS: All patients who underwent both weight-bearing CT (WBCT) and low dose biplanar radiographs (LDBR) were selected in this retrospective observational study, resulting in a cohort of 157 lower limbs from 99 patients. Patients' pathologies were stratified in subgroups and those with a history of trauma or surgery affecting lower limb alignment were excluded. Foot Ankle Offset was calculated from WBCT; femoral and tibial torsions and coronal alignment were calculated from LDBR, respectively. RESULTS: Overall, mean Foot Ankle Offset was 1.56% (SD 7.4), mean femoral anteversion was 15.6° (SD 9.5), and mean external tibial torsion was 32.6° (SD 7.6). Moderate negative correlation between Tibial Torsion and Foot Ankle Offset was found in the whole series (rho=-0.23, p=0.003) and for non-pathologic patients (rho=-0.27, p=0.01). Linear models to estimate Tibial Torsion with Foot Ankle Offset and conversely were found, with a low adjusted R2 (3%