Proline 235 plays a key role in the regulation of the oligomeric states of Thermotoga maritima Arginine Binding Protein.

The Arginine Binding Protein isolated from Thermotoga maritima (TmArgBP) is a protein endowed with several peculiar properties. We have previously shown that TmArgBP dimerization is a consequence of the swapping of the C-terminal helix. Here we explored the structural determinants of TmArgBP domain swapping and oligomerization. In particular, we report a mutational analysis of the residue Pro235, which is located in the hinge region of the swapping dimer. This residue was either replaced with a Gly-Lys dipeptide (TmArgBP(P235GK)) or a Gly residue (TmArgBP(P235G)). Different forms of these mutants were generated and extensively characterized using biophysical techniques. For both TmArgBP(P235GK) and TmArgBP(P235G) mutants, the occurrence of multiple oligomerization states (monomers, dimers and trimers) was detected. The formation of well-folded monomeric forms for these mutants indicates that the dimerization through C-terminal domain swapping observed in wild-type TmArgBP is driven by conformational restraints imposed by the presence of Pro235 in the hinge region. Molecular dynamics studies corroborate this observation by showing that Gly235 assumes conformational states forbidden for Pro residues in the TmArgBP(P235G) monomer. Unexpectedly, the trimeric forms present: (a) peculiar circular dichroism spectra, (b) a great susceptibility to heating, and (c) the ability to bind the Thioflavin T dye. The present findings clearly demonstrate that single-point mutations have an important impact on the TmArgBP oligomerization process. In a wider context, they also indicate that proteins endowed with an intrinsic propensity to swap have an easy access to states with altered structural and, possibly, functional properties.

Engineering a switch-based biosensor for arginine using a Thermotoga maritima periplasmic binding protein.

The Thermotoga maritima arginine-binding protein (TmArgBP) has been modified to create a reagentless fluorescent protein biosensor. Two design methods for biosensor construction are compared: 1) solvent accessibility of environmentally-sensitive probes and 2) fluorescence deactivation due to photo-induced electron transfer (PET). Nine single cysteine TmArgBP mutants were created and labeled with three different environmentally sensitive fluorescent probes. These mutants demonstrated limited changes in fluorescence emission upon the addition of arginine. In contrast, the PET-based biosensor provides significant enhancements over the traditional approach and provides a fluorescence quenching mechanism that was capable of providing quantitative detection of arginine. Site-directed mutagenesis of TmArgBP was used to create attachment points for the fluorescent probe (K145C) and for an internal aromatic residue (D18X) to serve as the PET quencher. Both tyrosine and tryptophan, but not phenylalanine, were able to quench the emission of the fluorescent probe by more than 80% upon the addition of arginine. The dissociation constant for arginine ranged from 0.87 to 1.5 µM across the different sensors. This PET-based strategy provides a simple and broadly applicable approach for the analytical detection of small molecules that may be applied to any protein that exhibits conformational switching in a ligand dependent manner.

The Nitrogenous Hamigerans: Unusual Amino Acid-Derivatized Aromatic Diterpenoid Metabolites from the New Zealand Marine Sponge Hamigera tarangaensis.

The NMR-directed isolation and structure elucidation of nine new nitrogenous hamigeran diterpenoids from the New Zealand marine sponge Hamigera tarangaensis are described. Featured in this set are the oxazole-containing hamigeran M (4) and eight compounds (5a-6a and 7a-8c) related to the constitutional structure of hamigeran D (1). Moderate cytotoxicity in the low-micromolar range against the HL-60 promyeloid leukemic cell line is reported for seven of the new compounds. The structural nature of these compounds suggests that their adducts are derived from an amino acid source and has allowed for revision of the configuration about C-18 of the archetypal compound, hamigeran D, from 1a to 1b. The existence of three constitutionally identical forms of hamigeran Q (8a-8c) requires the involvement of an allo-isoleucine stereoisomer and suggests the intriguing possibility of partial prokaryotic biogenesis of these unusual secondary metabolites.

Structurally diverse hamigerans from the New Zealand marine sponge Hamigera tarangaensis: NMR-directed isolation, structure elucidation and antifungal activity.

The NMR-directed investigation of the New Zealand marine sponge Hamigera tarangaensis has afforded ten new compounds of the hamigeran family, and a new 13-epi-verrucosane congener. Notably, hamigeran F (6) possesses an unusual carbon­carbon bond between C-12 and C-13, creating an unprecedented skeleton within this class. In particular, the structural features of 6, hamigeran H (10) and hamigeran J (12) imply a diterpenoid origin, which has allowed the putative biogenesis of three hamigeran carbon skeletons to be proposed based on geranyl geranyl pyrophosphate. All new hamigerans exhibited micromolar activity towards the HL-60 promyelocytic leukaemic cell line, and hamigeran G also selectively displayed antifungal activity in the budding yeast Saccharomyces cerevisiae. Homozygous deletion profiling (HOP) analysis suggests Golgi apparatus function as a potential target of this unusual class of sponge-derived terpenoids.

Crystallization and preliminary X-ray crystallographic analysis of ligand-free and arginine-bound forms of Thermotoga maritima arginine-binding protein.

The arginine-binding protein from Thermotoga maritima (TmArgBP) is an arginine-binding component of the ATP-binding cassette (ABC) transport system in this hyperthermophilic bacterium. This protein is endowed with an extraordinary stability towards thermal and chemical denaturation. Its structural characterization may provide useful insights for the clarification of structure-stability relationships and for the design of new biosensors. Crystallization trials were set up for both arginine-bound and ligand-free forms of TmArgBP and crystals suitable for crystallographic investigations were obtained for both forms. Ordered crystals of the arginine adduct of TmArgBP could only be obtained by using the detergent LDAO as an additive to the crystallization medium. These crystals were hexagonal, with unit-cell parameters a = 78.2, c = 434.7 Å, and diffracted to 2.7 Å resolution. The crystals of the ligand-free form were orthorhombic, with unit-cell parameters a = 51.8, b = 91.9, c = 117.9 Å, and diffracted to 2.25 Å resolution.

Distance dependence of electron transfer kinetics for azurin protein adsorbed to monolayer protected nanoparticle film assemblies.

The distance dependence and kinetics of the heterogeneous electron transfer (ET) reaction for the redox protein azurin adsorbed to an electrode modified with a gold nanoparticle film are investigated using cyclic voltammetry. The nanoparticle films are comprised of nonaqueous nanoparticles, known as monolayer-protected clusters (MPCs), which are covalently networked with dithiol linkers. The MPC film assembly serves as an alternative adsorption platform to the traditional alkanethiolate self-assembled monolayer (SAM) modified electrodes that are commonly employed to study the ET kinetics of immobilized redox proteins, a strategy known as protein monolayer electrochemistry. Voltammetric analysis of the ET kinetics for azurin adsorbed to SAMs of increasing chain length results in quasi-reversible voltammetry with significant peak splitting. We observed rate constants (k degrees (ET)) of 12-20 s(-1) for the protein at SAMs of shorter alkanethiolates that decays exponentially (beta = 0.9/CH(2) or 0.8/A) at SAMs of longer alkanethiolates (9-11 methylene units) or an estimated distance of 1.23 nm and is representative of classical electronic tunneling behavior over increasing distance. Azurin adsorbed to the MPC film platforms of increasing thickness results in reversible voltammetry with very little voltammetric peaks splitting and nearly negligible decay of the ET rate over significant distances up to 20 nm. The apparent lack of distance dependence for heterogeneous ET reactions at MPC film assemblies is attributed to a two-step mechanism involving extremely fast electronic hopping through the MPC film architecture. These results suggest that MPC platforms may be used in protein monolayer electrochemistry to create adsorption platforms of higher architecture that can accommodate greater than monolayer protein coverage and increase the Faradaic signal, a finding with significant implications for amperometric biosensor design and development.

PEGylation of a maltose biosensor promotes enhanced signal response when immobilized in a silica sol-gel.

A robust method to immobilize a maltose biosensor is described using an engineered maltose periplasmic binding protein (PBP) covalently coupled to NBDamide, an environmentally sensitive fluorophore. A mesoporous silica sol-gel derived from diglycerylsilane (DGS) was constructed to embed the maltose biosensor, and the ligand reporting fluorescence properties were measured. When sequestered in the DGS-derived silica matrix, the biosensor retained maltose-dependent fluorescence sensing capability with micromolar affinity, which is consistent with the protein free in solution. The MBP-NBD conjugate was further modified by covalent conjugation with poly(ethylene glycol)-5000 (PEG) to promote the retention of water molecules around the protein and to reduce possible steric effects between the silica matrix and protein. Bioconjugation with PEG molecules does not significantly affect the signaling response of the protein in solution. When immobilized in the DGS polymer, a consistent increase in fluorescence intensity was observed as compared to the protein not functionalized with PEG. To our knowledge, this report presents the first successful method to embed a PBP biosensor in a polymerized matrix and retain signaling response using an environmentally sensitive probe. The immobilization method presented here should be easily adaptable to all conformation-dependent biosensors.

Analysis of ligand binding to a ribose biosensor using site-directed mutagenesis and fluorescence spectroscopy.

Computational design of proteins with altered ligand specificity is an emerging method for the creation of new biosensing systems. In this work, we investigated the outcome of site-directed mutagenesis on the Escherichia coli ribose binding protein (RBP), which is frequently used as a design scaffold for computational searches. A ribose biosensor was first constructed whereby an environmentally sensitive fluorescent probe was covalently attached to RBP at position S265C. This protein conjugate displayed a 54% decrease in emission intensity upon the addition of saturating ribose concentrations and exhibited an apparent dissociation constant (K(d) ) of 3.4 microM. Site-directed mutants within the RBP binding pocket were created and examined for ribose binding ability and overall structural stability. Because as many as 12 mutations are needed to alter ligand specificity in RBP, we measured the effect of single and multiple alanine mutations on stability and signal transduction potential of the ribose biosensor. Single alanine mutations had significant impact on both stability and signaling. Mutations of N190A and F214A each produced melting temperatures >8 degrees C below those observed for the wild-type protein. Residue Q235, located in the hinge region of RBP, appeared to be a hot spot for global protein stability as well. Additional single alanine mutations demonstrated as much as 200-fold increase in apparent K(d) but retained overall protein stability. The data collected from this study may be incorporated into design algorithms to help create more stable biosensors and optimize signal transduction properties for a variety of important analytes.

Analysis of allosteric signal transduction mechanisms in an engineered fluorescent maltose biosensor.

We previously reported the construction of a family of reagentless fluorescent biosensor proteins by the structure-based design of conjugation sites for a single, environmentally sensitive small molecule dye, thus providing a mechanism for the transduction of ligand-induced conformational changes into a macroscopic fluorescence observable. Here we investigate the microscopic mechanisms that may be responsible for the macroscopic fluorescent changes in such Fluorescent Allosteric Signal Transduction (FAST) proteins. As case studies, we selected three individual cysteine mutations (F92C, D95C, and S233C) of Escherichia coli maltose binding protein (MBP) covalently labeled with a single small molecule fluorescent probe, N-((2-iodoacetoxy)ethyl)-N-methyl)amino-7-nitrobenz-2-oxa-1,3-diazole (NBD), each giving rise to a robust FAST protein with a distinct maltose-dependent fluorescence response. The fluorescence emission intensity, anisotropy, lifetime, and iodide-dependent fluorescence quenching were determined for each conjugate in the presence and absence of maltose. Structure-derived solvent accessible surface areas of the three FAST proteins are consistent with experimentally observed quenching data. The D95C protein exhibits the largest fluorescence change upon maltose binding. This mutant was selected for further characterization, and residues surrounding the fluorophore coupling site were mutagenized. Analysis of the resulting mutant FAST proteins suggests that specific hydrogen-bonding interactions between the fluorophore molecule and two tyrosine side-chains, Tyr171 and Tyr176, in the open state but not the closed, are responsible for the dramatic fluorescence response of this construct. Taken together these results provide insights that can be used in future design cycles to construct fluorescent biosensors that optimize signaling by engineering specific hydrogen bonds between a fluorophore and protein.

Intensity measurements in scattering media.

We describe a new method which allows quantitative measurements of fluorescence intensity in highly scattering media. The measurement principle is based on observing the emission from both the fluorophore of interest with a nanosecond decay time and of a reference fluorophore which displays a much longer microsecond lifetime. The reference fluorophore is placed on rather than in the sample to mimic a sensing device with the long lifetime reference held against the skin. The amplitude modulation of the emission is observed using the standard method of frequency-domain (FD) fluorometry. At an intermediate modulation frequency, the modulation is equivalent to the fractional intensity of the nanosecond fluorophore. The method was tested in 0.5% intralipid, which is more highly scattering than skin. Quantitative intensity measurements were obtained for various concentrations of fluorescein in intralipid, and of the pH sensor 6-carboxyfluorescein (6-CF). Low frequency modulation measurements provide a general method for quantitative measurements in the presence of factors which preclude direct intensity measurements.

A loose domain swapping organization confers a remarkable stability to the dimeric structure of the arginine binding protein from Thermotoga maritima.

The arginine binding protein from Thermatoga maritima (TmArgBP), a substrate binding protein (SBP) involved in the ABC system of solute transport, presents a number of remarkable properties. These include an extraordinary stability to temperature and chemical denaturants and the tendency to form multimeric structures, an uncommon feature among SBPs involved in solute transport. Here we report a biophysical and structural characterization of the TmArgBP dimer. Our data indicate that the dimer of the protein is endowed with a remarkable stability since its full dissociation requires high temperature as well as SDS and urea at high concentrations. In order to elucidate the atomic level structural properties of this intriguing protein, we determined the crystallographic structures of the apo and the arginine-bound forms of TmArgBP using MAD and SAD methods, respectively. The comparison of the liganded and unliganded models demonstrates that TmArgBP tertiary structure undergoes a very large structural re-organization upon arginine binding. This transition follows the Venus Fly-trap mechanism, although the entity of the re-organization observed in TmArgBP is larger than that observed in homologous proteins. Intriguingly, TmArgBP dimerizes through the swapping of the C-terminal helix. This dimer is stabilized exclusively by the interactions established by the swapping helix. Therefore, the TmArgBP dimer combines a high level of stability and conformational freedom. The structure of the TmArgBP dimer represents an uncommon example of large tertiary structure variations amplified at quaternary structure level by domain swapping. Although the biological relevance of the dimer needs further assessments, molecular modelling suggests that the two TmArgBP subunits may simultaneously interact with two distinct ABC transporters. Moreover, the present protein structures provide some clues about the determinants of the extraordinary stability of the biomolecule. The availability of an accurate 3D model represents a powerful tool for the design of new TmArgBP suited for biotechnological applications.

Multi-technique quantitative analysis and socioeconomic considerations of lead, cadmium, and arsenic in children's toys and toy jewelry.

A wide spectrum and large number of children's toys and toy jewelry items were purchased from both bargain and retail vendors and analyzed for arsenic, cadmium, and lead metal content using multiple analytical techniques, including flame and furnace atomic absorption spectroscopy as well as X-ray fluorescence spectroscopy. Particularly dangerous for young children, metal concentrations in toys/toy jewelry were assessed for compliance with current Consumer Safety Product Commission (CPSC) regulations (F963-11). A conservative metric involving multiple analytical techniques was used to categorize compliance: one technique confirmation of metal in excess of CPSC limits indicated a "suspect" item while confirmation on two different techniques warranted a non-compliant designation. Sample matrix-based standard addition provided additional confirmation of non-compliant and suspect products. Results suggest that origin of purchase, rather than cost, is a significant factor in the risk assessment of these materials with 57% of toys/toy jewelry items from bargain stores non-compliant or suspect compared to only 15% from retail outlets and 13% if only low cost items from the retail stores are compared. While jewelry was found to be the most problematic product (73% of non-compliant/suspect samples), lead (45%) and arsenic (76%) were the most dominant toxins found in non-compliant/suspect samples. Using the greater Richmond area as a model, the discrepancy between bargain and retail children's products, along with growing numbers of bargain stores in low-income and urban areas, exemplifies an emerging socioeconomic public health issue.

Tryptophan-scanning mutagenesis of the ligand binding pocket in Thermotoga maritima arginine-binding protein.

The Thermotoga maritima arginine binding protein (TmArgBP) is a member of the periplasmic binding protein superfamily. As a highly thermostable protein, TmArgBP has been investigated for the potential to serve as a protein scaffold for the development of fluorescent protein biosensors. To establish a relationship between structural dynamics and ligand binding capabilities, we constructed single tryptophan mutants to probe the arginine binding pocket. Trp residues placed around the binding pocket reveal a strong dependence on fluorescence emission of the protein with arginine for all but one of the mutants. Using these data, we calculated dissociation constants of 1.9-3.3 µM for arginine. Stern-Volmer quenching analysis demonstrated that the protein undergoes a large conformational change upon ligand binding, which is a common feature of this protein superfamily. While still active at room temperature, time-resolved intensity and anisotropy decay data suggest that the protein exists as a highly rigid structure under these conditions. Interestingly, TmArgBP exists as a dimer at room temperature in both the presence and absence of arginine, as determined by asymmetric flow field flow fractionation (AF4) and supported by native gel-electrophoresis and time-resolved anisotropy. Our data on dynamics and stability will contribute to our understanding of hyperthermophilic proteins and their potential biotechnological applications.

Amino acid transport in thermophiles: characterization of an arginine-binding protein in Thermotoga maritima.

Members of the periplasmic binding protein superfamily are involved in the selective passage of ligands through bacterial cell membranes. The hyperthermophilic eubacterium Thermotoga maritima was found to encode a highly stable and specific periplasmic arginine-binding protein (TM0593). Following signal sequence removal and overexpression in Escherichia coli, TM0593 was purified by thermoprecipitation and affinity chromatography. The ultra-stable protein with a monomeric molecular weight of 27.7 kDa was found to exist as both a homodimer and homotrimer at appreciable concentrations even under strongly denaturing conditions, with an estimated transition temperature of 116 degrees C. Its multimeric structure may provide further evidence of the importance of quaternary structure in the movement of nutrients across bacterial membranes. Purified and refolded TM0593 was further characterized by fluorescence spectroscopy, mass spectrometry, and circular dichroism to demonstrate the specificity of the protein for arginine and to elucidate structural changes associated with arginine binding. The protein binds arginine with a dissociation constant of 20 muM as determined by surface plasmon resonance measurements. Due to its high thermodynamic stability, TM0593 may serve as a scaffold for the creation of a robust fluorescent biosensor.

Electrochemical analysis of azurin thermodynamic and adsorption properties at monolayer-protected cluster film assemblies - evidence for a more homogeneous adsorption interface.

Thermodynamic and adsorption properties of protein monolayer electrochemistry (PME) are examined for Pseudomonas aeruginosa azurin (AZ) immobilized at an electrode modified with a networked film of monolayer-protected clusters (MPCs) to assess if nanoparticle films of this nature offer a more homogeneous adsorption interface compared to traditional self-assembled monolayer (SAM) modified electrodes. Specifically, electrochemistry is used to assess properties of surface coverage, formal potential, peak broadening, and electron transfer (ET) kinetics as a function of film thickness. The modification of a surface with dithiol-linked films of MPCs (Au(225)C6(75)) provides a more uniform binding interface for AZ that results in voltammetry with less peak broadening (<110mV) compared to SAMs (>120-130mV). Improved homogeneity of the MPC interface for protein adsorption is confirmed by atomic force microscopy imaging that shows uniform coverage of the gold substrate topography and by electrochemical analysis of film properties during systematic desorption of AZ, which indicates a more homogeneous population of adsorbed protein at MPC films. These results suggest MPC film assemblies may be used in PME to provide greater molecular level control of the protein adsorption interface, a development with applications for strategies to study biological ET processes as well as the advancement of biosensor technologies.

Amino acid transport in thermophiles: characterization of an arginine-binding protein in Thermotoga maritima. 2. Molecular organization and structural stability.

ABC transport systems provide selective passage of metabolites across cell membranes and typically require the presence of a soluble binding protein with high specificity to a specific ligand. In addition to their primary role in nutrient gathering, the binding proteins associated with bacterial transport systems have been studied for their potential to serve as design scaffolds for the development of fluorescent protein biosensors. In this work, we used Fourier transform infrared spectroscopy and molecular dynamics simulations to investigate the physicochemical properties of a hyperthermophilic binding protein from Thermotoga maritima. We demonstrated preferential binding for the polar amino acid arginine and experimentally monitored the significant stabilization achieved upon binding of ligand to protein. The effect of temperature, pH, and detergent was also studied to provide a more complete picture of the protein dynamics. A protein structure model was obtained and molecular dynamic experiments were performed to investigate and couple the spectroscopic observations with specific secondary structural elements. The data determined the presence of a buried beta-sheet providing significant stability to the protein under all conditions investigated. The specific amino acid residues responsible for arginine binding were also identified. Our data on dynamics and stability will contribute to our understanding of bacterial binding protein family members and their potential biotechnological applications.

Construction of a reagentless glucose biosensor using molecular exciton luminescence.

Fluorescent protein biosensors, which exhibit a significant change in fluorescence based on the physical interaction between protein and ligand, may prove to be effective tools to measure a variety of analytes. In particular, real-time monitoring of glucose levels has potential applications in bioprocess monitoring and in minimizing health complications caused by diabetes. In this work, site-directed mutagenesis of the Escherichia coli glucose/galactose binding protein (GGBP) was used to engineer double-cysteine mutations that allowed selective covalent attachment of thiol-reactive dyes. Because GGBP undergoes a large conformational change on the addition of glucose, rational placement of these sites allowed glucose-dependent spatial realignment of the two fluorophores, which was monitored as a change in fluorescence intensity and extinction coefficients. Using targeted mutagenesis of the GGBP binding pocket, glucose biosensors were created to measure concentrations spanning five orders of magnitude (0.04-12,000 microM). The glucose biosensor retained its function in complex solutions that contained realistic concentrations of protein and potential interfering agents found in blood serum. In addition to the development of a fluorescent protein sensor for glucose, this work helps to expand the spectroscopic tools used for the detection of conformational movements within a single polypeptide chain.

Polarization-Based Sensing with a Self-Referenced Sample.

We describe a new method of fluorescence sensing based on fluorescence polarization. The sensor consists of two compartments, both of which contain the sensing fluorophore. One side of the sensor contains a constant concentration of analyte, and the other contains the unknown concentration. Emission from both sides is observed through polarizers, with the polarization from the sample being rotated 90° from that of the reference. Changes in the fluorescence intensity of the sample result in changes in the measured polarization for the combined emission. We show that this approach can be used to measure glucose and calcium using fluorophores which show analyte-dependent intensity changes, and no change in the spectral shape. Only a single fluorophore is required, this being the sensing fluorophore in both sides of the sensor. We also show that polarization sensing of glucose and calcium can be performed with visual detection of the polarization. In this case the only electronic component is the light source. These simple schemes can be used with a variety of analytes. The only requirement is a change in fluorescence intensity in response to the analyte.

UreR, the transcriptional activator of the Proteus mirabilis urease gene cluster, is required for urease activity and virulence in experimental urinary tract infections.

Proteus mirabilis, a cause of complicated urinary tract infection, produces urease, an essential virulence factor for this species. UreR, a member of the AraC/XylS family of transcriptional regulators, positively activates expression of the ure gene cluster in the presence of urea. To specifically evaluate the contribution of UreR to urease activity and virulence in the urinary tract, a ureR mutation was introduced into P. mirabilis HI4320 by homologous recombination. The isogenic ureR::aphA mutant, deficient in UreR production, lacked measurable urease activity. Expression was not detected in the UreR-deficient strain by Western blotting with monoclonal antibodies raised against UreD. Urease activity and UreD expression were restored by complementation of the mutant strain with ureR expressed from a low-copy-number plasmid. Virulence was assessed by transurethral cochallenge of CBA mice with wild-type and mutant strains. The isogenic ureR::aphA mutant of HI4320 was outcompeted in the urine (P = 0.004), bladder (P = 0.016), and kidneys (P < or = 0.001) 7 days after inoculation. Thus, UreR is required for basal urease activity in the absence of urea, for induction of urease by urea, and for virulence of P. mirabilis in the urinary tract.