The three classes of hydrogenases from sulfate-reducing bacteria of the genus Desulfovibrio.

Three types of hydrogenases have been isolated from the sulfate-reducing bacteria of the genus Desulfovibrio. They differ in their subunit and metal compositions, physico-chemical characteristics, amino acid sequences, immunological reactivities, gene structures and their catalytic properties. Broadly, the hydrogenases can be considered as 'iron only' hydrogenases and nickel-containing hydrogenases. The iron-sulfur-containing hydrogenase ([Fe] hydrogenase) contains two ferredoxin-type (4Fe-4S) clusters and an atypical iron-sulfur center believed to be involved in the activation of H2. The [Fe] hydrogenase has the highest specific activity in the evolution and consumption of hydrogen and in the proton-deuterium exchange reaction and this enzyme is the most sensitive to CO and NO2-. It is not present in all species of Desulfovibrio. The nickel-(iron-sulfur)-containing hydrogenases [( NiFe] hydrogenases) possess two (4Fe-4S) centers and one (3Fe-xS) cluster in addition to nickel and have been found in all species of Desulfovibrio so far investigated. The redox active nickel is ligated by at least two cysteinyl thiolate residues and the [NiFe] hydrogenases are particularly resistant to inhibitors such as CO and NO2-. The genes encoding the large and small subunits of a periplasmic and a membrane-bound species of the [NiFe] hydrogenase have been cloned in Escherichia (E.) coli and sequenced. Their derived amino acid sequences exhibit a high degree of homology (70%); however, they show no obvious metal-binding sites or homology with the derived amino acid sequence of the [Fe] hydrogenase. The third class is represented by the nickel-(iron-sulfur)-selenium-containing hydrogenases [( NiFe-Se] hydrogenases) which contain nickel and selenium in equimolecular amounts plus (4Fe-4S) centers and are only found in some species of Desulfovibrio. The genes encoding the large and small subunits of the periplasmic hydrogenase from Desulfovibrio (D.) baculatus (DSM 1743) have been cloned in E. coli and sequenced. The derived amino acid sequence exhibits homology (40%) with the sequence of the [NiFe] hydrogenase and the carboxy-terminus of the gene for the large subunit contains a codon (TGA) for selenocysteine in a position homologous to a codon (TGC) for cysteine in the large subunit of the [NiFe] hydrogenase. EXAFS and EPR studies with the 77Se-enriched D. baculatus hydrogenase indicate that selenium is a ligand to nickel and suggest that the redox active nickel is ligated by at least two cysteinyl thiolate and one selenocysteine selenolate residues.(ABSTRACT TRUNCATED AT 400 WORDS)

Biochemical and biophysical studies on cytochrome c oxidase. XX. Reaction with sulphide.

1. Upon addition of sulphide to oxidized cytochrome c oxidase, a low-spin heme sulphide compound is formed with an EPR signal at gx = 2.54, gy = 2.23 and gz = 1.87. Concomitantly with the formation of this signal the EPR-detectable low-spin heme signal at g = 3 and the copper signal near g = 2 decrease in intensity, pointing to a partial reduction of the enzyme by sulphide. 2. The addition of sulphide to cytochrome c oxidase, previously reduced in the presence of azide or cyanide, brings about a disappearance of the azido-cytochrome c oxidase signal at gx = 2.9, gy = 2.2, and gz = 1.67 and a decrease of the signal at g = 3.6 of cyano-cytochrome c oxidase. Concomitantly the sulphide-induced EPR signal is formed. 3. These observations demonstrate that azide, cyanide and sulphide are competitive for an oxidized binding site on cytochrome c oxidase. Moreover, it is shown that the affinity of cyanide and sulphide for this site is greater than that of azide.

Isolation and characterization of two rubredoxins from Clostridium thermoaceticum.

Two rubredoxins with similar molecular weights (about 6000) have been purified from Clostridium thermoaceticum, a thermophile and strict anaerobe. They exhibit minor differences in several properties like elution pattern from DEAE-cellulose column, isoelectric point, amino acid composition, absorption and EPR spectra and redox potential. Their chemical and physical properties are similar to those of other rubredoxins from anaerobic microorganisms.

Purification and characterization of bisulfite reductase (desulfofuscidin) from Desulfovibrio thermophilus and its complexes with exogenous ligands.

A dissimilatory bisulfite reductase has been purified from a thermophilic sulfate-reducing bacterium Desulfovibrio thermophilus (DSM 1276) and studied by EPR and optical spectroscopic techniques. The visible spectrum of the purified bisulfite reductase exhibits absorption maxima at 578.5, 392.5 and 281 nm with a weak band around 700 nm. Photoreduction of the native enzyme causes a decrease in absorption at 578.5 nm and a concomitant increase in absorption at 607 nm. When reduced, the enzyme reacts with cyanide, sulfite, sulfide and carbon monoxide to give stable complexes. The EPR spectrum of the native D. thermophilus bisulfite reductase shows the presence of a high-spin ferric signal with g values at 7.26, 4.78 and 1.92. Upon photoreduction the high-spin ferric heme signal disappeared and a typical 'g = 1.94' signal of [4Fe-4S] type cluster appeared. Chemical analyses show that the enzyme contains four sirohemes and eight [4Fe-4S] centers per mol of protein. The molecular mass determined by gel filtration was found to be 175 kDa. On SDS-gel electrophoresis the enzyme presents a main band of 44 to 48 kDa. These results suggest that the bisulfite reductase contains probably one siroheme and two [4Fe-4S] centers per monomer. The dissimilatory bisulfite reductase from D. thermophilus presents some homologous properties with desulfofuscidin, the bisulfite reductase isolated from Thermodesulfobacterium commune (Hatchikian, E.C. and Zeikus, J.G. (1983) J. Bacteriol. 153, 1211-1220).

Isolation of succinate dehydrogenase from Desulfobulbus elongatus, a propionate oxidizing, sulfate reducing bacterium.

Succinate dehydrogenase was purified from the particulate fraction of Desulfobulbus. The enzyme catalyzed both fumarate reduction and succinate oxidation but the rate of fumarate reduction was 8-times less than that of succinate oxidation. Quantitative analysis showed the presence of 1 mol of covalently bound flavin and 1 mol of cytochrome b per mol of succinate dehydrogenase. The enzyme contained three subunits with molecular mass 68.5, 27.5 and 22 kDa. EPR spectroscopy indicated the presence of at least two iron sulfur clusters. 2-Heptyl-4-hydroxy-quinoline-N-oxide inhibited the electron-transfer between succinate dehydrogenase and a high redox potential cytochrome c3 from Desulfobulbus elongatus.

The relationship between activity and the axial g = 2.06 EPR signal induced by CO in the periplasmic (Fe) hydrogenase from Desulfovibrio vulgaris.

The effect of exposure to carbon monoxide on the activity of the (Fe) hydrogenase from Desulfovibrio vulgaris has been determined. Concentrations of carbon monoxide which completely inhibit hydrogenase activity and induce formation of the axial g = 2.06 EPR signal up to 0.8 spin/molecule do not cause irreversible inhibition of the (Fe) hydrogenase.

Comparative EPR studies on the nitrite reductases from Escherichia coli and Wolinella succinogenes.

Hexaheme nitrite reductases purified to homogeneity from Escherichia coli K-12 and Wolinella succinogenes were studied by low-temperature EPR spectroscopy. In their isolated states, the two enzymes revealed nearly identical EPR spectra when measured at 12 K. Both high-spin and low-spin ferric heme EPR resonances with g values of 9.7, 3.7, 2.9, 2.3 and 1.5 were observed. These signals disappeared upon reduction by dithionite. Reaction of reduced enzyme with nitrite resulted in the formation of ferrous heme-NO complexes with distinct EPR spectral characteristics. The heme-NO complexes formed with the two enzymes differed, however, in g values and line-shapes. When reacted with hydroxylamine, reduced enzymes also showed the formation of ferrous heme-NO complexes. These results suggested the involvement of an enzyme-bound NO intermediate during the six-electron reduction of nitrite to ammonia catalyzed by these two hexaheme nitrite reductases. Heme proteins that can either expose bound NO to reduction or release it are significant components of both assimilatory and dissimilatory metabolisms of nitrate. The different ferrous heme-NO complexes detected for the two enzymes indicated, nevertheless, their subtle variation in heme reactivity during the reduction reaction.

Oxidation-reduction potentials of the hemes in cytochrome C3 from Desulfovibrio gigas in the presence and absence of ferredoxin by EPR spectroscopy.

1. Ferricytochrome c3 from D. gigas exhibits two low-spin ferric heme EPR resonances with gz-values at 2.959 and 2.853. Ferrocytochrome c3 is diamagnetic based on the absence of any EPR signals. 2. EPR potentiometric titrations result in the resolution of the two low-spin ferric heme resonances into two additional heme components representing in total the four hemes of the cytochrome, with EM values of -235 mV and -315 mV at heme resonance I and EM values of -235 mV and -306 mV at heme resonance II. 3. EPR spectroscopy has detected a significant diminution of intensity (approx. 60 p. 100) in the gx amplitude of ferricytochrome c3 in the presence of D. gigas ferredoxin II. The presence of ferredoxin II also causes a more negative shift in the EM of the second components of the signals at heme resonances I and II of cytochrome C3. Both observations suggest that an interaction has occurred between cytochrome C3 and ferredoxin II. 4. The results presented suggest that the heme ligand environment of ferricytochrome c3 from D. gigas is less perturbed and/or less asymmetric than environment for ferricytochrome c3 from D. vulgaris whose EPR behavior indicates the non-equivalence of all four hemes.

EPR determination of the oxidation-reduction potentials of the hemes in cytochrome c3 from Desulfovibrio vulgaris.

EPR spectroscopy in conjunction with oxidation-reduction potentiometry has been used to determine the half-reduction potentials of the four hemes of cytochrome c3. As predicted, the four hemes of cytochrome c3 have different mid-point potentials. The Em values are: Heme I,--284 mV; Heme II,--310 mV; Heme III,--324 mV and Heme IV,--319 mV. The n-values in each case was near one.

Studies of activating and nonactivating metal ion binding to yeast enolase.

Measurements of binding of certain divalent cations to yeast apoenolase were made using a pH-meter, chromatography, a divalent cation electrode, and ultrafiltration. The binding of the activating metal ions Mg2+ and Co2+ and the nonactivator Ca2+ were studied as functions of the presence or absence of substrate/product, phosphate, and fluoride or level of Tb3+. The data suggest phosphate and fluoride increase Mg2+ binding but not Ca2+ binding. Substrate/product appears to increase Ca2+ binding as well as that of Mg2+ and Co2+. In the presence of substrate, Co2+ binding was 5-6 mol/mol dimer. In the absence of substrate/product, Tb3+ reduced Co2+ binding from 4 mol/mol to 2. These data are interpreted in terms of binding to "conformational," "catalytic" (substrate/product dependent), and "inhibitory" sites. Measurements of Tb3+ fluorescence quenching by Co2+ suggested that the distance between "conformational" sites on the two subunits was large, while the distance between "conformational" and "inhibitory" sites was ca. 17 +/- 4 A. Potentiometric titrations of apoenzyme with Ca2+ and Mg2+ showed that the metal ions produced the same proton release in the presence or absence of substrate/product. If phosphate and fluoride were present, then more protons were released if Ca2+ was the titrant rather than Mg2+, suggesting a difference in ionization state in the complex with the activating metal. Electron paramagnetic resonance studies of Co2+ binding to the various sites in the enzyme are presented. The Co2+ bound to all three sites appears to be high spin, consistent with a preponderance of oxyligands in an octahedral environment. Substrate, citrate, and a strongly binding substrate analogue strongly enhance the hyperfine structure of conformational Co2+. This is interpreted as the result of a change in interaction of an axial ligand to conformational Co2+ produced by carbon-3 of substrate or analogue.