RESUMEN
The additive manufacturing of photopolymer resins by means of vat photopolymerization enables the rapid fabrication of bespoke 3D-printed parts. Advances in methodology have continually improved resolution and manufacturing speed, yet both the process design and resin technology have remained largely consistent since its inception in the 1980s1. Liquid resin formulations, which are composed of reactive monomers and/or oligomers containing (meth)acrylates and epoxides, rapidly photopolymerize to create crosslinked polymer networks on exposure to a light stimulus in the presence of a photoinitiator2. These resin components are mostly obtained from petroleum feedstocks, although recent progress has been made through the derivatization of renewable biomass3-6 and the introduction of hydrolytically degradable bonds7-9. However, the resulting materials are still akin to conventional crosslinked rubbers and thermosets, thus limiting the recyclability of printed parts. At present, no existing photopolymer resin can be depolymerized and directly re-used in a circular, closed-loop pathway. Here we describe a photopolymer resin platform derived entirely from renewable lipoates that can be 3D-printed into high-resolution parts, efficiently deconstructed and subsequently reprinted in a circular manner. Previous inefficiencies with methods using internal dynamic covalent bonds10-17 to recycle and reprint 3D-printed photopolymers are resolved by exchanging conventional (meth)acrylates for dynamic cyclic disulfide species in lipoates. The lipoate resin platform is highly modular, whereby the composition and network architecture can be tuned to access printed materials with varied thermal and mechanical properties that are comparable to several commercial acrylic resins.
RESUMEN
The vast majority of commodity plastics do not degrade and therefore they permanently pollute the environment. At present, less than 20% of post-consumer plastic waste in developed countries is recycled, predominately for energy recovery or repurposing as lower-value materials by mechanical recycling. Chemical recycling offers an opportunity to revert plastics back to monomers for repolymerization to virgin materials without altering the properties of the material or the economic value of the polymer. For plastic waste that is either cost prohibitive or infeasible to mechanically or chemically recycle, the nascent field of chemical upcycling promises to use chemical or engineering approaches to place plastic waste at the beginning of a new value chain. Here state-of-the-art methods are highlighted for upcycling plastic waste into value-added performance materials, fine chemicals and specialty polymers. By identifying common conceptual approaches, we critically discuss how the advantages and challenges of each approach contribute to the goal of realizing a sustainable plastics economy.
RESUMEN
The decoration of 2D nanostructures using heteroepitaxial growth is of great importance to achieve functional assemblies employed in biomedical, electrical, and mechanical applications. Although the functionalization of polymers before self-assembly has been investigated, the exploration of direct surface modification in the third dimension from 2D nanostructures has, to date, been unexplored. Here, we used living crystallization-driven self-assembly to fabricate poly(ε-caprolactone)-based 2D platelets with controlled size. Importantly, surface modification of the platelets in the third dimension was achieved by using functional monomers and light-induced polymerization. This method allows us to selectively regulate the height and fluorescence properties of the nanostructures. Using this approach, we gained unprecedented spatial control over the surface functionality in the specific region of complex 2D platelets.
RESUMEN
Polymer sustainability is synonymous with "bioderived polymers" and the zeitgeist of "using renewable feedstocks". However, this sentiment does not adequately encompass the requirements of sustainability in polymers. In addition to recycling considerations and mechanical performance, following green chemistry principles also needs to be maximized to improve the sustainability of polymer synthesis. The synthetic cost (i.e., maximizing atom economy, reducing chemical hazards, and lowering energy requirements) of producing polymers should be viewed as equally important to the monomer source (biomass vs petrol platform chemicals). Therefore, combining the use of renewable feedstocks with efficient syntheses and green chemistry principles is imperative to delivering truly sustainable polymers. The high efficiency, atom economy, and single reaction trajectories that define click chemistry reactions position them as ideal chemical approaches to synthesize polymers in a sustainable manner while simultaneously expanding the structural scope of accessible polymers from sustainably sourced chemicals.Click step-growth polymerization using the thiol-yne Michael addition, a reaction first reported over a century ago, has emerged as an extremely mild and atom-efficient pathway to yield high-performance polymers with controllable E/Z stereochemistry along the polymer backbone. Building on studies of aromatic thiol-yne polymers, around 10 years ago our group began investigating the thiol-yne reaction for the stereocontrolled synthesis of alkene-containing aliphatic polyesters. Our early studies established a convenient path to high-molecular-weight (>100 kDa) E-rich or Z-rich step-growth polymers by judiciously changing the catalyst and/or reaction solvent. This method has since been adapted to synthesize fast-degrading polyesters, high-performance polyamides, and resilient hydrogel biomaterials. Across several systems, we have observed dramatic differences in material properties among polymers with different alkene stereochemistry.We have also explored the analogous thiol-ene Michael reaction to create high-performance poly(ester-urethanes) with precise E/Z stereochemistry. In contrast to the stereoselective thiol-yne polymerization, here the use of monomers with predefined E/Z (geometric) isomerism (arising from either alkenes or the planar rigidity of ring units) affords polymers with total control over stereochemistry. This advancement has enabled the synthesis of tough, degradable materials that are derived from sustainable monomer feedstocks. Employing isomers of sugar-derived isohexides, bicyclic rigid-rings possessing geometric isomerism, led to degradable polymers with fundamentally opposing mechanical behavior (i.e., plastic vs elastic) simply by adjusting the stereochemistry of the isohexide.In this Account, we feature our investigation of thiol-yne/-ene click step-growth polymers and efforts to establish structure-property relationships toward degradable materials with practical mechanical performance in the context of sustainable polymers and/or biomaterials. We have paid attention to installing and controlling geometric isomerism by using these click reactions, an overarching objective of our work in this research area. The exquisite control of geometric isomerism that is possible within polymer backbones, as enabled by convenient click chemistry reactions, showcases a powerful approach to creating multipurpose degradable polymers.
Asunto(s)
Química Clic , Compuestos de Sulfhidrilo , Alquenos , Materiales Biocompatibles , Poliésteres , Polimerizacion , Polímeros/química , Compuestos de Sulfhidrilo/químicaRESUMEN
3D printing of pharmaceuticals offers a unique opportunity for long-term, sustained drug release profiles for an array of treatment options. Unfortunately, this approach is often limited by physical compounding or processing limitations. Modification of the active drug into a prodrug compound allows for seamless incorporation with advanced manufacturing methods that open the door to production of complex tissue scaffold drug depots. Here we demonstrate this concept using salicylic acids with varied prodrug structures for control of physical and chemical properties. The role of different salicylic acid derivatives (salicylic acid, bromosalicylic allyl ester, iodosalicylic allyl ester) and linker species (allyl salicylate, allyl 2-(allyloxy)benzoate, allyl 2-(((allyloxy)carbonyl)oxy)benzoate) were investigated using thiol-ene cross-linking in digital light processing (DLP) 3D printing to produce porous prodrug tissue scaffolds containing more than 50% salicylic acid by mass. Salicylic acid photopolymer resins were all found to be highly reactive (solidification within 5 s of irradiation at λ = 405 nm), while the cross-linked solids display tunable thermomechanical behaviors with low glass transition temperatures (Tgs) and elastomeric behaviors, with the carbonate species displaying an elastic modulus matching that of adipose tissue (approximately 65 kPa). Drug release profiles were found to be zero order, sustained release based upon hydrolytic degradation of multilayered scaffolds incorporating fluorescent modeling compounds, with release rates tuned through selection of the linker species. Cytocompatibility in 2D and 3D was further demonstrated for all species compared to polycarbonate controls, as well as salicylic acid-containing composites (physical incorporation), over a 2-week period using murine fibroblasts. The use of drugs as the matrix material for solid prodrug tissue scaffolds opens the door to novel therapeutic strategies, longer sustained release profiles, and even reduced complications for advanced medicine.
Asunto(s)
Profármacos , Andamios del Tejido , Ratones , Animales , Andamios del Tejido/química , Ácido Salicílico/química , Preparaciones de Acción Retardada/química , Liberación de Fármacos , Ésteres , Impresión TridimensionalRESUMEN
Aliphatic polyesters are widely studied due to their excellent properties and low-cost production and also because, in many cases, they are biodegradable and/or recyclable. Therefore, expanding the range of available aliphatic polyesters is highly desirable. This paper reports the synthesis, morphology, and crystallization kinetics of a scarcely studied polyester, polyheptalactone (PHL). First, we synthesized the η-heptalactone monomer by the Baeyer-Villiger oxidation of cycloheptanone before several polyheptalactones of different molecular weights (in the range between 2 and 12 kDa), and low dispersities were prepared by ring-opening polymerization (ROP). The influence of molecular weight on primary nucleation rate, spherulitic growth rate, and overall crystallization rate was studied for the first time. All of these rates increased with PHL molecular weight, and they approached a plateau for the highest molecular weight samples employed here. Single crystals of PHLs were prepared for the first time, and hexagonal-shaped flat single crystals were obtained. The study of the crystallization and morphology of PHL revealed strong similarities with PCL, making PHLs very promising materials, considering their potential biodegradable character.
Asunto(s)
Poliésteres , Cinética , Cristalización , Poliésteres/química , PolimerizacionRESUMEN
Aliphatic polycarbonates have gained increased attention as biomaterials largely owing to their biocompatibility and tunable degradation. Moreover, the ability to introduce functional handles in the polymer backbone through careful design of cyclic carbonate monomers or copolymerization with other biodegradable polymers has significantly contributed to the interest in exploiting this class of materials for biomedical applications. Such investigations have enabled their utility to be expanded to a wide variety of applications in the biomedical field, from drug delivery to tissue regeneration and the design of vascular grafts. Herein, we review the synthesis, degradation, and studies into biomedical applications of aliphatic polycarbonates obtained by ring-opening polymerization of cyclic carbonate monomers (ring sizes between 6 and 8). While all synthetic methods will be covered, particular emphasis will be given to materials that have been exploited for therapeutic applications in vitro and in vivo.
Asunto(s)
Materiales Biocompatibles , Cemento de Policarboxilato , Carbonatos , PolimerizacionRESUMEN
The 1,4-conjugate addition reaction between activated alkynes or acetylenic Michael acceptors and nucleophiles (i.e., the nucleophilic Michael reaction) is a historically useful organic transformation. Despite its general utility, the efficiency and outcomes can vary widely and are often closely dependent upon specific reaction conditions. Nevertheless, with improvements in reaction design, including catalyst development and an expansion of the substrate scope to feature more electrophilic alkynes, many examples now present with features that are congruent with Click chemistry. Although several nucleophilic species can participate in these conjugate additions, ubiquitous nucleophiles such as thiols, amines, and alcohols are commonly employed and, consequently, among the most well developed. For many years, these conjugate additions were largely relegated to organic chemistry, but in the last few decades their use has expanded into other spheres such as bioorganic chemistry and polymer chemistry. Within these fields, they have been particularly useful for bioconjugation reactions and step-growth polymerizations, respectively, due to their excellent efficiency, orthogonality, and ambient reactivity. The reaction is expected to feature in increasingly divergent application settings as it continues to emerge as a Click reaction.
Asunto(s)
Alcoholes/química , Alquinos/química , Aminas/química , Biopolímeros/química , Compuestos de Sulfhidrilo/química , Química Clic , Hidrogeles/síntesis química , Hidrogeles/químicaRESUMEN
Cardiac fibroblasts' (FBs) and cardiomyocytes' (CMs) behaviour and morphology are influenced by their environment such as remodelling of the myocardium, thus highlighting the importance of biomaterial substrates in cell culture. Biomaterials have emerged as important tools for the development of physiological models, due to the range of adaptable properties of these materials, such as degradability and biocompatibility. Biomaterial hydrogels can act as alternative substrates for cellular studies, which have been particularly key to the progression of the cardiovascular field. This review will focus on the role of hydrogels in cardiac research, specifically the use of natural and synthetic biomaterials such as hyaluronic acid, polydimethylsiloxane and polyethylene glycol for culturing induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs). The ability to fine-tune mechanical properties such as stiffness and the versatility of biomaterials is assessed, alongside applications of hydrogels with iPSC-CMs. Natural hydrogels often display higher biocompatibility with iPSC-CMs but often degrade quicker, whereas synthetic hydrogels can be modified to facilitate cell attachment and decrease degradation rates. iPSC-CM structure and electrophysiology can be assessed on natural and synthetic hydrogels, often resolving issues such as immaturity of iPSC-CMs. Biomaterial hydrogels can thus provide a more physiological model of the cardiac extracellular matrix compared to traditional 2D models, with the cardiac field expansively utilising hydrogels to recapitulate disease conditions such as stiffness, encourage alignment of iPSC-CMs and facilitate further model development such as engineered heart tissues (EHTs).
Asunto(s)
Células Madre Pluripotentes Inducidas , Miocitos Cardíacos , Miocitos Cardíacos/metabolismo , Hidrogeles/farmacología , Hidrogeles/metabolismo , Miocardio , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/metabolismo , Diferenciación CelularRESUMEN
The development of photopolymers that can be depolymerized and subsequently re-cured using the same light stimulus presents a significant technical challenge. A bio-sourced terpenoid structure, l-carvone, inspired the creation of a re-curable photopolymer in which the orthogonal reactivity of an irreversible thioether and a dynamic thiol-Michael bond enables both photopolymerization and thermally driven depolymerization of mechanically robust polymer networks. The di-alkene containing l-carvone was partially reacted with a multi-arm thiol to generate a non-crosslinked telechelic photopolymer. Upon further UV exposure, the photopolymer crosslinked into a mechanically robust network featuring reversible Michael bonds at junction points that could be activated to revert, or depolymerize, the network into a viscous telechelic photopolymer. The regenerated photopolymer displayed intrinsic re-curability over two recycles while maintaining the desirable thermomechanical properties of a conventional network: insolubility, resistance to stress relaxation, and structural integrity up to 170 °C. Our findings present an on-demand, re-curable photopolymer platform based on a sustainable feedstock.
Asunto(s)
Polímeros , Compuestos de Sulfhidrilo , Alquenos , Polímeros/química , Compuestos de Sulfhidrilo/química , SulfurosRESUMEN
Stereochemistry in polymers can be used as an effective tool to control the mechanical and physical properties of the resulting materials. Typically, though, in synthetic polymers, differences among polymer stereoisomers leads to incremental property variation, i.e., no changes to the baseline plastic or elastic behavior. Here we show that stereochemical differences in sugar-based monomers yield a family of nonsegmented, alternating polyurethanes that can be either strong amorphous thermoplastic elastomers with properties that exceed most cross-linked rubbers or robust, semicrystalline thermoplastics with properties comparable to commercial plastics. The stereochemical differences in the monomers direct distinct intra- and interchain supramolecular hydrogen-bonding interactions in the bulk materials to define their behavior. The chemical similarity among these isohexide-based polymers enables both statistical copolymerization and blending, which each afford independent control over degradability and mechanical properties. The modular molecular design of the polymers provides an opportunity to create a family of materials with divergent properties that possess inherently built degradability and outstanding mechanical performance.
RESUMEN
Biodegradable shape memory elastomers have the potential for use in soft tissue engineering, drug delivery, and device fabrication applications. Unfortunately, few materials are able to meet the targeted degradation and mechanical properties needed for long-term implantable devices. In order to overcome these limitations, we have designed and synthesized a series of unsaturated polyurethanes that are elastic, degradable, and nontoxic to cells in vitro. The polymerization included a nucleophilic thiol-yne Michael addition between a urethane-based dipropiolate and a dithiol to yield an α,ß-unsaturated carbonyl moiety along the polymer backbone. The alkene stereochemistry of the materials was tuned between 32 and 82% cis content using a combination of an organic base and solvent polarity, which collectively direct the nucleophilic addition. The bulk properties such as tensile strength, modulus, and glass transition temperature can also be tuned broadly, and the hydrogen bonding imparted by the urethane moiety allows for these materials to elicit cyclic shape memory behavior. We also demonstrated that the in vitro degradation properties are highly dependent on the alkene stereochemistry.
Asunto(s)
Materiales Biocompatibles , Poliuretanos , Alquenos , Materiales Biocompatibles/química , Elastómeros/química , Ensayo de Materiales , Poliuretanos/química , Compuestos de SulfhidriloRESUMEN
The remarkable elasticity and tensile strength found in natural elastomers are challenging to mimic. Synthetic elastomers typically feature covalently cross-linked networks (rubbers), but this hinders their reprocessability. Physical cross-linking via hydrogen bonding or ordered crystallite domains can afford reprocessable elastomers, but often at the cost of performance. Herein, we report the synthesis of ultra-tough, reprocessable elastomers based on linear alternating polymers. The incorporation of a rigid isohexide adjacent to urethane moieties affords elastomers with exceptional strain hardening, strain rate dependent behavior, and high optical clarity. Distinct differences were observed between isomannide and isosorbide-based elastomers where the latter displays superior tensile strength and strain recovery. These phenomena are attributed to the regiochemical irregularities in the polymers arising from their distinct stereochemistry and respective inter-chain hydrogen bonding.
Asunto(s)
Elastómeros , Isosorbida , Elastómeros/química , Enlace de Hidrógeno , Isosorbida/químicaRESUMEN
Stereochemistry provides an appealing handle by which to control the properties of small molecules and polymers. While it is established that stereochemistry in linear polymers affects their bulk mechanical properties, the application of this concept to photocurable networks could allow for resins that can accommodate the increasing demand for mechanically diverse materials without the need to significantly change their formulation. Herein, we exploit cis and trans stereochemistry in pre-resin oligomers to create photoset materials with mechanical properties and degradation rates that are controlled by their stereochemistry and molecular weight. Both the synthesis of stereopure (cis or trans) acrylate-terminated pre-polymers and the subsequent UV-triggered cross-linking occurred with a retention of stereochemistry, close to 100%. The stereochemistry of a 4 kDa oligomer within the resin enabled the tuning of the formulation to either a fast eroding, soft cis elastomer or a stiff trans plastic that is more resistant to degradation. These results demonstrate that stereochemistry is a powerful tool to modify the stiffness, toughness, and degradability of high-resolution, three-dimensional printed scaffolds from the same formulated ratio of components.
RESUMEN
Polyorthoesters are a highly desirable class of cytocompatible materials that are able to rapidly surface-erode. Despite their promise, their mechanical weakness and complex synthesis have limited their processability and application in advanced technologies. Herein, we report a readily accessible family of cross-linked poly(orthoester-thioether) (POETE) materials that are suitable for processing via photopolymerization. Polymer networks are accessed through bifunctional orthoester precursors using simple thiol-ene addition chemistry. The mobility of the polymer chains and the cross-linking density within the polymer structure can be tuned through the choice of the monomer, which in turn presents customizable thermal and mechanical properties in the resulting materials. The photopolymerizability of these POETE materials also allows for processing via additive manufacturing, which is demonstrated on a commercial 3D printer. Post-processing conditions and architecture are crucial to material degradability and are exploited for programmed bulk-release applications with degradation rate and release time linearly dependent on the specimen dimensions, such as strand or shell thickness. Analogous to acid-releasing polylactide materials, degradation products of the POETE materials show cytocompatibility below a certain concentration/acidity threshold. This research highlights the simplicity, versatility, and applicability of POETE networks as cytocompatible, surface-eroding materials that can be processed by additive manufacturing for advanced applications.
Asunto(s)
Impresión Tridimensional , Compuestos de Sulfhidrilo , Hidrogeles , PolímerosRESUMEN
The synthesis of well-defined propargyl-functional aliphatic polycarbonates is achieved via the organocatalytic ring-opening polymerization of prop-2-yn-1-yl 2-oxo-1,3,6-dioxazocane-6-carboxylate (P-8NC) using a wide variety of commercially available or readily made, shelf-stable organocatalysts. The resulting homopolymers show low dispersities and end-group fidelity, with the versatility of the system being demonstrated by the synthesis of telechelic copolymers and block copolymers with molar mass up to 40 kDa.
Asunto(s)
Alquinos , Cemento de Policarboxilato , Carbonatos , PolimerizacionRESUMEN
The stereochemistry of polymers has a profound impact on their mechanical properties. While this has been observed in thermoplastics, studies on how stereochemistry affects the bulk properties of swollen networks, such as hydrogels, are limited. Typically, changing the stiffness of a hydrogel is achieved at the cost of changing another parameter, that in turn affects the physical properties of the material and ultimately influences the cellular response. Herein, we report that by manipulating the stereochemistry of a double bond, formed in situ during gelation, materials with diverse mechanical properties but comparable physical properties can be obtained. Click-hydrogels that possess a high %â trans content are stiffer than their high %â cis analogues by almost a factor ofâ 3. Human mesenchymal stem cells acted as a substrate stiffness cell reporter demonstrating the potential of these platforms to study mechanotransduction without the influence of other external factors.
RESUMEN
Chemical recycling of plastic waste represents a greener alternative to landfill and incineration, and potentially offers a solution to the environmental consequences of increased plastic waste. Most plastics that are widely used today are designed for durability, hence currently available depolymerisation methods typically require harsh conditions and when applied to blended and mixed plastic feeds generate a mixture of products. Herein, we demonstrate that the energetic differences for the glycolysis of BPA-PC and PET in the presence of a protic ionic salt TBD:MSA catalyst enables the selective and sequential depolymerisation of these two commonly employed polymers. Employing the same procedure, functionalised cyclic carbonates can be obtained from both mixed plastic wastes and industrial polymer blend. This methodology demonstrates that the concept of catalytic depolymerisation offers great potential for selective polymer recycling and also presents plastic waste as a "greener" alternative feedstock for the synthesis of high added value molecules.
RESUMEN
With society's growing awareness of climate change, novel renewable and naturally sourced materials have received increasing attention as substitutes for petroleum-based products. Laminarin (LAM-OH) is a highly abundant, nontoxic, degradable polysaccharide found in marine organisms and hence is a promising sustainable polymeric candidate. This work reports on a simple, environmentally friendly, and customizable functionalization strategy for producing a toolbox of LAM-OH derivatives under mild conditions. Herein, natural-origin macromolecules exhibiting specific chemical moieties, namely, allyl, amine, carboxylic acid, thiol, aldehyde, and catechol, were prepared and chemically characterized. Furthermore, the obtained polymers were processed into cytocompatible hydrogels, obtained by employing distinct cross-linking mechanisms, to assess their potential for biomedical purposes. The application scope of such polymers could be extended to fields such as catalysis, cosmetics, life sciences, and food packaging, which can also benefit from having sustainable, nontoxic, and degradable materials. Moreover, it is anticipated that the methodology employed to create this library of new natural-based products could be adapted to modify other polysaccharides and biopolymers in general.
RESUMEN
Biosourced materials are gaining interest industrially, but there are still limitations on the library of available materials suitable for advanced manufacturing, especially using photopolymerization-based processing techniques. Terpenes, such as myrcene, are naturally produced materials possessing structural features, specifically alkenes, that avail themselves for such techniques. Free-radical and anionic polymerization techniques were used to explore molecular architecture, such as branching, as well as molecular weight and dispersity on physical properties prior to the production of 3D printing photopolymer resins. The polymyrcene resins were printed into dogbones and mold templates for soft materials. Model reactions with monofunctional thiols were used to demonstrate the potential for postpolymerization and fabrication functionalization, accompanying a physical demonstration where the surface hydrophobicity of polymyrcene could be tuned from superhydrophobic when using an alkyl chain monothiol (greater than 100° water contact angle) to a hydrophilic surface displaying a water contact angle of less than 45° compared with that of the unmodified surface (â¼60°). Tunable bulk and surface properties are a unique feature for 3D printing materials and demonstrate the potential of polymyrcene and other biosourced photopolymers to a wide range of research applications.