Fluorogel elastomers with tunable transparency, elasticity, shape-memory, and antifouling properties.

Omniphobic fluorogel elastomers were prepared by photocuring perfluorinated acrylates and a perfluoropolyether crosslinker. By tuning either the chemical composition or the temperature that control the crystallinity of the resulting polymer chains, a broad range of optical and mechanical properties of the fluorogel can be achieved. After infusing with fluorinated lubricants, the fluorogels showed excellent resistance to wetting by various liquids and anti-biofouling behavior, while maintaining cytocompatiblity.

Delivery of multiple siRNAs using lipid-coated PLGA nanoparticles for treatment of prostate cancer.

Nanotechnology can provide a critical advantage in developing strategies for cancer management and treatment by helping to improve the safety and efficacy of novel therapeutic delivery vehicles. This paper reports the fabrication of poly(lactic acid-co-glycolic acid)/siRNA nanoparticles coated with lipids for use as prostate cancer therapeutics made via a unique soft lithography particle molding process called Particle Replication In Nonwetting Templates (PRINT). The PRINT process enables high encapsulation efficiency of siRNA into neutral and monodisperse PLGA particles (32-46% encapsulation efficiency). Lipid-coated PLGA/siRNA PRINT particles were used to deliver therapeutic siRNA in vitro to knockdown genes relevant to prostate cancer.

Reductively responsive siRNA-conjugated hydrogel nanoparticles for gene silencing.

A critical need still remains for effective delivery of RNA interference (RNAi) therapeutics to target tissues and cells. Self-assembled lipid- and polymer-based systems have been most extensively explored for transfection with small interfering RNA (siRNA) in liver and cancer therapies. Safety and compatibility of materials implemented in delivery systems must be ensured to maximize therapeutic indices. Hydrogel nanoparticles of defined dimensions and compositions, prepared via a particle molding process that is a unique off-shoot of soft lithography known as particle replication in nonwetting templates (PRINT), were explored in these studies as delivery vectors. Initially, siRNA was encapsulated in particles through electrostatic association and physical entrapment. Dose-dependent gene silencing was elicited by PEGylated hydrogels at low siRNA doses without cytotoxicity. To prevent disassociation of cargo from particles after systemic administration or during postfabrication processing for surface functionalization, a polymerizable siRNA pro-drug conjugate with a degradable, disulfide linkage was prepared. Triggered release of siRNA from the pro-drug hydrogels was observed under a reducing environment while cargo retention and integrity were maintained under physiological conditions. Gene silencing efficiency and cytocompatibility were optimized by screening the amine content of the particles. When appropriate control siRNA cargos were loaded into hydrogels, gene knockdown was only encountered for hydrogels containing releasable, target-specific siRNAs, accompanied by minimal cell death. Further investigation into shape, size, and surface decoration of siRNA-conjugated hydrogels should enable efficacious targeted in vivo RNAi therapies.

Novel platforms for vascular carriers with controlled geometry.

The first-generation platforms for vascular drug delivery adopted spherical morphologies. These carriers relied primarily on the size dependence of the enhanced permeability and retention effect to passively target vasculature, resulting in inefficient delivery due to significant variation in endothelial permeability. Enhanced delivery typically requires active targeting via receptor-mediated endocytosis by surface conjugation of targeting ligands. However, vascular carriers (VCs) still face numerous challenges en route to reaching their targets before delivery. The control of carrier shape offers opportunities to overcome in vivo barriers and enhance vascular drug delivery. Geometric features influence the ability of carrier particles to navigate physiological flow patterns, evade biological clearance mechanisms, sustain circulation, adhere to the vascular surface, and finally transport across or internalize into the endothelium. Although previous formulation strategies limited the fabrication of nonspherical carriers, numerous recent advances in both top-down and bottom-up fabrication techniques have enabled shape modulation as a key design element. As part of a series on vascular drug delivery, this review focuses on recent developments in novel vascular platforms with controlled geometry that enhance or modulate delivery functions. Starting with an overview of controlled geometry platforms, we review their shape-dependent functional characteristics for each stage of their vascular journey in vivo. We sequentially explore carrier geometries that evade reticuloendothelial system uptake, display enhanced circulation persistence and margination dynamics in flow, encourage adhesion to the vascular surface or extravasation through endothelium, and impact extravascular transport and cell internalization. The eventual biodistribution of VCs results from the culmination of their successive navigation of all these barriers and is profoundly influenced by their morphology. To enhance delivery efficacy, carrier designs synergistically combining controlled geometry with standard drug delivery strategies such as targeting moieties, surface decorations, and bulk material properties are discussed. Finally, we speculate on possibilities for innovation, harnessing shape as a design parameter for the next generation of vascular drug delivery platforms.

Zapped assembly of polymeric (ZAP) nanoparticles for anti-cancer drug delivery.

The starting hypothesis for this work was that microwave synthesis could enable the rapid assembly of polymers into size-specific nanoparticles (NPs). The Zapped Assembly of Polymeric (ZAP) NPs was initially realized using poly(lactic-co-glycolic acid)-poly(ethylene glycol) (PLGA-PEG) block copolymers and distinct microwave reaction parameters. A library of polymeric NPs was generated with sizes ranging from sub-20 nm to 350 nm and low polydispersity. Select ZAP NPs were synthesized in 30 seconds at different scales and concentrations, up to 200 mg and 100 mg mL-1, without substantial size variation. ZAP NPs with diameters of 25 nm, 50 nm, and 100 nm were loaded with the chemotherapeutic paclitaxel (PXL), demonstrated unique release profiles, and exhibited dose-dependent cytotoxicity similar to Taxol. Incorporation of d-alpha tocopheryl polyethylene glycol succinate (TPGS) and PLGA33k allowed for the production of a sub-40 nm NP with an exceptionally high loading of PXL (12.6 wt%, ca. 7 times the original NP) and a slower release profile. This ZAP NP platform demonstrated scalable, flexible, and tunable synthesis with potential toward clinical scale production of size-specific drug carriers.

Immuno-PET imaging of tumor-infiltrating lymphocytes using zirconium-89 radiolabeled anti-CD3 antibody in immune-competent mice bearing syngeneic tumors.

The ability to non-invasively monitor tumor-infiltrating T cells in vivo could provide a powerful tool to visualize and quantify tumor immune infiltrates. For non-invasive evaluations in vivo, an anti-CD3 mAb was modified with desferrioxamine (DFO) and radiolabeled with zirconium-89 (Zr-89 or 89Zr). Radiolabeled 89Zr-DFO-anti-CD3 was tested for T cell detection using positron emission tomography (PET) in both healthy mice and mice bearing syngeneic bladder cancer BBN975. In vivo PET/CT and ex vivo biodistribution demonstrated preferential accumulation and visualization of tracer in the spleen, thymus, lymph nodes, and bone marrow. In tumor bearing mice, 89Zr-DFO-anti-CD3 demonstrated an 11.5-fold increase in tumor-to-blood signal compared to isotype control. Immunological profiling demonstrated no significant change to total T cell count, but observed CD4+ T cell depletion and CD8+ T cell expansion to the central and effector memory. This was very encouraging since a high CD8+ to CD4+ T cell ratio has already been associated with better patient prognosis. Ultimately, this anti-CD3 mAb allowed for in vivo imaging of homeostatic T cell distribution, and more specifically tumor-infiltrating T cells. Future applications of this radiolabeled mAb against CD3 could include prediction and monitoring of patient response to immunotherapy.

Rapid microwave-assisted synthesis of sub-30nm lipid nanoparticles.

HYPOTHESIS: Accessing the phase inversion temperature by microwave heating may enable the rapid synthesis of small lipid nanoparticles. EXPERIMENTS: Nanoparticle formulations consisted of surfactants Brij 78 and Vitamin E TPGS, and trilaurin, trimyristin, or miglyol 812 as nanoparticle lipid cores. Each formulation was placed in water and heated by microwave irradiation at temperatures ranging from 65°C to 245°C. We observed a phase inversion temperature (PIT) for these formulations based on a dramatic decrease in particle Z-average diameters. Subsequently, nanoparticles were manufactured above and below the PIT and studied for (a) stability toward dilution, (b) stability over time, (c) fabrication as a function of reaction time, and (d) transmittance of lipid nanoparticle dispersions. FINDINGS: Lipid-based nanoparticles with distinct sizes down to 20-30nm and low polydispersity could be attained by a simple, one-pot microwave synthesis. This was carried out by accessing the phase inversion temperature using microwave heating. Nanoparticles could be synthesized in just one minute and select compositions demonstrated high stability. The notable stability of these particles may be explained by the combination of van der Waals interactions and steric repulsion. 20-30nm nanoparticles were found to be optically transparent.

Generating Better Medicines for Cancer.

The complexity of tumor biology warrants tailored drug delivery for overcoming the major challenges faced by cancer therapies. The versatility of the PRINT® (Particle Replication In Non-wetting Templates) process has enabled the preparation of shape- and size-specific particles with a wide range of chemical compositions and therapeutic cargos. Different particle matrices and drugs may be combined in a plug-and-play approach, such that physico-chemical characteristics of delivery vectors may be optimized for biocompatibility, cargo stability and release, circulation half-life, and efficacy. Thus, the engineering of particles for cancer therapy with specific biophysical behaviors and cellular responses has been demonstrated via the PRINT process.

Rapidly-dissolvable microneedle patches via a highly scalable and reproducible soft lithography approach.

Microneedle devices for transdermal drug delivery have recently become an attractive method to overcome the diffusion-limiting epidermis and effectively transport therapeutics to the body. Here, we demonstrate the fabrication of highly reproducible and completely dissolvable polymer microneedles on flexible water-soluble substrates. These biocompatible microneedles (made by using a soft lithography process known as PRINT) showed efficacy in piercing both murine and human skin samples and delivering a fluorescent drug surrogate to the tissue.