RESUMEN
Background: Knee orthoses have been extensively used as a nonsurgical approach to improving knee deficiencies. Currently, arthritic knee conditions remain the leading cause of disability, and this number is expected to increase. As the use of knee orthoses varies widely, so has their effectiveness which is still largely debatable. Here, we present the functions and effectiveness of the three most prominent knee orthotic models dedicated to supporting knee osteoarthritis-unloader, patellofemoral, and knee sleeves. Purpose/Research Question: Considering the depth and diversity of the many clinical studies and documented laboratory reports published to date, this literature review was created to educate the clinician, patient, and researcher on common knee orthoses used for the management of arthritic knee conditions. In doing so, we discuss their design, biomechanical effects, and clinical efficacy, as well as broader outcomes, limitations, and recommendations for use. Results/Synthesis: The knee orthoses discussed within the scope of this paper are dedicated to protecting the knee against strenuous compressive loads that may affect the patellofemoral and tibiofemoral joints of the knee. Since the knee has multiple axes of motion and articulating surfaces that experience different loads during functional activities, it can be implied that, to a large extent, knee brace designs can differ drastically. Unloader knee orthoses are designed to decrease tibiofemoral and patellofemoral joint pressures. Patellofemoral knee orthoses are designed to decrease strain on the patellofemoral and quadriceps tendons while stabilizing the patella. Knee sleeves are designed to stabilize movements, reduce pain in joints, and improve proprioception across the knee joint. Conclusion: Although patients often report benefits from wearing braces, these benefits have not been confirmed by clinicians and scientific investigators. Results from these three orthosis types show that clinical efficacy is still elusive due to the different methodologies used by researchers. Layman Summary: Knee orthoses also referred to as knee brace are commonly used for support and stability of the knee. Unloader knee braces are designed to relieve and support those suffering from knee osteoarthritis by improving physical impairment and reducing pain. Patellofemoral knee braces aim to help patients manage patellofemoral pain syndrome. Rehabilitative compression sleeves, also known as knee sleeves, are often used to assist patients suffering from knee pain and laxity. Important findings on the three knee braces discussed show discrepancies in results. Their effectiveness and validity are yet to be understood.
RESUMEN
Arthroplasty implants can undergo corrosion at the modular components, trunnion, and hinges, owing to implant material makeup, micromotion, and interaction with body fluid. In this review, various mechanisms of corrosion in arthroplasty were explored with suggestions on means of improvement. We identified 10 methods including pitting, crevice, mechanically assisted crevice corrosion, fretting, fretting initiated crevice corrosion, mechanically assisted taper corrosion, galvanic corrosion, stress/tension, fatigue corrosion, and inflammatory cell induced corrosion. The position of implants on the galvanic series, and their ability to maintain passivation contribute to their longevity in service. Due to the relative motion of arthroplastic components, bio-tribocorrosion may disrupt passive oxide films, and pitting is initiated at interfaces. Thus, corrosion in arthroplasty as an electrochemical phenomenon mainly starts on one spot and progresses in 3 steps: (1) the oxidative dissolution of metal from implant surfaces into the aqueous active environment, releasing cations, (2) the attraction of electrons to the opposite charge created at another point of the implant surface, producing current flow, and (3) the formation of oxides of metal and metal hydroxides deposited as rust at the surface of the implant. Recent innovations in material manufacturing continue to improve the efficiency of arthroplasty; however, the component parts remain susceptible to bio-tribocorrosion. Thus, a complete eradication of corrosion in arthroplasty would require futuristic materials with improvement in recent materials and designs, derived from knowledge of existing retrieved implants, and strategies to provide overall surface finishes that protect against bio-tribocorrosion.
Asunto(s)
Metales , Falla de Prótesis , Humanos , Corrosión , Diseño de Prótesis , Artroplastia , ÓxidosRESUMEN
Osteoarthritis affects millions of people worldwide but current treatments using analgesics or anti-inflammatory drugs only alleviate symptoms of this disease. Here, we present an injectable, biodegradable piezoelectric hydrogel, made of short electrospun poly-L-lactic acid nanofibers embedded inside a collagen matrix, which can be injected into the joints and self-produce localized electrical cues under ultrasound activation to drive cartilage healing. In vitro, data shows that the piezoelectric hydrogel with ultrasound can enhance cell migration and induce stem cells to secrete TGF-ß1, which promotes chondrogenesis. In vivo, the rabbits with osteochondral critical-size defects receiving the ultrasound-activated piezoelectric hydrogel show increased subchondral bone formation, improved hyaline-cartilage structure, and good mechanical properties, close to healthy native cartilage. This piezoelectric hydrogel is not only useful for cartilage healing but also potentially applicable to other tissue regeneration, offering a significant impact on the field of regenerative tissue engineering.