RESUMEN
Apatite particles prepared from natural phosphate rock and grafted with nitrilotris(methylene)triphosphonate (NTP) were evaluated for Pb2+ and Zn2+ sorption from aqueous solutions. Sorption capacities as high as 640 mg.g-1 and 300 mg.g-1 could be obtained for the highest organic content (10 wt%). Analysis of the sorption isotherms using Langmuir, Freundlich and Dubinin-Kaganer-Radushkevich models revealed that Pb2+ ions have a larger affinity for apatite (sorption energy ≈ 8 kJ.mol-1) than for NTP so that organo-modified surfaces led to a heterogenous adsorption process. In contrast, Zn2+ interacts weakly (sorption energy ≈ 1 kJ.mol-1) and similarly with the mineral surface and the organic moieties following a homogenous sorption process. Such an association of organic metal ligands with reactive apatite surfaces within porous materials appears as a promising strategy to obtain efficient adsorbents at low cost and limited environmental impact.
RESUMEN
Batch adsorption experiments were conducted to investigate the removal of phenol from wastewater by addition of three apatites (porous hydroxyapatite (PHAp) and crystalline hydroxyl- (HAp) and fluoroapatite (FAp)). The best performances were obtained with porous hydroxyapatite PHAp, which presented higher adsorption capacities (experimental: 8.2mgg(-1); calculated 9.2mgg(-1)) than HAp and FAp (3-4mgg(-1)). Different models of adsorption were used to describe the kinetics data, to calculate corresponding rate constants and to predict the theoretical capacities of apatite surfaces for phenol adsorption. A mechanism of phenol adsorption associating chemisorption and physisorption processes is presented allowing the discussion of the variations in adsorption behavior between these materials in terms of specific surface area and chemical composition. These data suggest that apatites are promising materials for phenol sorption.
Asunto(s)
Apatitas/química , Fenol/química , Agua/química , Adsorción , Cinética , Propiedades de SuperficieRESUMEN
A natural phosphate rock and two synthetic mesoporous hydroxyapatites were evaluated for the removal of pyridine and phenol from aqueous solutions. Experiments performed by the batch method showed that the sorption process occurs by a first order reaction for both pyridine and phenol. In contrast, the Freundlich model was able to describe sorption isotherms for phenol but not for pyridine. In parallel, the three apatites exhibit similar pyridine sorption capacities whereas phenol loading was in agreement with their respective specific surface area. This was attributed to the strong interaction arising between pyridine and apatite surface that hinders further inter-particular diffusion. This study suggests that, despite its low specific surface area, natural phosphate rock may be used as an efficient sorbent material for specific organic pollutants, with comparable efficiency and lower processing costs than some activated carbons.