Effect of Spin-Orbit Coupling on Phonon-Mediated Magnetic Relaxation in a Series of Zero-Valent Vanadium, Niobium, and Tantalum Isocyanide Complexes.

Spin-vibronic coupling leads to spin relaxation in paramagnetic molecules, and an understanding of factors that contribute to this phenomenon is essential for designing next-generation spintronics technology, including single-molecule magnets and spin-based qubits, wherein long-lifetime magnetic ground states are desired. We report spectroscopic and magnetic characterization of the isoelectronic and isostructural series of homoleptic zerovalent transition metal triad M(CNDipp)6 (M = V, Nb, Ta; CNDipp = 2,6-diisopropylphenyl isocyanide) and show experimentally the significant increase in spin relaxation rate upon going from V to Nb to Ta. Correlated electronic calculations and first principle spin-phonon computations support the role of spin-orbit coupling in modulating spin-phonon relaxation. Our results provide experimental evidence that increasing magnetic anisotropy through spin-orbit coupling interactions leads to increased spin-vibronic relaxation, which is detrimental to long spin lifetime in paramagnetic molecules.

Ta(CNDipp)6 : An Isocyanide Analogue of Hexacarbonyltantalum(0).

Hexakis(2,6-diisopropylphenylisocyanide)tantalum is the first isocyanide analogue of the highly unstable Ta(CO)6 and represents the only well-defined zerovalent tantalum complex to be prepared by conventional laboratory methods. Two prior examples of homoleptic Ta0 complexes are known, Ta(benzene)2 and Ta(dmpe)3 , dmpe=1,2-bis(dimethylphosphano)ethane, but these have only been accessed via ligand co-condensation with tantalum vapor in a sophisticated metal-atom reactor. Consistent with its 17-electron nature, Ta(CNDipp)6 undergoes facile one-electron oxidation, reduction, or disproportionation reactions. In this sense, it qualitatively resembles V(CO)6 , the only paramagnetic homoleptic metal carbonyl isolable under ambient conditions.

(2.2.2-Cryptand)potassium tetra-carbonyl-cobaltate(-I).

The title salt, [K(C18H36N2O6)][Co(CO)4], is an example of a classical carbonyl-metalate. The asymmetric unit contains one cation and one tetrahedral anion, both in general positions. Based on comparison of the four carbonyl C-O bond lengths and C-Co-C angles, the anion is unperturbed by the cation, which is normal for an alkali metal fully encased by a cryptand cage.

Crystal structure of [(1,2,3,4,11,12-η)-anthracene]tris-(tri-methyl-stann-yl)cobalt(III).

The asymmetric unit of the title structure, [Co(η(6)-C14H10){Sn(CH3)3}3], contains two independent mol-ecules. Each anthracene ligand is η(6)-coordinating to a Co(III) cation and is nearly planar [fold angles of 5.4 (3) and 9.7 (3)°], as would be expected for its behaving almost entirely as a donor to a high-oxidation-state metal center. The slight fold in each anthracene ligand gives rise to slightly longer Co-C bond lengths to the ring junction carbon atoms than to the other four. Each Co(III) cation is further coordinated by three Sn(CH3)3 ligands, giving each mol-ecule a three-legged piano-stool geometry. In each of the two independent mol-ecules, the trio of SnMe3 ligands are modeled as disordered over two positions, rotated by approximately 30%, such that the C atoms nearly overlap. In one mol-ecule, the disorder ratio refined to 0.9365 (8):0.0635 (8), while that for the other refined to 0.9686 (8):0.0314 (8). The mol-ecules are well separated, and thus no significant inter-molecular inter-actions are observed. The compound is of inter-est as the first structure report of an η(6)-anthracene cobalt(III) complex.

Bis{bis-[1-meth-oxy-2-(2-meth-oxy-eth-oxy)ethane-κ(3) O,O',O'']sodium} 1,1,2,2-tetra-phenyl-ethane-1,2-diide.

Crystals of the title salt, [Na(C6H14O3)2]2(C26H20), were grown from a tetra-hydro-furan/diglyme/Et2O solvent mixture [diglyme is 1-meth-oxy-2-(2-meth-oxy-eth-oxy)ethane]. The cations and dianion are separated in the crystal structure, unlike in the other three structurally characterized dialkali metal tetra-phenyl-ethyl-ene salts. The asymmetric unit contains one [Na(diglyme)2](+) cation and one half of the [Ph2CCPh2](2-) dianion. The latter lies on a twofold rotation axis. C-C bond-length redistribution displays that excessive electron density of the dianion is predominantly located at the C atoms of a former double bond and at all eight ortho positions. The studied crystal was a twin, with the ratio of two major components being 0.2143 (9):0.7857 (9). The twin operation is a twofold rotation around the a axis.

(η(4)-Cyclo-octa-tetra-ene)(η(8)-cyclo-octa-tetra-ene)iodido-tantalum(V).

The title complex, [Ta(η(4)-C8H8)(η(8)-C8H8)I], lies across a crystallographic mirror plane that includes the Ta(V) atom and the iodide ligand. One cyclo-octa-tetra-ene (cot) ring is η(4)-coordinating and is bis-ected by the mirror plane. The fold angle between the plane of the coordinating butadiene portion and the middle plane of the ring is 27.4 (4)°. An additional minor fold angle of 9.3 (7)° exists between the final plane in the ring and the middle plane. The other cot ring is η(8)-coordinating and is also cut by the mirror plane. In this case, the ring is disordered over the mirror plane, and one position is modeled with appropriate restraints and constraints with respect to distances, angles and displacement parameters (the second position is generated by symmetry). This ring is nearly planar, with an r.m.s. deviation of only 0.05 Šwhen all eight C atoms are included in the calculation. Pairs of inter-molecular η(8)-cot rings are parallel stacked and slightly off center, with a centroid-centroid distance of 3.652 Å. No other significant inter-molecular inter-actions are observed. The compound is of inter-est as the first structurally characterized mixed halogen-cot complex of the group 5 metals and contains the longest terminal Ta-I distance [3.0107 (5) Å] reported to date.

Crystal structure and synthesis of the bis(anthracene)dicuprate dianion as the dipotassium salt, [K(tetrahydrofuran)2]2[{Cu(9,10-η2-anthracene)}2], the first anionic arene complex of copper.

Reactions of (tricyclohexylphosphane)copper(I) chloride with two equivalents of potassium anthracene (KAn) in tetrahydrofuran (THF) at 200 K provides air-sensitive but thermally stable (at 293 K) solutions from which yellow crystalline blocks of bis[bis(tetrahydrofuran-κO)potassium] bis(µ-anthracene-κ2C9:C10)dicopper, [K(THF)2]2[{Cu(9,10-η2-C14H10)}2] or [K(C4H8O)2]2[Cu2(C14H10)2], 1, were isolated in about 50% yield. Single-crystal X-ray crystallographic analysis of 1 confirmed the presence of the first known (arene)cuprate. Also, unlike all previously known homoleptic (anthracene)metallates of d-block elements, which contain metals coordinated only to terminal rings, the organocuprate unit in 1 contains copper bound to the 9,10-carbons of the central ring of anthracene. No other d- or f-block metal is known to afford an anthracene or other aromatic hydrocarbon complex having the architecture of organodicuprate 1.

Naphthalene and anthracene cobaltates(1-): useful storable sources of an atomic cobalt anion.

Reductions of CoBr(2) or cobaltocene by 3 equiv of potassium anthracene radical anion in tetrahydrofuran (THF) afford 60-80% yields of bis(anthracene)cobaltate(1-) (1), of interest as a readily accessible and quite labile source of spin-paired atomic Co(-). Although the unsolvated potassium salt of 1 is thermally unstable at 20 °C, the [K(18-crown-6)(THF)(2)](+) salt of 1 functions as a useful storable crystalline reagent for Co(-) in several reactions. Previously known classic cobaltates, [CoL(4)](-), for L = 1/2 (1,3-butadiene) (2), PF(3) (3), and P(OiPr)(3) (5), were obtained directly from 1 and structurally characterized for the first time. Anion 3 is noteworthy because it appears to possess the shortest known Co-P distance, av = 2.012(4) Å. Although the naphthalene analogue of 1 is not yet available as a pure substance, low-temperature reductions of CoBr(2) or cobaltocene by naphthalene radical anion in the presence of 1,5-cyclooctadiene (COD) afford variable yields (80-90% from CoCp(2)) of (naphthalene)(COD)cobaltate(1-) (10). Ready displacement of naphthalene in 10 by L = 1,3-butadiene, 2,2'-bipyridine, and COD occurs to give good yields of the respective [Co(L)(COD)](-), all of which have been structurally characterized. Both ligands in 10 are displaced by tert-butylisocyanide to afford [Co(CNtBu)(4)](-) (16), the first isolable and structurally characterized homoleptic alkylisocyanometalate. The molecular structure of 16 shows unprecedented bending of the isocyanides, av C-N-C = 137(2)°, for homoleptic isocyanide complexes.

Bis(η-naphthalene)-molybdenum(0).

The title compound, [Mo(C(10)H(8))(2)], was prepared from the naphthalene radical anion and MoCl(4)(thf)(2) (thf is tetra-hydro-furan). In the crystal, the mol-ecule is located on an inversion center. The Mo atom is equally disordered over two positions; the range of Mo-C distances is 2.2244 (19)-2.3400 (17) Šfor both components of the disorder.

(18-Crown-6)potassium [(1,2,5,6-η)-cyclo-octa-1,5-diene][(1,2,3,4-η)-naph-tha-lene]-ferrate(-I).

The title salt, [K(C(12)H(24)O(6))][Fe(C(8)H(12))(C(10)H(8))], is the only known naphthalene complex containing iron in a formally negative oxidation state. Each (naphthalene)(1,5-cod)ferrate(-I) anion is in contact with one (18-crown-6)potassium cation via K⋯C contacts to the outer four carbon atoms of the naphthalene ligand (cod = 1,5-cyclo-octa-diene, 18-crown-6 = 1,4,7,10,13,16-hexa-oxacyclo-octa-deca-ne). When using the midpoints of the coordinating olefin bonds, the overall geometry of the coordination sphere around iron can be best described as distorted tetra-hedral. The naphthalene fold angle between the plane of the iron-coordinating butadiene unit and the plane containing the exo-benzene moiety is 19.2 (1)°.

(2.2.2-Cryptand)potassium tetra-kis-(η(2)-ethyl-ene)cobaltate(-I).

The title salt, [K(C(18)H(36)N(2)O(6))][Co(C(2)H(4))(4)], is one of only two known homoleptic ethyl-enemetalates. The cation and anion are well separated, which gives an unperturbed tetra-hedral anion as is expected for a formally Co(-I)d(10) metal center. The considerable elongation of the C=C bonds of the ethyl-ene ligands [average 1.401 (6) Å], relative to that of free ethyl-ene (1.333 Å), is consistent with metal→π* back-bonding models. One arm of the 2.2.2-cryptand (4,7,13,16,21,24-hexa-oxa-1,10-diaza-bicyclo-[8.8.8]hexa-cosa-ne) complexant is disordered and was modeled over two positions with a refined occupancy ratio of 0.559 (2):0.441 (2). In the crystal, the cationic K(2.2.2-cryptand) units are linked via C-H⋯O hydrogen bonds, forming inversion dimers. There are no other significant inter-molecular inter-actions in the crystal structure.

([2.2.2]Cryptand-κ(6)O)potassium (η(4)-cyclo-octa-diene)bis-(η(2)-pyrene)cobaltate(1-) pentane hemisolvate.

The cation, anion, and solvent in the title compound, [K(C(18)H(36)N(2)O(6))][Co(C(8)H(12))(C(16)H(10))(2)]·0.5C(5)H(12), are well separated. The pentane solvent mol-ecules are found in channels along [100] and were modeled as disordered over crystallographic inversion centers. Using the mid-points of the coordinated olefins, the angle between the C(py)/C(py)-Co-C(py)/C(py) and the C(cod)/C(cod)-Co-C(cod)/C(cod) planes (py is pyrene and cod is cyclo-octa-diene) is 67.6 (2)°. Thus, the overall geometry of the coordination sphere around cobalt is best described as distorted tetra-hedral.

Crystal structures of two novel iron isocyanides from the reaction of 2,6-di-methyl-phenyl isocyanide, CNXyl, with bis-(anthracene)ferrate(-1).

The reaction of the [K(18-crown-6)(thf)2]1+ (thf is tetra-hydro-furan) salt of bis-(anthracene)ferrate(-1), or [Fe(C14H10)2]-, with 2,6-di-methyl-phenyl isocyan-ide (CNX-yl) in thf resulted in the formation of two new iron isocyanide complexes, namely, [(1,2,3,4-η)-anthracene]tris-(2,6-di-methyl-phenyl isocyanide)iron, [Fe(C14H10)(C9H9N)3] or [Fe(1,2,3,4-η-C14H10)(CNX-yl)3], and {5,6-bis-(2,6-di-methyl-anilino)-3-(2,6-di-methyl-phen-yl)-1,2,7-tris-[(2,6-di-methyl-phen-yl)imino]-3-azoniahept-3-ene-1,4,7-triido}tris-(2,6-di-methyl-phenyl isocyanide)iron tetra-hydro-furan disolvate, [Fe(C54H56N6)(C9H9N)3]·2C4H8O or [Fe(C54H56N6)(CNX-yl)3]·2C4H8O, which were characterized by single-crystal X-ray diffraction. The former is likely an inter-mediate along the path to the known homoleptic [Fe(CNX-yl)5], while the latter contains a tridentate ligand that is formed from the 'coupling' of six CNXyl ligands. A third crystal structure from this reaction, (7-methyl-indol-1-ido-κN)(1,4,7,10,13,16-hexa-oxa-cyclo-octa-decane-κ6 O)potassium, [K(C9H8N)(C12H24O6)] or [K(C9H8N)(18-crown-6)], contains a 7-methyl-indol-1-ide anion, in which one CNXyl ligand has shed a proton during its reductive cyclization.

Syntheses and crystal structures of new naphthalene- and anthracene-vanadate salts and an unprecedented dimetallabis(anthracene) sandwich complex: [Na(tetrahydrofuran)3][V2(anthracene)2].

Reduction of bis(naphthalene)vanadium(0) by potassium naphthalene (KNp) in tetrahydrofuran (THF) provides a highly reactive, thermolabile, and so far unisolable brown substance, which affords the first reported derivatives of bis(naphthalene)vanadates. From these solutions, thermally stable (298 K) and structurally characterized compounds have been obtained, including dark-red rods of catena-poly[bis(µ3-η4:η6:η4-naphthalene)tetrakis(tetrahydrofuran)dipotassiumvanadium], [K2V(C4H8O)4(C10H8)2]n or [K(THF)2]2[V(C10H8)2] (3), and red plates of (4,7,13,16,21,24-hexaoxa-1,10-diazabicyclo[8.8.8]hexacosane)potassium [1,2-bis(dimethylphosphanyl)ethane]bis(η4-naphthalene)vanadium tetrahydrofuran monosolvate, [K(C18H36N2O6)][V(C10H8)2(C6H16P2)]·C4H8O or [K([2.2.2]cryptand)][V(C10H8)2(dmpe)]·THF [dmpe is 1,2-bis(dimethylphosphanyl)ethane] (4b). Notably, [V(C10H8)2]2- is the only example of a structurally authenticated homoleptic bis(arene)metallate dianion and was obtained by further reduction of the brown material by KNp in THF, in the presence of trimethylphosphane (PMe3). Addition of anthracene (An) to the brown material in THF afforded deep-violet and paramagnetic crystalline (1,4,7,10,13,16-hexaoxacyclooctadecane)bis(tetrahydrofuran)potassium [(η4-anthracene)(tetrahydrofuran)vanadium]-µ-η4:η2-anthracene-[(1,4,7,10,13,16-hexaoxacyclooctadecane)potassium]-µ-η2:η4-anthracene-[(η4-anthracene)(tetrahydrofuran)vanadium] tetrahydrofuran disolvate, [K(C12H24O6)(C4H8O)2][KV2(C12H24O6)(C4H8O)2(C14H10)4]·2C4H8O or [K(18-crown-6)][K(18-crown-6)(THF)2][V(C14H10)2(THF)]2·2(THF) (5), which readily reacted with PMe3 and dmpe to give new vanadate salts. These were structurally characterized as (1,4,7,10,13,16-hexaoxacyclooctadecane)bis(tetrahydrofuran)potassium bis(η4-anthracene)(trimethylphosphane)vanadium tetrahydrofuran monosolvate, [K(C12H24O6)(C4H8O)2][V(C14H10)2(C3H9P)]·C4H8O or [K(18-crown-6)(THF)2][V(C14H10)2(PMe3)]·THF (6), and tetrakis(1,2-dimethoxyethane)potassium bis(η4-anthracene)[1,2-bis(dimethylphosphanyl)ethane]vanadium, [K(C4H10O2)4][V(C14H10)2(C6H16P2)] or [K(DME)4][V(C14H10)2(dmpe)] (DME is 1,2-dimethoxyethane) (7b). The last three structures contain the first known bis(anthracene)vanadates and are thereby derivatives of the unknown bis(anthracene)vanadium(0). Attempts to obtain the sodium salt analog of 5 in THF resulted instead in the formation of a unique substance, (µ3-η6:η6:η6-anthracene)(µ2-η6:η6-anthracene)tris(tetrahydrofuran)sodiumdivanadium, [NaV2(C14H10)2(C4H8O)3] or [Na(THF)3][V2(C14H10)2] (8), containing the first reported dimetallabis(anthracene) sandwich compound.

Indication for surgery, the revised cardiac risk index, and 1-year mortality.

BACKGROUND: Patients who undergo vascular surgery are at increased risk of perioperative cardiovascular morbidity and mortality. The Revised Cardiac Risk Index (RCRI) is a validated and widely used bedside tool for estimating the risk of a perioperative major adverse myocardial event. We hypothesized that inclusion of the indication for surgery would add independent and prognostic information to the RCRI in predicting all-cause 30-day and 1-year mortality in open infrainguinal vascular surgical procedures. METHODS: This was a retrospective study of 603 patients who underwent open infrainguinal bypass vascular surgery between January 2002 and January 2008 at a tertiary care medical center. RCRI and indication for surgery were determined. The primary outcomes of interest were all-cause 30-day mortality (which included all in-hospital mortality, regardless of time) and all-cause 1-year mortality. RESULTS: Overall 30-day mortality was 32 (5.3%). Independent risk factors for early death were RCRI score, being of age ≥80 years, American Society of Anesthesiologists Physical Status classification = 4, and emergency surgery. Overall 1-year mortality, including early deaths, was 114 (18.9%). Indication for surgery, RCRI score, age, American Society of Anesthesiologists Physical Status classification = 4, female sex, and emergency surgery were all independent predictors of 1-year mortality. CONCLUSIONS: The RCRI score was associated with both 30-day and 1-year mortality in patients undergoing lower extremity bypass surgery. Indication for surgery was predictive of 1-year mortality but not of 30-day mortality.

Consensus statement: minimal criteria for reporting the systemic inflammatory response to cardiopulmonary bypass.

The lack of established cause and effect between putative mediators of inflammation and adverse clinical outcomes has been responsible for many failed anti-inflammatory interventions in cardiopulmonary bypass (CPB). Candidate interventions that impress in preclinical trials by suppressing a given inflammation marker might fail at the clinical trial stage because the marker of interest is not linked causally to an adverse outcome. Alternatively, there exist examples in which pharmaceutical agents or other interventions improve clinical outcomes but for which we are uncertain of any antiinflammatory mechanism. The Outcomes consensus panel made 3 recommendations in 2009 for the conduct of clinical trials focused on the systemic inflammatory response. This panel was tasked with updating, as well as simplifying, a previous consensus statement. The present recommendations for investigators are the following: (1) Measure at least 1 inflammation marker, defined in broad terms; (2) measure at least 1clinical end point, drawn from a list of practical yet clinically meaningful end points suggested by the consensus panel; and(3) report a core set of CPB and perfusion criteria that maybe linked to outcomes. Our collective belief is that adhering to these simple consensus recommendations will help define the influence of CPB practice on the systemic inflammatory response, advance our understanding of causal inflammatory mechanisms, and standardize the reporting of research findings in the peer-reviewed literature.

The Chatt reaction: conventional routes to homoleptic arenemetalates of d-block elements.

Joseph Chatt was the first to discover in the early 1960s that previously unknown transition metal compounds were accessible and isolable via the reactions of alkali metal arene radical anions with transition metal precursors containing good leaving groups, such as weakly basic neutral or anionic ligands, especially halides. Later Peter Timms confirmed the importance of these early studies with the synthesis of several new bis(arene)metal(0) sandwich compounds by a variant of Chatt's route. Following a brief historical survey of alkali metal arene compounds, first examined in some detail by Wilhelm Schlenk, use of these reagents in the conventional syntheses of anionic homoleptic arene metal complexes of the d-block elements will be described. In several cases these species are quite useful because they function as storable "naked" atomic metal anion reagents, especially in their reactions with carbon monoxide and isocyanides. In view of Chatt's seminal contributions to an often unique route to organometallic and inorganic compounds, it is proposed that this valuable synthetic method be named the "Chatt reaction" in honor of a giant of chemistry.

Correction: The Chatt reaction: conventional routes to homoleptic arenemetalates of d-block elements.

Correction for 'The Chatt reaction: conventional routes to homoleptic arenemetalates of d-block elements' by John E. Ellis et al., Dalton Trans., 2019, 48, 9538-9563.

Tantalum isocyanide complexes: TaI(CNDipp)6 (Dipp is 2,6-diisopropylphenyl) and ionic [Ta(CNDipp)7][Ta(CNDipp)6], a formal disproportionation product of the 17-electron Ta0 metalloradical Ta(CNDipp)6.

Treatment of tetraethylammonium hexacarbonyltantalate, [Et4N][Ta(CO)6], with 1.1 equivalents of molecular iodine (I2) in tetrahydrofuran (THF) at 200 K, followed by the addition of 6.0 equivalents of 2,6-diisopropylphenyl isocyanide (CNDipp) and slow warming to 293 K over a 24 h period gave the tantalum(I) iodide derivative hexakis(2,6-diisopropylphenyl isocyanide-κC)iodidotantalum(I), [TaI(C13H17N)6] or TaI(CNDipp)6, 1. Recrystallization of this substance from pentane provided deep-red nearly black parallelepipeds of the product, which was characterized by single-crystal X-ray diffraction. Addition of 1 in THF at 200 K to a suspension of an excess (5.8 equivalents) of caesium graphite (CsC8), followed by warming, filtration, and solvent removal, afforded a dark-green oily solid of unknown composition, from which several red-brown rhombohedral plates of the ditantalum salt heptakis(2,6-diisopropylphenyl isocyanide-κC)tantalum hexakis(2,6-diisopropylphenyl isocyanide-κC)tantalate, [Ta(C13H17N)7][Ta(C13H17N)6] or [Ta(CNDipp)7][Ta(CNDipp)6], 2, were harvested. Salt 2 is a unique substance, as it is the only known example of a salt containing a homoleptic cation, [MLx]+, and a homoleptic anion, [MLy]-, with the same transition metal and π-acceptor ligand L. In solution, 2 undergoes full comproportionation to afford the recently reported 17-electron paramagnetic zerovalent tantalum complex Ta(CNDipp)6, the only known isolable TaL6 complex of Ta0.