RESUMEN
BACKGROUND: As calcium silicate-based cements (CSCs) have found success in various vital pulp therapy applications, several new CSC products have emerged. This study aimed to assess the genotoxicity, cytotoxicity, and bioactivity of four CSCs by comparing the newly introduced materials Bio MTA+ and MTA Cem with previously studied materials, Biodentine and NeoMTA. METHODS: Genotoxicity was evaluated using the micronucleus (MN) assay in human peripheral blood lymphocyte cells, measuring MN frequency and nuclear division index (NDI). Cytotoxicity was assessed in human dental pulp stem cells through the Water-Soluble Tetrazolium Salt-1 (WST-1) colorimetric assay. Bioactivity was determined by ELISA, measuring the levels of angiogenic and odontogenic markers (BMP-2, FGF-2, VEGF, and ALP). Statistical analyses included ANOVA, Dunnet and Sidak tests, and Wald chi-square test. (p < .05). RESULTS: The MN frequency in the groups was significantly lower than that in the positive control group (tetraconazole) (p < .05). NDI values decreased with increasing concentration (p < .05). Bio MTA+ and NeoMTA showed decreased cell viability at all concentrations in 7-day cultures (p < .01). All materials increased BMP-2, FGF-2, and VEGF levels, with Biodentine and NeoMTA showing the highest levels of BMP-2 and FGF-2 on day 7. Biodentine displayed the highest VEGF levels on day 7. Biodentine and NeoMTA groups exhibited significantly higher ALP activity than the Bio MTA+ and MTA Cem groups by day 7. CONCLUSION: Bio MTA+ and MTA Cem demonstrated no genotoxic or cytotoxic effects. Moreover, this study revealed bioactive potentials of Bio MTA+ and MTA Cem by enhancing the expression of angiogenic and osteogenic growth factors.
Asunto(s)
Factor 2 de Crecimiento de Fibroblastos , Factor A de Crecimiento Endotelial Vascular , Humanos , Ensayo de Materiales , Óxidos/toxicidad , Compuestos de Calcio/toxicidad , Silicatos/toxicidad , Combinación de Medicamentos , Compuestos de Aluminio , Cementos Dentales/toxicidadRESUMEN
BACKGROUND: Due to the detrimental effect of blood contamination on the physico-chemical properties of mineral trioxide aggregate (MTA), obtaining an effective hemostasis in the surgical crypt during apical surgery is of paramount importance. The purpose of this in vivo study was to analyze the effect of Ankaferd Blood Stopper® (ABS) contamination on the biocompatibility of MTA. METHODS: Forty of 56 Wistar-Albino rats were divided randomly and equally into two groups (MTA and MTA-ABS) according to whether or not a hemostatic agent was used. The remaining 16 rats were designated as the control group. Rats in the experimental groups received freshly mixed MTA-Angelus in polyethylene tubes, which were inserted into monocortical bore holes created in their tibias. In the MTA-ABS group only, 0.5 mL of ABS solution was administered topically on the defect sites followed by implantation of MTA tubes. Inflammation, foreign-body reaction (FBR), necrosis, fibrosis, and new bone formation (NBF) were studied 7, 30, 60, and 90 days after implantation. RESULTS: On day7, statistically significant differences were found in tissue reactions with regard to NBF and necrosis (p = 0.044 and p = 0.024, respectively), the latter being observed in 40 % of the samples only in the MTA-ABS group. Slight inflammation in all groups was confined to day-7 only. Mild necrosis was present in the MTA-ABS group only on day-7. Severity of the foreign body reaction and fibrosis was limited. New bone formation increased gradually over time in all groups, reaching a maximum on day-90. CONCLUSIONS: MTA and ABS-contaminated MTA are equally biocompatible. ABS does not impair the properties of MTA.
Asunto(s)
Compuestos de Aluminio , Compuestos de Calcio , Hemostáticos , Óxidos , Extractos Vegetales , Silicatos , Animales , Bismuto , Combinación de Medicamentos , Ratas , Ratas WistarRESUMEN
BACKGROUND: The purpose of this study was to compare the fracture resistances of immature teeth treated with MTA along with root canal obturation methods using AH Plus, MetaSEAL, MTA Fillapex sealers + lateral compaction technique, and Unicore quartz fiber posts. MATERIALS AND METHODS: Fifty single-rooted maxillary anterior teeth were divided into five groups. The crowns were dissected and root canals were enlarged. #6 Peeso reamers were allowed to protrude 1 mm. beyond the apex to simulate immature teeth. The apical 4-5 mm of each tooth was filled using Angelus white MTA. The remaining portions of canals were obturated as follows: Group 1: No backfilling (control), Group 2: AH Plus + gutta-percha, lateral compaction, Group 3: MetaSEAL + gutta-percha, lateral compaction, Group 4: MTA Fillapex + gutta-percha, lateral compaction, Group 5: UniCore Fiber posts luted using PermaFlo DC. The specimens were embedded into self-curing acrylic poured into identical cylinders which were mounted on a jig providing a 45° angle. A compressive load increasing at 1 mm min(-1) was applied and the maximum load at which fracture occurred was recorded. Statistical analysis was performed using Kruskal-Wallis and Dunn's multiple tests. RESULTS: The highest fracture resistance was obtained with Group 5 (Fiber posts) whereas Group 4 (MTA Fillapex) yielded the lowest values. The mean fracture resistance value of Group 2 (AH Plus) was significantly higher than Group 4 (MTA Fillapex) (P = 0.001). The mean fracture value of Group 5 (Fiber posts) was significantly higher than Group 2 (AH Plus), Group 3 (MetaSEAL), and Group 4 (MTA Fillapex) (P = 0.02, 0.004, and 0.0001, respectively). CONCLUSION: Within the limitations of this study, UniCore quartz fiber posts provided the highest resistance. This methodology may specifically be advantageous for teeth with arrest of development at early stages, as these teeth are more susceptible to fracture owing to their excessively weak dentinal walls.
Asunto(s)
Materiales de Obturación del Conducto Radicular/química , Preparación del Conducto Radicular/métodos , Ápice del Diente/crecimiento & desarrollo , Fracturas de los Dientes/prevención & control , Raíz del Diente/química , Diente no Vital/terapia , Análisis del Estrés Dental , Humanos , Ápice del Diente/lesionesRESUMEN
BACKGROUND: Failure in the provision of inferior alveolar nerve block anesthesia (IANB) is a significant problem during endodontic treatment of irreversible pulpitis. Various methodologies have been advocated one of which is administration of premedication prior to anesthesia. Despite the considerable number of reports, the topic yet deserves more clarification. This systematic review was conducted to provide an oversight on the effectiveness of premedication prior to IANB in mandibular teeth. METHODS: A PubMed and Cochrane Database search was conducted by using MeSH terms inferior alveolar nerve block + pulpitis and mandibular anesthesia+pulpitis. Two reviewers independently performed the screening, selection of papers, and data extraction. Papers in English language that included randomized clinical studies on the impact of different medications on the success of inferior alveolar block anesthesia in irreversible pulpitis were included. Additionally, relevant supporting literature was also used where necessary. RESULTS: Initially, 118 papers were selected from PubMed and 68 were selected from Cochrane. Five additional articles were retrieved from Google Search. Following the elimination of duplicates and irrelevant articles, 35 studies were selected meeting the criteria. It was observed that there was moderate evidence to suggest that some premedications were partially effective for the enhancement of mandibular anesthetic effect in irreversible pulpitis. CONCLUSION: Though some medications appear to be promising, further supporting research will help highlight this significant topic which requires further clarification.
Asunto(s)
Nervio Mandibular/efectos de los fármacos , Premedicación , Pulpitis/tratamiento farmacológico , Anestesia de Conducción/métodos , Anestésicos Locales/uso terapéutico , Humanos , Nervio Mandibular/fisiopatología , Pulpitis/fisiopatologíaRESUMEN
OBJECTIVES: The aim was to compare the shaping ability of WaveOne reciprocating files with or without glide path in simulated curved S-shaped root canals. MATERIALS AND METHODS: Forty ISO #15, 0.02 taper, clear resin Endo Training Bloc-S blocks were studied. The simulated curved S-shaped canals were dyed using ink, preinstrumentation images were scanned, and resin blocks were prepared and divided into Group A: PathFile and WaveOne and Group B: WaveOne. All canals were postoperatively scanned. Pre- and postoperative images were superimposed and evaluated at 12 defined measuring points. The efficacy of the systems was compared based on the amount and direction of canal transportation, centering ability, amount of material removed, and presence of canal aberrations. Mann-Whitney U-test and independent t-test were used for statistical comparison. RESULTS: Both systems produced transportation at all levels and straightened the curved S-shaped canals. No significant differences in the amount and direction of transportation and amount of material removed were observed between the groups at each level (P > 0.05). However, Group A had significantly greater centering ability at the coronal straight zone (P = 0.018) and apical curvature (P = 0.014) levels than did Group B. Moreover, Group B showed more canal aberrations than did Group A. CONCLUSION: Within the limitations of the present study, the creation of a glide path with the PathFile system improved the centering ability of the WaveOne reciprocating file in the apical and straight coronal portions of the simulated curved S-shaped root canals and reduced the incidence of canal aberrations.
RESUMEN
The purpose of this study was to compare the incidence and longitudinal propagation of dentin defects after gutta-percha removal with hand and rotary instruments using microcomputed tomography. Twenty mandibular incisors were prepared using the balanced-force technique and scanned in a 19.9 µm resolution. Following filling with the lateral compaction technique, gutta-percha was removed with ProTaper Universal Retreatment (PTUR) or hand instruments. After rescanning, a total of 24,120 cross-sectional images were analyzed. The numbers, types, and longitudinal length changes of defects were recorded. Defects were observed in 36.90% of the cross sections. A total of 73 defects were comprised of 87.67% craze lines, 2.73% partial cracks, and 9.58% fractures. No significant difference in terms of new defect formation was detected between the retreatment groups. The apical and middle portions of the roots had more dentin defects than the coronal portions. Defects in three roots of the PTUR instrument group increased in length. Under the conditions of this in vitro study, gutta-percha removal seemed to not increase the incidence of dentin defect formation, but the longitudinal defect propagation finding suggests possible cumulative dentinal damage due to additional endodontic procedures. Hand and rotary instrumentation techniques caused similar dentin defect formation during root canal retreatment.
Asunto(s)
Instrumentos Dentales/efectos adversos , Restauración Dental Permanente/métodos , Dentina/ultraestructura , Microtomografía por Rayos X , Humanos , Incisivo , Propiedades de SuperficieRESUMEN
PURPOSE: This study evaluated the 5-year clinical performance of Dyract polyacid-modified resin composite material in Class III cavities. METHODS: 62 Class III cavities in 30 patients were restored with Dyract. Two experienced, calibrated examiners evaluated the restorations clinically at baseline and at 1-, 2-, 3-, 4-, and 5-year recalls, according to the modified Ryge criteria. RESULTS: After 5 years, a total of six restorations had failed and the cumulative failure rate was 94.6%. By the 5-year recall, one restoration was replaced due to pulpitis and five were replaced due to secondary caries. After 5 years, marginal discoloration was statistically significant (P= 0.0002).
Asunto(s)
Compómeros , Restauración Dental Permanente/métodos , Grabado Ácido Dental/métodos , Adolescente , Adulto , Anciano , Análisis de Varianza , Caries Dental/terapia , Fracaso de la Restauración Dental , Estudios de Seguimiento , Humanos , Persona de Mediana Edad , Estadísticas no Paramétricas , Análisis de Supervivencia , Factores de TiempoRESUMEN
This study evaluated the three-year clinical performance of Class V restorations made of a polyacid-modified resin composite, Dyract. Ninety-two Class V carious lesions in 28 patients were restored with Dyract. Restorations were clinically evaluated at baseline, first, second, and third year recall visits, according to the modified Ryge criteria by two experienced, calibrated examiners. Retention rate after three years in Class V carious restorations was 92.4%, with only seven failed restorations. Color change and marginal discoloration in restorations were found to be statistically significant (p = 0.013 and p < 0.001, respectively) at the end of third year, but none of the affected restorations required replacement. The results of this study revealed that at the end of three years, Dyract exhibited good clinical success rate but significant color change and marginal discoloration in Class V carious lesions.
Asunto(s)
Compómeros/química , Caries Dental/terapia , Restauración Dental Permanente/clasificación , Adolescente , Adulto , Anciano , Color , Recubrimiento Dental Adhesivo , Preparación de la Cavidad Dental/clasificación , Adaptación Marginal Dental , Retención de Prótesis Dentales , Fracaso de la Restauración Dental , Alisadura de la Restauración Dental , Estudios de Seguimiento , Humanos , Persona de Mediana Edad , Propiedades de Superficie , Resultado del TratamientoRESUMEN
Clinically, extraoral sinus tracts of endodontic origin may be confused with a wide variety of diseases. Thus, the differential diagnosis of this clinical dilemma is of paramount importance in providing appropriate clinical care because misdiagnosis of this condition may result in healing failure or unnecessary treatments. For this reason, a dental cause must be considered for any cutaneous sinus tract involving the face or neck. Its diagnosis is not always easy unless the treating clinician considers the possibility of its dental origin. Once the correct diagnosis is made, definitive treatment, through either tooth extraction or root canal therapy to eliminate the source of infection, is simple and effective.
RESUMEN
The purpose of this study was to evaluate the influence of Hero 642 rotary Ni-Ti instruments driven at 300, 400, or 600 rpm on root canal straightening, loss of working length, and instrument breakage. Sixty mesial root canals from extracted human mandibular molars were divided into 3 groups of 20 each and were instrumented at the aforementioned rotational speeds with a crown-down technique. Using a digital intraoral radiography system directly on the images of pre- and postoperative radiographs, degrees of canal curvatures were measured and recorded. Statistical analysis showed that final canal curvatures and working lengths were significantly reduced compared with those of original values in each group (p < 0.001). However, using Hero 642 rotary Ni-Ti system at different rotational speeds had no effect on canal curvature and working length alterations (p > 0.05). No file breakage was observed in any of the groups.
Asunto(s)
Instrumentos Dentales , Preparación del Conducto Radicular/instrumentación , Aleaciones Dentales , Cavidad Pulpar/anatomía & histología , Cavidad Pulpar/diagnóstico por imagen , Humanos , Diente Molar , Níquel , Radiografía Dental Digital , Rotación , TitanioRESUMEN
This study evaluated the three-year clinical performance of a polyacid-modified resin composite material, Dyract (DeTrey/Dentsply, Konstanz, Germany), in Class III cavities. Sixty-two Class III cavities in 30 patients were restored with Dyract. Restorations were clinically evaluated at baseline, one-, two- and three-year recalls according to the modified Ryge criteria by two experienced, calibrated examiners. After three years, the retention rate was 96.7%. At the one-year interval, one restoration had to be replaced due to sensitivity. At the two-year recall, one restoration, with a caries lesion adjacent to its margin, was clinically unacceptable and had to be replaced. Except for these two restorations, all other restorations were clinically acceptable in regard to color match, marginal discoloration, wear or loss of anatomical form, caries, marginal adaptation and surface texture after three years. At the end of three years, marginal discoloration was statistically significant (p=0.017) but did not require replacement of any of the restorations. Dyract exhibited significant marginal discoloration after three-year clinical performance in Class III cavities.
Asunto(s)
Compómeros/química , Caries Dental/terapia , Restauración Dental Permanente/clasificación , Metacrilatos/química , Silicatos/química , Adolescente , Adulto , Anciano , Color , Recubrimiento Dental Adhesivo , Caries Dental/clasificación , Preparación de la Cavidad Dental/métodos , Adaptación Marginal Dental , Alisadura de la Restauración Dental/clasificación , Restauración Dental Permanente/métodos , Sensibilidad de la Dentina/etiología , Estudios de Seguimiento , Humanos , Análisis por Apareamiento , Persona de Mediana Edad , Recurrencia , Estadística como Asunto , Estadísticas no Paramétricas , Propiedades de SuperficieRESUMEN
The aim of this in vitro study was to investigate if surface microhardness of Fuji IX GP, Vitremer, Dyract AP, and Prodigy is influenced by conditioning in aqueous solutions of lactic, orthophosphoric, citric, and acetic acids against bidistilled water (which was used as control). The pH values of acids used in this study were representative of dietary acids. All specimens were stored in bidistilled water for one week and then conditioned in the respective test solutions for another week. Citric (p<0.05) and acetic acids reduced, while lactic and orthophosphoric acids (p<0.05) increased the microhardness of both Fuji IX GP and Vitremer. On the other hand, microhardness of both Dyract AP and Prodigy was significantly reduced by all acidic media (p<0.05). The observed differences in the surface microhardness of various tooth-colored restorative materials conditioned in several media varied not only with the pH but also the nature of the acidic solution, and with the composition of the evaluated material.
Asunto(s)
Ácidos , Materiales Dentales , Restauración Dental Permanente , Dieta , Ácido Acético , Análisis de Varianza , Ácido Cítrico , Compómeros , Resinas Compuestas , Análisis del Estrés Dental , Cementos de Ionómero Vítreo , Dureza , Concentración de Iones de Hidrógeno , Ácido Láctico , Ensayo de Materiales , Ácidos Fosfóricos , Estadísticas no Paramétricas , Propiedades de SuperficieRESUMEN
The aim of this study was to assess the current status of mineral trioxide aggregate (MTA) as an educational material in dental schools in Turkey. A survey was sent to senior members of the endodontic departments of seventeen dental schools; fourteen responded. All respondents reported that they used MTA in their clinical practice, with apexification, perforations, retrograde fillings, and root resorptions being the most frequently occurring treatment procedures. All reported that information was given to students regarding MTA mainly as part of the curriculum. The third and fourth years were the periods when MTA was introduced to students in most of the schools. Twelve schools reported that students had the opportunity to observe procedures in which MTA was used, but students had the chance to use the material in a very minor proportion of the schools, mainly under the supervision of clinical instructors. Ten schools agreed that MTA should be included in the regular endodontic curriculum. Financial constraints seemed to be the predominant reason for those who answered this question negatively, followed by difficult handling properties and low radiopacity of the material. Within the limitations of this study, it can be concluded that ways should be sought to prevent financial difficulties from depriving dental students of the opportunity to receive information about contemporary methodologies such as MTA utilization.
Asunto(s)
Compuestos de Aluminio , Compuestos de Calcio , Curriculum , Educación en Odontología/métodos , Endodoncia/educación , Óxidos , Materiales de Obturación del Conducto Radicular , Silicatos , Apexificación , Difusión de Innovaciones , Combinación de Medicamentos , Educación en Odontología/economía , Endodoncia/economía , Humanos , Obturación Retrógrada , Resorción Radicular/terapia , Facultades de Odontología , Traumatismos de los Dientes/terapia , Raíz del Diente/lesiones , TurquíaRESUMEN
INTRODUCTION: The purpose of this in vitro study was to assess the influence of MetaSEAL and AH Plus on the resistance to vertical root fracture of endodontically treated teeth when either the matched-taper single-cone or lateral condensation technique was used. METHODS: Ninety extracted single-canal mandibular premolar teeth were sectioned, leaving a standard root length of 13 mm. The buccolingual and mesiodistal diameters were measured, and the teeth were randomly divided into 6 groups (n = 15). There were no statistically significant differences between the groups in terms of the diameters. In group 1, no instrumentation or obturation was performed. The rest of the roots were chemomechanically prepared with nickel-titanium ProTaper rotary instruments up to size F3 at the working length. Group 2 was left unobturated. Groups 3 and 4 were obturated with AH Plus used with the matched-taper single-cone and lateral condensation techniques, respectively. In groups 5 and 6, MetaSEAL was used instead of AH Plus. All of the roots were mounted vertically in self-curing acrylic resin blocks that exposed 8 mm of the coronal part. Then the roots were subjected to a vertical loading force (1 mm/min). The force required to produce a fracture was recorded in newtons. The data were analyzed by using Kruskal-Wallis and post hoc Dunn multiple comparison tests (P < .05). RESULTS: Although we did not detect statistical significance, there was a substantial difference between the fracture resistance values of the intact and instrumented but not obturated roots. The groups in which AH Plus and MetaSEAL were used with the matched-taper single-cone technique showed significantly higher fracture resistance values than the instrumented but not obturated roots (P < .05). There were no significant differences between the groups submitted to the matched-taper single-cone technique. The force required to fracture the roots in the group treated with AH Plus and the lateral condensation technique was similar to that required to fracture intact roots, whereas the group treated with MetaSEAL and the lateral condensation technique revealed comparable values to the instrumented but not obturated roots. CONCLUSIONS: When used with the matched-taper single-cone technique, MetaSEAL and AH Plus have the potential to reinforce endodontically treated teeth.
Asunto(s)
Metacrilatos/uso terapéutico , Materiales de Obturación del Conducto Radicular/uso terapéutico , Obturación del Conducto Radicular/métodos , Fracturas de los Dientes/fisiopatología , Raíz del Diente/fisiopatología , Diente no Vital/terapia , Diente Premolar , Análisis del Estrés Dental/instrumentación , Ácido Edético/uso terapéutico , Resinas Epoxi/uso terapéutico , Gutapercha/uso terapéutico , Humanos , Humedad , Ensayo de Materiales , Metacrilatos/química , Materiales de Obturación del Conducto Radicular/química , Irrigantes del Conducto Radicular/uso terapéutico , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Hipoclorito de Sodio/uso terapéutico , Estrés Mecánico , Temperatura , Factores de Tiempo , Diente no Vital/fisiopatologíaRESUMEN
OBJECTIVE: The objective of this study was to compare the shaping efficacy of 5 Ni-Ti rotary instruments with different cross-sectional designs in simulated S-shaped resin root canals. STUDY DESIGN: One hundred canals (n = 20) were instrumented to apical size 0.04/25 with ProFile, K3, NiTi-TEE, EndoWave, or HeroShaper. Pre- and postoperative images were superimposed. Width of resin removal was measured. Total amount of material removal, amount and direction of transportation, and centering ratios were determined. Data were analyzed using 1-way ANOVA and post hoc Tukey and Newman-Keuls multiple comparison tests. RESULTS: In terms of centering ratio and amount of transportation, ProFile followed by K3 gave the best results almost throughout the whole canal. However, ProFile created insufficient taper. Canals instrumented with the other 3 systems were transported and lacked flow. CONCLUSION: The K3 system, probably owing to its cross-sectional design and sequence encompassing a high number of instruments, seems under the conditions of this study to be a better choice in preparing S-shaped simulated root canals.
Asunto(s)
Aleaciones Dentales/química , Cavidad Pulpar/anatomía & histología , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Diseño de Equipo , Humanos , Ensayo de Materiales , Fotografía Dental , Propiedades de SuperficieRESUMEN
This report describes the 5-year clinical and radiographic follow-up of an accidental extrusion of a root canal filling material into the maxillary sinus and emphasizes the importance of monitoring of similar cases. The most favorable prognosis is achieved by surgically removing the extruded material from the sinus. Excess zinc oxide-eugenol-based materials in the sinus might cause aspergillosis sinusitis, and this entity often needs many years to develop. In this case, endomethasone was the filling material; however, the patient refused to undergo any surgical intervention. After a follow-up period of 5 years, the patient had no symptoms and radiographic examination disclosed no pathologic changes in the antrum.
Asunto(s)
Dexametasona/efectos adversos , Extravasación de Materiales Terapéuticos y Diagnósticos/complicaciones , Cuerpos Extraños/etiología , Formaldehído/efectos adversos , Hidrocortisona/efectos adversos , Seno Maxilar , Materiales de Obturación del Conducto Radicular/efectos adversos , Timol/análogos & derivados , Diente Premolar , Combinación de Medicamentos , Femenino , Estudios de Seguimiento , Humanos , Persona de Mediana Edad , Tratamiento del Conducto Radicular/efectos adversos , Timol/efectos adversosRESUMEN
This article reports the endodontic and surgical management and 12-month follow-up of a maxillary lateral incisor diagnosed as type III dens invaginatus. A 21-year-old male patient presented to our clinics with complaints of pain and swelling in the right maxillary region. Intraoral and radiographical examination disclosed the presence of a peg-shaped maxillary right lateral incisor diagnosed as type III dens invaginatus. Root canal treatment combined with periapical surgery was initiated. After the completion of root canal treatment for both maxillary right central and lateral incisors, periapical surgery was scheduled. During the surgery, periapical granulation tissue was curreted and bovine-derived hydroxil apatite (Unilab-Surgibone, Mississauga, Ontario, Canada) covered with collagen membrane (Unilab-Surgibone) was placed in the resorptive areas. ProRoot MTA (Dentsply, Tulsa, OK) was placed as a root end filling material. Postoperative 12-month follow-up revaled a satisfactory healing process.