Tracing and source fingerprinting of metals from the southern coastal sediments in Bangladesh.

Trace element pollution from anthropogenic sources is increasingly widespread. This pollution in terrestrial environments threatens agricultural crop production, while in aquatic environments, it threatens fish cultivation. The contamination of these crucial food sources raises significant concerns regarding food safety, security, and its potential adverse effects on human health. Coastal areas are particularly vulnerable to heavy metal pollution due to their proximity to industrial and urban centres, as well as their susceptibility to contamination from marine sources. In attempting to identify the sources of heavy metals (As, Cu, Cr, Cd, Fe, Hg, Mn, Ni, Pb, and Zn) and measure their contributions, we collected soil samples from thirty sites along the three coastal districts (Patuakhali, Barguna, and Bhola) in Bangladesh. Using atomic absorption spectroscopy, heavy metal concentrations in soil samples were measured and three receptor models (PMF, PCA-MLR, and UNMIX) were applied to detect their sources. Pairwise correlation analysis of metal concentrations in 30 sites across 3 coastal districts showed all possible patterns, including both significant and insignificant positive and negative relationships between different metals, except for As and Hg which did not display any significant relationships with other metals. The concentrations of Cu, Fe, Mn, Ni, and Zn exceed the US-EPA sediment quality standard. The applied PCA-MLR, PMF, and UNMIX models identified several sources of heavy metal contamination, including (i) mixed anthropogenic and natural activities: contribution of 59%, 37%, and 43%, and (ii) vehicle emissions: contribution of 23%, 26% and 29%. The recognized metal sources should be prioritised to avoid the discharge of poisonous pollutants from anthropogenic factors and any possible future exposure. This study's findings have implications for ongoing monitoring and management of heavy metal contamination in coastal environments to mitigate potential health and ecological impacts and can inform policy development and management strategies.

Biocontrol agents and their potential use as nano biopesticides to control the tea red spider mite (Oligonychus coffeae): A comprehensive review.

Tea red spider mite (TRSM), Oligonychus coffeae Nietner, is one of the major pests that cause considerable crop losses in all tea-growing countries. TRSM management often involves the use of multiple chemical pesticides that are linked to human health risks and environmental pollution. Considering these critical issues, employing biocontrol agents is a potential green approach that may replace synthetic pesticides. This review study aims to discuss the efficacy of plant extracts, entomopathogenic microorganisms, and predators in controlling TRSM. This study includes 44 botanical extracts, 14 microbial species, and 8 potential predators used to control TRSM, along with their respective modes of action. Most of the botanical extracts have ovicidal, adulticidal, and larvicidal activity, ranging from 80 to 100 %, attributed to bioactive compounds such as phenols, alcohols, alkaloids, tannins, and other secondary metabolites. Among microbial pesticides, Purpureocillium lilacinum, Metarhizium robertsii, Aspergillus niger, Pseudomonas fluorescens, and Pseudomonas putida are highly effective against TRSM without causing any harm to the nontarget beneficial insects. Besides, some predators, including green lacewings, ladybirds, and phytoseiid mites have the potential to control TRSM. Employing these biocontrol agents simultaneously in tea plantations could be more effective in preventing TRSM. Nevertheless, their high biodegradability rate, uneven distribution, and uncontrolled release pose challenges for large-scale field applications. This study also explores how nanotechnology can enhance sustainability by addressing the limitations of biopesticides in field conditions. This review study could contribute to the search for potential biocontrol agents and the development of commercial nano biopesticides to control TRSM.

Assessment of heavy metals migrated from food contact plastic packaging: Bangladesh perspective.

Plastic-based food-contact materials are potentially threatening the environment and public health by releasing toxic heavy metals. This study aimed to identify the types of plastic commonly used in Bangladesh as food-contact materials (FCMs) and assess the migration of heavy metals from these FCMs. Plastic types were identified using attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR), and 25 samples were selected based on the category, including Polyethylene Terephthalate (PET), Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), and Polycarbonate (PC). Distilled water, 3% acetic acid, and 15% ethanol were used as food simulants to assess the overall migration of chemicals at 70 °C for 2 h. The concentrations of heavy metals (Pb, Cd, Hg, Cr, and Sb) were analyzed using an Atomic Absorption Spectrophotometer (AAS). Results revealed that the highest overall migration occurred in coffee cups measuring 3.50 ± 0.17 mg/kg (using water simulant) and in yogurt containers with a measurement of 9.17 ± 0.1 mg/kg (using 3% acetic acid). The highest concentrations of Pb, Cd, Hg, Cr, and Sb were found in PP-2 (0.45 ± 0.01 mg/kg), PP-2 (0.36 ± 0.01 mg/kg), PC-5 (0.27 ± 0.01 mg/kg), PET-2 (0.12 ± 0.01 mg/kg), and PET-1 (0.09 ± 0.01 mg/kg), respectively. The concentration of heavy metals migrated from the containers is likely to induce a health risk due to bioaccumulation from long-term ingestion of food packaged in them. The findings of this study added knowledge about harmful heavy metals leached from the FCMs in Bangladesh.

Abundance, distribution and composition of microplastics in sediment and fish species from an Urban River of Bangladesh.

Microplastics (MPs) are a growing concern due to its ubiquitous presence and exceptional stability. We examined the abundance, dispersion, and attributes of MPs in the sediment and fish species of the Turag River in Bangladesh, which separated the industrial city Gazipur from the Mega-city Dhaka. Collected samples were digested and the chemical structure was identified using ATR-FTIR spectroscopy. The concentration of MPs in the sediment ranged from 10 to 35 particles kg-1, with a mean abundance of 19.2 ± 2.44 particles kg-1and MPs of the fragment type account for 34 % of all. The majority of MPs were discovered in the 3-5 mm size range. MPs concentrations in freshwater fish gut from the Turag River ranged from 0.63 ± 0.18 to 7.0 ± 1.1 microplastics individual-1. Fiber was found to be the most commonly ingested MPs type (43 %), followed by fragments (41 %), film (12 %), and foam (4 %). The most common type of MPs was transparent (34 %) followed by red (28 %), white (20 %), green (9 %) and black (8 %). The results showed that demersal (1.87 ± 0.39 items individual-1) and benthopelagic (1.5 ± 0.26 items individual-1) fish species had more MPs than pelagic fish (0.63 ± 0.18 items individual-1) species. Polypropylene (PP) was found to be the most dominant polymer type in the sediment sample, and PS (39 %) in the fish sample. Polyethylene (PE) was discovered to be 30 % and PP 25 % in sediment and fish samples, respectively. Other commonly detected polymer types include polyamide (PA), polystyrene (PS), cellulose acetate (CA), and polyethylene terephthalate (PET). In different sampling sites along the Turag River, the pollution load index (PLI) of MPs contamination was found to be in the risk level category I. The PLI values reflected the city's anthropogenic influence. The findings of the study could be used to establish a baseline for MPs pollution in Bangladesh's vast freshwater ecosystem.