Supporting the improvement of air quality management practices: The "FAIRMODE pilot" activity.

This paper presents the first outcomes of the "FAIRMODE pilot" activity, aiming at improving the way in which air quality models are used in the frame of the European "Air Quality Directive". Member States may use modelling, combined with measurements, to "assess" current levels of air quality and estimate future air quality under different scenarios. In case of current and potential exceedances of the Directive limit values, it is also requested that they "plan" and implement emission reductions measures to avoid future exceedances. In both "assessment" and "planning", air quality models can and should be used; but to do so, the used modelling chain has to be fit-for-purpose and properly checked and verified. FAIRMODE has developed in the recent years a suite of methodologies and tools to check if emission inventories, model performance, source apportionment techniques and planning activities are fit-for-purpose. Within the "FAIRMODE pilot", these tools are used and tested by regional/local authorities, with the two-fold objective of improving management practices at regional/local scale, and providing valuable feedback to the FAIRMODE community. Results and lessons learnt from this activity are presented in this paper, as a showcase that can potentially benefit other authorities in charge of air quality assessment and planning.

Estimation of the emissions by transport in two port cities of the northeastern Mediterranean, Greece.

Air pollution is one of the most important branches of environmental science as it affects human health, climate and ecosystems. Emissions of air pollutants from transport (vehicles and ships) in port cities strongly affect air quality at local scales, warranting for a combination of theoretical and experimental studies to identify pollution hotspots. The purpose of this paper is to provide a methodology for developing a hybrid emission inventory from transport sector for two port cities located respectively on the Northern Aegean islands of Chios and Lesvos. Emission inventories were constructed for the year 2014 based on top-down and bottom-up approaches. Official data from local authorities and survey results were used for the calculation of emissions. Traffic emissions were spatially allocated to the road network based on population data and hourly traffic counts, and distributed over time (on an hourly basis) with the use of local temporal coefficients. Regarding carbon monoxide road emissions, the highest quantities are mainly emitted by Passenger Cars (43%,32% in Chios and Lesvos respectively) while for PM10 emissions, trucks have the largest share (66% in Chios and 86% in Lesvos). The pollutants that are emitted in greater quantities from the ships at the ports of Mytilene and Chios are NOx, followed by SO2 and CO. Most of the ship emissions in the ports occur by the ships at berth, as they remain berthed for hours whereas maneuvering lasts 15-20 min. As for the daily contribution of the two transport sources to the pollution profile of Mytilene, road emissions are higher for almost all pollutants. However, the contribution of ship emissions is not negligible, especially during the touristic period when marine traffic increases and emissions close to the port area become more important than those from road transport.

Development of a road transport emission inventory for Greece and the Greater Athens Area: effects of important parameters.

Traffic is considered one of the major polluting sectors and as a consequence a significant cause for the measured exceedances of ambient air quality limit values mainly in urban areas. The Greater Athens Area (located in Attica), the most populated area in Greece, faces severe air pollution problems due to the combination of high road traffic emissions, complex topography and local meteorological conditions. Even though several efforts were made to construct traffic emission inventories for Greece and Attica, still there is not a spatially and temporally resolved one, based on data from relevant authorities and organisations. The present work aims to estimate road emissions in Greece and Attica based on the top down approach. The programme COPERT 4 was used to calculate the annual total emissions from the road transport sector for the period 2006-2010 and an emission inventory for Greece and Attica was developed with high spatial (6 × 6 km(2) for Greece and 2 × 2 km(2) for Attica) and temporal (1-hour) resolutions. The results revealed that about 40% of national CO2, CO, VOC and NMVOC values and 30% of NOx and particles are emitted in Attica. The fuel consumption and the subsequent reduction of annual mileage driven in combination with the import of new engine anti-pollution technologies affected CO2, CO, VOC and NMVOC emissions. The major part of CO (56.53%) and CO2 (66.15%) emissions was due to passenger cars (2010), while heavy duty vehicles (HDVs) were connected with NOx, PM2.5 and PM10 emissions with 51.27%, 43.97% and 38.13% respectively (2010). The fleet composition, the penetration of diesel fuelled cars, the increase of urban average speed and the fleet renewal are among the most effective parameters towards the emission reduction strategies.

Particulate matter pollution over a Mediterranean urban area.

The main purpose of this study is to investigate the aerosols' (PM10, PM2.5, and PM1) spatial and temporal distribution in different types of environment in a Mediterranean urban region, the Greater Athens Area based on data from a sampling campaign that took place during the cold and warm period of 2008. The influence of the atmospheric circulation patterns, the possible local transport mechanisms, as well as the differentiation of the PM behaviour from that of the inorganic pollutants (NOx, O3), are analysed and discussed. Furthermore, the Comprehensive Air Quality Model with extensions (CAMx) was applied for selected sampling dates and its results were evaluated against measurements in order to interpret qualitatively the configured picture of the air pollution above the GAA. Analysis of the measurement data show that local sources such as traffic and industry dominate over the prevailing PM loads, especially at the 'hot spot' areas. Moreover, the synoptic circulation patterns associated with calm conditions and southerly flows lead to high particulate pollution levels that also affect the urban background stations. Saharan dust outbreaks appeared to increase the particles' diameter as well as the number of E.U. limit value exceedances within the stations of our network. Without any dependence on the characteristics of the investigated atmosphere, PM1 always constituted the greatest part of the PM2.5 mass while PM10, especially during the Saharan dust episodes, was mainly constituted by the coarse fraction. The numerical modelling approach of the geographical distribution of PM10, PM2.5, NOx and O3 justified the design of the sampling campaign, indicating the need for the systematic and parallel monitoring and modelling of the pollutants' dispersion in order to understand the particulate pollution problem in the GAA and to aid to the formulation of pollution control strategies.