RESUMEN
INTRODUCTION: The purpose of this study was to evaluate the therapeutic effect of modified clear Twin Block (CTB) aligner and traditional twin block (TB) appliance from skeletal, dentoalveolar and soft tissue changes in adolescents with skeletal class II malocclusion. METHODS: A total of 80 adolescents, included in this study from two medical centres, were distributed into CTB group, TB group and control group based on the treatment they received. Lateral cephalograms at pre-treatment (T1) and post-treatment (T2) were measured by modified Pancherz's cephalometric analysis, and dentoskeletal and soft tissue changes were analysed by independent-sample t-test, paired-sample t-test, ANOVA test and Scheffe's Post Hoc test. RESULTS: Seventy-five adolescents completed the study, including 32 in the CTB group, 32 in the TB group and 11 in the control group. Both CTB and TB treatment showed significant differences in most dentoskeletal and soft tissue measurements. Compared with the control group, improvements were observed in class II molar relationship through significant different in S Vert/Ms-S Vert/Mi in the CTB group (P < .01) and the TB group (P < .001), as well as deep overjet through significant different in S Vert/Is-S Vert/Ii in the CTB group (P < .001) and the TB group (P < .001). Besides, the CTB group also showed less protrusion of lower incisors and resulted in a more significant improvement in profile with fewer adverse effects on speaking, eating and social activities. CONCLUSIONS: For adolescents with skeletal class II malocclusion, CTB appliance was as effective as TB on improving dentoskeletal and soft tissue measurements, featuring more reliable teeth control and patient acceptance.
Asunto(s)
Cefalometría , Maloclusión Clase II de Angle , Humanos , Maloclusión Clase II de Angle/terapia , Maloclusión Clase II de Angle/diagnóstico por imagen , Adolescente , Masculino , Femenino , Diseño de Aparato Ortodóncico , Resultado del Tratamiento , Técnicas de Movimiento Dental/instrumentación , Técnicas de Movimiento Dental/métodos , Niño , Mandíbula/patología , Maxilar/patología , Aparatos Ortodóncicos RemoviblesRESUMEN
OBJECTIVES: This study was designed to determine the optimal anterior-posterior (AP) position of upper incisors through Anterior Nasal Spine (ANS) point. MATERIALS AND METHODS: Lateral cephalometric radiographic images of 690 patients were collected and divided into a derivation group and a validation group, and the former were subdivided into a proper AP position (PAP) group and an improper AP position (iPAP) group. The distance from facia-axis (FA) point of upper incisors to the line perpendicular to Frankfort horizontal (FH) plane through ANS (FA-ANS) was measured, and the relationship between FA-ANS and several cephalometric indices were studied through Pearson correlation analysis. Receiver operating characteristic (ROC) curves for different clinical indices were analyzed to evaluate the diagnostic efficiency of optimal AP position of upper incisors. RESULTS: The average value of FA-ANS in PAP group was 0.57±1.99, which was significantly different from FA-ANS in iPAP group. Cephalometric indices such as U1-NA, U1-SN, AB-NPo, UL-TVL, Wits, and ANB were found to be correlated with FA-ANS. The receiver operating characteristic (ROC) curves represented a greater diagnostic efficiency of FA-ANS compared with other clinical indices. CONCLUSIONS: ANS point, as a stable skeletal landmark, could be used to access an optimal AP position of upper incisors, providing aids to clinical diagnosis and treatment goal determination for clinical practice. CLINICAL RELEVANCE: A new index FA-ANS, together with other traditional indices, could help determine the optimal position of upper incisors and provide a personalized therapeutic plan.
RESUMEN
OBJECTIVES: The prediction of posttreatment outcomes is conducive to the final determination of ideal therapeutic options. However, the prediction accuracy in orthodontic class III cases is unclear. Therefore, this study conducted exploration on prediction accuracy in orthodontic class III patients using the Dolphin® software. MATERIALS AND METHODS: In this retrospective study, lateral cephalometric radiographs of pre- and posttreatment were collected from 28 angle class III adults who received completed non-orthognathic orthodontic therapy (8 males, 20 females; mean age = 20.89 ± 4.26 years). The values of 7 posttreatment parameters were recorded and inserted into the Dolphin® Imaging software to generate a predicted outcome, and then the prediction radiograph and actual posttreatment radiograph were superimposed and compared in terms of soft tissue parameters and landmarks. RESULTS: The prediction showed significant differences with the actual outcomes in nasal prominence (the difference between the prediction and the actual value was - 0.78 ± 1.82 mm), the distance from the lower lip to the H line (0.55 ± 1.11 mm), and the distance from the lower lip to the E line (0.77 ± 1.62 mm) (p < 0.05). Point subnasale (Sn) (an accuracy of 92.86% in the horizontal direction and 100% in the vertical direction in 2 mm) and point soft tissue A (ST A) (an accuracy of 92.86% in the horizontal direction and 85.71% in the vertical direction in 2 mm) were proven to be the most accurate landmarks, while the predictions in the chin region were relatively inaccurate. Furthermore, the predictions in the vertical direction were of higher accuracy compared to the horizontal direction except for the points around the chin. CONCLUSIONS: The Dolphin® software demonstrated acceptable prediction accuracy in midfacial changes in class III patients. However, there were still limitations for changes in the chin and lower lip prominence. CLINICAL RELEVANCE: Clarifying the accuracy of Dolphin® software in predicting soft tissue changes of orthodontic class III cases will facilitate physician-patient communication and clinical treatment.
Asunto(s)
Delfines , Maloclusión de Angle Clase III , Masculino , Femenino , Animales , Cara/anatomía & histología , Estudios Retrospectivos , Mentón/anatomía & histología , Programas Informáticos , Labio/diagnóstico por imagen , Cefalometría/métodos , MandíbulaRESUMEN
BACKGROUND: An ideal relationship of anterior teeth is closely related to postoperative function, stability, and aesthetics. Therefore, it is necessary to estimate the proportion of anterior teeth when communicating with patients about possible treatment plans and outcomes. This study aimed to establish a simple method for assessing the proportion of anterior teeth and to identify the standard ratio value to provide references for clinical work. METHODS: Five hundred fourteen patients were divided into derivation, standard, and validation datasets. We first deduced our novel simplified anterior tooth ratio (SATR) by finding the key teeth with the derivation datasets, then established standard values by measuring the standard models, and finally validated the diagnostic performance of SATR. Independent sample t-test was used to select key teeth. Pearson's correlation analysis and linear regression analysis was used to test and verify the correlation between SATR and the anterior Bolton ratio. Chi-square test and diagnostic test were used to verify the diagnostic results using SATR. P values of < 0.05 were considered statistically significant. RESULTS: Patients with an abnormal anterior Bolton ratio were more likely to have variations in the maxillary and mandibular lateral incisors. Therefore, the ratio of maxillary and mandibular lateral incisors was chosen as a simple way to assess the anterior tooth ratio and was defined as SATR (simplified anterior tooth ratio). A positive correlation was observed between SATR and anterior Bolton ratio (r = 0.702, p < 0.001), with the linear regression equation as follows: y = 0.503 + 0.328x, x = SATR, y = anterior Bolton ratio. The standard value of SATR was established (85.69% ± 3.57%) and proven reliable in clinical practice. CONCLUSIONS: The ratio of maxillary and mandibular lateral incisors can be used to estimate the anterior tooth ratio, which showed high reliability and efficiency.
Asunto(s)
Incisivo , Maxilar , Humanos , Odontometría , Reproducibilidad de los Resultados , Incisivo/anatomía & histología , EtnicidadRESUMEN
Elevated glucose levels, multiple pro-inflammatory cytokines and the generation of excessive reactive oxygen species (ROS) are pivotal characteristics within the microenvironments of chronic periodontitis with diabetes mellitus (CPDM). Control of inflammation and modulation of immune system are required in the initial phase of CPDM treatment, while late severe periodontitis requires a suitable scaffold to promote osteogenesis, rebuild periodontal tissue and reduce alveolar bone resorption. Herein, a whole-course-repair system is introduced by an injectable hydrogel using phenylboronic acid functionalized oxidized sodium alginate (OSA-PBA) and carboxymethyl chitosan (CMC). Epigallocatechin-3-gallate (EGCG) was loaded to simultaneously adjust the mechanical property of the OSA-PBA/CMC + EGCG hydrogel (OPCE). This hydrogel has distinctive adaptability, injectability, and ROS/glucose-triggered release of EGCG, making it an ideal drug delivery carrier. As expected, OPCE hydrogel shows favourable antioxidant and anti-inflammatory properties, along with a regulatory influence on the phenotypic transition of macrophages, providing a favourable immune microenvironment. Apart from that, it provides a favourable mechanical support for osteoblast/osteoclast differentiation regulation at the late proliferation stage of periodontal regeneration. The practical therapeutic effects of OPCE hydrogels were also confirmed when applied for treating periodontitis in diabetic rats. In summary, OPCE hydrogel may be a promising whole-course-repair system for the treatment of CPDM.
Asunto(s)
Catequina , Periodontitis Crónica , Diabetes Mellitus Experimental , Sistemas de Liberación de Medicamentos , Glucosa , Especies Reactivas de Oxígeno , Glucosa/metabolismo , Especies Reactivas de Oxígeno/metabolismo , Periodontitis Crónica/complicaciones , Periodontitis Crónica/tratamiento farmacológico , Diabetes Mellitus Experimental/complicaciones , Animales , Ratas , Catequina/administración & dosificación , Catequina/análogos & derivados , Catequina/farmacología , Catequina/uso terapéutico , Reología , Hidrogeles , Antioxidantes/metabolismo , Macrófagos/efectos de los fármacos , Inflamación/tratamiento farmacológico , Osteoclastos/citología , Osteoblastos/citología , Diferenciación Celular , Regeneración Ósea/efectos de los fármacos , Microtomografía por Rayos X , Pérdida de Hueso Alveolar/tratamiento farmacológico , Sistemas de Liberación de Medicamentos/métodos , Alginatos , Bases de Schiff , Masculino , Ratas Sprague-Dawley , Células RAW 264.7 , RatonesRESUMEN
Bone formation and deposition are initiated by sensory nerve infiltration in adaptive bone remodeling. Here, we focused on the role of Semaphorin 3A (Sema3A), expressed by sensory nerves, in mechanical loads-induced bone formation and nerve withdrawal using orthodontic tooth movement (OTM) model. Firstly, bone formation was activated after the 3rd day of OTM, coinciding with a decrease in sensory nerves and an increase in pain threshold. Sema3A, rather than nerve growth factor (NGF), highly expressed in both trigeminal ganglion and the axons of periodontal ligament following the 3rd day of OTM. Moreover, in vitro mechanical loads upregulated Sema3A in neurons instead of in human periodontal ligament cells (hPDLCs) within 24 hours. Furthermore, exogenous Sema3A restored the suppressed alveolar bone formation and the osteogenic differentiation of hPDLCs induced by mechanical overload. Mechanistically, Sema3A prevented overstretching of F-actin induced by mechanical overload through ROCK2 pathway, maintaining mitochondrial dynamics as mitochondrial fusion. Therefore, Sema3A exhibits dual therapeutic effects in mechanical loads-induced bone formation, both as a pain-sensitive analgesic and a positive regulator for bone formation.
Asunto(s)
Osteogénesis , Semaforina-3A , Humanos , Remodelación Ósea , Diferenciación Celular , Semaforina-3A/metabolismo , Semaforina-3A/farmacología , Ganglio del Trigémino/metabolismoRESUMEN
Background: The mechanisms and effects of the interplay between the nerves and skeleton remain a popular research topic. This study aimed to analyze and evaluate publications on nerve-bone interactions using bibliometrics and to identify the state of the art of current research, hotspots, and future directions. Methods: This study included 1989 articles and reviews from the Web of Science Core Collection (WoSCC) published from January 1, 1991, to June 22, 2022. The Bibliometrix package of R 4.2.0 (The R Foundation for Statistical Computing, Vienna, Austria) was used to analyze basic information about the publications, including the annual number of publications, institution analysis, author influence analysis, journal analysis, and the national cooperation network. We also used CiteSpace 5.8.R3 for bibliometric analysis, including co-occurrence, co-citation, and cluster analysis. Results: We discovered a significant increase in the number of articles on nerve-bone interactions published over the last 10 years. The most active country and institution were the United States and the University of Minnesota, respectively. In terms of journals and cocited journals, Bone was ranked highest with respect to the number of publications, while Journal of Bone and Mineral Research was ranked highest among cited journals. Wang Lei was the author with the most publications, and Bjurholm A was the most cited author. The analysis of references and keywords revealed that the impact of nerve- and neuromodulation-related factors on stem cell differentiation was a persistently hot topic. Osteoarthritis, neuropeptide Y, and osteoclastogenic process are likely to be the next era of research hotspots. The neurovascular crosstalk within bone has received great attention, especially in skeletal diseases, which may provide potential targets for future treatments. Conclusions: We used a bibliometric method to provide an efficient, objective, and comprehensive assessment of existing research about the interplay between the skeletal and nervous systems and to accurately identify hotspots and research frontiers, providing valuable information for future research.
RESUMEN
OBJECTIVES: Cephalometric analysis is essential for diagnosis, treatment planning and outcome assessment of orthodontics and orthognathic surgery. Utilizing artificial intelligence (AI) to achieve automated landmark localization has proved feasible and convenient. However, current systems remain insufficient for clinical application, as patients exhibit various malocclusions in cephalograms produced by different manufacturers while limited cephalograms were applied to train AI in these systems. METHODS: A robust and clinically applicable AI system was proposed for automatic cephalometric analysis. First, 9870 cephalograms taken by different radiography machines with various malocclusions of patients were collected from 20 medical institutions. Then 30 landmarks of all these cephalogram samples were manually annotated to train an AI system, composed of a two-stage convolutional neural network and a software-as-a-service system. Further, more than 100 orthodontists participated to refine the AI-output landmark localizations and retrain this system. RESULTS: The average landmark prediction error of this system was as low as 0.94 ± 0.74 mm and the system achieved an average classification accuracy of 89.33%. CONCLUSIONS: An automatic cephalometric analysis system based on convolutional neural network was proposed, which can realize automatic landmark location and cephalometric measurements classification. This system showed promise in improving diagnostic efficiency in clinical circumstances.
Asunto(s)
Inteligencia Artificial , Maloclusión , Humanos , Cefalometría , Redes Neurales de la Computación , RadiografíaRESUMEN
BACKGROUND: Lateral cephalometric radiograph (LCR) is crucial to diagnosis and treatment planning of maxillofacial diseases, but inappropriate head position, which reduces the accuracy of cephalometric measurements, can be challenging to detect for clinicians. This non-interventional retrospective study aims to develop two deep learning (DL) systems to efficiently, accurately, and instantly detect the head position on LCRs. METHODS: LCRs from 13 centers were reviewed and a total of 3000 radiographs were collected and divided into 2400 cases (80.0 %) in the training set and 600 cases (20.0 %) in the validation set. Another 300 cases were selected independently as the test set. All the images were evaluated and landmarked by two board-certified orthodontists as references. The head position of the LCR was classified by the angle between the Frankfort Horizontal (FH) plane and the true horizontal (HOR) plane, and a value within - 3°- 3° was considered normal. The YOLOv3 model based on the traditional fixed-point method and the modified ResNet50 model featuring a non-linear mapping residual network were constructed and evaluated. Heatmap was generated to visualize the performances. RESULTS: The modified ResNet50 model showed a superior classification accuracy of 96.0 %, higher than 93.5 % of the YOLOv3 model. The sensitivity&recall and specificity of the modified ResNet50 model were 0.959, 0.969, and those of the YOLOv3 model were 0.846, 0.916. The area under the curve (AUC) values of the modified ResNet50 and the YOLOv3 model were 0.985 ± 0.04 and 0.942 ± 0.042, respectively. Saliency maps demonstrated that the modified ResNet50 model considered the alignment of cervical vertebras, not just the periorbital and perinasal areas, as the YOLOv3 model did. CONCLUSIONS: The modified ResNet50 model outperformed the YOLOv3 model in classifying head position on LCRs and showed promising potential in facilitating making accurate diagnoses and optimal treatment plans.
Asunto(s)
Aprendizaje Profundo , Estudios Retrospectivos , Radiografía , Cefalometría/métodos , CaraRESUMEN
BACKGROUND: The development of the mandible largely determines the sagittal and vertical lateral appearance. The gonial angle (Articulare-Gonion-Menton, Ar-Go'-Me), as a composite indicator, represents the growth direction of the mandible. We proposed a method based on the Frankfort horizontal (FH) plane and its vertical plane (VFH) to divide the gonial angle into sagittal and vertical components (Articulare-Gonion-VFH / Menton-Gonion-FH, Ar-Go'-VFH / Me-Go'-FH) and to compare the accuracy of diagnosing the development of the mandible and maxillofacial structures with other methods. METHODS: Lateral cephalometric films from 736 volunteers aged 6-30 years were collected and analyzed for cephalometric measurements. Four groups of segmentation-based angle, including the FH-based segmentation (Ar-Go'-VFH / Me-Go'-FH), the SN-based segmentation (Articulare-Gonion- Sellion-Nasion plane' vertical plane/ Menton-Gonion- Sellion-Nasion plane, Ar-Go'-VSN / Me-Go'-SN), the Go'-S based segmentation(Articulare-Gonion-Sellion / Menton-Gonion-Sellion, Ar-Go'-S / Me-Go'-S), and the Go'-N based segmentation (Articulare-Gonion-Nasion / Menton-Gonion-Nasion, Ar-Go'-N / Me-Go'-N), as well as commonly used sagittal and vertical indices were measured. Pearson correlation analysis was used to show the representativeness of different segmentation methods on the mandibular growth direction. RESULTS: As the gonial angle decreased with age, all the segmentation-based metrics decreased. The plane-based segmentation metrics, including Ar-Go'-VFH / Me-Go'-FH, Ar-Go'-VSN / Me-Go'-SN, were superior to the point-based segmentation metrics (Ar-Go'-S / Me-Go'-S, and Ar-Go'-N / Me-Go '-N) in evaluating vertical and sagittal development of the mandible. The sagittal indicators displayed alteration of ramus and condyle, while these vertical indicators responded to the alteration of the mandibular corpus and gonial angle. CONCLUSIONS: The gonial angle should be clinically segmented with planes (including SN plane and FH plane) rather than points (including Go'-S and Go'-N) to assess mandibular development. The FH plane-based segmentation method facilitated chair-side diagnosis of the mandibular growth direction.
Asunto(s)
Mandíbula , Adolescente , Adulto , Cefalometría/métodos , Niño , Humanos , Mandíbula/diagnóstico por imagen , Estudios Retrospectivos , Adulto JovenRESUMEN
Osteoporosis is a widespread disease characterized by bone mass loss and microarchitectural deterioration. The side effects of clinical drugs make mesenchymal stem cells (MSCs)-based therapy gain increasing focus in the treatment of osteoporosis. MSCs need to migrate to the site of damage and undergo differentiation in order to participate in the subsequent bone repair process. Therefore, the homing ability of MSCs may be related to the repair ability. Here, we proposed a novel method to screen MSCs with high migration capacity and confirmed that these MSCs exhibited higher osteogenic differentiation ability both in vivo and in vitro. Further results indicated that MSCs with high migration ability could partly rescue the bone loss of ovarectomized (OVX) rats. Higher expression of Platelet-derived growth factors receptor ß- (PDGFRß) and more nuclear transduction of ß-catenin in MSCs with high migration ability may be responsible for biological functions. This article may provide a method to improve the efficacy of MSCs-based therapy in the clinic.