The Effects of a Cool Saline Solution Irrigation on Mandibular Third Molar Extraction Site: A Postoperative Split-Mouth Evaluation.

OBJECTIVE: This study aimed to evaluate the effects of sterile saline solution irrigation (lavage) performed after mandibular third molar extraction on postoperative complications, utilizing a split-mouth randomized clinical trial design. METHODS: Seventeen healthy participants requiring bilateral mandibular third molar extraction were enrolled in this single-center study. In each participant, one impacted third molar was designated as the experimental group and subjected to saline lavage at 4 °C. In contrast, the control group was the other impacted third molar, undergoing saline lavage at 25 °C. Various parameters, including postoperative pain, mouth opening, and facial swelling, were assessed using standardized measures and three-dimensional facial scanning at multiple time points. RESULTS: The average age of participants was 26.66 ± 4.1 years, with no postoperative complications observed in either group. The duration of surgery did not significantly differ between groups. Postoperative pain was significantly reduced in the experimental group during the immediate postoperative period compared with the control group, but this difference diminished over time. No significant differences were observed in mouth opening or facial swelling between groups at any time. CONCLUSION: In site 4 °C, sterile saline solution irrigation after mandibular third molar extraction may effectively reduce early postoperative complications, particularly pain, without prolonging surgical duration.

An Experimental Anatomic CBCT Study on the Correlations Between MB1 and MB2 of the Mesio-Vestibular Root of the Upper First Molars.

This experimental anatomic study aimed to investigate the correlations between the mesio-vestibular canal (MB1) and the second mesio-vestibular canal (MB2) of the mesio-vestibular root of the upper sexts using cone-beam computed tomography (CBCT) imaging. A total of 24 extracted maxillary first molars were collected and subjected to CBCT imaging. The presence, location, and morphology of MB1 and MB2 canals were evaluated using axial, coronal, and sagittal CBCT sections. The interrelation between MB1 and MB2 canals was assessed, including their separate canals, merging, and division points. Among the 24 maxillary first molars examined, 86.5% demonstrated the presence of an MB2 canal in addition to MB1. The MB2 and MB1 were confluent in 80% of the cases with a confluent height of 4,16 mm. The mean distance between MB1 and MB2 canals was 1.85 mm. This study provides detailed information on the anatomic correlations between MB1 and MB2 canals of the mesio-vestibular root in the upper sexts using CBCT imaging. The high prevalence of MB2 canals suggests their significance in endodontic procedures and emphasizes the importance of thorough exploration and identification during root canal treatment. The knowledge of the location and morphology of these canals can aid in successful endodontic therapy and enhance treatment outcomes.

Clinical Efficacy of Concentrated Growth Factors for the Management of Marginal Tissue Recession: A Systematic Review and Meta-Analysis.

INTRODUCTION: To systematically review existing scientific literature to determine, compare, and evaluate whether concentrated growth factors (CGF) or connective tissue grafts (CTG) is a better treatment alternative for patients with marginal tissue recession (MTR). METHODS: Electronic databases like PubMed, Embase, Scopus, and Google Scholar were screened from the last 20 years reporting treatment of MTR using CGF or CTG and other techniques. Periodontal parameters like probing depth, clinical attachment level, recession depth, recession width, keratinized tissue width, root coverage, increase in gingival thickness and plaque index, and gingival index were compared. Standardized mean difference was used as a summary statistic measure with a random effect model and P value <0.05 as statistically significant. RESULTS: Six studies fulfilled eligibility criteria and were included in qualitative synthesis, of which only 4 studies were suitable for meta-analysis. The pooled estimate through standardized mean difference signifies that CGF was superior to CTG in the reduction of probing depth, gingival index, and plaque index and gain in clinical attachment level while CTG was superior in reducing the recession depth and recession width. Both the procedures had an overall equal effect on keratinized tissue width and root coverage, but these differences were statistically insignificant (P>0.05). Publication bias through the funnel plot showed symmetric distribution without systematic heterogeneity. CONCLUSION: The present study suggests that treatment of MTR with CTG or CGF resulted in clinically favorable outcomes, but no statistically significant differences was observed between these 2 procedures regarding the outcome.

The influence of orthopedic rapid maxillary expansion on the deviation of the nasal septum.

Nasal septal deviation (NSD) is one of the most common abnormalities impacting the maxillofacial development of children. Herein, we investigated the impact of orthopedic rapid maxillary expansion (RME) on the nasomaxillary complex and NSD in pediatric patients. The study sample consisted of a total of 40 patients divided into two groups. The experimental group included 26 patients (13 females and 13 males) with skeletal maxillary transversal constriction and NSD greater than 1 mm, while the control group comprised 14 patients (6 females and 8 males) with skeletal maxillary transversal constriction but no NSD. All the patients were treated for approximately 15 days with the tooth-tissue born RME device. The activation procedure was to turn the transversal Hyrax screw a quarter turn, twice a day. After that, the device was left in place for a period of five months to facilitate passive retention. Radiographic analysis was performed on posteroanterior (PA) cephalometric radiographs taken at pre-expansion (T1) and post-expansion (T2). The data were evaluated using the Mann-Whitney U and Wilcoxon Sign tests. The experimental group showed a statistically significant decrease (p < 0.05) in the distance from the axis of symmetry to middle of nasal septum (SNM-mid) and to inferior part of the nasal septum (SNI-mid) measurements, indicating a reduction in NSD. Additionally, both experimental and control groups showed a statistically significant increase (p < 0.05) in maxillofacial measurements, including the distance between the nose length (X-SNM and SNM-SNAC), width of the nasal cavity (Pir L-R), basal maxillary width (Mx L-R), vestibular cuspid of upper first molars (CVM + L-R) and lower first molars (CVM-L-R). Based on the study findings, RME was considered effective in achieving craniofacial improvement in pediatric patients with NSD, which positively impacted their healthy growth and development. The improvement in the nasomaxillary complex was similar between genders.

Dental problems in children with autism: a 5-year study.

Caries experience of children and complex clinical circumstances are an actual challenge for any healthcare professional. To investigate the early childhood caries (ECC) in autistic and non autistic children (≤4 years of age) evaluating the amount of dental damage and the treatments carried out in both groups. Data regarding the oral health status of 40 patients (≤4 years of age) were assembled. The sample group was constituted of 20 autistic children (12 males with a mean age of 2.5 years and 8 females with a mean age of 3.2 years) whereas 20 patients without the autistic spectrum represented the control group (11 males with a mean age of 3 and 9 females with a mean age of 3.3 years). There were no significant differences between the two groups as regards both the extent of dental damage and the treatments carried out. About the frequency, in the autistic group, the most frequent caries were the white spots and enamel proximal lesions (2.2%), followed by only white spots (1.2%) and brown-black cavities and root stumps (0.6%). In the control group, the brown-black cavities and root stumps represented the most frequent findings (2.2%), followed by white spots and enamel proximal lesions (1.4%) and white spots (0.4%). Regarding the treatments, the most repeated management of dental damage among autistic patients was composite restorations (2.2%) while in nonautistic patients were tooth extractions (2%).

Digital Protocol to Record Occlusal Analysis in Prosthodontics: A Pilot Study.

Background: Digital technologies enable the accurate replication of occlusion, which is pivotal for stability in maximum intercuspation and dynamic occlusion. CAD softwares generates standardized occlusal morphologies requiring significant adjustments. The consideration of individual mandibular movements during restoration leads to better functional integration. This pilot study evaluates the efficacy of a novel, fully digital protocol for occlusal analysis recording in prosthodontics. Methods: Patients needing single or multiple metal-free restorations were included. Teeth underwent horizontal finish line preparation, while restorations on implants were either directly screwed or used multi-unit abutments. A digital impression (Trios 3 Intraoral Scanner) captured the mouth's elements. Dynamic occlusion was recorded via Patient Specific Motion (PSM). After the placement and functionalization of temporary restorations, subsequent scans included various elements, and CAD software (Dental system) was used for the restoration design. Restorations were milled in monolithic zirconia, pressed from CAD/CAM-milled wax, and sintered. Results: An evaluation of 52 restorations in 37 patients indicated high accuracy in restorations manufactured via the fully digital workflow. Monolithic zirconia was predominantly used. Subtractive (17.3%) and additive (7.7%) occlusal adjustments were mainly chairside. Conclusion: This study underscores the efficacy of meticulous verification measures and a centric contact system in reducing the need for clinical occlusal refinements in prosthetic restorations.

A Brief Review on Engaging and Interactive Learning for Children: Exploring the Potential of Metaverse-Based Oral Health Promotion.

The importance of oral health for overall health makes it critical to establish proper oral hygiene practices in children early on. The traditional approaches to teaching children about dental health may not be successful since they may not be able to keep their interest. Metaverse technology offers a promising alternative, allowing for the design of engaging and immersive worlds that can effectively educate children about oral health. Despite the growing interest in the use of metaverse technology in healthcare, there is a lack of comprehensive reviews on its potential for oral health promotion in children. This review aims to fill this gap by providing an overview of the current state of metaverse-based oral health promotion for children, discussing its benefits and challenges, and highlighting its potential for improving children's oral health. By conducting this review, the authors hope to provide new information on the potential of metaverse-based oral health promotion for children and to contribute to the ongoing discussion on the use of metaverse technology in healthcare. This review may also provide valuable insights for dental organizations and practitioners interested in using metaverse technology to promote oral health and healthy living among children.

Exceptional bone remodeling over composite restoration in the management of external root resorption: A case report.

A 65-year-old Caucasian male was referred to an endodontic specialist practice in a private clinic in December 2019 for the management of an asymptomatic, radiolucent lesion located at the cervical level of the distal root of his right lower first molar, noticed during a routine periapical radiograph. After an accurate evaluation with cone-beam computed tomography (CBCT), the subgingival lesion was diagnosed as a supracrestal external cervical resorption (ECR), with a circumferential spread ⩽90°, confined to dentine without pulp involvement. The lesion was treated with the following sequence: (1) a full flap accessed the ECR, (2) the granulomatous tissue was removed from the root area, (3) the cavity was refreshed and filled with a well-refined and polished resin composite, (4) the flap was sutured at the cemento-enamel junction. A mandibular CBCT scan was performed before treatment, right after treatment, and 3 years postoperatively. Compared to the 3-year posttreatment CBCT scan, the immediate posttreatment one, revealed the absence of bone loss and an unexpected coronal bone remodeling with new bone formation over the treated lesion.

Magneto-dynamic tool for full arch immediate loading in post-traumatic restoration with narrow implants: A case report.

New surgical techniques using narrow, tilted implants positioned through a magneto-dynamic tool in guided surgery for a Toronto restoration. A 69-year-old woman wanted fixed rehabilitation to replace her removable complete dentures. A cone-beam computed tomography showed significant bone resorption in both the maxillary and mandibular regions. The plan was to load the entire upper arch with six implants immediately, while removable partial dentures were recommended for the lower jaw. The guided surgery project was aligned with the new dentures, and the laboratory created a printed cast with dental implant analogues in planned positions. A metal-reinforced denture was constructed, and surgery was performed to place six narrow implants using the magneto-dynamic instrument. The denture was directly screwed onto multi-unit abutments. Final rehabilitation was completed after 6 months. Narrow implants can be a good option for fixed, full-arch rehabilitations. Further research is needed to confirm these findings on a larger scale.

The quality of life in orthognathic surgery: surgery first versus traditional orthognathic surgery evaluation.

BACKGROUND: This study aims to evaluate the differences in terms of Quality of life and the degree of satisfaction with the result obtained between the two groups of patients treated with the orthodontic first approach and surgery first approach, through administered questionnaires inserted in the post-operative phase. METHODS: A total of 40 patients who previously underwent orthognathic surgery were included in this study, 20 treated with the orthodontic first approach and 20 treated with the Surgery First Approach. The impact of orthognathic surgery on patients' quality of life was recorded through the administration of the OHIP-14 test, FACE-Q test scale and FACE-Q test. Comparison between the two groups was done using a nonparametric inferential statistical test, the Mann-Whitney U-test. RESULTS: The results showed no significant differences in terms of quality of life between the two groups. Patients treated with orthodontic first approach presented greater psychological distress and perceived their faces as unattractive. CONCLUSIONS: A worsening of the aesthetics of the face determined by the orthodontic approach before surgery, may not be decisive in the quality of life of patients, which will certainly be better after surgery. SFA and OFA determine in both cases a marked improvement in the patient's quality of life.

Effect of Repeated Moist Heat Sterilization on Titanium Implant-Abutment Interface-An In Vitro Study.

OBJECTIVES: Sterilization eliminates microbial viability by decreasing the biological load, but likewise have the ability to deteriorate the mechanical properties of an implant material. This study intended to evaluate the effect of repeated moist heat sterilization on implant-abutment interface using two different implant systems. MATERIALS AND METHODS: Forty screw-retained titanium implant-abutment combinations (fixture 3.5 ×10 mm, abutment 2 mm diameter), twenty each from Genesis (Aktiv Implant Systems, United States) and Bredent (SKY, Germany), were divided into four different groups (n = 10) and placed in a computer-aided diagnostic model. The abutments from each group were exposed to first and second autoclave cycle (121°C for 30 minutes), connected back to the fixture and analyzed under scanning electron microscope for marginal gap and surface roughness. RESULTS: Genesis group showed higher marginal gaps on both sides (buccal/mesial [2.8 ± 0.47]; lingual/distal [2.8 ± 0.33]), while Bredent implant-abutment system (IAS) did not show any changes in marginal gaps after autoclaving. Differences within and between the group were found to be statistically significant. Surface roughness for Genesis (243.7 ± 70.30) and Bredent groups (528.9 ± 213.19) was highest at second autoclave, with Bredent implant-abutment showing higher values for surface roughness than Genesis IAS. CONCLUSION: Marginal vertical gap increased with autoclaving for Genesis IAS, while Bredent implant abutments were more stable. Surface roughness increases with autoclaving for both Genesis and Bredent group of IAS.