The Hypotension Prediction Index is equally effective in predicting intraoperative hypotension during non-cardiac surgery compared to a mean arterial pressure threshold: a prospective observational study.

BACKGROUND: The Hypotension Prediction Index is designed to timely predict intraoperative hypotension and is based on arterial waveform analysis using machine learning. It has recently been suggested that this algorithm is highly correlated with the mean arterial pressure (MAP) itself. Therefore, the aim of this study was to compare the Index with MAP based prediction methods and it is hypothesized that their ability to predict hypotension is comparable. METHODS: In this observational study, the Hypotension Prediction Index was used in addition to routine intraoperative monitoring during moderate- to high-risk elective non-cardiac surgery. The agreement in time between the default Hypotension Prediction Index alarm (>85) and different concurrent MAP thresholds was evaluated. Additionally, the predictive performance of the Index and different MAP based methods were assessed within five, ten and fifteen minutes before hypotension occurred. RESULTS: A total of 100 patients were included. A MAP threshold of 73 mmHg agreed 97% of the time with the default Index alarm, while a MAP threshold of 72 mmHg had the most comparable predictive performance. The areas under the receiver operating characteristic curve of the Hypotension Prediction Index (0.89 (0.88-0.89)) and concurrent MAP (0.88 (0.88-0.89)) were almost identical for predicting hypotension within five minutes, outperforming both linearly extrapolated MAP (0.85 (0.84-0.85)) and delta MAP (0.66 (0.65-0.67)). The positive predictive value was 31.9 (31.3-32.6)% for the default Index alarm and 32.9 (32.2-33.6)% for a MAP threshold of 72 mmHg. CONCLUSION: In clinical practice, the Hypotension Prediction Index alarms are highly similar to those derived from MAP, which implies that the machine learning algorithm could be substituted by an alarm based on a MAP threshold set at 72 or 73 mmHg. Further research on intraoperative hypotension prediction should therefore include comparison with MAP based alarms and related effects on patient outcome.

The physiology of venoarterial extracorporeal membrane oxygenation - A comprehensive clinical perspective.

Venoarterial extracorporeal membrane oxygenation (VA ECMO) has become a standard of care for severe cardiogenic shock, refractory cardiac arrest and related impending multiorgan failure. The widespread clinical use of this complex temporary circulatory support modality is still contrasted by a lack of formal scientific evidence in the current literature. This might at least in part be attributable to VA ECMO related complications, which may significantly impact on clinical outcome. In order to limit adverse effects of VA ECMO as much as possible an indepth understanding of the complex physiology during extracorporeally supported cardiogenic shock states is critically important. This review covers all relevant physiological aspects of VA ECMO interacting with the human body in detail. This, to provide a solid basis for health care professionals involved in the daily management of patients supported with VA ECMO and suffering from cardiogenic shock or cardiac arrest and impending multiorgan failure for the best possible care.

Use of 3D anatomical models in mock circulatory loops for cardiac medical device testing.

INTRODUCTION: Mock circulatory loops (MCLs) are mechanical representations of the cardiovascular system largely used to test the hemodynamic performance of cardiovascular medical devices (MD). Thanks to 3 dimensional (3D) printing technologies, MCLs can nowadays also incorporate anatomical models so to offer enhanced testing capabilities. The aim of this review is to provide an overview on MCLs and to discuss the recent developments of 3D anatomical models for cardiovascular MD testing. METHODS: The review first analyses the different techniques to develop 3D anatomical models, in both rigid and compliant materials. In the second section, the state of the art of MCLs with 3D models is discussed, along with the testing of different MDs: implantable blood pumps, heart valves, and imaging techniques. For each class of MD, the MCL is analyzed in terms of: the cardiovascular model embedded, the 3D model implemented (the anatomy represented, the material used, and the activation method), and the testing applications. DISCUSSIONS AND CONCLUSIONS: MCLs serve the purpose of testing cardiovascular MDs in different (patho-)physiological scenarios. The addition of 3D anatomical models enables more realistic connections of the MD with the implantation site and enhances the testing capabilities of the MCL. Current attempts focus on the development of personalized MCLs to test MDs in patient-specific hemodynamic and anatomical scenarios. The main limitation of MCLs is the impossibility to assess the impact of a MD in the long-term and at a biological level, for which animal experiments are still needed.

Clinical decision support for ExtraCorporeal Membrane Oxygenation: Will we fly by wire?

Prognostic modelling techniques have rapidly evolved over the past decade and may greatly benefit patients supported with ExtraCorporeal Membrane Oxygenation (ECMO). Epidemiological and computational physiological approaches aim to provide more accurate predictive assessments of ECMO-related risks and benefits. Implementation of these approaches may produce predictive tools that can improve complex clinical decisions surrounding ECMO allocation and management. This Review describes current applications of prognostic models and elaborates on upcoming directions for their clinical applicability in decision support tools directed at improved allocation and management of ECMO patients. The discussion of these new developments in the field will culminate in a futuristic perspective leaving ourselves and the readers wondering whether we may "fly ECMO by wire" someday.

Hemodynamic characterization of the Realheart® total artificial heart with a hybrid cardiovascular simulator.

BACKGROUND: Heart failure is a growing health problem worldwide. Due to the lack of donor hearts there is a need for alternative therapies, such as total artificial hearts (TAHs). The aim of this study is to evaluate the hemodynamic performance of the Realheart® TAH, a new 4-chamber cardiac prosthesis device. METHODS: The Realheart® TAH was connected to a hybrid cardiovascular simulator with inflow connections at the left/right atrium, and outflow connections at the ascending aorta/pulmonary artery. The Realheart® TAH was tested at different pumping rates and stroke volumes. Different systemic resistances (20.0-16.7-13.3-10.0 Wood units), pulmonary resistances (6.7-3.3-1.7 Wood units), and pulmonary/systemic arterial compliances (1.4-0.6 ml/mm Hg) were simulated. Tests were also conducted in static conditions, by imposing predefined values of preload-afterload across the artificial ventricle. RESULTS: The Realheart® TAH allows the operator to finely tune the delivered flow by regulating the pumping rate and stroke volume of the artificial ventricles. For a systemic resistance of 16.7 Wood units, the TAH flow ranges from 2.7 ± 0.1 to 6.9 ± 0.1 L/min. For a pulmonary resistance of 3.3 Wood units, the TAH flow ranges from 3.1 ± 0.0 to 8.2 ± 0.3 L/min. The Realheart® TAH delivered a pulse pressure ranging between ~25 mm Hg and ~50 mm Hg for the tested conditions. CONCLUSIONS: The Realheart® TAH offers great flexibility to adjust the output flow and delivers good pressure pulsatility in the vessels. Low sensitivity of device flow to the pressure drop across it was identified and a new version is under development to counteract this.

Video-based valve motion combined with computational fluid dynamics gives stable and accurate simulations of blood flow in the Realheart total artificial heart.

BACKGROUND: Patients with end-stage, biventricular heart failure, and for whom heart transplantation is not an option, may be given a Total Artificial Heart (TAH). The Realheart® is a novel TAH which pumps blood by mimicking the native heart with translation of an atrioventricular plane. The aim of this work was to create a strategy for using Computational Fluid Dynamics (CFD) to simulate haemodynamics in the Realheart®, including motion of the atrioventricular plane and valves. METHODS: The accuracies of four different computational methods for simulating fluid-structure interaction of the prosthetic valves were assessed by comparison of chamber pressures and flow rates with experimental measurements. The four strategies were: prescribed motion of valves opening and closing at the atrioventricular plane extrema; simulation of fluid-structure interaction of both valves; prescribed motion of the mitral valve with simulation of fluid-structure interaction of the aortic valve; motion of both valves prescribed from video analysis of experiments. RESULTS: The most accurate strategy (error in ventricular pressure of 6%, error in flow rate of 5%) used video-prescribed motion. With the Realheart operating at 80 bpm, the power consumption was 1.03 W, maximum shear stress was 15 Pa, and washout of the ventricle chamber after 4 cycles was 87%. CONCLUSIONS: This study, the first CFD analysis of this novel TAH, demonstrates that good agreement between computational and experimental data can be achieved. This method will therefore enable future optimisation of the geometry and motion of the Realheart®.

Development of a computational simulator of the extracorporeal membrane oxygenation and its validation with in vitro measurements.

In the recent years, the use of extracorporeal membrane oxygenation (ECMO) has grown substantially, posing the need of having specialized medical and paramedical personnel dedicated to it. Optimization of the therapy, definition of new therapeutic strategies, and ECMO interaction with the cardiorespiratory system require numerous specific skills and preclinical models for patient successful management. The aim of the present work is to develop and validate a computational model of ECMO and connect it to an already existing lumped parameter model of the cardiorespiratory system. The ECMO model was connected between the right atrium and the aorta of the cardiorespiratory simulator. It includes a hydraulic module that is a representation of the tubing, oxygenator, and pump. The resulting pressures and flows within the ECMO circuit were compared to the measurements conducted in vitro on a real ECMO. Additionally, the hemodynamic effects the ECMO model elicited on the cardiorespiratory simulator were compared with experimental data taken from the literature. The comparison between the hydraulic module and the in vitro measurements evidenced a good agreement in terms of flow, pressure drops across the pump, across the oxygenator and the tubing (maximal percentage error recorded was 17.6%). The hemodynamic effects of the ECMO model on the cardiovascular system were in agreement with what observed experimentally in terms of cardiac output, systemic pressure, pulmonary arterial pressure, and left atrial pressure. The ECMO model we developed and embedded into the cardiorespiratory simulator, is a useful tool for the investigation of basic physiological mechanisms and principles of ECMO therapy. The model was sided by a user interface dedicated to training applications. As such, the resulting simulator can be used for the education of students, medical and paramedical personnel.

Energetics of blood flow in Fontan circulation under VAD support.

The need to simulate the normal operating conditions of the human body is the key factor in every study and engineering process of bioelectronic devices designed for implantation. The Fontan procedure is an example of such a process aimed to support the human body function. It is a standard treatment method for patients with a functionally univentricular heart. However, it has significant drawbacks such as overload of the only functional heart ventricle that often leads to the necessity of the heart transplantation. In this study, we analyze the total cavopulmonary connection (TCPC) influence on the blood with and without connected auxiliary blood circulation pump. We investigate four different types of TCPC configurations, analyze blood pressure and different flow rate, study the turbulent kinetic energy distribution, and evaluate hydraulic and power losses for various cases. Finally, we calculate volumetric scalar shear stresses distribution and demonstrate the high potential of TCPC configuration with connected rotary pump as a tool for the load redistribution in the functional heart ventricle. This work is particularly relevant for improving existing TCPCs' quality that can extend the life of Fontan patients. Moreover, it also applies to the reduction of morbidity and mortality of the patients waiting for the heart transplantation.

LVAD speed increase during exercise, which patients would benefit the most? A simulation study.

Patients supported with a left ventricular assist device (LVAD) have impaired cardiovascular adaptations during exercise, resulting in reduced total cardiac output and exercise intolerance. The aim of this study is to report associations among these impaired cardiovascular parameters and exercise hemodynamics, and to identify in which conditions an LVAD speed increase can provide substantial benefits to exercise. A cardiorespiratory simulator was used to reproduce the average hemodynamics of LVAD patients at exercise. Then, a sensitivity study was conducted where cardiovascular parameters were changed individually ±20% of their baseline value at exercise (heart rate, left/right ventricular contractility, total peripheral resistance, and valve pathologies). Simulations were performed at a baseline LVAD speed of 2700 rpm and repeated at 3500 rpm to evaluate the benefits of a higher LVAD support on hemodynamics. Total cardiac output (TCO) was mostly impaired by a poor left ventricular contractility or vasodilation at exercise (-0.6 L/min), followed by a poor chronotropic response (-0.3 L/min) and by a poor right ventricular contractility (-0.2 L/min). LVAD speed increase better unloads the left ventricle and improves total cardiac output in all the simulated conditions. The most substantial benefits from LVAD speed increase were observed in case of poor left ventricular contractility (TCO + 1.6 L/min) and vascular dysfunction (TCO + 1.4 L/min) followed by lower heart rate (TCO + 1.3 L/min) and impaired right ventricular contractility (TCO + 1.1 L/min). Despite the presence of the LVAD, exercise hemodynamic is strongly depending on the ability of the cardiovascular system to adapt to exercise. A poor left ventricular inotropic response and a poor vascular function can strongly impair cardiac output at exercise. In these conditions, LVAD speed increase can be an effective strategy to augment total cardiac output and unload the left ventricle. These results evidence the need to design a physiological LVAD speed controller, tailored on specific patient's needs.

Application of a Lumped Parameter Model to Study the Feasibility of Simultaneous Implantation of a Continuous Flow Ventricular Assist Device (VAD) and a Pulsatile Flow VAD in BIVAD Patients.

The aim of this work is to develop and test a lumped parameter model of the cardiovascular system to simulate the simultaneous use of pulsatile (P) and continuous flow (C) ventricular assist devices (VADs) on the same patient. Echocardiographic and hemodynamic data of five pediatric patients undergoing VAD implantation were retrospectively collected and used to simulate the patients' baseline condition with the numerical model. Once the baseline hemodynamic was reproduced for each patient, the following assistance modalities were simulated: (a) CVAD assisting the right ventricle and PVAD assisting the left ventricle (RCF + LPF), (b) CVAD assisting the left ventricle and PVAD assisting the right ventricle (LCF + RPF). The numerical model can well reproduce patients' baseline. The cardiac output increases in both assisted configurations (RCF + LPF: +17%, LCF + RPF: +21%, P = ns), left (right) ventricular volumes decrease more evidently in the configuration LCF + RPF (RCF + LPF), left (right) atrial pressure decreases in the LCF + RPF (RCF + LPF) modality. The pulmonary arterial pressure slightly decreases in the configuration LCF + RPF and it increases with RCF + LPF. Left and right ventricular external work increases in both configurations probably because of the total cardiac output increment. However, left and right artero-ventricular coupling improves especially in the LCF + RPF (-36% for the left ventricle and -21% for the right ventricle, P = ns). The pulsatility index decreases by 8.5% in the configuration LCF + RPF and increases by 6.4% with RCF + LPF (P = 0.0001). A numerical model could be useful to tailor on patients the choice of the VAD that could be implanted to improve the hemodynamic benefits. Moreover, a model could permit to simulate extreme physiological conditions and innovative configurations, as the implantation of both CVAD and PVAD on the same patient.

Control of a Pediatric Pulsatile Ventricular Assist Device: A Hybrid Cardiovascular Model Study.

The aim of this work is to study pediatric pneumatic ventricle (PVAD) performance, versus VAD rate (VADR) and native heart rate (HR) ratio Rr (VADR/HR). The study uses a hybrid model of the cardiovascular system (HCS). HCS consists of a computational part (a lumped parameter model including left and right ventricles, systemic and pulmonary arterial and venous circulation) interfaced to a physical part. This permits the connection of a VAD (15 mL PVAD). Echocardiographic and hemodynamic data of a pediatric patient (average weight 14.3 kg, HR 100 bpm, systemic pressure 75/44 mm Hg, CO 1.5 L/min) assisted apically with asynchronous PVAD were used to set up a basal condition in the model. After model tuning, the assistance was started, setting VAD parameters (ejection and filling pressures, systole duration) to completely fill and empty the PVAD. The study was conducted with constant HR and variable VADR (50-120, step 10, bpm). Experiments were repeated for two additional patients' HRs, 90 and 110 bpm and for two values of systemic arterial resistance (Ras ) and Emax . Experimental data were collected and stored on disk. Analyzed data include average left and right ventricular volumes (LVV, RVV), left ventricular flow (LVF), VAD flow (VADF), and total cardiac output (COt). Data were analyzed versus Rr. LVV and RVV are sensitive to Rr and a left ventricular unloading corresponds in general to a right ventricular loading. In the case of asynchronous assistance, frequency beats are always present and the beat rate is equal to the difference between HR and VADR. In the case of pulsatile asynchronous LVAD assistance, VADR should be chosen to minimize frequency beat effects and right ventricular loading and to maximize left ventricular unloading.

Exercise physiology in chronic mechanical circulatory support patients: vascular function and beyond.

PURPOSE OF REVIEW: The majority of patients currently implanted with left ventricular assist devices have the expectation of support for more than 2 years. As a result, survival alone is no longer a sufficient distinctive for this technology, and there have been many studies within the last few years examining functional capacity and exercise outcomes. RECENT FINDINGS: Despite strong evidence for functional class improvements and increases in simple measures of walking distance, there remains incomplete normalization of exercise capacity, even in the presence of markedly improved resting hemodynamics. Reasons for this remain unclear. Despite current pumps being run at a fixed speed, it is widely recognized that pump outputs significantly increase with exercise. The mechanism of this increase involves the interaction between preload, afterload, and the intrinsic pump function curves. The role of the residual heart function is also important in determining total cardiac output, as well as whether the aortic valve opens with exercise. Interactions with the vasculature, with skeletal muscle blood flow and the state of the autonomic nervous system are also likely to be important contributors to exercise performance. SUMMARY: Further studies examining optimization of pump function with active pump speed modulation and options for optimization of the overall patient condition are likely to be needed to allow left ventricular assist devices to be used with the hope of full functional physiological recovery.

Use of Ventricular Assist Device in Univentricular Physiology: The Role of Lumped Parameter Models.

Failing single-ventricle (SV) patients might benefit from ventricular assist devices (VADs) as a bridge to heart transplantation. Considering the complex physiopathology of SV patients and the lack of established experience, the aim of this work was to realize and test a lumped parameter model of the cardiovascular system, able to simulate SV hemodynamics and VAD implantation effects. Data of 30 SV patients (10 Norwood, 10 Glenn, and 10 Fontan) were retrospectively collected and used to simulate patients' baseline. Then, the effects of VAD implantation were simulated. Additionally, both the effects of ventricular assistance and cavopulmonary assistance were simulated in different pathologic conditions on Fontan patients, including systolic dysfunction, diastolic dysfunction, and pulmonary vascular resistance increment. The model can reproduce patients' baseline well. Simulation results suggest that the implantation of VAD: (i) increases the cardiac output (CO) in all the three palliation conditions (Norwood 77.2%, Glenn 38.6%, and Fontan 17.2%); (ii) decreases the SV external work (SVEW) (Norwood 55%, Glenn 35.6%, and Fontan 41%); (iii) increases the mean pulmonary arterial pressure (Pap) (Norwood 39.7%, Glenn 12.1%, and Fontan 3%). In Fontan circulation, with systolic dysfunction, the left VAD (LVAD) increases CO (35%), while the right VAD (RVAD) determines a decrement of inferior vena cava pressure (Pvci) (39%) with 34% increment of CO. With diastolic dysfunction, the LVAD increases CO (42%) and the RVAD decreases the Pvci. With pulmonary vascular resistance increment, the RVAD allows the highest CO (50%) increment with the highest decrement of Pvci (53%). The single ventricular external work (SVEW) increases (decreases) increasing the VAD speed in cavopulmonary (ventricular) assistance. Numeric models could be helpful in this challenging and innovative field to support patients and VAD selection to optimize the clinical outcome and personalize the therapy.

Hemodynamic Effects of Ventricular Assist Device Implantation on Norwood, Glenn, and Fontan Circulation: A Simulation Study.

The growing population of failing single-ventricle (SV) patients might benefit from ventricular assist device (VAD) support as a bridge to heart transplantation. However, the documented experience is limited to isolated case reports. Considering the complex and different physiopathology of Norwood, Glenn, and Fontan patients and the lack of established experience, the aim of this work is to realize and test a lumped parameter model of the cardiovascular system able to simulate SV hemodynamics and VAD implantation effects to support clinical decision. Hemodynamic and echocardiographic data of 30 SV patients (10 Norwood, 10 Glenn, and 10 Fontan) were retrospectively collected and used to simulate patients' baseline. Then, the effects of VAD implantation were simulated. Simulation results suggest that the implantation of VAD: (i) increases the cardiac output and the mean arterial systemic pressure in all the three palliation conditions (Norwood 77.2 and 19.7%, Glenn 38.6 and 32.2%, and Fontan 17.2 and 14.2%); (ii) decreases the SV external work (Norwood 55%, Glenn 35.6%, and Fontan 41%); (iii) decreases the pressure pulsatility index (Norwood 65.2%, Glenn 81.3%, and Fontan 64.8%); (iv) increases the pulmonary arterial pressure in particular in the Norwood circulation (Norwood 39.7%, Glenn 12.1% and Fontan 3%); and (v) decreases the atrial pressure (Norwood 2%, Glenn 10.6%, and Fontan 8.6%). Finally, the VAD work is lower in the Norwood circulation (30.4 mL·mm Hg) in comparison with Fontan (40.3 mL·mm Hg) and to Glenn (64.5 mL·mm Hg) circulations. The use of VAD in SV physiology could be helpful to bridge patients to heart transplantations by increasing the CO and unloading the SV with a decrement of the atrial pressure and the SV external work. The regulation of the pulmonary flow is challenging because the Pap is increased by the presence of VAD. The hemodynamic changes are different in the different SV palliation step. The use of numerical models could be helpful to support patient and VAD selection to optimize the clinical outcome.

The use of a numerical model to simulate the cavo-pulmonary assistance in Fontan circulation: a preliminary verification.

The lack of an established experience on the use of VAD for the cavo-pulmonary assistance leads to the need of dedicated VADs development and animal experiments. A dedicated numerical model could support clinical and experimental strategies design and new VADs testing. The aim of this work is to perform a preliminary verification of a lumped parameter model of the cardiovascular system to simulate Fontan physiology and the effect of cavo-pulmonary assistance. Literature data of 4 pigs were used to simulate animals' baseline, and then the model was tested in simulating Fontan circulation and cavo-pulmonary-assisted condition comparing the simulation outcome (Sim) with measured literature data (Me). The results show that the numerical model can well reproduce experimental data in all three conditions (baseline, Fontan and assisted Fontan) [cardiac output (l/min): Me = 2.8 ± 1.7, Sim = 2.8 ± 1.8; ejection fraction (%): Me = 57 ± 17, Sim = 54 ± 17; arterial systemic pressure (mmHg): Me = 41.8 ± 18.6, Sim = 43.8 ± 18.1; pulmonary arterial pressure (mmHg): Me = 15.4 ± 8.9, Sim = 17.7 ± 9.9; caval pressure (mmHg): Me = 6.8 ± 4.1, Sim = 7 ± 4.6]. Systolic elastance, arterial systemic and arterial pulmonary resistances increase (10, 69, and 100 %) passing from the biventricular circulation to the Fontan physiology and then decrease (21, 39, and 50 %) once the VAD was implanted. The ventricular external work decreases (71 %) passing from the biventricular circulation to the Fontan physiology and it increases three times after the VAD implantation in parallel with the VAD power consumption. A numerical model could support clinicians in an innovative and challenging field as the use of VAD to assist the Fontan physiology and it could be helpful to personalize the VAD insertion on the base of ventricular systo-diastolic function, circulatory parameters and energetic variables.

The relationship between R-wave magnitude and ventricular volume during continuous left ventricular assist device assistance: experimental study.

The current use of left ventricular assist devices (LVADs) as destination therapy is associated with the clinical need of monitoring patient-pump interaction. To this aim, the present work investigated the possibility of getting useful information about the status of the assisted left ventricle using electrocardiographic (ECG) data. A total of six animals, undergoing Gyro Centrifugal Pump 2 implantation (a new version of Gyro Centrifugal Pump C1E3 [Kyocera Corporation, Kyoto, Japan]) and CircuLite Synergy Micropump (CircuLite, Inc., Saddlebrooke, NJ, USA) in atrio-aortic connection, were analyzed. Data refer to different LVAD speeds with consequently different levels of ventricular unloading. From ECG signal, the R wave peak was individuated together with the corresponding left ventricular volume. Then on both signals, a moving average analysis was performed to reduce the effect of the ventilation. A regression and correlation analysis performed on the two resulting signals evidenced that the R wave peak and the ventricular volume are strictly related. Specifically, any change of LVAD speed, inducing a change in ventricular volume, is associated with a change in R wave peak value. The present work is a first step in investigating the usefulness of the ECG signal during LVAD therapy, for the monitoring of mechanical parameters of the heart such as the ventricular volumes. The correlation found between the ECG and the ventricular volume can be a promising starting point for possible future noninvasive LVAD patient monitoring.

Simulation of Ventricular, Cavo-Pulmonary, and Biventricular Ventricular Assist Devices in Failing Fontan.

Considering the lack of donors, ventricular assist devices (VADs) could be an alternative to heart transplantation for failing Fontan patients, in spite of the lack of experience and the complex anatomy and physiopathology of these patients. Considering the high number of variables that play an important role such as type of Fontan failure, type of VAD connection, and setting (right VAD [RVAD], left VAD [LVAD], or biventricular VAD [BIVAD]), a numerical model could be useful to support clinical decisions. The aim of this article is to develop and test a lumped parameter model of the cardiovascular system simulating and comparing the VAD effects on failing Fontan. Hemodynamic and echocardiographic data of 10 Fontan patients were used to simulate the baseline patients' condition using a dedicated lumped parameter model. Starting from the simulated baseline and for each patient, a systolic dysfunction, a diastolic dysfunction, and an increment of the pulmonary vascular resistance were simulated. Then, for each patient and for each pathology, the RVAD, LVAD, and BIVAD implantations were simulated. The model can reproduce patients' baseline well. In the case of systolic dysfunction, the LVAD unloads the single ventricle and increases the cardiac output (CO) (35%) and the arterial systemic pressure (Pas) (25%). With RVAD, a decrement of inferior vena cava pressure (Pvci) (39%) was observed with 34% increment of CO, but an increment of the single ventricle external work (SVEW). With the BIVAD, an increment of Pas (29%) and CO (37%) was observed. In the case of diastolic dysfunction, the LVAD increases CO (42%) and the RVAD decreases the Pvci, while both increase the SVEW. In the case of pulmonary vascular resistance increment, the highest CO (50%) and Pas (28%) increment is obtained with an RVAD with the highest decrement of Pvci (53%) and an increment of the SVEW but with the lowest VAD power consumption. The use of numerical models could be helpful in this innovative field to evaluate the effect of VAD implantation on Fontan patients to support patient and VAD type selection personalizing the assistance.

Reproduction of continuous flow left ventricular assist device experimental data by means of a hybrid cardiovascular model with baroreflex control.

Long-term mechanical circulatory assistance opened new problems in ventricular assist device-patient interaction, especially in relation to autonomic controls. Modeling studies, based on adequate models, could be a feasible approach of investigation. The aim of this work is the exploitation of a hybrid (hydronumerical) cardiovascular simulator to reproduce and analyze in vivo experimental data acquired during a continuous flow left ventricular assistance. The hybrid cardiovascular simulator embeds three submodels: a computational cardiovascular submodel, a computational baroreflex submodel, and a hydronumerical interface submodel. The last one comprises two impedance transformers playing the role of physical interfaces able to provide a hydraulic connection with specific cardiovascular sites (in this article, the left atrium and the ascending/descending aorta). The impedance transformers are used to connect a continuous flow pump for partial left ventricular support (Synergy Micropump, CircuLite, Inc., Saddlebrooke, NJ, USA) to the hybrid cardiovascular simulator. Data collected from five animals in physiological, pathological, and assisted conditions were reproduced using the hybrid cardiovascular simulator. All parameters useful to characterize and tune the hybrid cardiovascular simulator to a specific hemodynamic condition were extracted from experimental data. Results show that the simulator is able to reproduce animal-specific hemodynamic status both in physiological and pathological conditions, to reproduce cardiovascular left ventricular assist device (LVAD) interaction and the progressive unloading of the left ventricle for different pump speeds, and to investigate the effects of the LVAD on baroreflex activity. Results in chronic heart failure conditions show that an increment of LVAD speed from 20 000 to 22 000 rpm provokes a decrement of left ventricular flow of 35% (from 2 to 1.3 L/min). Thanks to its flexibility and modular structure, the simulator is a platform potentially useful to test different assist devices, thus providing clinicians additional information about LVAD therapy strategy.