Human Mesenchymal Stem Cells Growth and Osteogenic Differentiation on Piezoelectric Poly(vinylidene fluoride) Microsphere Substrates.

The aim of this work was to determine the influence of the biomaterial environment on human mesenchymal stem cell (hMSC) fate when cultured in supports with varying topography. Poly(vinylidene fluoride) (PVDF) culture supports were prepared with structures ranging between 2D and 3D, based on PVDF films on which PVDF microspheres were deposited with varying surface density. Maintenance of multipotentiality when cultured in expansion medium was studied by flow cytometry monitoring the expression of characteristic hMSCs markers, and revealed that cells were losing their characteristic surface markers on these supports. Cell morphology was assessed by scanning electron microscopy (SEM). Alkaline phosphatase activity was also assessed after seven days of culture on expansion medium. On the other hand, osteoblastic differentiation was monitored while culturing in osteogenic medium after cells reached confluence. Osteocalcin immunocytochemistry and alizarin red assays were performed. We show that flow cytometry is a suitable technique for the study of the differentiation of hMSC seeded onto biomaterials, giving a quantitative reliable analysis of hMSC-associated markers. We also show that electrosprayed piezoelectric poly(vinylidene fluoride) is a suitable support for tissue engineering purposes, as hMSCs can proliferate, be viable and undergo osteogenic differentiation when chemically stimulated.

Gelatin microparticles aggregates as three-dimensional scaffolding system in cartilage engineering.

A three-dimensional (3D) scaffolding system for chondrocytes culture has been produced by agglomeration of cells and gelatin microparticles with a mild centrifuging process. The diameter of the microparticles, around 10 µ, was selected to be in the order of magnitude of the chondrocytes. No gel was used to stabilize the construct that maintained consistency just because of cell and extracellular matrix (ECM) adhesion to the substrate. In one series of samples the microparticles were charged with transforming growth factor, TGF-ß1. The kinetics of growth factor delivery was assessed. The initial delivery was approximately 48 % of the total amount delivered up to day 14. Chondrocytes that had been previously expanded in monolayer culture, and thus dedifferentiated, adopted in this 3D environment a round morphology, both with presence or absence of growth factor delivery, with production of ECM that intermingles with gelatin particles. The pellet was stable from the first day of culture. Cell viability was assessed by MTS assay, showing higher absorption values in the cell/unloaded gelatin microparticle pellets than in cell pellets up to day 7. Nevertheless the absorption drops in the following culture times. On the contrary the cell viability of cell/TGF-ß1 loaded gelatin microparticle pellets was constant during the 21 days of culture. The formation of actin stress fibres in the cytoskeleton and type I collagen expression was significantly reduced in both cell/gelatin microparticle pellets (with and without TGF-ß1) with respect to cell pellet controls. Total type II collagen and sulphated glycosaminoglycans quantification show an enhancement of the production of ECM when TGF-ß1 is delivered, as expected because this growth factor stimulate the chondrocyte proliferation and improve the functionality of the tissue.

Glass transition and dynamics in BSA-water mixtures over wide ranges of composition studied by thermal and dielectric techniques.

Protein-water dynamics in mixtures of water and a globular protein, bovine serum albumin (BSA), was studied over wide ranges of composition, in the form of solutions or hydrated solid pellets, by differential scanning calorimetry (DSC), thermally stimulated depolarization current technique (TSDC) and dielectric relaxation spectroscopy (DRS). Additionally, water equilibrium sorption isotherm (ESI) measurements were performed at room temperature. The crystallization and melting events were studied by DSC and the amount of uncrystallized water was calculated by the enthalpy of melting during heating. The glass transition of the system was detected by DSC for water contents higher than the critical water content corresponding to the formation of the first sorption layer of water molecules directly bound to primary hydration sites, namely 0.073 (grams of water per grams of dry protein), estimated by ESI. A strong plasticization of the T(g) was observed by DSC for hydration levels lower than those necessary for crystallization of water during cooling, i.e. lower than about 0.3 (grams of water per grams of hydrated protein) followed by a stabilization of T(g) at about -80°C for higher water contents. The α relaxation associated with the glass transition was also observed in dielectric measurements. In TSDC a microphase separation could be detected resulting in double T(g) for some hydration levels. A dielectric relaxation of small polar groups of the protein plasticized by water, overlapped by relaxations of uncrystallized water molecules, and a separate relaxation of water in the crystallized water phase (bulk ice crystals) were also recorded.

Relaxation dynamics of poly(vinylidene fluoride) studied by dynamical mechanical measurements and dielectric spectroscopy.

The aim of this study is to analyze the mobility of polymer chains in semicrystalline poly(vinylidene fluoride) (PVDF). PVDF crystallizes from the melt in the α crystalline phase. The transformation from the α phase to the electroactive ß phase can be induced by stretching at temperatures in the range between 80 and 140 °C. The spherulitic structure of the crystalline phase is deformed during stretching to form fibrils oriented in the direction of the strain. The amorphous phase confined among the crystalline lamellae is distorted as well and some degree of orientation of the polymer chains is expected. Dynamic-mechanical and dielectric spectroscopy measurements were performed in PVDF films stretched to strain ratios up to 5 at temperatures between 80 and 140 °C. Dynamic-mechanical measurements were conducted between -60 °C and melting and in this temperature range the relaxation spectra show the main relaxation of the amorphous phase (called ß-relaxation) and at higher temperatures a relaxation related to crystallites motions (α (c)-relaxation). Although the mean relaxation times of the ß-relaxation are nearly equal in PVDF before and after crystal phase transformation, a significant change of shape of the relaxation spectrum proves the effect of chain distortion due to crystal reorganization. In stretched PVDF the elastic modulus of the polymer in the direction of deformation is significantly higher than in the transversal one, as expected by chain and crystals fibril orientation. The recovery of the deformation when the sample is heated is related with the appearance of the α (c)-relaxation. Dielectric spectroscopy spectrum shows the main relaxation of the amorphous phase and a secondary process (γ-relaxation) at lower temperatures. Stretching produces significant changes in the relaxation processes, mainly in the strength and shape of the main relaxation ß. The Havriliak-Negami function has been applied to analyze the dielectric response.

Fabrication of poly(lactic acid)-poly(ethylene oxide) electrospun membranes with controlled micro to nanofiber sizes.

Biodegradable poly(L-lactide acid) (PLLA) nanofiber membranes were prepared by electrospinning of PLLA and poly(ethylene oxide) (PEO). The selective removal of PEO by water allows to obtain smaller fiber diameters and to increase the porosity of the membranes in comparison to PLLA membranes obtained under the same electrospinning conditions. After removal of PEO membranes with fiber sizes of 260 nm and average porosity close to 80% are obtained. Thermal and infrared results confirm the poor miscibility of PLLA and PEO, with the PEO randomly distributed along the PLLA fibers. On the other, PLLA and PEO mixing strongly affect their respective degradation temperatures. The influence of the PEO in the electrospinning process is discussed and the results are correlated to the evolution of the PLLA fiber diameter.

Electrical stimulation: Effective cue to direct osteogenic differentiation of mesenchymal stem cells?

Mesenchymal stem cells (MSCs) play a major role in bone tissue engineering (BTE) thanks to their capacity for osteogenic differentiation and being easily available. In vivo, MSCs are exposed to an electroactive microenvironment in the bone niche, which has piezoelectric properties. The correlation between the electrically active milieu and bone's ability to adapt to mechanical stress and self-regenerate has led to using electrical stimulation (ES) as physical cue to direct MSCs differentiation towards the osteogenic lineage in BTE. This review summarizes the different techniques to electrically stimulate MSCs to induce their osteoblastogenesis in vitro, including general electrical stimulation and substrate mediated stimulation by means of conductive or piezoelectric cell culture supports. Several aspects are covered, including stimulation parameters, treatment times and cell culture media to summarize the best conditions for inducing MSCs osteogenic commitment by electrical stimulation, from a critical point of view. Electrical stimulation activates different signaling pathways, including bone morphogenetic protein (BMP) Smad-dependent or independent, regulated by mitogen activated protein kinases (MAPK), extracellular signal-regulated kinases (ERK) and p38. The roles of voltage gate calcium channels (VGCC) and integrins are also highlighted according to their application technique and parameters, mainly converging in the expression of RUNX2, the master regulator of the osteogenic differentiation pathway. Despite the evident lack of homogeneity in the approaches used, the ever-increasing scientific evidence confirms ES potential as an osteoinductive cue, mimicking aspects of the in vivo microenvironment and moving one step forward to the translation of this approach into clinic.

Molecular mobility in biodegradable poly(ε-caprolactone)/poly(hydroxyethyl acrylate) networks.

Poly(ε-caprolactone)/poly(hydroxyethyl acrylate) networks have been investigated by thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry (DSC). The introduction of hydrophilic units (HEA) in the system aiming at tailoring the hydrophilicity of the system results in a series of copolymer networks with microphase separation into hydrophobic/hydrophilic domains. Polycaprolactone (PCL) crystallization is prevented by the topological constraints HEA units imposed in such heterogeneous domains. Moreover, the mobility of the amorphous PCL chains is enhanced as revealed by the main relaxation process which becomes faster. The glass transition of PHEA-rich domains shifts to lower temperatures, as the total amount of PCL in the copolymer increases, due to the presence of PCL units within the same region. The behaviour of the copolymer networks swollen with different content of water has been investigated to analyze the interaction between water molecules and hydrophobic/hydrophilic domains and provide further insights into the molecular structure of the system.

Hybrid structure in PCL-HAp scaffold resulting from biomimetic apatite growth.

Polymer-ceramic composites are favourite candidates when aiming to replace bone tissue. We present here scaffolds made of polycaprolactone-hydroxyapatite (PCL-HAp) composites, and investigate in vitro mineralisation of the scaffolds in SBF after or without a nucleation treatment. In vitro bioactivity is enhanced by HAp incorporation as well as by nucleation treatment, as demonstrated by simulated body fluid (SBF) mineralization. Surprisingly, we obtained a hybrid interconnected organic-inorganic structure, as a result of micropore invasion by biomimetic apatite, which results in a mechanical strengthening of the material after two weeks of immersion in SBF92. The presented scaffolds, due to their multiple qualities, are expected to be valuable supports for bone tissue engineering.

Poly(vinylidene) fluoride membranes coated by heparin/collagen layer-by-layer, smart biomimetic approaches for mesenchymal stem cell culture.

The use of piezoelectric materials in tissue engineering has grown considerably since inherent bone piezoelectricity was discovered. Combinations of piezoelectric polymers with magnetostrictive nanoparticles (MNP) can be used to magnetoelectrically stimulate cells by applying an external magnetic field which deforms the magnetostrictive nanoparticles in the polymer matrix, deforming the polymer itself, which varies the surface charge due to the piezoelectric effect. Poly(vinylidene) fluoride (PVDF) is the piezoelectric polymer with the largest piezoelectric coefficients, being a perfect candidate for osteogenic differentiation. As a first approach, in this paper, we propose PVDF membranes containing magnetostrictive nanoparticles and a biomimetic heparin/collagen layer-by-layer (LbL) coating for mesenchymal stem cell culture. PVDF membranes 20% (w/v) with and without cobalt ferrite oxide (PVDF-CFO) 10% (w/w) were produced by non-solvent induced phase separation (NIPS). These membranes were found to be asymmetric, with a smooth surface, crystallinity ranging from 65% to 61%, and an electroactive ß-phase content of 51.8% and 55.6% for PVDF and PVDF-CFO, respectively. Amine groups were grafted onto the membrane surface by an alkali treatment, confirmed by ninhydrin test and X-ray photoelectron spectroscopy (XPS), providing positive charges for the assembly of heparin/collagen layers by the LbL technique. Five layers of each polyelectrolyte were deposited, ending with collagen. Human mesenchymal stem cells (hMSC) were used to test cell response in a short-term culture (1, 3 and 7 days). Nucleus cell counting showed that LbL favored cell proliferation in PVDF-CFO over non-coated membranes.

Bond fluctuation model to describe physical aging in polymeric materials.

The thermal behavior of a polymeric material during a cooling ramp was simulated by means of the bond fluctuation model. By introducing both an intramolecular and an intermolecular potential, if the cooling rate is fast enough, the glass transition occurs, and the states attained at low temperatures can be characterized as disordered glasses. The evolution of the resulting amorphous systems was then studied during isothermal periods both for systems starting as an amorphous liquid and as an amorphous glass. The results show that after a very long annealing time at temperatures above the glass transition, an excess of energy loss appears in the system when compared to the usual glass theory. The Monte Carlo method was used to simulate the physical aging phenomena at long time scales.

Influence of silver nanoparticles concentration on the alpha- to beta-phase transformation and the physical properties of silver nanoparticles doped poly(vinylidene fluoride) nanocomposites.

This paper describes the processing of silver nanoparticle doped poly(vinylidene fluoride). The effect of the dopant concentration on the alpha- to beta-phase transformation of the polymer as well as in the morphological, thermal, optical and dielectric properties of the nanocomposites was investigated. Spherical silver nanoparticles were incorporated into the poly(vinylidene fluoride) polymeric matrix by the solvent casting method, with different Ag concentrations. Well-dispersed Ag nanoparticles act as nucleation centers, increasing the degree of crystallinity of the nanocomposites. Homogeneous dispersion of silver nanoparticles is demonstrated through the presence of surface plasmon resonance absorption in the nanocomposites. The alpha- to beta-phase transformation was achieved in the polymer matrix and a maximum of approximately equal to 70% of beta-PVDF was reached at 80 degrees C and a stretching ratio of 400%. The dielectric constant of the nanocomposites increases with increasing metal nanoparticle concentration, up to approximately equal to 26 at 0.020 wt% Ag content. The alpha- to beta-phase transformation affects both the dielectric response and the surface plasmon resonance.

Fluctuations of conformational mobility of macromolecules around the glass transition.

The heterogeneity of local dynamics in disordered systems is behind some key features of glass transition. In order to improve our understanding of the molecular dynamics in disordered systems in the vicinity of the glass transition, different parameters have been proposed to quantitatively describe dynamical heterogeneity. In the case of polymers, free volume models relate the macromolecular mobility to the free or accessible volume. The relationship between dynamic heterogeneity and fluctuations of accessible volume seems straightforward. In the present work, the heterogeneity of local dynamics in polymeric systems is analyzed by computer simulation with the bond fluctuation model. The value of the accessible volume around each polymer chain is evaluated from a snapshot or static structure at each system state, resulting in a distribution of accessible volume that reflects system heterogeneity. The relationship between the average value and the standard deviation of free volume distributions at different temperatures fits a master curve for different systems, regardless of the specific inter- and intramolecular interaction potentials that define each material. The dynamic slowdown around the glass transition is accompanied by a clear evolution of the mean value and shape of the accessible free volume distribution. The relative fluctuation of the dynamically accessible volume has been used as a parameter to quantitatively describe heterogeneity. The fluctuation varies with temperature with remarkable differences between the liquid and glassy states of the systems studied, presenting a peak at the glass transition temperature, which can be interpreted as a reflection of the distribution of local glass transition temperatures.

Influence of the substrate's hydrophilicity on the in vitro Schwann cells viability.

A series of polymeric biomaterials including poly (methyl acrylate) (PMA), chitosan (CHT), poly(ethyl acrylate) (PEA), poly(hydroxyethyl acrylate) (PHEA), and a series of random copolymers containing ethyl acrylate and hydroxyethyl acrylate monomeric units were tested in vitro as culture substrates and compared for their impact on the proliferation and expansion of Schwann cells (SCs). Immunocytochemical staining assay and scanning electron microscopy techniques were applied to perform a quantitative analysis to determine the correct maintenance of the cultured glial cells on the different biomaterials. The results strongly suggest that cell attachment and proliferation is influenced by the substrate's surface chemistry, and that hydrophobic biomaterials based on PMA, PEA, and the copolymers PEA and PHEA in a narrow composition window are suitable substrates to promote cell attachment and proliferation of SCs in vitro.

Kinetic study of thermal degradation of chitosan as a function of deacetylation degree.

Thermal degradation of chitosan with varying deacetylation degree (DD) ranging between 50 and 85% was analyzed by dynamic thermogravimetric analysis at different heating rates. The present study focused on the temperature range between 500 and 800K, above water evaporation. Thermal degradation showed a main degradation stage in this temperature interval with a second stage that appeared in the weight derivative curves as a shoulder in the high temperature side of the main peak with increasing intensity as the DD decreased. The Kissinger and isoconversional Ozawa-Flynn-Wall models were employed to evaluate the Ea of both thermal degradation processes. Different kinetic models were tested to computer simulate the thermogravimetric traces calculating the model parameters with a non-linear least squares fitting routine. The Sestack-Berggren model allowed reproducing accurately the overlapping of the two degradation mechanisms and calculating the mass fraction lost in each of them revealing the coupling between the two degradation mechanisms.

Prediction of the "in vivo" mechanical behavior of biointegrable acrylic macroporous scaffolds.

This study examines a biocompatible scaffold series of random copolymer networks P(EA-HEA) made of Ethyl Acrylate, EA, and 2-Hydroxyl Ethyl Acrylate, HEA. The P(EA-HEA) scaffolds have been synthesized with varying crosslinking density and filled with a Poly(Vinyl Alcohol), PVA, to mimic the growing cartilaginous tissue during tissue repair. In cartilage regeneration the scaffold needs to have sufficient mechanical properties to sustain the compression in the joint and, at the same time, transmit mechanical signals to the cells for chondrogenic differentiation. Mechanical tests show that the elastic modulus increases with increasing crosslinking density of P(EA-HEA) scaffolds. The water plays an important role in the mechanical behavior of the scaffold, but highly depends on the crosslinking density of the proper polymer. Furthermore, when the scaffold with hydrogel is tested it can be seen that the modulus increases with increasing hydrogel density. Even so, the mechanical properties are inferior than those of the scaffolds with water filling the pores. The hydrogel inside the pores of the scaffolds facilitates the expulsion of water during compression and lowers the mechanical modulus of the scaffold. The P(EA-HEA) with PVA shows to be a good artificial cartilage model with mechanical properties close to native articular cartilage.

MC3T3-E1 Cell Response to Ti1-xAgx and Ag-TiNx Electrodes Deposited on Piezoelectric Poly(vinylidene fluoride) Substrates for Sensor Applications.

In the sensors field, titanium based coatings are being used for the acquisition/application of electrical signals from/to piezoelectric materials. In this particular case, sensors are used to detect dynamic mechanical loads at early stages after intervention of problems associated with prostheses implantation. The aim of this work is to select an adequate electrode for sensor applications capable, in an initial stage to avoid bone cell adhesion, but at a long stage, permit osteointegration and osteoinduction. This work reports on the evaluation of osteoblast MC3T3-E1 cells behavior in terms of proliferation, adhesion and long-term differentiation of two different systems used as sensor electrodes: Ti1-xAgx and Ag-TiNx deposited by d.c. and pulsed magnetron sputtering at room temperature on poly(vinylidene fluoride) (PVDF). The results indicated an improved effect of Ag-TiNx electrodes compared with Ti1-xAgx and TiN, in terms of diminished cell adhesion and proliferation at an initial cell culture stage. Nevertheless, when cell culture time is longer, cells grown onto Ag-TiNx electrodes are capable to proliferate and also differentiate at proper rates, indicating the suitability of this coating for sensor application in prostheses devices. Thus, the Ag-TiNx system was considered the most promising electrode for tissue engineering applications in the design of sensors for prostheses to detect dynamic mechanical loads.

Design and validation of a biomechanical bioreactor for cartilage tissue culture.

Specific tissues, such as cartilage, undergo mechanical solicitation under their normal performance in human body. In this sense, it seems necessary that proper tissue engineering strategies of these tissues should incorporate mechanical solicitations during cell culture, in order to properly evaluate the influence of the mechanical stimulus. This work reports on a user-friendly bioreactor suitable for applying controlled mechanical stimulation--amplitude and frequency--to three-dimensional scaffolds. Its design and main components are described, as well as its operation characteristics. The modular design allows easy cleaning and operating under laminar hood. Different protocols for the sterilization of the hermetic enclosure are tested and ensure lack of observable contaminations, complying with the requirements to be used for cell culture. The cell viability study was performed with KUM5 cells.

Surface stiffening and enhanced photoluminescence of ion implanted cellulose - polyvinyl alcohol - silica composite.

Novel Cellulose (Cel) reinforced polyvinyl alcohol (PVA)-Silica (Si) composite which has good stability and in vitro degradation was prepared by lyophilization technique and implanted using N(3+) ions of energy 24keV in the fluences of 1×10(15), 5×10(15) and 1×10(16)ions/cm(2). SEM analysis revealed the formation of microstructures, and improved the surface roughness on ion implantation. In addition to these structural changes, the implantation significantly modified the luminescent, thermal and mechanical properties of the samples. The elastic modulus of the implanted samples has increased by about 50 times compared to the pristine which confirms that the stiffness of the sample surface has increased remarkably on ion implantation. The photoluminescence of the native cellulose has improved greatly due to defect site, dangling bonds and hydrogen passivation. Electric conductivity of the ion implanted samples was improved by about 25%. Hence, low energy ion implantation tunes the mechanical property, surface roughness and further induces the formation of nano structures. MG63 cells seeded onto the scaffolds reveals that with the increase in implantation fluence, the cell attachment, viability and proliferation have improved greatly compared to pristine. The enhancement of cell growth of about 59% was observed in the implanted samples compared to pristine. These properties will enable the scaffolds to be ideal for bone tissue engineering and imaging applications.

In vitro mechanical fatigue behavior of poly-ɛ-caprolactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel.

Polymeric scaffolds used in regenerative therapies are implanted in the damaged tissue and submitted to repeated loading cycles. In the case of articular cartilage engineering, an implanted scaffold is typically subjected to long-term dynamic compression. The evolution of the mechanical properties of the scaffold during bioresorption has been deeply studied in the past, but the possibility of failure due to mechanical fatigue has not been properly addressed. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. In this work fatigue studies of polycaprolactone scaffolds were carried by subjecting the scaffold to repeated compression cycles in conditions simulating the scaffold implanted in the articular cartilage. The behavior of the polycaprolactone sponge with the pores filled with a poly(vinyl alcohol) gel simulating the new formed tissue within the pores was compared with that of the material immersed in water. Results were analyzed with Morrow's criteria for failure and accurate fittings are obtained just up to 200 loading cycles. It is also shown that the presence of poly(vinyl alcohol) increases the elastic modulus of the scaffolds, the effect being more pronounced with increasing the number of freeze/thawing cycles.

An experimental fatigue study of a porous scaffold for the regeneration of articular cartilage.

The aim of this experimental study is to predict the long-term mechanical behavior of a porous scaffold implanted in a cartilage defect for tissue engineering purpose. Fatigue studies were performed by up to 100,000 unconfined compression cycles in a polycaprolactone (PCL) scaffold with highly interconnected pores architecture. The scaffold compliance, stress-strain response and hysteresis energy have been measured after different number of fatigue cycles, while the morphology has been observed by scanning electron microscopy at the same fatigue times. To simulate the growing tissue in the scaffold/tissue construct, the scaffold was filled with an aqueous solution of polyvinyl alcohol (PVA) and subjected to repeating cycles of freezing and thawing that increase the hydrogel stiffness. Fatigue studies show that the mechanical loading provokes failure of the dry scaffold at a smaller number of deformation cycles than when it is immersed in water, and also that 100,000 compressive dynamic cycles do not affect the scaffold/gel construct. This shows the stability of the scaffold implanted in a chondral defect and gives a realistic simulation of the mechanical performance from implantation of the empty scaffold to regeneration of the new tissue inside the scaffold's pores.