Measurement of the interconnected turgor pressure and envelope elasticity of live bacterial cells.

Turgor pressure and envelope elasticity of bacterial cells are two mechanical parameters that play a dominant role in cellular deformation, division, and motility. However, a clear understanding of these two properties is lacking because of their strongly interconnected mechanisms. This study established a nanoindentation method to precisely measure the turgor pressure and envelope elasticity of live bacteria. The indentation force-depth curves of Klebsiella pneumoniae bacteria were recorded with atomic force microscopy. Through combination of dimensional analysis and numerical simulations, an explicit expression was derived to decouple the two properties of individual bacteria from the nanoindentation curves. We show that the Young's modulus of bacterial envelope is sensitive to the external osmotic environment, and the turgor pressure is significantly dependent on the external osmotic stress. This method can not only quantify the turgor pressure and envelope elasticity of bacteria, but also help resolve the mechanical behaviors of bacteria in different environments.

Influence of Fimbriae on Bacterial Adhesion and Viscoelasticity and Correlations of the Two Properties with Biofilm Formation.

The surface polymers of bacteria determine the ability of bacteria to adhere to a substrate for colonization, which is an essential step for a variety of microbial processes, such as biofilm formation and biofouling. Capsular polysaccharides and fimbriae are two major components on a bacterial surface, which are critical for mediating cell-surface interactions. Adhesion and viscoelasticity of bacteria are two major physical properties related to bacteria-surface interactions. In this study, we employed atomic force microscopy (AFM) to interrogate how the adhesion work and the viscoelasticity of a bacterial pathogen, Klebsiella pneumoniae, influence biofilm formation. To do this, the wild-type, type 3 fimbriae-deficient, and type 3 fimbriae-overexpressed K. pneumoniae strains have been investigated in an aqueous environment. The results show that the measured adhesion work is positively correlated to biofilm formation; however, the viscoelasticity is not correlated to biofilm formation. This study indicates that AFM-based adhesion measurements of bacteria can be used to evaluate the function of bacterial surface polymers in biofilm formation and to predict the ability of bacterial biofilm formation.

Direct Measurement of Pore Dynamics and Leakage Induced by a Model Antimicrobial Peptide in Single Vesicles and Cells.

Antimicrobial peptides are promising therapeutic alternatives to counter growing antimicrobial resistance. Their precise mechanism of action remains elusive, however, particularly with respect to live bacterial cells. We investigated the interaction of a fluorescent melittin analogue with single giant unilamellar vesicles, giant multilamellar vesicles, and bilamellar Gram-negative Escherichia coli (E. coli) bacteria. Time-lapse fluorescence lifetime imaging microscopy was employed to determine the population distribution of the fluorescent melittin analogue between pore state and membrane surface state, and simultaneously measure the leakage of entrapped fluorescent species from the vesicle (or bacterium) interior. In giant unilamellar vesicles, leakage from vesicle interior was correlated with an increase in level of pore states, consistent with a stable pore formation mechanism. In giant multilamellar vesicles, vesicle leakage occurred more gradually and did not appear to correlate with increased pore states. Instead pore levels remained at a low steady-state level, which is more in line with coupled equilibria. Finally, in single bacterial cells, significant increases in pore levels were observed over time, which were correlated with only partial loss of cytosolic contents. These observations suggested that pore formation, as opposed to complete dissolution of membrane, was responsible for the leakage of contents in these systems, and that the bacterial membrane has an adaptive capacity that resists peptide attack. We interpret the three distinct pore dynamics regimes in the context of the increasing physical and biological complexity of the membranes.

Self-organization of bacterial biofilms is facilitated by extracellular DNA.

Twitching motility-mediated biofilm expansion is a complex, multicellular behavior that enables the active colonization of surfaces by many species of bacteria. In this study we have explored the emergence of intricate network patterns of interconnected trails that form in actively expanding biofilms of Pseudomonas aeruginosa. We have used high-resolution, phase-contrast time-lapse microscopy and developed sophisticated computer vision algorithms to track and analyze individual cell movements during expansion of P. aeruginosa biofilms. We have also used atomic force microscopy to examine the topography of the substrate underneath the expanding biofilm. Our analyses reveal that at the leading edge of the biofilm, highly coherent groups of bacteria migrate across the surface of the semisolid media and in doing so create furrows along which following cells preferentially migrate. This leads to the emergence of a network of trails that guide mass transit toward the leading edges of the biofilm. We have also determined that extracellular DNA (eDNA) facilitates efficient traffic flow throughout the furrow network by maintaining coherent cell alignments, thereby avoiding traffic jams and ensuring an efficient supply of cells to the migrating front. Our analyses reveal that eDNA also coordinates the movements of cells in the leading edge vanguard rafts and is required for the assembly of cells into the "bulldozer" aggregates that forge the interconnecting furrows. Our observations have revealed that large-scale self-organization of cells in actively expanding biofilms of P. aeruginosa occurs through construction of an intricate network of furrows that is facilitated by eDNA.

Atomic Force Microscopy Reveals the Mechanobiology of Lytic Peptide Action on Bacteria.

Increasing rates of antimicrobial-resistant medically important bacteria require the development of new, effective therapeutics, of which antimicrobial peptides (AMPs) are among the promising candidates. Many AMPs are membrane-active, but their mode of action in killing bacteria or in inhibiting their growth remains elusive. This study used atomic force microscopy (AFM) to probe the mechanobiology of a model AMP (a derivative of melittin) on living Klebsiella pneumoniae bacterial cells. We performed in situ biophysical measurements to understand how the melittin peptide modulates various biophysical behaviors of individual bacteria, including the turgor pressure, cell wall elasticity, and bacterial capsule thickness and organization. Exposure of K. pneumoniae to the peptide had a significant effect on the turgor pressure and Young's modulus of the cell wall. The turgor pressure increased upon peptide addition followed by a later decrease, suggesting that cell lysis occurred and pressure was lost through destruction of the cell envelope. The Young's modulus also increased, indicating that interaction with the peptide increased the rigidity of the cell wall. The bacterial capsule did not prevent cell lysis by the peptide, and surprisingly, the capsule appeared unaffected by exposure to the peptide, as capsule thickness and inferred organization were within the control limits, determined by mechanical measurements. These data show that AFM measurements may provide valuable insights into the physical events that precede bacterial lysis by AMPs.

Long-time-scale interaction dynamics between a model antimicrobial peptide and giant unilamellar vesicles.

The interaction dynamics between a lytic peptide and a biomembrane was studied using time-lapse fluorescence lifetime imaging microscopy. The model membrane was 1,2-dipalmitoyl-sn-glycero-3-phosphochloine giant unilamellar vesicles (GUVs), and the peptide was the K14 derivative of melittin, to which the polarity-sensitive fluorescent probe AlexaFluor 430 was grafted. The interaction of the peptide with the GUVs resulted in a progressive quenching of the fluorescence lifetime over a period of minutes. From previous photophysics characterization of the peptide, we were able to deconvolve the contribution of three distinct peptide states to the lifetime trajectory and use this data to develop a kinetics model for the interaction process. It was found that the peptide-membrane interaction was well described by a two-step mechanism: peptide monomer adsorption followed by membrane surface migration, assembly, and insertion to form membrane pores. There was an equilibrium exchange between pore and surface monomers at all lipid/peptide (L/P) concentration ratios, suggesting that the fully inserted phase was reached, even at low peptide concentrations. In contrast to previous studies, there was no evidence of critical behavior; irrespective of L/P ratio, lytic pores were the dominant peptide state at equilibrium and were formed even at very low peptide concentrations. We suggest that this behavior is seen in GUVs because their low curvature means low Laplace pressure. Membrane elasticity is therefore relatively ineffective at damping the thermal fluctuations of lipid molecules that lead to random molecular-level lipid protrusions and membrane undulations. The transient local membrane deformations that result from these thermal fluctuations create the conditions necessary for facile peptide insertion.

Shaming: A Concept Analysis.

Nurses in a variety of settings frequently use behavior modification strategies to promote health behavior change. Shaming is one such behavior modification tool, but its use in nursing is poorly understood. A concept analysis using Walker and Avant's method was performed. After an extensive literature review, a conceptual definition of shaming is proposed and defining attributes, antecedents, and consequences are presented. Shaming is also differentiated from related concepts often used synonymously such as stigmatization and incivility. Shaming as a behavior modification strategy is incongruous with nursing values and its utilization in nursing warrants further investigation.

Slow insertion kinetics during interaction of a model antimicrobial peptide with unilamellar phospholipid vesicles.

The mechanism of interaction between a model antimicrobial peptide and phospholipid unilamellar vesicle membranes was studied using fluorescence spectroscopy, fluorescence lifetime measurements, and light scattering. The peptide, a mellitin mutant, was labeled at position K14 with the polarity-sensitive probe AlexaFluor 430. The kinetics of the interaction of this derivative with various concentrations of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) vesicles was examined. Our work unveiled two novel aspects of peptide-lipid interactions. First, the AB plot or phasor analysis of the fluorescence lifetime studies revealed at least three different peptide states, the population of which depended on the lipid to peptide (L:P) concentration ratio. Second, complex fluorescence kinetics were observed over extended time-scales from 30 s to 2 h. The extended kinetics was only observed at particular lipid concentrations (L:P ratios 20:1 and 10:1) and not at others (30, 40, 50 and 100:1 L:P ratio). Analysis of the complex kinetics revealed several intermediates. We assign these to distinct states of the peptide formed during helix insertion into the vesicle membrane that are intermediate to lytic pore formation.

Structural dynamics of a lytic peptide interacting with a supported lipid bilayer.

The interaction of a melittin mutant with a 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC)-supported lipid bilayer was studied with the use of time-resolved evanescent wave-induced fluorescence spectroscopy (TREWIFS) and evanescent wave-induced time-resolved fluorescence anisotropy measurements (EW-TRAMs). The mutant peptide was labeled at position K14 with AlexaFluor 430 and retained the lytic activity characteristic of native melittin. The fluorescence decay kinetics of the conjugate was found to be biexponential with a short-lived component, τ(1), due to photoinduced electron transfer between AlexaFluor 430 and proximal side chains within or between the peptides. The longer-lived component, τ(2), was sensitive to the polarity of the microenvironment at or near the K14 position of the peptide. Upon interaction with a DPPC-supported bilayer, the proportional contribution of τ(1) increased, indicating a conformational change of the peptide. The values of τ(1) and τ(2) indicate that the AlexaFluor 430 probe experienced an environment with an equivalent polarity no less than that of methanol. EW-TRAMs data from the melittin mutant revealed hindered rotational motions of the AlexaFluor 430 probe both in the plane and perpendicular to the plane of the supported lipid bilayer. The data indicate a highly ordered and polar environment near the center of the melittin helix consistent with the formation of a toroidal pore.

Spatially resolved force spectroscopy of bacterial surfaces using force-volume imaging.

Force spectroscopy using the atomic force microscope (AFM) is a powerful technique for measuring physical properties and interaction forces at microbial cell surfaces. Typically for such a study, the point at which a force measurement will be made is located by first imaging the cell using AFM in contact mode. In this study, we image the bacterial cell Shewanella putrefaciens for subsequent force measurements using AFM in force-volume mode and compare this to contact-mode images. It is known that contact-mode imaging does not accurately locate the apical surface and periphery of the cell since, in contact mode, a component of the applied load laterally deforms the cell during the raster scan. Here, we illustrate that contact-mode imaging does not accurately locate the apical surface and periphery of the cell since, in contact mode, a component of the applied load laterally deforms the cell during the raster scan. This is an artifact due to the deformability and high degree of curvature of bacterial cells. We further show that force-volume mode imaging avoids the artifacts associated with contact-mode imaging due to surface deformation since it involves the measurement of a grid of individual force profiles. The topographic image is subsequently reconstructed from the zero-force height (the contact distance between the AFM tip and the surface) at each point on the cell surface. We also show how force-volume measurements yield applied load versus indentation data from which mechanical properties of the cell such as Young's modulus, cell turgor pressure and elastic and plastic energies can be extracted.

Interactions of a lytic peptide with supported lipid bilayers investigated by time-resolved evanescent wave-induced fluorescence spectroscopy.

We report investigations, using time-resolved and polarised evanescent wave-induced fluorescence methods, into the location, orientation and mobility of a fluorescently labelled form of the antimicrobial peptide, melittin, when it interacts with vesicles and supported lipid bilayers (SLBs). This melittin analogue, termed MK14-A430, was found to penetrate the lipid headgroup structure in pure, ordered-phase DPPC membranes but was located near the headgroup-water region when cholesterol was included. MK14-A430 formed lytic pores in SLBs, and an increase in pore formation with incubation time was observed through an increase in polarity and mobility of the probe. When associated with the Cholesterol-containing SLB, the probe displayed polarity and mobility that indicated a population distributed near the lipid headgroup-water interface with MK14-A430 arranged predominantly in a surface-aligned state. This study indicates that the lytic activity of MK14-A430 occurred through a pore-forming mechanism. The lipid headgroup environment experienced by the fluorescent label, where MK14-A430 displayed pore information, indicated that pore formation was best described by the toroidal pore model.

Stigmergy co-ordinates multicellular collective behaviours during Myxococcus xanthus surface migration.

Surface translocation by the soil bacterium Myxococcus xanthus is a complex multicellular phenomenon that entails two motility systems. However, the mechanisms by which the activities of individual cells are coordinated to manifest this collective behaviour are currently unclear. Here we have developed a novel assay that enables detailed microscopic examination of M. xanthus motility at the interstitial interface between solidified nutrient medium and a glass coverslip. Under these conditions, M. xanthus motility is characterised by extensive micro-morphological patterning that is considerably more elaborate than occurs at an air-surface interface. We have found that during motility on solidified nutrient medium, M. xanthus forges an interconnected furrow network that is lined with an extracellular matrix comprised of exopolysaccharides, extracellular lipids, membrane vesicles and an unidentified slime. Our observations have revealed that M. xanthus motility on solidified nutrient medium is a stigmergic phenomenon in which multi-cellular collective behaviours are co-ordinated through trail-following that is guided by physical furrows and extracellular matrix materials.

Postsynthesis vapor-phase functionalization of MCM-48 with hexamethyldisilazane and 3-aminopropyldimethylethoxylsilane for bioseparation applications.

MCM-48 was surface modified via vapor-phase reactions with hexamethyldisilazane (CH(3)-MCM-48) and 3-aminopropyldimethylethoxysilane (NH(2)-MCM-48). (29)Si NMR confirmed that the resulting materials contained covalently attached trimethylsilane and 3-aminopropyldimethylsilane moieties, both important functionalities for bioseparation applications. The surface coverage was approximately 1.8 and 0.9 groups per nm(2), respectively. The X-ray diffraction patterns and the narrow pore size distributions obtained from the gas sorption isotherms showed that the modified materials retained the characteristic pore structure of the underlying MCM-48 material. CH(3)-MCM-48 exhibited significantly improved hydrolytic stability over the unmodified MCM-48 under the aqueous conditions tested, whereas NH(2)-MCM-48 appeared to be less stable than the unmodified MCM-48. The decrease in stability is most likely due to the nature of the attachment of the 3-aminopropyldimethylsilane moiety, where the conversion of surface silanol groups is limited by H bonding with the amino end, leading to a 50% lower surface concentration and resulting in an increased likelihood of nucleophilic attack on the silica surface, enhancing the rate of hydrolysis. Hexamethyldisilazane thus appears to be a superior functional group for modifying the MCM-48 surface.

Role of Capsular Polysaccharides in Biofilm Formation: An AFM Nanomechanics Study.

Bacteria form biofilms to facilitate colonization of biotic and abiotic surfaces, and biofilm formation on indwelling medical devices is a common cause of hospital-acquired infection. Although it is well-recognized that the exopolysaccharide capsule is one of the key bacterial components for biofilm formation, the underlying biophysical mechanism is poorly understood. In the present study, nanomechanical measurements of wild type and specific mutants of the pathogen, Klebsiella pneumoniae, were performed in situ using atomic force microscopy (AFM). Theoretical modeling of the mechanical data and static microtiter plate biofilm assays show that the organization of the capsule can influence bacterial adhesion, and thereby biofilm formation. The capsular organization is affected by the presence of type 3 fimbriae. Understanding the biophysical mechanisms for the impact of the structural organization of the bacterial polysaccharide capsule on biofilm formation will aid the development of strategies to prevent biofilm formation.

AFM lateral force calibration for an integrated probe using a calibration grating.

Atomic force microscopy (AFM) friction measurements on hard and soft materials remain a challenge due to the difficulties associated with accurately calibrating the cantilever for lateral force measurement. One of the most widely accepted lateral force calibration methods is the wedge method. This method is often used in a simplified format but in so doing sacrifices accuracy. In the present work, we have further developed the wedge method to provide a lateral force calibration method for integrated AFM probes that is easy to use without compromising accuracy and reliability. Raw friction calibration data are collected from a single scan image by continuous ramping of the set point as the facets of a standard grating are scanned. These data are analysed to yield an accurate lateral force conversion/calibration factor that is not influenced by adhesion forces or load deviation. By demonstrating this new calibration method, we illustrate its reliability, speed and ease of execution. This method makes accessible reliable boundary lubrication studies on adhesive and heterogeneous surfaces that require spatial resolution of frictional forces.

Imaging the action of antimicrobial peptides on living bacterial cells.

Antimicrobial peptides hold promise as broad-spectrum alternatives to conventional antibiotics. The mechanism of action of this class of peptide is a topical area of research focused predominantly on their interaction with artificial membranes. Here we compare the interaction mechanism of a model antimicrobial peptide with single artificial membranes and live bacterial cells. The interaction kinetics was imaged using time-lapse fluorescence lifetime imaging of a fluorescently-tagged melittin derivative. Interaction with the synthetic membranes resulted in membrane pore formation. In contrast, the interaction with bacteria led to transient membrane disruption and corresponding leakage of the cytoplasm, but surprisingly with a much reduced level of pore formation. The discovery that pore formation is a less significant part of lipid-peptide interaction in live bacteria highlights the mechanistic complexity of these interactions in living cells compared to simple artificial systems.

Stigmergy: A key driver of self-organization in bacterial biofilms.

Bacterial biofilms are complex multicellular communities that are often associated with the emergence of large-scale patterns across the biofilm. How bacteria self-organize to form these structured communities is an area of active research. We have recently determined that the emergence of an intricate network of trails that forms during the twitching motility mediated expansion of Pseudomonas aeruginosa biofilms is attributed to an interconnected furrow system that is forged in the solidified nutrient media by aggregates of cells as they migrate across the media surface. This network acts as a means for self-organization of collective behavior during biofilm expansion as the cells following these vanguard aggregates were preferentially confined within the furrow network resulting in the formation of an intricate network of trails of cells. Here we further explore the process by which the intricate network of trails emerges. We have determined that the formation of the intricate network of furrows is associated with significant remodeling of the sub-stratum underlying the biofilm. The concept of stigmergy has been used to describe a variety of self-organization processes observed in higher organisms and abiotic systems that involve indirect communication via persistent cues in the environment left by individuals that influence the behavior of other individuals of the group at a later point in time. We propose that the concept of stigmergy can also be applied to describe self-organization of bacterial biofilms and can be included in the repertoire of systems used by bacteria to coordinate complex multicellular behaviors.

Resonance energy-transfer studies of the conformational change on the adsorption of oligonucleotides to a silica interface.

Time-resolved evanescent wave-induced fluorescence studies have been carried out on a series of fluorescently labeled oligonucleotide sequences adsorbed to a silica surface from solution. The fluorescence decay profiles of a fluorescent energy donor group undergoing resonance energy transfer to a nonemissive energy-acceptor molecule have been analyzed in terms of a distribution of donor-acceptor distances to reveal the conformational changes that occur in these oligonucleotides upon adsorption. Evanescent wave-induced time-resolved Förster resonance energy-transfer (EW-TRFRET) measurements indicate that at a high electrolyte concentration, there is localized separation of the oligonucleotide strands, and the helical structure adopts an "unraveled" conformation as a result of adsorption. This is attributed to the flexibility within the oligonucleotide at high electrolyte concentration allowing multiple segments of the oligonucleotide to have direct surface interaction. In contrast, the EW-TRFRET measurements at a lower electrolyte concentration reveal that the oligonucleotide retains its helical conformation in a localized extended state. This behavior implies that the rigidity of the oligonucleotide at this electrolyte concentration restricts direct interaction with the silica to a few segments, which correspondingly introduces kinks in the double helix conformation and results in significant oligonucleotide segmental extension into solution.

Coupled electrostatic, hydrodynamic, and mechanical properties of bacterial interfaces in aqueous media.

The interactions of bacteria with their environment are governed by a complex interplay between biological and physicochemical phenomena. The main challenge is the joint determination of the intertwined interfacial characteristics of bacteria such as mechanical and hydrodynamic softness, interfacial heterogeneity, and electrostatic properties. In this study, we have combined electrokinetics and force spectroscopy to unravel this intricate coupling for two types of Shewanella bacterial strains that vary according to the nature of their outer, permeable, charged gel-like layers. The theoretical interpretation of the bacterial electrokinetic response allows for the estimation of the hydrodynamic permeability, degree of interfacial heterogeneity, and volume charge density for the soft layer that constitutes the outer permeable part of the bacteria. Additionally, the electrostatic interaction forces between an AFM probe and the bacteria were calculated on the basis of their interfacial properties obtained from advanced soft particle electrokinetic analysis. For both bacterial strains, excellent agreement between experimental and theoretical force curves is obtained, which highlights the necessity to account for the interfacial heterogeneity of the bioparticle to interpret AFM and electrokinetic data consistently. From the force profiles, we also derived the relevant mechanical parameters in relation to the turgor pressure within the cell and the nature of the bacterial outer surface layer. These results corroborate the heterogeneous representation of the bacterial interface and show that the decrease in the turgor pressure of the cell with increasing ionic strength is more pronounced for bacteria with a thin surface gel-like layer.