The role of radiological subacromial distance measurements in the subacromial impingement syndrome.

Subacromial impingement is one of the most common causes of painful shoulder in the middle aged and elderly population. Since Neer's first description of the process, many investigators have researched this condition in an effort to gain a better understanding of the disease etiology. The aim of this study was to investigate the relationship between the radiological subacromial distance measurements and the subacromial impingement syndrome in a series of patients from our institution. For this purpose, 44 patients scheduled for a unilateral shoulder arthroscopy were investigated prospectively. The acromio-glenoid angle, supraspinatus-glenoid angle (from coronal MR images) and acromial index (from true anterior-posterior shoulder X-ray images) were measured as the implications of the subacromial distance, and the degree of subacromial impingement was graded according to intraoperative findings. Statistical data analysis revealed no significant correlations between the radiological measurements and the severity of subacromial impingement (p > 0.05). On the other hand, there was a significant correlation (p = 0.0049) between the patient age and subacromial impingement. These results suggest that the radiological subacromial distance measurements do not have enough clinical significance as predictive markers in the subacromial impingement syndrome.

[The effect of low-molecular-weight heparin on rat tendon healing]. / Düsük molekül agirlikli heparinin siçan tendon iyilesmesi üzerine etkisi.

OBJECTIVES: We investigated the effect of low-molecular-weight heparin (LMWH) on the healing of tendons. METHODS: Forty-five adult Wistar rats weighing 300 g were randomized into three groups equal in number. All the rats underwent full-thickness surgical incision of the Achilles tendon followed by primary repair. After the operation, two groups received daily subcutaneous LMWH injections (nadroparin calcium) for four weeks at high or low doses (group I, 6 mg/kg, 170 IU AXa; group II, 3 mg/kg, 85 IU AXa). Group III remained untreated as the control group. Histologically, the specimens were examined under light and electron microscopy with regard to the amount of fibrillar collagen synthesis, mitochondrial degeneration, and the composition of the extracellular matrix collagen. Biomechanically, maximum load to failure and correspondent elongation of the tendons were measured. RESULTS: Compared to the control group, histologically, both LMWH-treated groups exhibited increased number of fibroblasts, increased fibrillar collagen formation in the extracellular matrix, and higher counts of granular endoplasmic reticula in cytoplasmic contents of fibroblasts as well as decreased mitochondrial vacuolization and degeneration. Biomechanical assessments showed that tendons in group I had significantly higher maximum load to failure and elongation values than group II and III (31 N vs. 24.6 N and 23.1 N; 25 mm vs. 19.6 mm and 17.3 mm, respectively; p<0.05). Groups II and III did not differ significantly in this respect (p>0.05). CONCLUSION: Daily administration of single dose LMWH improves tendon healing through increasing the number of fibroblasts and fibrillar collagen synthesis and decreasing mitochondrial degeneration.

Postoperative mechanical alignment analysis of total knee replacement patients operated with 3D printed patient specific instruments: A Prospective Cohort Study.

OBJECTIVE: Total knee replacement (TKR) is a surgical treatment for final stage gonarthrosis. The lifespan of the prosthetic implants used in TKR surgery is a major interest for the orthopaedic research community.Previously, proper implant alignment of the implants has been advocated for longevity of the TKR surgery. Recently, patient-specific (PSI) instruments have been proposed to improve the mechanical alignment of the TKR by permitting better implant positioning over conventional TKR surgery. The aim of this study is to compare the mechanical alignment results of patients operated with PSIs and conventional instruments. METHODS: Two groups of 20 patients chosen in a quasi-random manner have been compared in this study. In the first group femoral distal and tibial osteotomies were made by a PSI which was produced by the patients' computed tomography scans. All osteotomies in the control group were made with the TKR set's routine instruments by conventional means. Patients' preoperative and postoperative mechanical femorotibal angles (mFTA), femoral coronal angles (FCA), tibial coronal angles (TCA) were measured and the number of outliers which showed more than 3° of malalignment were counted in both groups for comparison. RESULTS: The average postoperative mFTA was found to be 2.09° for the PSI group and in was found to be 2.84° for the control which was not statistically significant. The comparison of postoperative FCA and TCA also did not show significant difference between the groups. The number of outliers showing more than 3° of malalignment per group were found to be 1 out of 20 (5%) for the PSI group and 7 out of 20 (35%) for the control which was statistically significant. CONCLUSION: In this study patient-specific instrumentation provided significantly better mechanical alignment compared to conventional TKR for the frequency of outlier cases with malalignment beyond 3°. PSI proved no significant difference when the groups were compared for mFTA, FCA and TCA. Our findings support that PSI may improve TKR alignment by improving the ratio of the outlier patients with marked malalignment. LEVEL OF EVIDENCE: Level III, Therapeutic Study.

The effect of tourniquet usage on cement penetration in total knee arthroplasty: A prospective randomized study of 3 methods.

BACKGROUND: It is a randomized study to compare cement penetration on x-rays after total knee arthroplasty (TKA) among 3 different ways to use tourniquets; application during the surgery, application only with implantation prosthesis and with no tourniquet use. METHODS: A total 69 knees of 59 patients were included in the study in a quasirandom manner. Each patient had physical exams and standard radiographic evaluations at 6 weeks after the TKA procedure. Outcome evaluations included visual analog scale (VAS) scores, Knee Society Scores (KSS), blood transfusion, and drainage status after surgery for all groups. For radiographic review, the tibial plateau was divided into zones in the anterior-posterior and lateral views, according to the Knee Society Scoring System. RESULTS: The average age of the patients who were eligible for the study was 65.05 (range 46-81) years. All 59 patients included in the study were female patients. Group 1 consisted of 24 patients who had TKA with use of a tourniquet during the entire operation. Group 2 consisted of 20 patients who had TKA with use of tourniquet only at the time of cementing and group 3 consisted of 25 patients with no use tourniquet. There is no significant difference in early cement penetration among the groups (group 1 2.50 mm, group 2 2.28 mm, group 3 2.27 mm; group 1 vs 2 P = .083, group 1 vs 3 P = .091, group 2 vs 3 P = .073). There is no significant difference for postoperative drainage among the 3 groups (group 1 245 mL, group 2 258.76 mL, group 3 175.88 mL; group 1 vs 2 P = .081, group 1 vs 3 P = .072, group 2 vs 3 P = .054). There was no need to transfuse more than 1 unit in any patient. The VAS score was significantly higher (group 1 3.58, group 2 1.55, group 3 1.52; group 1 vs 2 P = .022, group 1 vs 3 P = .018, group 2 vs 3 P = .062) and KSS was significantly lower in the tourniquet group (group 1 63, group 2 79, group 3 82; group 1 vs 2 P = .017, group 1 vs 3 P = .02, group 2 vs 3 P = .082). CONCLUSION: We do not suggest long-duration tourniquet use, which can lead higher pain scores and reduce functional recovery after total knee arthroplasty.

Role of a combination dietary supplement containing mucopolysaccharides, vitamin C, and collagen on tendon healing in rats.

OBJECTIVE: The aim of this study was to investigate the effect of mucopolysaccharide, vitamin C, and collagen supplementation on the healing of Achilles tendon in rats. METHODS: Sixteen rats were separated into 2 groups. Both Achilles tendons of all rats were transected 5 mm above the insertion and repaired using a Kessler suture. After the surgical repair, the study group received the daily recommended amount of the supplement by gastric gavage, while the control group received a placebo. At the end of the third week, the animals were sacrificed. The biomechanical properties of the groups were compared with ultimate tensile strength and stiffness tests. The biological properties of the 2 groups were assessed with a histomorphometric comparison to determine the amount of collagen type I (COL1), proliferating cell nuclear antigen (PCNA), and transforming growth factor ß1 (TGF-ß1) expression in 3 different tissue subgroups (collagen matrix, tenocytes, and endotenon fibroblasts). RESULTS: Analysis of histomorphometric results revealed that the rats receiving dietary supplements demonstrated a significant increase in PCNA (mean value of 86 in the control group and 168.85 in the trial group; p < 0.05) and TGF-ß1 (mean value of 87.57 in the control group and 161.85 in the trial group; p < 0.05) in the endotenon fibroblasts of the repair site. However, there was no difference between the groups in PCNA or TGF-ß1 when the collagen matrix and the tenocytes of the repair site were examined. Furthermore, no significant difference could be found between groups in COL1 in any of the 3 tissue subgroups (collagen matrix, tenocytes, and endotenon fibroblasts). The statistical analysis also indicated that the rats receiving supplements did not demonstrate a significant increase in the ultimate tendon tensile strength or stiffness. CONCLUSION: The results of this study revealed no advantage to the oral administration of the trial supplement in collagen synthesis or biomechanical properties in rats after 3 weeks using the presented study design. However, the increased expression of PCNA and TGFß1 seen in the endotenon fibroblasts of the repair site might play a role in the continuum of tendon healing.

Does pedicle screw density matter in Lenke type 5 adolescent idiopathic scoliosis?

The aim of this study is to compare the effects of high versus low implant density on correction in Lenke type 5 adolescent idiopathic scoliosis (AIS) patients. A retrospective study of 59 Lenke type 5 AIS patients treated at a single institution were divided into to 2 groups according to implant density. Implant density, preoperative, early postoperative, and last follow-up thoracolumbar/lumbar (TL/L) curves were measured. Thirty-one constructs were high and 28 constructs were low density. The groups were similar in terms of age, sex, Cobb angle, and follow-up time. Mean implant density in low density group and high density group was 75.4% and 96.6%, respectively. High versus low-density comparison showed that there is no significant difference with regard to curve correction in early postoperative and last follow-up periods. The results show that pedicle screw density being low or high, does not affect curve correction rates in the short and long term in our patients.

Comparison of spinal sagittal parameters by time of day in a healthy working population: Do we bend during the day?

BACKGROUND: Prospective study. OBJECTIVE: To determine the change in spinal sagittal parameters which may occur throughout the day in healthy population. METHODS: Thirty-five healthy hospital employees were enrolled in the study. Two standing left lateral orthoroentgenograms were obtained at 8.00 a.m and at 6.00 p.m. Six spinopelvic parameters were measured on the X-rays. Thereafter, the subjects were divided into two cohorts according to their BMI as low BMI and high BMI. RESULTS: Thirty-five subjects with a mean age of 25.97 ± 8.21 were evaluated. No significant change was found between morning and evening measurements for any of the parameters. Direct relationship was shown between thoracic kyphosis (TK) and lumbar lordosis (LL), lumbar lordosis and sacral slope (SS), pelvic tilt (PT) and pelvic incidence (PI) minus lumbar lordosis, sagittal vertebral axis (SVA) and pelvic incidence minus lumbar lordosis. In addition an inverse relationship was found between sacral slope and pelvic tilt, sacral slope and pelvic incidence minus lumbar lordosis, thoracic kyphosis and pelvic incidence minus lumbar lordosis, sacral slope and pelvic tilt, sagittal vertebral axis and lumbar lordosis (p< 0.05). Sagittal vertebral axis were found to be higher in the high BMI group, and daily change was lower but the differences were not statistically significant. Only the change in pelvic tilt value was found to be statistically significant in low BMI group. CONCLUSION: Routine workload in a hospital environment does not cause significant change in the spinopelvic parameters throughout the day.

Quantitative comparison of a laterally misplaced pedicle screw with a re-directed screw. How much pull-out strength is lost?

OBJECTIVE: Redirecting of a laterally misplaced pedicle screw into the accurate position decreases the pull-out strength due to the reinsertion, lateral wall cortical perforation and widening of the pedicle hole. Thus, this biomechanical study was performed to quantitatively analyze the pullout strength of a redirected laterally misplaced pedicle screw into the accurate position. METHODS: Thirty pedicules of 15 bovine vertebrae were separated to 3 groups, according to the screw placement method: 1) standard flawless trajectory; 2) trajectory with lateral pedicle wall perforation; 3) trajectory with lateral wall perforation redirected to the standard trajectory. Samples were placed on a universal testing machine and pullout loads were measured. Kruskal-Wallis test was utilized within 95% confidence interval and p value <0.05 to test for the statistical significance. RESULTS: The mean pullout strength was 2891±654,2 N(1383-3814,5) in Group 1; 817,8±227,6 N(308,6-1144,9) in Group 2 and 2081,1±487,7 N(1583,5-2962,5) in Group 3. The results found out to be statistically significant (p<0.05). Inter-group comparisons revealed that lateral pedicle wall perforation significantly decreases the pullout strength (p<0.05) and redirection of the screw increases the strength (p<0.05), however it was still weaker than the screws with flawless standard trajectory but this was not statistically significant (p>0.05). CONCLUSION: The results of this study confirm that pullout strength of pedicle screw decreases by approximately 71% when the lateral wall is perforated and decreases 28% after redirection to the accurate position.

Investigation of efficacy of treatment in spinal cord injury: Erythropoietin versus methylprednisolone.

BACKGROUND: Investigation of the expression of platelet-derived growth factor (PDGF)-ß and glial fibrillary acidic protein (GFAP) in rats with spinal cord injury as a marker of neurologic recovery between groups treated with erythropoietin (EPO) and methylprednisolone (MP). METHODS: Thirty adult female rats were randomly divided into three even groups. A laminectomy was applied to thoracic ninth vertebra and contusion injury was induced by extradural application of an aneurysm clip. Group 1 rats received one-time intrathecal administration of normal saline, group 2 rats received MP, and group 3 rats received EPO. Motor neurological function was evaluated by the Basso, Beattie, and Bresnahan (BBB) locomotor rating scale. Thirty days after the surgery, T8-10 segments of the spinal cords were extracted and the immunohistochemical assay revealed the number of PDGF-ß- and GFAP-positive cells. RESULTS: Evaluation of the last control animal showed that BBB score in the EPO group showed an increase from 1 to 12 ( p < 0.05). The immunohistochemical assay revealed that the number of PDGF-ß- and GFAP-positive cells was significantly higher in EPO group ( p = 0.000) when compared to MP and control groups. After studying the effect of PDGF-ß expression on the locomotor function, we determined that PDGF-ß expression and locomotor function after a spinal injury has a strong relationship ( p < 0.05). CONCLUSION: EPO seems to better increase the expression of PDGF-ß, thus produce better results in locomotor functions when compared to MP.

Analysing the change of sagittal balance in patients with Lenke 5 idiopathic scoliosis.

OBJECTIVE: The aim of this study was to evaluate preoperative and postoperative spinopelvic parameters and the influence of lowest instrumented vertebrae on sagittal parameters in Lenke 5 Adolescent Idiopathic Scoliosis (AIS) patients. METHODS: A total of 42 patients (37 females, 5 males; mean age: 16.71 ± 3.46 years) were included in the study. Preoperative and postoperative last follow up lumbar lordosis (LL), thoracic kyphosis (TK), pelvic tilt (PT), pelvic incidence (PI) and sacral slope (SS) angles measured. By stopped fusion in L3, L4 or L5 we divided the group into three parts. RESULTS: Mean follow-up was 43 months. Preoperatively, the mean TK and LL were 36.8° and 55.3°. At the last follow up, the mean TK and LL were 27.1° and 49.0° degrees, respectively. Preoperatively, the mean PI, PT and SS were 53.3°, 16.1° and 37.4° degrees. At the last follow up, the mean PI, PT and SS were 52.7°, 19.9° and 33.0° respectively. Significant differences were observed for SS (p = 0.003), TK (p = 0.004), LL (p = 0.012) and PT (p = 0.013) postoperatively for all patients. According the L3 and L4 groups there is significant difference in SS, LL (p = 0.013) and PT (p = 0.018) which means a significant decrease occurs in SS and LL when the distal fusion level changes from L3 to L4 but significant increase in PT in L3 group to compensate spinopelvic change after surgery. CONCLUSION: The selection of more distal level for fusion adversely affects the compensation mechanisms of sagittal balance in Lenke 5 AIS patients. LEVEL OF EVIDENCE: Level IV, Therapeutic study.

A new osteotomy for the prevention of prominent lateral condyle after cubitus varus correctional surgery-made possible by a 3D printed patient specific osteotomy guide: A case report.

INTRODUCTION: Skeletal deformity correction is a procedure of high aesthetic and functional demand. Therefore, meticulous surgical planning has always been mandatory. However, it is known that during the surgery things may often get slippery, leaving the surgeon no chance but improvisation. Because of this shortcoming it is not a rare occasion to find unhappy patients that have undergone deformity correction surgery. PRESENTATION OF CASE: Our patient was an eighteen-year-old male who had 40° cubitus varus deformity (with 20° flexion and extension deficits) due to a right humerus supracondylar fracture, obtained eight years ago. He had two prior surgeries at the year of injury. Considering the severity of the deformity we decided to plan the surgery with 3D software, obtain 3D printed models (to further help with surgical fixation options) and finally, use a custom 3D printed resection guide to apply the plan during the surgery. DISCUSSION: Traditional methods of skeletal deformity correction lack the preoperative precision and tools to perform the plan during the surgery. Deformity correction with 3D images and 3D printed patient specific instruments do help the surgeon to accomplish correct deformities with results identical to surgical plan. CONCLUSION: Superior precision of the 3D planning and very easy utilization of the patient specific 3D printed instruments during the skeletal deformity surgery provides unparalleled and foreseeable results. This methodology is prone to be gold standard for deformity surgery in the near future.

Comparison of fixation techniques in Vancouver type AG periprosthetic femoral fracture: a biomechanical study.

OBJECTIVE: The purpose of this study was to biomechanically compare cable, trochanteric grip plate, and locking plate techniques in Vancouver type AG fracture model in an in vitro test environment. METHODS: Fifteen pieces of fourth-generation synthetic femora were separated into 3 groups of 5 models each. A greater trochanteric fracture model was created after femoral stem implantation. Group 1 was fixated with only cable, Group 2 with trochanteric grip plate, and Group 3 with locking plate. Horizontal stiffness, axial stiffness, and failure loads were compared between the groups. RESULTS: In horizontal compression tests, Group 3 had the highest values, but the only statistically significant difference was between the locking plate group and cable group. Axial distraction test results showed that mean stiffness of Group 1 was 94.6±9.44 N/mm, that of Group 2 was 174.8±28.64 N/mm, and that of Group 3 was 185.6±71.64 N/mm. While locking plate versus cable fixation and grip plate fixation versus cable fixation showed statistically significant differences (p<0.05), comparison of locking plate versus grip plate fixation showed no statistically significant difference (p>0.05). In axial failure load test, Group 3 had the highest results. The only significant difference was between the locking plate and cable groups (p<0.05). CONCLUSION: In Vancouver type AG fractures stable fixation may be achieved with grip plate fixation and locking plates, with the former ensuring more stable osteosynthesis.

Comparison of effectiveness of kyphoplasty and vertebroplasty in patients with osteoporotic vertebra fractures.

OBJECTIVE: The aim of this study was to compare the functional and radiological outcomes of vertebroplasty and kyphoplasty in patients with osteoporotic vertebra fractures. METHODS: The files of the patients who underwent vertebroplasty or kyphoplasty for osteoporotic vertebrae fractures were retrieved from the archives. Forty-three patients with complete follow-up data were included in the study group. The patients were evaluated for radiological outcomes in terms of local kyphosis angle, wedging index, compression ratio, visual analog pain scale (VAS) and Oswestry Disability Index (ODI). RESULTS: In the study group, kyphoplasty was performed on 24 vertebrae of 22 patients (17 females, 5 males; mean age: 73 years) whereas vertebroplasty was applied on 24 vertebrae of 21 (16 females, 5 males; mean age: 74.7 years) patients. The mean follow-up time was 26 months. When the VAS and ODI values of the groups were analyzed, both groups showed statistically significant progress after the operation. Radiological data showed that the kyphoplasty group showed statistically significant improvement in the sagittal index values whereas the vertebroplasty group did not. The overall complication ratio was 4%. CONCLUSION: Both vertebroplasty and kyphoplasty are effective treatment methods for functional recovery and pain relief in osteoporotic fractures of the vertebra. Although radiological outcomes of the kyphoplasty seem to be better, this does not have any clinical relevance. We suggest vertebroplasty over kyphoplasty since it is an easier method to manage. LEVEL OF EVIDENCE: Level III, Therapeutic study.

Periosteal adventitia is a valuable bone graft alternative.

BACKGROUND: Periosteal adventitia is believed to consist of fibrous tissue without any regenerative potential. This theory results in the assumption that surgically stripped periosteum which is also adventitial has no bone regeneration potential. We decided to test whether the periosteal adventitia is osteoinductive and whether it is suitable for a commonly faced clinical situation in an animal model. METHODS: This study used 24 femurs from 12 rabbits, which were separated into 3 groups. Lateral femoral condylar cavitary defects were created with a 5 mm drill bit. In group I, the defects were left empty as the control. In group II, the defects were only filled with ceramic graft particles. In group III, the defects were filled with a mixture of ceramic graft particles and autogenous, adventitial, periosteal particles. All animals were sacrificed at the end of the 6th week and were evaluated histologically. RESULTS: The microscopy of 3 different histologists suggested that group III had far superior healing when compared to the control group and group II. The statistical evaluation of the histomorphometrically gathered quantitative results revealed a meaningful increase in woven bone and a decrease in fibrous tissue in group III, confirming the histological analysis. CONCLUSIONS: In this study we observed that the composite graft obtained by mixing ceramics and free adventitial periosteal grafts offers healing potential surpassing both the ceramic-only group as well as the control group. We conclude that adventitial periosteal graft greatly facilitates new bone formation.

Demineralized bone matrix and hydroxyapatite/tri-calcium phosphate mixture for bone healing in rats.

PURPOSE: Hydroxyapatite/tri-calcium phosphate (HA/TCP) mixture is an osteoconductive material used as a bone graft substitute, and demineralised bone matrix (DBM) is an osteoinductive material. A combination of DBM and HA/TCP mixture would probably create a composite with both osteoconductive and osteoinductive properties. The purpose of this study was to determine the effect of the combination of DBM and HA/TCP mixture on healing of rat radius segmental defects. METHODS: Twenty-four adult male Wistar rats were used. Bilateral radial defects were created in each animal. Radial defects were implanted with DBM, HA/TCP mixture and a combination of both substances. Control defects were left unfilled. Ten weeks after implantation, the animals were sacrificed, and the radii were evaluated by radiograhic and histopathological studies. RESULTS: The use of DBM alone demonstrated improved healing on radiographic and histological studies compared to other groups and the control group. There were no differences between the other two groups and the control group. CONCLUSION: The DBM group showed the best healing response. Combined use of DBM and HA/TCP mixture did not improve bone healing, and the osteoinductive properties of DBM were inhibited by HA/TCP mixture.