Effect of dry and wet finishing and polishing on color change and opacity of nanofill and nanohybrid composites.

BACKGROUND: As superior esthetic is one of the main reasons for using composite resins, it is very important to be familiar with factors and techniques affecting their optical properties and appearance. AIM: The aim of this study was comparing the effect of finishing and polishing with and without water coolant, on the color change and opacity of composite resin materials. METHODS: Composites used for preparing samples were Z250 (microhybrid), Z350XT (nanofilled), and Z550 (nanohybrid). Then divided into 4 groups of 5 depending on finishing and polishing technique (dry or wet) and time (immediate and after twenty-four hours). After polishing, samples were assessed using a spectrophotometer. Color change and opacity were determined. Data was analyzed using Kolmogorov-Smirnov, ANOVA and Tukey HSD tests. RESULTS: Type of material at both time had a significant effect on ΔE and opacity. Our results in dry and wet technique immediately(T0) showed that the highest and lowest ΔE and opacity belong to Z350XT (p < 0.001). After Twenty-four hours (T24), opacity of Z250 in wet condition was higher than dry condition (p < 0.001). CONCLUSIONS: Wet or dry technique was only effective on color in immediate polishing. Regarding opacity, technique was only effective in case of delayed polishing.

Simultaneous synthesis of H2, O2, and N2 via an innovatory energy system in Coronavirus pandemic time: Design, techno-economic assessment, and optimization approaches.

In this work, an innovative integrated system that is incorporated from solid oxide electrolysis cells and an oxygen separator membrane is assessed and optimized from the techno-economic aspects to respond to oxygen, hydrogen, and nitrogen demands for hospitals and other health care applications. Besides, a parametric comparison is conducted to apprehend the weights of parameters changes on the performance of criteria. Relying on the assessments, from the hydrogen production of 1 kg/s, 23.19 kg/s of oxygen, and 50.22 kg/s of nitrogen are produced. The parametric study shows that by raising the working temperature of the electrolyzer, the cell voltage variation has descending trend and the power consumption of the system is decreased by 19%. Finally, the results of multi-criteria optimization on the Pareto front reveal that in the optimal case, the system payback period is attained at about 5.32 years and the exergy efficiency of 92.47%, which are improved 16.6% and 16.2% compared to the base case, sequentially. Consequently, this system is proposed to consider as a cost-effective and reliable option towards its vital and valuable productions, in the pandemic period and after's.

Restoring Endogenous Repair Mechanisms to Heal Chronic Wounds with a Multifunctional Wound Dressing.

Current treatment of chronic wounds has been critically limited by various factors, including bacterial infection, biofilm formation, impaired angiogenesis, and prolonged inflammation. Addressing these challenges, we developed a multifunctional wound dressing-based three-pronged approach for accelerating wound healing. The multifunctional wound dressing, composed of nanofibers, functional nanoparticles, natural biopolymers, and selected protein and peptide, can target multiple endogenous repair mechanisms and represents a promising alternative to current wound healing products.

The mobility gap: estimating mobility thresholds required to control SARS-CoV-2 in Canada.

BACKGROUND: Nonpharmaceutical interventions remain the primary means of controlling severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) until vaccination coverage is sufficient to achieve herd immunity. We used anonymized smartphone mobility measures to quantify the mobility level needed to control SARS-CoV-2 (i.e., mobility threshold), and the difference relative to the observed mobility level (i.e., mobility gap). METHODS: We conducted a time-series study of the weekly incidence of SARS-CoV-2 in Canada from Mar. 15, 2020, to Mar. 6, 2021. The outcome was weekly growth rate, defined as the ratio of cases in a given week versus the previous week. We evaluated the effects of average time spent outside the home in the previous 3 weeks using a log-normal regression model, accounting for province, week and mean temperature. We calculated the SARS-CoV-2 mobility threshold and gap. RESULTS: Across the 51-week study period, a total of 888 751 people were infected with SARS-CoV-2. Each 10% increase in the mobility gap was associated with a 25% increase in the SARS-CoV-2 weekly case growth rate (ratio 1.25, 95% confidence interval 1.20-1.29). Compared to the prepandemic baseline mobility of 100%, the mobility threshold was highest in the summer (69%; interquartile range [IQR] 67%-70%), and dropped to 54% in winter 2021 (IQR 52%-55%); a mobility gap was present in Canada from July 2020 until the last week of December 2020. INTERPRETATION: Mobility strongly and consistently predicts weekly case growth, and low levels of mobility are needed to control SARS-CoV-2 through spring 2021. Mobility measures from anonymized smartphone data can be used to guide provincial and regional loosening and tightening of physical distancing measures.

Point-of-Use Rapid Detection of SARS-CoV-2: Nanotechnology-Enabled Solutions for the COVID-19 Pandemic.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused the COVID-19 pandemic that has been spreading around the world since December 2019. More than 10 million affected cases and more than half a million deaths have been reported so far, while no vaccine is yet available as a treatment. Considering the global healthcare urgency, several techniques, including whole genome sequencing and computed tomography imaging have been employed for diagnosing infected people. Considerable efforts are also directed at detecting and preventing different modes of community transmission. Among them is the rapid detection of virus presence on different surfaces with which people may come in contact. Detection based on non-contact optical techniques is very helpful in managing the spread of the virus, and to aid in the disinfection of surfaces. Nanomaterial-based methods are proven suitable for rapid detection. Given the immense need for science led innovative solutions, this manuscript critically reviews recent literature to specifically illustrate nano-engineered effective and rapid solutions. In addition, all the different techniques are critically analyzed, compared, and contrasted to identify the most promising methods. Moreover, promising research ideas for high accuracy of detection in trace concentrations, via color change and light-sensitive nanostructures, to assist fingerprint techniques (to identify the virus at the contact surface of the gas and solid phase) are also presented.

Human papilloma virus and breast cancer: the role of inflammation and viral expressed proteins.

BACKGROUND: Breast cancer is currently the most common neoplasm diagnosed in women globally. There is a growing body of evidence to suggest that human papillomavirus (HPV) infection may play a key role in invasiveness of breast cancer. The aim of this study was to determine the presence of HPV in patients with breast cancer and its possible association with cancer progression. METHODS: Breast specimens were collected from 72 patients with breast cancer and 31 healthy controls. The presence of HPV was investigated by polymerase chain reaction (PCR) and genotyping was performed for positive cases. We also evaluated the viral factors such as E6, E2, and E7 in HPV positive cases. Enzyme-linked immunosorbent assay (ELISA (and Real-time PCR techniques were used to measure the expression level of anti-carcinogenic genes, such as p53, retinoblastoma (RB), breast and ovarian cancer susceptibility gene (BRCA1, BRCA2) and inflammatory cytokines, including tumor necrosis factor α (TNF-α), transforming growth factor ß (TGF-ß), nuclear factor-kB (NF-kB), and different interleukins [ILs] (IL-1,IL6, and IL-17). RESULTS: The HPV DNA was detected in 48.6% of breast cancer samples, whereas only 16.1% of controls were positive for HPV. We observed statistically significant differences between breast cancer patients and HPV presence (P = 0.003). HPV type 18 was the most prevalent virus genotype in patients. The expression of P53, RB, BRCA1, and BRCA2 were decreased in patients with HPV-positive breast cancer as compared to HPV-negative breast cancer and healthy controls. (All P-values were less than 0.05). The presence of the HPV was associated with increased inflammatory cytokines (IL-1, IL-6, IL-17, TGF-ß, TNF-α, and NF-kB) and tumor progression. CONCLUSION: The present study demonstrated that HPV infection may implicate in the development of some types of breast cancer.

Hyperthermia versus busulfan: Finding the effective method in animal model of azoospermia induction.

Animal models of azoospermia are very applicable when evaluating new treatment methods for research purposes. The present study aimed to compare azoospermia induction in mice using busulfan or hyperthermia. To do this, about 36 adult male mice (28-30 g) were included into three experimental groups randomly (n = 12): control, busulfan (injected by a single dose of 40 mg/kg busulfan intraperitoneally) and hyperthermia (exposure to a temperature of 43°C every other day for 5 weeks). Animals were preserved for 35 and 70 days following interventions and then were sacrificed for further evaluations. After 35 days, busulfan and hyperthermia groups revealed a significant decrease in the sperm count and weight of testis compared to the control group (p < .0001). In addition, after 70 days, sperm count and weight of testis in group busulfan showed a significant increase compared to group hyperthermia (p < .01). No significant difference was observed regarding the mortality of mice between busulfan and hyperthermia groups. In group busulfan, degenerative changes in the germinal epithelium were detected in some tubules, although in group hyperthermia, degenerative changes and complete depletion of all tubules were observed. Continuous hyperthermia is a more effective method in the induction of as animal model of azoospermia compared to the busulfan.

Optical assays based on colloidal inorganic nanoparticles.

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

Detection and a possible link between parvovirus B19 and thyroid cancer.

Human parvovirus B19 (B19) is a small, non-enveloped virus and belongs to Parvoviridae family. B19 persists in many tissues such as thyroid tissue and even thyroid cancer. The main aim of this study was to determine the presence of B19, its association with increased inflammation in thyroid tissue, and thus its possible role in thyroid cancer progression. Studies have shown that virus replication in non-permissive tissue leads to overexpression of non-structural protein and results in upregulation of proinflammatory cytokines such as interleukin 6 and tumor necrosis factor alpha. A total of 36 paraffin-embedded thyroid specimens and serum were collected from patients and 12 samples were used as control. Various methods were employed, including polymerase chain reaction, real-time polymerase chain reaction, and enzyme-linked immunosorbent assay. The results have shown the presence of B19 DNA in 31 of 36 samples (86.11%). Almost in all samples, the levels of non-structural protein 1, nuclear factor kappa B, tumor necrosis factor alpha, and interleukin 6 were simultaneously high. The presence of parvovirus B19 has a significant positive correlation with nuclear factor kappa B, tumor necrosis factor alpha, and interleukin 6 levels. This study suggests that B19 infection may play an important role in tumorigenesis and thyroid cancer development via the inflammatory mechanisms.

Distal junctional kyphosis in patients with Scheuermann's disease: a retrospective radiographic analysis.

PURPOSE: To investigate the relationship between preoperative and postoperative spinopelvic alignment and occurrence of DJK/DJF. STUDY DESIGN/SETTING: This was a retrospective observational cohort study. PATIENT SAMPLE: The sample included 40 patients who underwent posterior correction of SK from January 2006 to December 2014. OUTCOME MEASURES: Correlation analysis between the preoperative and postoperative spinopelvic alignment parameters and development of DJK over the course of the study period were studied. METHODS: Whole spine X-rays obtained before surgery, 3 months after surgery and at the latest follow-up were analyzed. The following parameters were measured: maximum of thoracic kyphosis (TK), lumbar lordosis (LL), sagittal vertical axis (SVA), pelvic incidence (PI), pelvic tilt (PT), sacral slope (SS), lower instrumented vertebra (LIV) and LIV plumb line. Development of DJK was considered as the primary end point of the study. The patient population was split into a control and DJK group, with 34 patients and 6 patients, respectively. Statistic analysis was performed using unpaired t test for normal contribution and Mann-Whitney test for skew distributed values. The significance level was set to 0.05. RESULTS: DJK occurred in 15% (n = 6) over the study period. There was a significantly lower postoperative TK for the group with DJK (42.4 ± 5.3 vs 49.8 ± 6.7, p = 0.015). LIV plumb line showed higher negative values in the DJK group (-43.6 ± 25.1 vs -2.2 ± 17.8, p = 0.0435). Furthermore, postoperative LL changes were lower for the DJK group (33.84 ± 13.86% vs 31.77 ± 14.05, p < 0.0001.) The age of the patients who developed DJK was also significantly lower than that of the control group (16.8 ± 1.7 vs 19.6 ± 4.9, p = 0.0024.) CONCLUSIONS: SK patients who developed DJK appeared to have a significantly higher degree of TK correction and more negative LIV plumb line. In addition, there may be a higher risk for DJK in patients undergoing corrective surgery at a younger age.

Analysis of cervical sagittal alignment change following correction of thoracic and thoracolumbar Scheuermann's kyphosis.

PURPOSE: To analyse pre-operative and post-operative changes of cervical sagittal alignment (CSA) in Scheuermann's kyphosis (SK) patients. METHODS: 64 SK and 33 control patients were retrospectively reviewed. Whole spine X-rays obtained at pre-op, 3 months post-op and at latest follow-up were reviewed and ten separate CSA radiological parameters were measured. Patients were divided in three groups: thoracic SK (TK group, apex T6-T9, n = 40), thoracolumbar SK (TLK group, apex T10-T12, n = 24), and controls. RESULTS: Pre-operative C2-C7 lordosis was 21.1° ± 8.1°(TK), 6.1° ± 5.0°(TLK), and 11.4° ± 8.3° in control group and correlated significantly with T1 slope in both SK groups (r = 0.640, r = 0.772). Pre-operative T1 slope was dependent on deformity type, thoracic kyphosis (TK, ß = 0.445), and lumbar lordosis (LL, ß = -0.354). At final follow-up C2-C7 lordosis decreased to 15.7° ± 5.5° in TK, and increased to 12.1° ± 4.1° in TLK group. C2-C7 lordosis changes linearly correlated with T1 slope changes post-operatively (r = 0.721). Post-operative T1 slope showed linear correlation with post-operative changes in TK (ß = 0.728) and pelvic tilt (PT, ß = 0.539) in TK, and LL (ß = -0.669), thoracolumbar kyphosis (TLK, ß = -0.434), and PT (ß = 0.760) in TLK group. CONCLUSIONS: Our study suggests that SK is not a homogenous group of patients. Two patterns of pre- and post-operative CSA are demonstrated in TK and TLK groups. T1 slope is the most important parameter in determining pre-operative CSA and correlates with other regional anatomical parameters (TK and LL). Post-operative CSA adaptations also correlate with T1 slope post-operative changes. However, post-surgical T1 slope correlates with different parameters in the two SK groups (TK and PT in TK group; TLK, LL, and PT in TLK group).

Smart micro/nanoparticles in stimulus-responsive drug/gene delivery systems.

New achievements in the realm of nanoscience and innovative techniques of nanomedicine have moved micro/nanoparticles (MNPs) to the point of becoming actually useful for practical applications in the near future. Various differences between the extracellular and intracellular environments of cancerous and normal cells and the particular characteristics of tumors such as physicochemical properties, neovasculature, elasticity, surface electrical charge, and pH have motivated the design and fabrication of inventive "smart" MNPs for stimulus-responsive controlled drug release. These novel MNPs can be tailored to be responsive to pH variations, redox potential, enzymatic activation, thermal gradients, magnetic fields, light, and ultrasound (US), or can even be responsive to dual or multi-combinations of different stimuli. This unparalleled capability has increased their importance as site-specific controlled drug delivery systems (DDSs) and has encouraged their rapid development in recent years. An in-depth understanding of the underlying mechanisms of these DDS approaches is expected to further contribute to this groundbreaking field of nanomedicine. Smart nanocarriers in the form of MNPs that can be triggered by internal or external stimulus are summarized and discussed in the present review, including pH-sensitive peptides and polymers, redox-responsive micelles and nanogels, thermo- or magnetic-responsive nanoparticles (NPs), mechanical- or electrical-responsive MNPs, light or ultrasound-sensitive particles, and multi-responsive MNPs including dual stimuli-sensitive nanosheets of graphene. This review highlights the recent advances of smart MNPs categorized according to their activation stimulus (physical, chemical, or biological) and looks forward to future pharmaceutical applications.

The Effect of Composite Thickness on the Stress Distribution Pattern of Restored Premolar Teeth with Cusp Reduction.

PURPOSE: Different thicknesses of restorative material can alter the stress distribution pattern in remaining tooth structure. The assumption is that a thicker composite restoration will induce a higher fracture resistance. Therefore, the present study evaluated the effect of composite thickness on stress distribution in a restored premolar with cusp reduction. MATERIALS AND METHODS: A 3D solid model of a maxillary second premolar was prepared and meshed. MOD cavities were designed with different cusp reduction thicknesses (0, 0.5, 1, 1.5, 2.5 mm). Cavities were restored with Valux Plus composite. They were loaded with 200 N force on the occlusal surface in the direction of the long axis. Von Mises stresses were evaluated with Abaqus software. RESULTS: Stress increased from occlusal to gingival and was maximum in the cervical region. The stressed area in the palatal cusp was more than that of the buccal cusp. Increasing the thickness of composite altered the shear stress to compressive stress in the occlusal area of the teeth. CONCLUSION: The model with 2.5 mm cusp reduction exhibited the most even stress distribution.

Microparticles manipulation and enhancement of their separation in pinched flow fractionation by insulator-based dielectrophoresis.

The separation and manipulation of microparticles in lab on a chip devices have importance in point of care diagnostic tools and analytical applications. The separation and sorting of particles from biological and clinical samples can be performed using active and passive techniques. In passive techniques, no external force is applied while in active techniques by applying external force (e.g. electrical), higher separation efficiency is obtained. In this article, passive (pinched flow fractionation) and active (insulator-based dielectrophoresis) methods were combined to increase the separation efficiency at lower voltages. First by simulation, appropriate values of geometry and applied voltages for better focusing, separation, and lower Joule heating were obtained. Separation of 1.5 and 6 µm polystyrene microparticles was experimentally obtained at optimized geometry and low total applied voltage (25 V). Also, the trajectory of 1.5 µm microparticles was controlled by adjusting the total applied voltage.

Characterization of virulence factors, antimicrobial resistance pattern and clonal complexes of group B streptococci isolated from neonates.

Between January and December 2013, swab samples were taken for the throat and external ear canals of 1037 newborns for screening of Group B Streptococcus (GBS or S. agalactiae). Isolates were analyzed form Multilocus sequence typing (MLST), capsular type, virulence genes and antibiotic susceptibility. The MLST analysis of 19 GBS isolates showed 8 sequence types (STs). Overall the most common STs were ST19 and ST28. Other STs were ST1, ST4, ST8, ST12, ST335 and ST734 (a new ST). The most common clonal complexes (CCs) were CC19 (68.4%) and CC10 (21%). The scpB, hlyB and bca virulence genes were detected in all STS, while the bac gene was predominant in ST12 with capsular type (CT) Ib. The IS1548 and the rib genes were particularly prevalent in CTIII and were detected in isolates belong to ST19, ST335 and ST734 and were grouped in CC19. All isolates were susceptible to penicillin, vancomycin, linezolid and quinupristin-dalfopristin. Resistance to tetracycline was observed in all 19 (100%) strains and was correlated with presence of the tetM gene except for one isolate with ST12. All the ST8 and ST12 isolates were resistant to macrolide carrying two resistance genes; the ermTR and the ermB, respectively. The results of this study showed that the CC19 was a major clone in the neonatal intensive care unit (NICU) of Imam Khomeini hospital which can cause severe infections in susceptible neonates (particularly in premature infants). As a result, an intensive infection control policy is needed to prevent the spread of this clone.

Écart de mobilité : estimation des seuils de mobilité requis pour maîtriser le SRAS-CoV-2 au Canada.

CONTEXTE: Les interventions non pharmacologiques demeurent le principal moyen de maîtriser le coronavirus du syndrome respiratoire aigu sévère 2 (SRAS-CoV-2) d'ici à ce que la couverture vaccinale soit suffisante pour donner lieu à une immunité collective. Nous avons utilisé des données de mobilité anonymisées de téléphones intelligents afin de quantifier le niveau de mobilité requis pour maîtriser le SRAS-CoV-2 (c.-à-d., seuil de mobilité), et la différence par rapport au niveau de mobilité observé (c.-à-d., écart de mobilité). MÉTHODES: Nous avons procédé à une analyse de séries chronologiques sur l'incidence hebdomadaire du SRAS-CoV-2 au Canada entre le 15 mars 2020 et le 6 mars 2021. Le paramètre mesuré était le taux de croissance hebdomadaire, défini comme le rapport entre les cas d'une semaine donnée et ceux de la semaine précédente. Nous avons mesuré les effets du temps moyen passé hors domicile au cours des 3 semaines précédentes à l'aide d'un modèle de régression log-normal, en tenant compte de la province, de la semaine et de la température moyenne. Nous avons calculé le seuil de mobilité et l'écart de mobilité pour le SRAS-CoV-2. RÉSULTATS: Au cours des 51 semaines de l'étude, en tout, 888 751 personnes ont contracté le SRAS-CoV-2. Chaque augmentation de 10 % de l'écart de mobilité a été associée à une augmentation de 25 % du taux de croissance des cas hebdomadaires de SRAS-CoV-2 (rapport 1,25, intervalle de confiance à 95 % 1,20­1,29). Comparativement à la mobilité prépandémique de référence de 100 %, le seuil de mobilité a été plus élevé au cours de l'été (69 %, écart interquartile [EI] 67 %­70 %), et a chuté à 54 % pendant l'hiver 2021 (EI 52 %­55 %); un écart de mobilité a été observé au Canada entre juillet 2020 et la dernière semaine de décembre 2020. INTERPRÉTATION: La mobilité permet de prédire avec fiabilité et constance la croissance des cas hebdomadaires et il faut maintenir des niveaux faibles de mobilité pour maîtriser le SRAS-CoV-2 jusqu'à la fin du printemps 2021. Les données de mobilité anonymisées des téléphones intelligents peuvent servir à guider le relâchement ou le resserrement des mesures de distanciation physique provinciales et régionales.

Effect of Er,Cr:YSGG laser treatment on microshear bond strength of zirconia to resin cement before and after sintering.

PURPOSE: To evaluate the effect of Er,Cr:YSGG laser treatment on microshear bond strength of zirconia to resin cement before and after sintering. MATERIALS AND METHODS: Ninety pre-sintered yttrium-stabilized tetragonal zirconia specimens (4 × 3 × 2 mm) were divided into 6 groups (n = 15). In group C, sintered zirconia was not treated (control group). In groups AS2 and AS3, sintered zirconia blocks were irradiated by Er,Cr:YSGG using a power of 2 and 3 W, respectively. Groups PS2 and PS3 consisted of pre-sintered blocks conditioned by Er,Cr:YSGG at 2 and 3 W, respectively. In group AA, sintered zirconia was air abraded with 50-µm alumina powder. One block was made using the same preparations as mentioned above and was morphologically assessed by SEM. Microcylinders of Panavia F 2.0 were placed on the treated surface of the groups. Samples were incubated at 37°C and 98% humidity for 48 h and then subjected to microshear bond strength testing. The mode of failure was evaluated. Data were analyzed by one-way ANOVA and Tukey's HSD test (p < 0.05). RESULTS: There was a statistically significant difference between group AA and the others (p < 0.0001). A significant difference was also noted between groups AS3 and C (p = 0.031). Complete surface roughness was seen in group AA and the bond failure was mostly cohesive, while in laser-treated groups, the surfaces roughness was much lower vs other groups, and the mode of failure was mostly adhesive. CONCLUSION: Laser treatment of pre-sintered Y-TZP cannot be recommended for improving the bond. Although sandblasting of sintered Y-TZP yielded better results than the rest of the groups, 3 W power after sintering can also be effective in enhancing the bonding strength of resin cement to zirconia.

Adhesion of glass ionomer cements to primary dentin using a universal adhesive.

BACKGROUND: Glass ionomers are widely used for restoring carious primary teeth. However, their ability to bond to primary dentin is considered a challenge in pediatric dentistry. OBJECTIVES: The study aimed to evaluate the microshear bond strength (µSBS) of a resin-modified glass ionomer (RMGI) and a high-viscosity glass ionomer cement (Hv-GIC) to primary dentin using a universal adhesive. MATERIAL AND METHODS: Thirty human primary maxillary canines were cut in half and prepared for the µSBS test. The specimens (N = 60) were assigned to 6 groups. Three groups were defined for RMGI (FUJI II LC) and 3 groups for Hv-GIC (EQUIA Forte): with an immediately curing adhesive (G-Premio); with a delayed curing adhesive; and without an adhesive (control group). After preparing the dentin surfaces, the glass ionomers were bonded using Tygon® tubes with an internal diameter of 0.7 mm. The µSBS test was performed, and the data was analyzed using two-way analysis of variance (ANOVA) followed by Tukey's post hoc test. Additionally, the failure modes were determined using a stereomicroscope. Six specimens, one for each study group, were prepared for scanning electron microscopy (SEM) analysis to observe the glass ionomer-dentin interface. RESULTS: The type of glass ionomer did not have a significant effect on the µSBS (p = 0.305). Groups that received universal adhesive application prior to glass ionomer exhibited a significantly higher µSBS (p < 0.0001). However, there was no significant difference between the immediately curing and delayed curing groups (p = 0.157). The predominant failure mode was mixed failure. CONCLUSIONS: Higher bond strength of glass ionomers to primary teeth can be achieved by using universal adhesives, which, in addition to the proven benefits of glass ionomers, can improve their clinical success.

Cost and environmental analysis and optimization of a new and green three-level waste heat recovery-based cogeneration cycle: A comparative study.

Effective and maximum utilization of waste heat from industrial processes and fossil plants can improve thermodynamic performance and declined the environmental impacts of waste heat discharge to the atmosphere. Here, the multi-aspect assessment and optimization of a novel cogeneration power and cooling load cycle (CPCC) is developed. The considered cogeneration process is designed under a three-level waste heat recovery process consisting of an ORC (organic Rankine cycle) unit and an ejection-based refrigeration process. Thermodynamic performance, cost feasibility and environmental assessments of the suggested process have been comprehensively evaluated and discussed. A two-objective optimization is developed to minimize the total cost and maximize the exergy efficiency. Moreover, the comprehensive CPCC behavior is compared with a reference system (a single-level recovery/ORC process and a compression-based refrigeration process). The performance of the considered CPCC is also examined under various environmentally compatible refrigerants. The environmental analysis is based on two indicators (i.e., life cycle-climate performance and total equivalent-warming impacts). Due to the multi-level recovery of waste heat, the environmental impacts of emitting waste heat into the environment are significantly reduced. The outcomes revealed that the R1234/yf is considered as the most suitable refrigerant that can causes to optimum achievements for both systems. The exergetic performance is improved by about 10.3% compared to that reference system, while the exergy destruction and total annual cost of the CPCC, respectively, are reduced by approximately 7.4% and 21.6% compared to the reference cycle. It was also found that about 11,640 tons of carbon dioxide can be reduced by using the ejector in the refrigeration process.

Effect of storage time on chemical structure of a single-bottle and a two-bottle experimental ceramic primer and micro-shear bond strength of composite to ceramic.

PURPOSE: This study assessed the effect of storage time on chemical structure of a single-bottle and a two-bottle experimental ceramic primer and micro-shear bond strength (µSBS) of composite to ceramic. MATERIALS AND METHODS: This study was conducted on 60 sintered zirconia and 60 feldspathic porcelain blocks. Half of the specimens (n = 30) were subjected to surface treatment with the single-bottle Clearfil ceramic primer (n = 15) and two-bottle experimental primer (n = 15) after 24 hours. The remaining half received the same surface treatments after 6 months storage in distilled water. Composite cylinders were bonded to the ceramics, and they were then subjected to µSBS test. Also, the primers underwent Fourier-transform infrared spectroscopy (FTIR) after 24 hours and 6 months to assess their chemical structure. Data were analyzed with 3-way ANOVA and adjusted Bonferroni test (alpha = 0.05). RESULTS: The µSBS of both ceramics significantly decreased at 6 months in one-bottle ceramic primer group (P = .001), but it was not significantly different from the two-bottle experimental primer group (P = .635). FTIR showed hydrolysis of single-bottle primer, cleavage of silane and 10-MDP bonds, and formation of siloxane bonds after 6 months. CONCLUSION: Six months of storage caused significant degradation of single-bottle ceramic primer, and consequently had an adverse effect on µSBS.