Mechanism of dimerization and structural features of human LI-cadherin.

Liver intestine (LI)-cadherin is a member of the cadherin superfamily, which encompasses a group of Ca2+-dependent cell-adhesion proteins. The expression of LI-cadherin is observed on various types of cells in the human body, such as normal small intestine and colon cells, and gastric cancer cells. Because its expression is not observed on normal gastric cells, LI-cadherin is a promising target for gastric cancer imaging. However, because the cell adhesion mechanism of LI-cadherin has remained unknown, rational design of therapeutic molecules targeting this cadherin has been hampered. Here, we have studied the homodimerization mechanism of LI-cadherin. We report the crystal structure of the LI-cadherin homodimer containing its first four extracellular cadherin repeats (EC1-4). The EC1-4 homodimer exhibited a unique architecture different from that of other cadherins reported so far, driven by the interactions between EC2 of one protein chain and EC4 of the second protein chain. The crystal structure also revealed that LI-cadherin possesses a noncanonical calcium ion-free linker between the EC2 and EC3 domains. Various biochemical techniques and molecular dynamics simulations were employed to elucidate the mechanism of homodimerization. We also showed that the formation of the homodimer observed in the crystal structure is necessary for LI-cadherin-dependent cell adhesion by performing cell aggregation assays. Taken together, our data provide structural insights necessary to advance the use of LI-cadherin as a target for imaging gastric cancer.

Development of a new gene expression vector for Thermus thermophilus using a silica-inducible promoter.

BACKGROUND: Thermostable enzymes are commonly produced in mesophilic hosts for research and bioengineering purposes. However, these hosts do not overexpress the active forms of some biologically functional thermoenzymes. Therefore, an efficient thermophilic expression system is needed. Thermus thermophilus contains an easily manipulable genome and is therefore among the best candidate microbes for a "hot" expression system. We previously identified a strong and inducible promoter that was active in T. thermophilus under supersaturated silica conditions. Here, we report a new heterologous gene expression system based on a silica-inducible promoter in T. thermophilus. RESULTS: A Thermus sp. A4 gene encoding thermostable ß-galactosidase was cloned as a reporter gene into the expression vector pSix1, which contains a selection marker that confers thermostable resistance to hygromycin and a 600 bp DNA region containing a putative silica-inducible promoter. ß-galactosidase activity was 11-fold higher in the presence than in the absence of 10 mM silicic acid. SDS-PAGE revealed a prominent band corresponding to 73 kDa of ß-galactosidase, and this enzyme was expressed as an active and soluble protein (yield: 27 mg/L) in Thermus but as an inclusion body in Escherichia coli. Truncation of the putative silica-inducible promoter region in Thermus expression vector improved the yield of the target protein, possibly by avoiding plasmid instability due to homologous recombination. Finally, we developed an expression vector containing the pSix1 backbone and a 100 bp DNA region corresponding to the silica-inducible promoter. We used this vector to successfully express the active form of glutamate dehydrogenase from Pyrobaculum islandicum (PisGDH) without additional treatment (yield: 9.5 mg/L), whereas the expression of active PisGDH in E. coli required heat treatment. CONCLUSION: We successfully expressed the thermostable ß-galactosidase and PisGDH in T. thermophilus as active and soluble forms and achieved with our system the highest known protein expression levels in this species. These thermoenzymes were expressed in active and soluble forms. Our results validate the use of our silica-inducible expression system as a novel strategy for the intracellular overexpression of thermostable proteins.

Domain-Swapping Design by Polyproline Rod Insertion.

During domain swapping, proteins mutually interconvert structural elements to form a di-/oligomer. Engineering this process by design is important for creating a higher order protein assembly with minimal modification. Herein, a simple design strategy is shown for domain-swapping formation by loop deletion and insertion of a polyproline rod. Crystal structures revealed the formation of the domain-swapped dimers and polyproline portion formed a polyproline II (PPII) structure. Small-angle X-ray scattering demonstrated that an extended orientation of domain-swapped dimer was retained in solution. It is found that a multiple of three of inserting proline residue is favored for domain swapping because of the helical nature of PPII. The rigid nature of the polyproline rod enables precise control of the interdomain distance and orientation.

A novel carbohydrate-binding surface layer protein from the hyperthermophilic archaeon Pyrococcus horikoshii.

In Archaea and Bacteria, surface layer (S-layer) proteins form the cell envelope and are involved in cell protection. In the present study, a putative S-layer protein was purified from the crude extract of Pyrococcus horikoshii using affinity chromatography. The S-layer gene was cloned and expressed in Escherichia coli. Isothermal titration calorimetry analyses showed that the S-layer protein bound N-acetylglucosamine and induced agglutination of the gram-positive bacterium Micrococcus lysodeikticus. The protein comprised a 21-mer structure, with a molecular mass of 1,340 kDa, as determined using small-angle X-ray scattering. This protein showed high thermal stability, with a midpoint of thermal denaturation of 79 °C in dynamic light scattering experiments. This is the first description of the carbohydrate-binding archaeal S-layer protein and its characteristics.

Mannose-recognition mutant of the galactose/N-acetylgalactosamine-specific C-type lectin CEL-I engineered by site-directed mutagenesis.

BACKGROUND: CEL-I is a galactose/N-acetylgalactosamine-specific C-type lectin isolated from the sea cucumber Cucumaria echinata. Its carbohydrate-binding site contains a QPD (Gln-Pro-Asp) motif, which is generally recognized as the galactose specificity-determining motif in the C-type lectins. In our previous study, replacement of the QPD motif by an EPN (Glu-Pro-Asn) motif led to a weak binding affinity for mannose. Therefore, we examined the effects of an additional mutation in the carbohydrate-binding site on the specificity of the lectin. METHODS: Trp105 of EPN-CEL-I was replaced by a histidine residue using site-directed mutagenesis, and the binding affinity of the resulting mutant, EPNH-CEL-I, was examined by sugar-polyamidoamine dendrimer assay, isothermal titration calorimetry, and glycoconjugate microarray analysis. Tertiary structure of the EPNH-CEL-I/mannose complex was determined by X-ray crystallographic analysis. RESULTS: Sugar-polyamidoamine dendrimer assay and glycoconjugate microarray analysis revealed a drastic change in the specificity of EPNH-CEL-I from galactose/N-acetylgalactosamine to mannose. The association constant of EPNH-CEL-I for mannose was determined to be 3.17×10(3) M(-1) at 25°C. Mannose specificity of EPNH-CEL-I was achieved by stabilization of the binding of mannose in a correct orientation, in which the EPN motif can form proper hydrogen bonds with 3- and 4-hydroxy groups of the bound mannose. CONCLUSIONS: Specificity of CEL-I can be engineered by mutating a limited number of amino acid residues in addition to the QPD/EPN motifs. GENERAL SIGNIFICANCE: Versatility of the C-type carbohydrate-recognition domain structure in the recognition of various carbohydrate chains could become a promising platform to develop novel molecular recognition proteins.

Effects of amino acid mutations in the pore-forming domain of the hemolytic lectin CEL-III.

The hemolytic lectin CEL-III forms transmembrane pores in the membranes of target cells. A study on the effect of site-directed mutation at Lys405 in domain 3 of CEL-III indicated that replacements of this residue by relatively smaller residues lead to a marked increase in hemolytic activity, suggesting that moderately destabilizing domain 3 facilitates formation of transmembrane pores through conformational changes.

In Vivo Formation of the Protein Disulfide Bond That Enhances the Thermostability of Diphosphomevalonate Decarboxylase, an Intracellular Enzyme from the Hyperthermophilic Archaeon Sulfolobus solfataricus.

UNLABELLED: In the present study, the crystal structure of recombinant diphosphomevalonate decarboxylase from the hyperthermophilic archaeon Sulfolobus solfataricus was solved as the first example of an archaeal and thermophile-derived diphosphomevalonate decarboxylase. The enzyme forms a homodimer, as expected for most eukaryotic and bacterial orthologs. Interestingly, the subunits of the homodimer are connected via an intersubunit disulfide bond, which presumably formed during the purification process of the recombinant enzyme expressed in Escherichia coli. When mutagenesis replaced the disulfide-forming cysteine residue with serine, however, the thermostability of the enzyme was significantly lowered. In the presence of ß-mercaptoethanol at a concentration where the disulfide bond was completely reduced, the wild-type enzyme was less stable to heat. Moreover, Western blot analysis combined with nonreducing SDS-PAGE of the whole cells of S. solfataricus proved that the disulfide bond was predominantly formed in the cells. These results suggest that the disulfide bond is required for the cytosolic enzyme to acquire further thermostability and to exert activity at the growth temperature of S. solfataricus. IMPORTANCE: This study is the first report to describe the crystal structures of archaeal diphosphomevalonate decarboxylase, an enzyme involved in the classical mevalonate pathway. A stability-conferring intersubunit disulfide bond is a remarkable feature that is not found in eukaryotic and bacterial orthologs. The evidence that the disulfide bond also is formed in S. solfataricus cells suggests its physiological importance.

Hemolytic lectin CEL-III heptamerizes via a large structural transition from α-helices to a ß-barrel during the transmembrane pore formation process.

CEL-III is a hemolytic lectin isolated from the sea cucumber Cucumaria echinata. This lectin is composed of two carbohydrate-binding domains (domains 1 and 2) and one oligomerization domain (domain 3). After binding to the cell surface carbohydrate chains through domains 1 and 2, domain 3 self-associates to form transmembrane pores, leading to cell lysis or death, which resembles other pore-forming toxins of diverse organisms. To elucidate the pore formation mechanism of CEL-III, the crystal structure of the CEL-III oligomer was determined. The CEL-III oligomer has a heptameric structure with a long ß-barrel as a transmembrane pore. This ß-barrel is composed of 14 ß-strands resulting from a large structural transition of α-helices accommodated in the interface between domains 1 and 2 and domain 3 in the monomeric structure, suggesting that the dissociation of these α-helices triggered their structural transition into a ß-barrel. After heptamerization, domains 1 and 2 form a flat ring, in which all carbohydrate-binding sites remain bound to cell surface carbohydrate chains, stabilizing the transmembrane ß-barrel in a position perpendicular to the plane of the lipid bilayer.

Identification and characterization of the X-dimer of human P-cadherin: implications for homophilic cell adhesion.

Cell adhesion mediated by cadherins depends critically on the homophilic trans-dimerization of cadherin monomers from apposing cells, generating the so-called strand-swap dimer (ss-dimer). Recent evidence indicates that the ss-dimer is preceded by an intermediate species known as the X-dimer. Until now, the stabilized form of the X-dimer had only been observed in E-cadherin among the classical type I cadherins. Herein, we report the isolation and characterization of the analogous X-dimer of human P-cadherin. Small-angle X-ray scattering (SAXS) and site-directed mutagenesis data indicates that the overall architecture of the X-dimer of human P-cadherin is similar to that of E-cadherin. The X-dimerization is triggered by Ca(2+) and governed by specific protein-protein interactions. The attachment of three molecules of Ca(2+) with high affinity (Kd = 9 µM) stabilizes the monomeric conformation of P-cadherin (ΔTm = 17 °C). The Ca(2+)-stabilized monomer subsequently dimerizes in the X-configuration by establishing protein-protein interactions that require the first two extracellular domains of the cadherin. The homophilic X-dimerization is very specific, as the presence of the highly homologous E-cadherin does not interfere with the self-recognition of P-cadherin. These data suggest that the X-dimer could play a key role in the specific cell-cell adhesion mediated by human P-cadherin.

Identification of the amino acid residues involved in the hemolytic activity of the Cucumaria echinata lectin CEL-III.

BACKGROUND: CEL-III is a hemolytic lectin isolated from the sea cucumber Cucumaria echinata that shows Ca(2+)-dependent Gal/GalNAc-binding specificity. This lectin is composed of two carbohydrate-recognition domains (domains 1 and 2) and an oligomerization domain (domain 3) that facilitates CEL-III assembly in the target cell membrane to form ion-permeable pores. METHODS: Several amino acid residues in domain 3 were replaced by alanine, and hemolytic activity of the mutants was examined. RESULTS: K344A, K351A, K405A, K420A and K425A showed marked increases in activity. In particular, K405A had activity that was 360-fold higher than the wild-type recombinant CEL-III and 3.6-fold higher than the native protein purified from sea cucumber. Since these residues appear to play roles in the stabilization of domain 3 through ionic and hydrogen bonding interactions with other residues, the mutations of these residues presumably lead to destabilization of domain 3, which consequently induces the oligomerization of the protein through association of domain 3 in the membrane. In contrast, K338A, R378A and R408A mutants exhibited a marked decrease in hemolytic activity. Since these residues are located on the surface of domain 3 without significant interactions with other residue, they may be involved in the interaction with components of the target cell membrane. CONCLUSIONS: Several amino acid residues, especially basic residues, are found to be involved in the hemolytic activity as well as the oligomerization ability of CEL-III. GENERAL SIGNIFICANCE: The results provide important clues to the membrane pore-forming mechanism of CEL-III, which is also related to that of bacterial pore-forming toxins.

Manno-oligosaccharide-binding ability of mouse RegIV/GST-fusion protein evaluated by complex formation with the carbohydrate-containing polyamidoamine dendrimer.

The carbohydrate-binding properties of the C-type lectin-like mouse RegIV and glutathione S-transferase-fusion protein (GST-mRegIV) were examined using carbohydrate-containing polyamidoamine dendrimers (PD). GST-mRegIV showed affinity for mannan- and manno-oligosaccharide containing PD. Binding was inhibited by manno-oligosaccharides but not by mannose or other tested carbohydrates, suggesting that the binding site may have an extended structure in contrast with typical C-type lectins.

Crystallization and preliminary crystallographic study of oligomers of the haemolytic lectin CEL-III from the sea cucumber Cucumaria echinata.

CEL-III is a Ca(2+)-dependent haemolytic lectin isolated from the marine invertebrate Cucumaria echinata. This lectin binds to Gal/GalNAc-containing carbohydrate chains on the cell surface and, after conformational changes, oligomerizes to form ion-permeable pores in cell membranes. CEL-III also forms soluble oligomers similar to those formed in cell membranes upon binding of specific carbohydrates in high-pH and high-salt solutions. These soluble and membrane CEL-III oligomers were crystallized and X-ray diffraction data were collected. Crystals of soluble oligomers and membrane oligomers diffracted X-rays to 3.3 and 4.2 Å resolution, respectively, using synchrotron radiation and the former was found to belong to space group C2. Self-rotation functional analysis of the soluble oligomer crystal suggested that it might be composed of heptameric CEL-III.

Effects of detergents on the oligomeric structures of hemolytic lectin CEL-III as determined by small-angle X-ray scattering.

Hemolytic lectin CEL-III isolated from the sea cucumber Cucumaria echinata forms transmembrane pores by self-oligomerization in target cell membranes. It also formed soluble oligomers in aqueous solution upon binding with specific carbohydrates under conditions of high pH and a high salt concentration. The size of the soluble CEL-III oligomers decreased when treated with detergents such as Triton X-100 and SDS. Small-angle X-ray scattering measurements suggested that the dissociated unit of the oligomer was a tightly associated CEL-III heptamer. Without detergents in solution, these heptamers further assembled into larger 21mer oligomers, comprising three heptamers held together by relatively weak hydrophobic interactions.

Substrate-induced change in the quaternary structure of type 2 isopentenyl diphosphate isomerase from Sulfolobus shibatae.

Type 2 isopentenyl diphosphate isomerase catalyzes the interconversion between two active units for isoprenoid biosynthesis, i.e., isopentenyl diphosphate and dimethylallyl diphosphate, in almost all archaea and in some bacteria, including human pathogens. The enzyme is a good target for discovery of antibiotics because it is essential for the organisms that use only the mevalonate pathway to produce the active isoprene units and because humans possess a nonhomologous isozyme, type 1 isopentenyl diphosphate isomerase. However, type 2 enzymes were reportedly inhibited by mechanism-based drugs for the type 1 enzyme due to their surprisingly similar reaction mechanisms. Thus, a different approach is now required to develop new inhibitors specific to the type 2 enzyme. X-ray crystallography and gel filtration chromatography revealed that the enzyme from a thermoacidophilic archaeon, Sulfolobus shibatae, is in the octameric state at a high concentration. Interestingly, a part of the regions that are involved in the substrate binding in the previously reported tetrameric structures is integral to the formation of the tetramer-tetramer interface in the substrate-free octameric structure. Site-directed mutagenesis at such regions resulted in stabilization of the tetramer. Small-angle X-ray scattering, tryptophan fluorescence, and dynamic light scattering analyses showed that substrate binding causes the dissociation of an octamer into tetramers. This property, i.e., incompatibility between octamer formation and substrate binding, might provide clues to develop new specific inhibitors of the archaeal enzyme.

Galactose recognition by a tetrameric C-type lectin, CEL-IV, containing the EPN carbohydrate recognition motif.

CEL-IV is a C-type lectin isolated from a sea cucumber, Cucumaria echinata. This lectin is composed of four identical C-type carbohydrate-recognition domains (CRDs). X-ray crystallographic analysis of CEL-IV revealed that its tetrameric structure was stabilized by multiple interchain disulfide bonds among the subunits. Although CEL-IV has the EPN motif in its carbohydrate-binding sites, which is known to be characteristic of mannose binding C-type CRDs, it showed preferential binding of galactose and N-acetylgalactosamine. Structural analyses of CEL-IV-melibiose and CEL-IV-raffinose complexes revealed that their galactose residues were recognized in an inverted orientation compared with mannose binding C-type CRDs containing the EPN motif, by the aid of a stacking interaction with the side chain of Trp-79. Changes in the environment of Trp-79 induced by binding to galactose were detected by changes in the intrinsic fluorescence and UV absorption spectra of WT CEL-IV and its site-directed mutants. The binding specificity of CEL-IV toward complex oligosaccharides was analyzed by frontal affinity chromatography using various pyridylamino sugars, and the results indicate preferential binding to oligosaccharides containing Galß1-3/4(Fucα1-3/4)GlcNAc structures. These findings suggest that the specificity for oligosaccharides may be largely affected by interactions with amino acid residues in the binding site other than those determining the monosaccharide specificity.

An assay for carbohydrate-binding activity of lectins using polyamidoamine dendrimer conjugated with carbohydrates.

The carbohydrate-binding activity of lectins was examined using polyamidoamine dendrimer conjugated with carbohydrates (sugar-PD). When a C-type lectin, CEL-IV, was mixed with melibiose-PD, large complexes with a diameter of about 1 µm were formed. Changes in the amount of CEL-IV/melibiose-PD complex as an indication of lectin activity were measured sensitively by Rayleigh scattering. The carbohydrate specificity of the lectin was determined on the basis of inhibition of complex-formation by individual carbohydrates. It is suggested that various lectins can also be measured using sugar-PDs to which different carbohydrates are attached.

Structural modeling of RNase P RNA of the hyperthermophilic archaeon Pyrococcus horikoshii OT3.

Ribonuclease P (RNase P) is a ubiquitous trans-acting ribozyme that processes the 5' leader sequence of precursor tRNA (pre-tRNA). The RNase P RNA (PhopRNA) of the hyperthermophilic archaeon Pyrococcus horikoshii OT3 is central to the catalytic process and binds five proteins (PhoPop5, PhoRpp21, PhoRpp29, PhoRpp30, and PhoRpp38) which contribute to the enzymatic activity of the holoenzyme. Despite significant progress in determining the crystal structure of the proteins, the structure of PhopRNA remains elusive. Comparative analysis of the RNase P RNA sequences and existing crystallographic structural information of the bacterial RNase P RNAs were combined to generate a phylogenetically supported three-dimensional (3-D) model of the PhopRNA. The model structure shows an essentially flat disk with 16 tightly packed helices and a conserved face suitable for the binding of pre-tRNA. Moreover, the structure in solution was investigated by enzymatic probing and small-angle X-ray scattering (SAXS) analysis. The low resolution model derived from SAXS and the comparative 3-D model have similar overall shapes. The 3-D model provides a framework for a better understanding of structure-function relationships of this multifaceted primordial ribozyme.

Refolding, characterization and crystal structure of (S)-malate dehydrogenase from the hyperthermophilic archaeon Aeropyrum pernix.

Tartrate oxidation activity was found in the crude extract of an aerobic hyperthermophilic archaeon Aeropyrum pernix, and the enzyme was identified as (S)-malate dehydrogenase (MDH), which, when produced in Escherichia coli, was mainly obtained as an inactive inclusion body. The inclusion body was dissolved in 6 M guanidine-HCl and gradually refolded to the active enzyme through dilution of the denaturant. The purified recombinant enzyme consisted of four identical subunits with a molecular mass of about 110 kDa. NADP was preferred as a coenzyme over NAD for (S)-malate oxidation and, unlike MDHs from other sources, this enzyme readily catalyzed the oxidation of (2S,3S)-tartrate and (2S,3R)-tartrate. The tartrate oxidation activity was also observed in MDHs from the hyperthermophilic archaea Methanocaldococcus jannaschii and Archaeoglobus fulgidus, suggesting these hyperthermophilic MDHs loosely bind their substrates. The refolded A. pernix MDH was also crystallized, and the structure was determined at a resolution of 2.9 A. Its overall structure was similar to those of the M. jannaschii, Chloroflexus aurantiacus, Chlorobium vibrioforme and Cryptosporidium parvum [lactate dehydrogenase-like] MDHs with root-mean-square-deviation values between 1.4 and 2.1 A. Consistent with earlier reports, Ala at position 53 was responsible for coenzyme specificity, and the next residue, Arg, was important for NADP binding. Structural comparison revealed that the hyperthermostability of the A. pernix MDH is likely attributable to its smaller cavity volume and larger numbers of ion pairs and ion-pair networks, but the molecular strategy for thermostability may be specific for each enzyme.

A helical string of alternately connected three-helix bundles for the cell wall-associated adhesion protein Ebh from Staphylococcus aureus.

The 1.1 MDa cell-wall-associated adhesion protein of staphylococci, Ebh, consists of several distinct regions, including a large central region with 52 imperfect repeats of 126 amino acid residues. We investigated the structure of this giant molecule by X-ray crystallography, circular dichroism (CD) spectrometry, and small-angle X-ray scattering (SAXS). The crystal structure of two repeats showed that each repeat consists of two distinct three-helix bundles, and two such repeats are connected along the long axis, resulting in a rod-like structure that is 120 A in length. CD and SAXS analyses of the samples with longer repeats suggested that each repeat has an identical structure, and that such repeats are connected tandemly to form a rod-like structure in solution, the length of which increased proportionately with the number of repeating units. On the basis of these results, it was proposed that Ebh is a 320 nm rod-like molecule with some plasticity at module junctions.

Novel carbohydrate-recognition mode of the invertebrate C-type lectin SPL-1 from Saxidomus purpuratus revealed by the GlcNAc-complex crystal in the presence of Ca2.

The C-type lectins SPL-1 and SPL-2 from the bivalve Saxidomus purpuratus are composed of A and B chains and of two B chains, respectively. They bind specific carbohydrates containing acetamido groups, such as N-acetylglucosamine (GlcNAc) and N-acetylgalactosamine (GalNAc), in a Ca2+-independent manner. Unlike ordinary C-type lectins, which require Ca2+ ions for carbohydrate recognition, these lectins recognize specific carbohydrates mainly through interactions with the acetamido group without Ca2+ ions, even though Ca2+ enhances the binding affinity of these lectins, especially SPL-1. In the present study, the crystal structure of the SPL-1-GlcNAc complex in the presence of Ca2+ revealed that the binding of SPL-1 to GlcNAc is stabilized by hydrogen bonds to the water molecule(s) coordinating Ca2+, whereas in ordinary C-type lectins Ca2+ directly forms coordinate bonds to the hydroxy groups of carbohydrates. These differences may also allow SPL-1 and SPL-2 to recognize both GlcNAc and GalNAc, which have different orientations of the 4-hydroxy group.