Solid-phase synthesis of imprinted nanoparticles as artificial antibodies against the C-terminus of the cannabinoid CB1 receptor: exploring a viable alternative for bioanalysis.

The production of artificial anti-CB1 antibodies in nanoparticle format is described using the solid-phase imprinting approach. Instead of whole protein imprinting, a linear C-terminus sequence of the receptor comprising 15 amino acids (458-KVTMSVSTDTSAEAL-472) has been used as template, in accordance with the epitope imprinting approach. This sequence is located intracellularly, and it is involved in coupling to Gi/o proteins, being responsible for CB1 receptor desensitisation and internalisation. Developed molecularly imprinted materials were found to be in the nanometre scale, with a particle size of 126.4 ± 10.5 nm at pH 3 (25 ºC) and spherical shape. It was also observed that the size was sensible to temperature changes being reduced to 106.3 ± 15.2 nm at 35 °C. Lower critical solution temperature of this polymer was found to be ≈ 33.4 °C. The affinity and selectivity of the artificial antibody were assessed through dot blot and Western blot experiments. For the latter, recombinant fusion proteins GST-CB1414-472 and GST-CB1414-442 were produced to work respectively as target and negative control proteins. The control protein did not carry the target epitope for being devoid of last 30 amino acids at the C-terminus. The results demonstrated that the anti-CB1 material recognised selectively the target protein, thanks to the presence of the 15-amino acid sequence selected as epitope, which revealed that binding occurred at the C-terminus of the receptor itself. The methodology presented may pave the way for the development of novel imprinted nanomaterials for other proteins included in the superfamily of the G-protein-coupled receptors (GPCR).

Characterization of ancient lipids in prehistoric organic residues: Chemical evidence of livestock-pens in rock-shelters since early neolithic to bronze age.

The characterization of ancient lipids from prehistoric sediments (fumiers) located in a rock-selter has been possible after the optimization of an analytical method based on the microwave-assisted extraction and solid-phase extraction clean-up step and a final derivatization step followed by gas chromatography with mass spectrometry. Eight sterols and two bile acids were detected just in the partially burned and unburned layers of the fumiers (animal organic residues deriving from manure/dung). The relationship between some of these compounds can be used to distinguish the biogenic origin of the samples, concluding that these strata (from Early Neolithic to Late Chalcolithic/Early Bronze Age) can be classified as ruminant residues. Three main periods of activity are observed over a period of 2000 years: one from 3990 ± 40 before present (4530-4410 calibrated before present) to 4100 ± 40 before present (4820-4750/4730-4510/4470-4450 calibrated before present), the second from 4470 ± 40 before present (5300-4970 calibrated before present) to 5490 ± 30 before present (6310-6275/6230-6220 calibrated before present) and the third from 5880 ± 30 before present (6775-6765/6750-6645 calibrated before present) to 6010 ± 30 before present (6940-6780/6765-6755 calibrated before present). Chemical data obtained are in concordance with the previous results obtained in the area.

Iniferter-mediated grafting of molecularly imprinted polymers on porous silica beads for the enantiomeric resolution of drugs.

A surface-imprinted chiral stationary phase for the enantiomeric resolution of the antidepressant drug, citalopram, is presented in this work. N, N'-diethylaminodithiocarbamoylpropyl(trimethoxy)silane has been used as silane iniferter for the surface functionalization of the solid silica support. A molecularly imprinted polymer thin film, in the nm scale, was then grafted on the silanized silica using itaconic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linker in the presence of the template S-citalopram. The total monomer amount was calculated to obtain the desired thickness. Non-imprinted stationary phases were prepared similarly in the absence of S-citalopram. Characterization of the materials was carried out by scanning electron microscopy, thermogravimetric analysis, elemental analysis and Fourier transform infrared spectroscopy. Stationary phases have been applied to the chromatographic separation of the target. Conditions for best chromatographic resolution of the enantiomers were optimized, and it was found that a mobile phase consisting of a mixture of formate buffer (40 mM, pH 3) and acetonitrile (30:70 v/v) at 40 °C provided best results. Binding behaviour of the developed material was finally assessed by batch rebinding experiments. The obtained binding isotherm was fitted to different binding models being the Freundlich-Langmuir model, the one that best fitted the experimental data. The developed material has shown high selectivity for the target enantiomer, and the stationary phase could be undoubtedly exploited for chiral separation of the drug.

LC-QTOF-MS-based targeted metabolomics of arginine-creatine metabolic pathway-related compounds in plasma: application to identify potential biomarkers in pediatric chronic kidney disease.

Chronic kidney disease (CKD) is a major epidemiologic problem which causes several disturbances in adults and in pediatrics. Despite being a worldwide public health problem, information available for CKD in the pediatric population is scarce. For that reason, an ion-pair reversed-phase liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) method has been developed and validated in order to analyze 16 amino acids, amino acid derivatives, and analogous compounds related to the arginine-creatine metabolic pathway that are suspicious of being increased or decreased in plasma from patients with CKD. The analytical method involved the addition of dithiothreitol, a reducing agent which reduces disulfide and thus giving total aminothiol concentration, as well as a simple precipitation of plasma proteins. Moreover, despite amino acids being usually derivatized to improve their retention time and to enhance their signal, for this method, an ion-pairing reagent was used, thus avoiding the need for derivatization. Subsequently, analysis of plasma from pediatric patients suffering from CKD and control pediatrics was carried out. As a result, glycine, citrulline, creatinine, asymmetric dimethylarginine (ADMA), and symmetric dimethylarginine (SDMA) were significantly increased in patients with CKD, regardless of their creatinine level, whereas in addition to these compounds dimethylglycine was also increased when CKD patients had plasma creatinine concentrations above 12 µg mL(-1), thus all are suggested as potential biomarkers for renal impairment.

A novel method for the identification of inorganic and organic gunshot residue particles of lead-free ammunitions from the hands of shooters using scanning laser ablation-ICPMS and Raman micro-spectroscopy.

A method based on scanning laser ablation and inductively coupled plasma-mass spectrometry (SLA-ICPMS) and Raman micro-spectroscopy for the detection and identification of compounds consistent with gunshot residue particles (GSR) has been developed. The method has been applied to the characterization of particles resulting from the discharge of firearms using lead-free ammunition. Modified tape lifts were used to collect the inorganic and organic residues from skin surfaces in a single sample. Using SLA-ICPMS, aggregates related to the composition of the ammunition, such as Cu-Zn-Sn, Zr-Sr, Cu-Zn, Al-Ti, or Al-Sr-Zr were detected, but this composition is only consistent with GSR from lead-free ammunitions. Additional evidence was provided by micro-Raman spectroscopy, which identified the characteristic organic groups of the particles as centralite, diphenylamine or their nitrated derivatives, which are indicative of GSR.

Unambiguous characterization of gunshot residue particles using scanning laser ablation and inductively coupled plasma-mass spectrometry.

A new method based on scanning laser ablation and inductively coupled plasma-mass spectrometry (LA-ICPMS) for the detection and identification of gunshot residue (GSR) particles from firearms discharges has been developed. Tape lifts were used to collect inorganic residues from skin surfaces. The laser ablation pattern and ICPMS conditions were optimized for the detection of metals present in GSR, such as (121)Sb, (137)Ba, and (208)Pb. Other isotopes ((27)Al, (29)Si, (31)P, (33)S, (35)Cl, (39)K, (44)Ca, (57)Fe, (60)Ni, (63)Cu, (66)Zn, and (118)Sn) were monitored during the ICPMS analyses to obtain additional information to possibly classify the GSR particles as either characteristic of GSR or consistent with GSR. In experiments with real samples, different firearms, calibers, and ammunitions were used. The performed method evaluation confirms that the developed methodology can be used as an alternative to the standard scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) technique, with the significant advantage of drastically reducing the analysis time to less than 66 min.

Analytical procedures for the determination of the selective serotonin reuptake inhibitor antidepressant citalopram and its metabolites.

The antidepressant citalopram (CIT) is a potent and highly selective serotonin reuptake inhibitor (SSRI) which has been introduced in therapy as a racemic drug. CIT has been used to treat central nervous system affective disorders such as depression, anxiety, obsessive-compulsive disorders, various phobias, borderline personality disorders, bipolar disorders as well as indications wherein inhibition of serotonin reuptake is desired. CIT is demethylated to demethylcitalopram (DCIT) and didemethylcitalopram (DDCIT), which retain considerable activity as SSRIs. Therefore, in recent years, the monitoring of the levels of these analytes in biological fluids for toxicological and therapeutic purposes has been a target worthy of interest. In addition, the differences in activity between CIT enantiomers established the need to assess its behaviour in the field of pharmacological research. It is also necessary to develop analytical methodologies that make it possible to determine the levels of enantiomer concentrations. This review includes most of the published analytical methods for achiral assay of racemic CIT and its metabolites based on high-performance liquid chromatography coupled with UV, fluorescence and mass spectrometry detectors, capillary electrophoresis and gas chromatography with mass spectrometry detectors among others. With regard to the monitoring of enantiomers of CIT and of its metabolites, stereoselective methods based on chiral chromatographic columns, chiral additives in mobile phases and on the derivatization with a chiral reagent are also collected. In addition, different procedures of extraction are mentioned as well as liquid-liquid extraction, solid-phase extraction, solid-phase microextraction, automated online extraction or liquid-phase microextraction in different biological and environmental samples.

Identification and quantification of glucosinolates in rapeseed using liquid chromatography-ion trap mass spectrometry.

A rapid and sensitive method for the speciation and quantification of glucosinolates in rapeseed is described. The method combines liquid chromatography (LC) with ion trap mass spectrometry (ITMS) detection. Electrospray ionization (ESI) has been chosen as the ionization technique for the on-line coupling of LC with ITMS. Glucosinolates are extracted from different rapeseeds with MeOH and the extracts are cleaned-up by solid phase extraction with Florisil cartridges. Aqueous extracts are injected into LC system coupled to an ITMS, leading to accurately quantify eight of the most important glucosinolates in rapeseed, by MS2 mode and confirming their structure by MS3 acquisition. All the glucosinolates found in rapeseeds provide good signals corresponding to the deprotonated precursor ion [M-H]-. The method is reliable and reproducible, and detection limits range from 0.5 nmol g(-1) to 3.7 nmol g(-1) when 200 mg of dried seeds of certified reference material are analyzed. Within-day and between-day RSD percentages range between 2.4-14.1% and 3.9-16.9%, respectively. The LC-ESI-ITMS-MS method described here allows for a rapid assessment of these metabolites in rapeseed without a desulfatation step. The overall process has been successfully applied to identify and quantify glucosinolates in rapeseed samples.

Sequential stir bar extraction, thermal desorption and retention time locked GC-MS for determination of pesticides in water.

A method based on sequential stir bar sorptive extraction followed by automated thermal desorption-GC-MS for the determination of pesticides in underground and superficial water samples has been developed. Retention time locked GC-MS and deconvolution Automated Mass Spectral Deconvolution and Identification System software allows the use of pesticide databases for identification and quantification in routine applications. Quantitation limits and repetitivity using full scan mass spectrometric determination guarantee the applicability of the method, which enables considerable savings to be made in total analysis time, with data processing times of around 2 min/sample.

Fungicide distribution in vitiviniculture ecosystems according to different application strategies to reduce environmental impact.

Systematic fungicides treatments in vine-growing European ecosystems have been conducted for decades. The goal of this study was to determine the mobility and persistence of 20 fungicides used in two viticultural zones in Atlantic and Mediterranean climates, from the moment of their application until their distribution throughout different compartments of the ecosystem: soil, water, grapes, musts and wines. This study also sought to obtain valuable information to reduce the usage of these products without affecting the health of the vines. For this purpose, different phytosanitary treatments were applied, using dosing criteria based on data provided by meteorological stations, degree-day accumulation, phenological state, and growers' criteria. The observed differences between studied geographical areas were not significant with regard to chemical accumulation in the soil and water; however, they were significantly different regarding to grapes, musts, and wines.

Quantification of fenitrothion and its main metabolites in poplar leaves by isotope dilution gas chromatography-mass spectrometry coupled with solid-phase microextraction.

A sensitive and specific method for determining fenitrothion and its main metabolites, 3-methyl-4-nitrophenol and fenitrooxon, in poplar leaves using deuterated isotopes as the internal standard is described. The analytes and the labeled isotopes were extracted from leaves by solid-phase microextraction and subsequently analysed by gas chromatography coupled with mass spectrometry. The method had a chromatographic run time of 17.0 min and good linearity over the range 0.01-10 mg kg(-1). The detection limits ranged between 2.5 and 0.6 microg kg(-1). The isotopic dilution technique allowed improving significantly the repetitivity even using different fibers with the same coating (RSD<5.1%). The method was applied successfully to study the persistence of fenitrothion in forestal matrices in a poplar forest after cannon spray application of the insecticide.

Simultaneous determination of citalopram, fluoxetine and their main metabolites in human urine samples by solid-phase microextraction coupled with high-performance liquid chromatography.

A liquid chromatography method was developed for the determination of some frequently prescribed selective serotonin re-uptake inhibitors (SSRI) - citalopram and fluoxetine - and its main metabolites - demethylcitalopram, didemethylcitalopram and norfluoxetine - in human urine samples, using a previous stage of solid-phase microextraction. All the extraction parameters influencing adsorption (extraction time, temperature, pH, ion strength and organic modifier addition) and desorption (desorption time and desorption solvent mixture composition) of the analytes on the fiber have been studied. A satisfactory reproducibility for extraction from urine samples (R.S.D.<10%) was obtained. The linearity for urine ranged from 0.05 to 2 mg l(-1) with limits of detection close to 0.01 mg l(-1), which cover the typical urinary concentrations obtained for citalopram, fluoxetine and their metabolites.

Determination of fluoxetine, norfluoxetine and their enantiomers in rat plasma and brain samples by liquid chromatography with fluorescence detection.

Fluoxetine (FLX) and norfluoxetine (NFLX) racemic mixtures were determined by reversed-phase liquid chromatography with fluorescence detection (lambda(exc)=227 nm, lambda(em)=305 nm). The calibration curves prepared from drug-free plasma and brain were linear in the range of 5-1000 ng ml(-1) and 100-40,000 ng g(-1) for doped samples, with detection limits of 3.2 and 2.1 ng ml(-1) in plasma and 31.5 and 26.1 ng g(-1) in brain tissue for FLX and NFLX, respectively. Enantiomer determination was carried out through normal phase HPLC-FD (lambda(exc)=224 nm, lambda(em)=336 nm) after precolumn chiral derivatization with R-1-(1-naphthyl)ethyl isocyanate. Standard curves also prepared in a drug-free matrix were linear for each enantiomer over the range of 2-1000 ng ml(-1) and 20-7000 ng g(-1) with detection limits for the four compounds ranging between 0.2 and 0.5 ng ml(-1) in plasma and between 3.0 and 8.2 ng g(-1) in brain tissue. In both methods the analytes were isolated from the biological matrix by a new solid-phase extraction procedure with recovery in plasma and brain over 90 and 87%, respectively. The repeatability of this extraction procedure was satisfactory within-day and between-day with CV<9.1%. This study also offered the opportunity to obtain an assessment of the potential relationships between the concentration of individual enantiomers of FLX and NFLX in plasma and brain tissue after chronic treatment with racemic FLX at a dose intended to mimic the human plasma concentration of FLX in standard clinical conditions, and therefore should make for more reliable extrapolation of neurochemical findings in other species.

Molecularly imprinted nanoparticles grafted to porous silica as chiral selectors in liquid chromatography.

The work presented here explores the grafting of molecularly imprinted nanoparticles (MIN) on silica beads for the development of new chiral stationary phases (CSP). Both solid-phase imprinting and precipitation polymerisation were tested for MIN synthesis though the latter approach was the only one that provided efficient chiral selectors. MIN particles were prepared by iniferter polymerisation initiated by UV radiation, using itaconic acid as functional monomer and ethylene dimethacrylate as cross-linker. This resulted in particles with an average size of 249.0±4.0nm which were covalently immobilised onto chromatographic silica beads. The resultant CSP based on the composite silica beads-MIN was capable of resolving the racemate of the antidepressant drug citalopram and also separating its major metabolites by liquid chromatography, with better efficiency and peak symmetry than other MIP based CSP. The methodology presented here allowed for the quantification of the pharmacologically active enantiomer (+)-(S)-citalopram (SCIT) and its main metabolites (+)-(S)-desmethylcitalopram (SDCIT) and (+)-(S)-didesmethylcitalopram (SDDCIT) in urine, registering mean recoveries that ranged from 91.5 to 103.7% with RSD values that were below 10% in all tested concentration levels (0.1, 0.75 and 5µgmL-1), which confirmed method suitability for the intended application.

A novel strategy for Cr(III) and Cr(VI) analysis in dietary supplements by speciated isotope dilution mass spectrometry.

In recent years, Cr speciation in dietary supplements has become decisive in the evaluation of their health risks. Despite being an beneficial micronutrient, Cr(III) can be toxic at living organisms at high concentrations, while Cr(VI) is known to be highly toxic and carcinogenic. The main objective of this work was to optimize an analytical methodology for the extraction and accurate quantification of Cr(III) and Cr(VI) in dietary supplements. The extraction of Cr species was carried out with 50mM EDTA solution on a hotplate under optimized conditions. Special attention was paid to bidirectional species transformations. No noticeable oxidation of Cr(III) into Cr(VI) was observed and the reduction to Cr(III) only occurred at very high Cr(VI) concentrations. Cr(III) as Cr(EDTA)(-) complex was chromatographically separated from Cr(VI), retained as CrO4(2-), on an anion exchange column coupled to inductively coupled plasma mass spectrometry (LC-ICP-MS). The limit of quantification (0.08µgg(-1)) was below the limit established for Cr enriched yeasts by the European Union. Eleven dietary supplements were analyzed and Cr(III) and Cr(VI) quantification was carried out by external calibration monitoring (52)Cr isotope and by speciated isotope dilution mass spectrometry (SIDMS) adding (50)Cr(III) and (53)Cr(VI) spikes. Total Cr was also quantified by ICP-MS and mass balance between total Cr and the sum of Cr(III) and Cr(VI) was achieved. In eight of the eleven tested supplements Cr(III) calculated amounts were higher than those indicated by the manufacturer, but only one of them exceeded the 250µgday(-1) recommended by World Health Organization (WHO). In contrast, it is worth noting that Cr(VI) amounts beyond the recommendations of the European Union for Cr enriched yeasts were found in five supplements. These results revealed that more accurate and rigorous quality assurance protocols should be applied to the testing of the final products, including the analysis of both Cr(III) and Cr(VI).

Water compatible stir-bar devices imprinted with underivatised glyphosate for selective sample clean-up.

This paper reports the development of stir bars with a new MIP based coating, for the selective sorptive extraction of the herbicide glyphosate (GLYP). Molecular imprinting of the polymer has directly been carried out employing underivatised GLYP as the template molecule. Due to the poor solubility of the target compound in organic solvents, the MIP methodology has been optimised for rebinding in aqueous media, being the synthesis and the rebinding steps carried out in water:methanol mixtures and pure aqueous media. The coating has been developed by radical polymerisation initiated by UV energy, using N-allylthiourea and 2-dimethyl aminoethyl methacrylate as functional monomers and ethylene glycol dimethacrylate as the cross-linker. Mechanical stability of the coating has been improved using 1,3-divinyltetramethyldisiloxane in the polymerisation mixture. Under the optimised conditions, the MIP has demonstrated excellent selectivity for the target compound in the presence of structural analogues, including its major metabolites. The applicability of the proposed method to real matrices has also been assessed using river water and soil samples. Registered mean recoveries ranged from 90.6 to 97.3% and RSD values were below 5% in all cases, what confirmed the suitability of the described methodology for the selective extraction and quantification of GLYP.

Liquid chromatography-quadrupole time of flight tandem mass spectrometry-based targeted metabolomic study for varietal discrimination of grapes according to plant sterols content.

Grapevine and derived products are rich in a wide range of compounds and its quality mainly depends on its metabolites, as a result of viticulture practices. Plant sterols, also called phytosterols (PS), are secondary metabolites regarded as bioactive substance present in grape berries and other plant-based food. The present study deals with a metabolomic approach focusing on phytosterols family in six varieties of Rioja grapes (Cabernet Sauvignon, Tempranillo, Graciano, Garnacha, White Garnacha and Viura), in order to find significant differences among them. Liquid chromatography- mass spectrometry with a quadrupole-time of flight mass analyzer (LC-QTOF) was used to find as many metabolites as possible in the different grape berry fractions, and using statistics to help finding significant clustering of the metabolic profile of pulp, peel and seeds in relation to the variety. The best chromatographic and detection conditions were achieved by gas phase ionization via atmospheric pressure chemical ionization (APCI) in positive mode. Furthermore, analysis with electrospray (ESI) is also needed for phytosterol derivatives confirmation. Putative compounds of interest in the analyzed samples were found by an automated compound extraction algorithm (Molecular Feature Extraction, MFE) and an initial differential expression from the data was created with the aid of commercial software. Once the data were collected, the results were filtered, aligned and normalized, and evaluating applying one-way analysis of variance (ANOVA) with a 95% significance level. For sample class prediction, partial least square-discriminant analysis (PLS-DA) is used as a supervised pattern recognition method and excellent separation among the grape varieties is shown. An overall accuracy of 93.3% (pulp samples), 100.0% (peel) or 96.7% (seeds) in discriminating between grape varieties was achieved when comparing the different fractions. In general, 7 PS derivatives were identified with ID scores higher than 84%.

Molecularly imprinted polymers as a tool for the study of the 4-ethylphenol metabolic pathway in red wines.

A molecularly imprinted polymer (MIP) based methodology is described here for the determination of compounds that belong to the 4-ethylphenol (4EP) metabolic pathway in red wines. To this end, two MIP materials have been developed: a 4EP MIP as a class-selective material to extract phenols that belong to the 4EP metabolic pathway and a coumaric acid (CA) imprinted polymer as a MIP-based stationary phase capable of selectively separating these phenols on HPLC analysis, obtaining clean chromatograms. 4-vinyl pyridine and ethylene glycol dimethacrylate were respectively used as functional monomer and cross-linker for both MIPs. Once polymer compositions were optimised, the 4EP MIP was packed into SPE cartridges for wine sample clean-up and CA MIP was packed into HPLC columns to chromatographically separate the compounds present in the eluates obtained after SPE extraction. The accuracy of the proposed method was tested spiking wine samples with known concentrations of target compounds and subsequently, analytes were quantified by the standard addition method. Registered mean recoveries ranged from 95.2 to 109.2% and RSD values were below 10% in most cases. The described methodology was found to be suitable for the selective extraction and quantification of the compounds that belong to the 4EP metabolic pathway in red wines with minimal matrix effects and could be undoubtedly exploited to monitor 4EP and its precursors in wines.

Characterization of organic gunshot residues in lead-free ammunition using a new sample collection device for liquid chromatography-quadrupole time-of-flight mass spectrometry.

The identification of characteristic organic gunshot residues (OGSR) provides conclusive evidence in the elucidation of elemental profiles when lead-free ammunition is fired. OGSR also prevents false negatives. Toward this aim, a quick and efficient method based on liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-QTOF) was developed to detect and identify 18 gunpowder additives in gunshot residues (GSR). The unequivocal identification of target analytes was assured by using MS/MS mode. Swabs were compared with home-modified tape lift supports covered with a PTFE layer to determine the better sampling technique. The modified tape lift provided better extraction recoveries and enabled the analysis of inorganic and organic GSR simultaneously. The developed method was applied to the analysis of GSR from four different lead-free ammunitions. Diphenylamine and its nitrated degradation products and centralites were identified in all samples, providing strong evidence of GSR.

Rational design and chromatographic evaluation of histamine imprinted polymers optimised for solid-phase extraction of wine samples.

This article reports on the computational design, development and application of a molecularly imprinted polymer (MIP) with specific affinity towards histamine. Computational modelling was used to screen a monomer library in order to select the monomers able to form the strongest complex with the target analyte. These were subsequently used for MIP synthesis by radical polymerisation initiated by UV. MIPs were then evaluated by liquid chromatography and solid phase extraction (SPE) and best MIP behaviour was observed when itaconic acid was used as functional monomer. Finally, after optimisation of the polymer composition, MIPs were used as adsorbents for SPE and clean-up of histamine in wine samples. The proposed histamine extraction method with the MIP-SPE cartridge was found to be reproducible (<5% RSD) and accurate (93-99% recovery) and provided clear wine extracts. The described methodology is simple and fast and is suitable for the selective histamine extraction and its subsequent quantification by HPLC-DAD from complex matrices such as wine samples.