Influence of Unsaturations on the Organization and Air Reactivity of Triglyceride Monolayers.

The behavior of Langmuir monolayers of saturated and unsaturated C18 triglycerides (TAGs) was studied as two-dimensional (2D) models for paint systems at the air-water interface or transferred onto solid films. The organization of saturated tristearin (C18:0) monolayer was probed thanks to grazing incidence X-ray diffraction: one observes a hexagonal packing of the chains perpendicular to the air-water interface, in contrast to what is described in the literature. Conversely, the mono- and polyunsaturated TAGs (triolein C18:1, trilinolein C18:2, and trilinolenin C18:3) monolayers do not present any organization at the air-water interface but do exhibit peculiar reactivity regarding the air atmosphere. The obtained results derived from the evolution of surface pressure-molecular area isotherms and monolayer compressibility under different atmospheres over time, combined with ultrahigh-vacuum infrared (UHV-FTIR) spectroscopy, showed the adsorption of O2 molecules in the monolayer together with chemical reactions with hydrocarbon chains. The kinetic effect of lead ions, known to be efficient siccative agents in oil paints, was also assessed: the addition of Pb2+ in the subphase induces an increase of the O2 adsorption.

Observations of a streak texture in the hybrid-aligned smectic-C phase.

A novel structure was observed below the smectic-A-smectic-C phase transition in a very thin open cell having an air interface above and enforced planar anchoring at the substrate below. The structure appears as periodic dark and light streaks running perpendicular to the oily streaks, which are present in the smectic-A phase [D. Coursault et al., Soft Matter, 2016, 12, 678]. These new streaks, which we call "soapy streaks", form by extending from one oily streak to the next in discrete steps, eliminating optical evidence at visible wavelengths of the oily streaks. At lower temperatures the streaks can undulate and exhibit a sawtooth-like structure; such a structure is chiral in two dimensions. A possible scenario for the origin of these streaks is presented.

Charge and aggregation pattern govern the interaction of plasticins with LPS monolayers mimicking the external leaflet of the outer membrane of Gram-negative bacteria.

Bacterial resistance to antibiotics has become today a major public health issue. In the development of new anti-infectious therapies, antimicrobial peptides appear as promising candidates. However, their mechanisms of action against bacterial membranes are still poorly understood. We describe for the first time the interaction and penetration of plasticins into lipid monolayers and bilayers modeling the two leaflets of the asymmetrical outer membrane of Gram-negative bacteria. The lipid composition of these monolayers mimics that of each leaflet: mixtures of LPS Re 595 mutant and wild type S-form from Salmonella enterica for the external leaflet, and SOPE/SOPG/cardiolipin (80/15/5) for the inner one. The analysis of the interfacial behavior of native (PTCDA1) and modified (PTCDA1-KF) antimicrobial plasticins showed that PTCDA1-KF exhibited better surface properties than its unmodified counterpart. Both peptides could penetrate into the model monolayers at concentrations higher than 0.1 µM. The penetration was particularly enhanced for PTCDA1-KF into the mixed LPS monolayer, due to attractive electrostatic interactions. Grazing X-ray diffraction and atomic force microscopy studies revealed the changes in LPS monolayers organization upon peptide insertion. The interaction of plasticins with liposomes was also monitored by light scattering and circular dichroism techniques. Only the cationic plasticin achieved full disaggregation and structuration in α helices, whereas the native one remained aggregated and unstructured. The main steps of the penetration mechanism of the two plasticins into lipid models of the external leaflet of the outer membrane of Gram-negative bacteria have been established.

Impact of the spacer on the condensing effect of fluorinated chains investigated by grazing incidence X-ray diffraction on ultrathin Langmuir monolayers.

Langmuir monolayers of double perfluoroalkyl(alkyl) chain amphiphiles fitted with a monomorpholinophosphate polar head, [C(n)F(2n+1)(CH(2))(m)O](2)P(O)[N(CH(2)CH(2))(2)O] (di(FnHm)MP with n = 6, 8, or 9; and m = 1 or 2), were investigated by surface pressure (π)/molecular area (A(0)) compression isotherms for temperatures ranging from 15 to 50 °C, and by grazing-incidence X-ray diffraction (GIXD) at 25 °C. Ultrathin monolayers were obtained for these short surfactants. Though the hydrocarbon spacer is short, it has a remarkable impact on the monolayer's organization. At 25 °C, whereas di(F8H2)MP monolayer presents a liquid expanded (LE)/liquid condensed (LC) transition, simply replacing one CH(2) by a CF(2) in the latter compound's structure at constant chain length, i.e. shortening the spacer from 2 to 1 CH(2) (as in di(F9H1)MP), suppresses the LE phase. At 25°, GIXD established that for both di(F8H2)MP and di(F9H1)MP, the chains form an hexagonal lattice in the LC phase. The collective tilt of the two compounds is close to zero. The lattice of the dense phase can be compressed, as assessed by the continuous linear decrease of the d spacing with increasing pressure. This indicates that the azimuthal distribution of the molecular tilts is progressively reduced upon compression. The d value for di(F9H1)MP is significantly lower than that of di(F8H2)MP, providing evidence for strong condensing effect of the fluorinated chains. Molecular areas were determined directly from the compression curves and also from the X-ray data, the latter allowing reconstruction of the compression isotherms. The calculated lattice compressibilities are ~30% and 50% of the macroscopic compressibilities for di(F9H1)MP and di(F8H2)MP, respectively. Comparison with the experimentally determined isotherms shows that the monolayer of di(F9H1)MP is more stable than that of di(F8H2)MP. The enthalpies and entropies determined for di(F9H1)MP and di(F8H2)MP, derived from the Clausius-Clapeyron equation, confirm that the observed transitions are both of the LE/LC type, although the triple point temperatures are strikingly different (27 °C vs -18 °C); this large difference further illustrates the stabilizing effect of the fluorinated chains. Disorder is hindered by the fluorinated chains and facilitated by a hydrocarbon spacer when larger than 1 CH(2).

Solvent-exchange process in MOF ultrathin films and its effect on CO2 and methanol adsorption.

Metal-organic framework (MOF) activation is crucial for the use of MOFs in several applications and solvent-exchange process is a necessary step in many activation methods. In this contribution, we have explored in situ MOF monolayer film formation at the air-water interface. Nanoparticles (NPs) of the Al trimesate MIL-96(Al) retain chloroform into their micropores, which considerably diminishes the CO2 adsorption capacity of MOF films. However, a solvent-exchange process between chloroform and water increases CO2 film adsorption capacity by 30%. Total Reflection X-Ray Fluorescence (TRXF) allows studying the kinetics of this process at the air-water interface, that strongly depends on the NP size. The conclusions derived from in situ studies allow optimizing the ex situ activation procedure of MIL-96(Al) films deposited onto quartz crystal microbalance (QCM) substrates in order to maximize CO2 and methanol adsorption.

Structural organisation of cationic dioctadecyldimethyammonium bromide monolayers in presence of hyaluronic acid.

Langmuir monolayers of dioctadecyldimethyammonium bromide and its interaction with the natural mucopolysaccharide hyaluronic acid are studied using thermodynamic methods and X-ray diffraction at grazing incidence. The 2D crystalline lattice parameters of different phases are determined. The monolayer compressibility, the linear crystalline compressibility components and the thermoelastic expansion coefficient are evaluated. The biopolymer stabilises the monolayer structural properties, increases the collapse pressure and the correlation length of the 2D crystalline domains. The results show that this lipid has a potential for developing of stabilised drug delivery systems of anionic biopolymers like hyaluronic acid, oligomers and genes.

Interactions of lipid monolayers with the natural biopolymer hyaluronic acid.

The interaction of the natural mucopolysaccharide hyaluronic acid with different lipids, present in the natural membranes, was studied at the lipid/water interface using thermodynamic methods and X-ray diffraction. The results show that this biopolymer modifies the properties and the structure of the lipid monolayer. The two-dimensional crystalline lattice and domain structure of the charged octadecylamine monolayer are strongly disturbed by the hyaluronic acid, the monolayer compressibility increases and the monolayer collapse pressure drops down. In addition, the presence of charged lipid interfaces influences the structural organisation of the hyaluronic acid at the membrane/water interfaces. The impacts of these results on the structural organisation at the membrane interface are discussed.

Depletion of alloreactive donor T cells using immunomagnetic cell selection.

Donor T cells support both engraftment and immune reconstitution after allogeneic BMT. Moreover, they may exert potent anti-tumor effects (graft-versus-leukemia, GVL), which are used for adoptive immunotherapy. On the other hand, infusion of allogeneic T cells is frequently associated with the manifestation of immune reactions against healthy tissue, which may lead to life-threatening graft-versus-host disease (GVHD). To overcome this problem, we developed a new strategy for the exclusive depletion of alloreactive cells from donor leukocytes. We activated donor T cells by co-cultivation with a stroma layer of recipient cells and analyzed activation kinetics of CD3+, CD4+ and CD8+ T cells. Based on these data, activated cells were then depleted based on expression of activation-induced antigens using magnetic cell sorting (MACS). Alloreactivity of donor T cells was remarkably decreased after depletion of cells expressing either CD25 or CD69, as was shown in suitable in vitro assays. The lowest level of alloreactivity was found when both CD25- and CD69-positive cells were depleted. Importantly, depleted cell fractions preserved reactivity against third-party cells. In summary, we found that MACS-based ex vivo depletion of alloreactive cells may be a suitable way to prevent GVHD and therefore improve allogeneic BMT and adoptive immunotherapy.

Reference values for cardiac troponins I and T in a goal-oriented concept of health: cardiac marker values in a series of outpatients without acute coronary syndromes.

BACKGROUND: Cardiac troponins are part of the new definition of acute myocardial infarction (AMI) by the European Society of Cardiology and the American College of Cardiology (ESC/ACC). In the new guidelines, it was suggested to establish reference values for cardiac troponins to calculate the 0.99 quantile (Q99) as cutoff for AMI diagnosis. PATIENTS AND METHODS: We run a prospective series of troponin measurements in unselected outpatients who had no suspicion of cardiac ischemia. The selection of patients as reference population is based on a "goal-oriented concept of health". One hundred and ninety-five patients agreed that 10-ml additional blood was drawn at the occasion of the venous puncture done routinely in the evaluation of their case. Cardiac troponin I was measured using a point of care (POCT) device (Stratus CS, DadeBehring, TNI-PO). Additionally, heparin-plasma was obtained and immediately deep-frozen to -80 degrees C for later batch measurement of cardiac troponin T (Elecsys 2010, Roche Diagnostics, TnT) and troponin I (Centaur, Bayer, TnI-CL). RESULTS: The Q99 values were 0.14 microg/l for TnI-PO, 0.023 microg/l for TnT and 0.07 microg/l for TnI-CL in patients with creatinine levels below 1.5 mg/dl. These values lay above those obtained from people at good health for reference study purposes. On the level of our cutoffs, CVs were 7.5%, 6.4% and 23.7% for TnI-PO, TnT and TnI-CL, respectively. CONCLUSIONS: Only the TnI-PO and TnT tests fulfilled the imprecision criteria in our study. TnI-PO values between 0.10 and 0.14 microg/l and TnT values between 0.01 and 0.03 microg/l have to be interpreted carefully. Patients presenting with chest pain will be possibly true positives, but patients without chest pain and nondiagnostic ECGs should be subjected to repetitive troponin measurements and further noninvasive investigation and maybe not directly sent to the cardiac catheter laboratory.

Observation of a two-step mechanism in the formation of a superstructure of cadmium-behenic acid Langmuir monolayer: evidence of an intermediate structure.

By means of grazing incidence x-ray diffraction, the structure of a behenic acid monolayer spread over chloride salt solutions of cadmium is observed to evolve from the tilted L2 phase to the superstructure (corresponding to an organized monolayer of ions in addition to the ordered organic film), through an intermediate phase. The studied salt concentrations are below the so-called "threshold" needed for the formation of this superstructure. This kinetic process involving two first-order phase transitions is confirmed by Brewster angle microscopy experiments and surface pressure-area isotherms measured at different times after monolayer deposition.

Variation of the in-plane structure with depth revealed by grazing incidence x-ray diffraction in a thin Langmuir-Blodgett film.

Grazing incidence x-ray diffraction is used to characterize the molecular arrangement of ultrathin Langmuir-Blodgett (LB) multilayers. Using two angles of incidence of the beam allowing its penetration either throughout the complete depth of the film or only through the external layers, we show that it is possible to discriminate between the molecular packing of the deeper monolayers and that of the external monolayers of the LB film.

Radiation-induced synthesis and cryo-TEM characterization of silver nanoshells on linoleate spherical micelles.

We combine the self-assembly properties of amphiphilic molecules with the radiolysis method to produce specific sizes and shapes of metallic nano-objects. Radiolysis is used to synthesize core--shell structures consisting of nanometric linoleate spherical micelles as the core and silver as the shell. The validity of the technique is asserted by cryoelectron microscopy, which is an adequate technique for low density contrasts and core--shell structures. The shells are found to be homogeneous with a size of a few nanometers. Images are used to bring forward the hypothesis of the fabrication process.

Architecture-controlled "SMART" Calix[6]arene self-assemblies in aqueous solution.

Self-assemblies of a calix[6]arene (1) functionalized at the small rim by three imidazolyl arms and at the large rim by three hydrophilic sulfonato groups have been studied in water. Transmission electron microscopy, atomic force microscopy, and in situ dynamic light scattering showed that 1 forms multilamellar vesicles at a concentration equal to or higher than 10(-4) M. At pH 7.8 and 10(-4) M, the multilamellar vesicles present a relatively large polydispersity (50-250 nm in diameter). However, after sonication unilamellar vesicles of much lower polydispersity and smaller size are obtained. The impact of the pH and the presence of Ag+ ions have also been investigated. Whereas increasing the pH led to the formation of giant vesicles (450 nm), monodisperse vesicules of 50 nm were obtained at a pH (6.5) that is only slightly higher than the pKa of the tris(imidazole) core of 1. Most interestingly, in the presence of silver ions, micelles (2.5 nm large) were obtained instead of vesicles. These observations are attributable to the imidazole core in 1 that is not only sensitive to the presence of protons but also can bind a silver cation. The resulting geometrical change in the monomeric units triggers the collapse of the vesicles into micelles. This shows that the implementation of an acid-base functionality such as an imidazole group in the hydrophobic core of the amphiphilic calix[6]arene makes the aggregation architecture responsive to the pH and to metal ions.

pH-dependent kinetics of MgCl2 adsorption under a fatty-acid Langmuir film.

The effect of subphase pH (5.5 and 10.5) on the structure of behenic-acid monolayers was investigated during Mg(2+) adsorption by means of Grazing Incidence X-ray Diffraction (GIXD) and Brewster Angle Microscopy (BAM). The final phase corresponding to an ion superlattice commensurate to the behenic-acid cell is pH-independent. In contrast, the sequence of phases evidenced from the initial L(2)-phase to this final state presents at pH 10.5 an additional stage associated to a film condensation toward the L' (2)-phase. The structures of the intermediate states preceding the superstructure nucleation are slightly different, both with a short-range fatty-acid order. Finally, a laser light effect that could result from visible light absorption by the inorganic complexes is evidenced in the final state as well as in the intermediate phases.

Influence of a neoglycolipid and its PEO-lipid moiety on the organization of phospholipid monolayers.

The surface properties of the neoglycolipid (GlcNAcE(3)G(28)) and of its PEO-lipid (E(3)G(28)) moiety mixed with phospholipids (dipalmitoylphosphatidylcholine, DPPC; distearoylphosphatidylcholine, DSPC; diarachidoylphosphatidylcholine, DAPC; and dibehenoylphosphatidylcholine, DBPC) were studied in Langmuir monolayers at various mixture compositions and surface pressures. The pi-A isotherms of the pure compounds revealed that because of the presence of the sugar group in its molecule, GlcNAcE(3)G(28) collapsed at a higher surface pressure and occupied a larger molecular area than the PEO-lipid moiety. It was also observed that the presence of the PEO-lipid (E(3)G(28)) in the mixtures triggered a strong alteration of both phospholipid pi-A isotherm profiles and surface diffraction spectra, an indication that the disordering of the initially structured phospholipid monolayers took place. Unlike E(3)G(28), GlcNAcE(3)G(28) did not disorganize phospholipid monolayers but generated a partial segregation of the film-forming components. The calculated excess free energies of mixing (DeltaG(exc)) for GlcNAcE(3)G(28)-phospholipid mixtures enabled us to predict the stability of such systems.