RESUMEN
This paper reports a method for label-free single-cell biophysical analysis of multiple cells trapped in suspension by electrokinetic forces. Tri-dimensional pillar electrodes arranged along the width of a microfluidic chamber define actuators for single cell trapping and selective release by electrokinetic force. Moreover, a rotation can be induced on the cell in combination with a negative DEP force to retain the cell against the flow. The measurement of the rotation speed of the cell as a function of the electric field frequency define an electrorotation spectrum that allows to study the dielectric properties of the cell. The system presented here shows for the first time the simultaneous electrorotation analysis of multiple single cells in separate micro cages that can be selectively addressed to trap and/or release the cells. Chips with 39 micro-actuators of different interelectrode distance were fabricated to study cells with different sizes. The extracted dielectric properties of Henrietta Lacks, human embryonic kidney 293, and human immortalized T lymphocytes cells were found in agreements with previous findings. Moreover, the membrane capacitance of M17 neuroblastoma cells was investigated and found to fall in in the range of 7.49 ± 0.39 mF/m2 .
Asunto(s)
Dispositivos Laboratorio en un Chip , Análisis de la Célula Individual , Conductividad Eléctrica , Técnicas Electroquímicas , Humanos , Dióxido de Silicio/químicaRESUMEN
In order to improve the efficacy and safety of treatments, drug dosage needs to be adjusted to the actual needs of each patient in a truly personalized medicine approach. Key for widespread dosage adjustment is the availability of point-of-care devices able to measure plasma drug concentration in a simple, automated, and cost-effective fashion. In the present work, we introduce and test a portable, palm-sized transmission-localized surface plasmon resonance (T-LSPR) setup, comprised of off-the-shelf components and coupled with DNA-based aptamers specific to the antibiotic tobramycin (467 Da). The core of the T-LSPR setup are aptamer-functionalized gold nanoislands (NIs) deposited on a glass slide covered with fluorine-doped tin oxide (FTO), which acts as a biosensor. The gold NIs exhibit localized plasmon resonance in the visible range matching the sensitivity of the complementary metal oxide semiconductor (CMOS) image sensor employed as a light detector. The combination of gold NIs on the FTO substrate, causing NIs size and pattern irregularity, might reduce the overall sensitivity but confers extremely high stability in high-ionic solutions, allowing it to withstand numerous regeneration cycles without sensing losses. With this rather simple T-LSPR setup, we show real-time label-free detection of tobramycin in buffer, measuring concentrations down to 0.5 µM. We determined an affinity constant of the aptamer-tobramycin pair consistent with the value obtained using a commercial propagating-wave based SPR. Moreover, our label-free system can detect tobramycin in filtered undiluted blood serum, measuring concentrations down to 10 µM with a theoretical detection limit of 3.4 µM. While the association signal of tobramycin onto the aptamer is masked by the serum injection, the quantification of the captured tobramycin is possible during the dissociation phase and leads to a linear calibration curve for the concentrations over the tested range (10-80 µM). The plasmon shift following surface binding is calculated in terms of both plasmon peak location and hue, with the latter allowing faster data elaboration and real-time display of the results. The presented T-LSPR system shows for the first time label-free direct detection and quantification of a small molecule in the complex matrix of filtered undiluted blood serum. Its uncomplicated construction and compact size, together with the remarkable performances, represent a leap forward toward effective point-of-care devices for therapeutic drug concentration monitoring.
Asunto(s)
Antibacterianos/sangre , Monitoreo de Drogas/instrumentación , Resonancia por Plasmón de Superficie/instrumentación , Tobramicina/sangre , Aptámeros de Nucleótidos/química , Diseño de Equipo , Oro/química , Humanos , Límite de Detección , Sistemas de Atención de PuntoRESUMEN
Functional bone marrow studies have focused primarily on hematopoietic progenitors, leaving limited knowledge about other fragile populations, such as bone marrow adipocytes (BMAds) and megakaryocytes. The isolation of these cells is challenging due to rupture susceptibility and large size. We introduce here a label-free cytometry microsystem, MarrowCellDLD, based on deterministic lateral displacement. MarrowCellDLD enables the isolation of large, fragile BM-derived cells based on intrinsic size properties while preserving their viability and functionality. Bone marrow adipocytes, obtained from mouse and human stromal line differentiation, as well as megakaryocytes, from primary human CD34+ hematopoietic stem and progenitor cells, were used for validation. Precise micrometer-range separation cutoffs were adapted for each cell type. Cells were sorted directly in culture media, without pre-labeling steps, and with real-time imaging for quality control. At least 106 cells were retrieved intact per sorting round. Our method outperformed two FACS instruments in purity and yield, particularly for large cell size fractions. MarrowCellDLD represents a non-destructive sorting tool for large, fragile BM-derived cells, facilitating the separation of pure populations of BMAds and megakaryocytes to further investigate their physiological and pathological roles.
Asunto(s)
Médula Ósea , Células Madre Hematopoyéticas , Humanos , Ratones , Animales , Microfluídica , Separación Celular/métodos , Megacariocitos , Antígenos CD34 , Células de la Médula Ósea , Diferenciación Celular , Citometría de FlujoRESUMEN
In the past few decades the scientific community has been recognizing the paramount role of the cell microenvironment in determining cell behavior. In parallel, the study of human stem cells for their potential therapeutic applications has been progressing constantly. The use of advanced technologies, enabling one to mimic the in vivo stem cell microenviroment and to study stem cell physiology and physio-pathology, in settings that better predict human cell biology, is becoming the object of much research effort. In this review we will detail the most relevant and recent advances in the field of biosensors and micro- and nano-technologies in general, highlighting advantages and disadvantages. Particular attention will be devoted to those applications employing stem cells as a sensing element.
Asunto(s)
Técnicas Biosensibles , Electrónica , Nanotecnología , Células Madre/citología , HumanosRESUMEN
Recently, there has been increasing attention toward inhaled nanoparticles (NPs) to develop inhalation therapies for diseases associated with the pulmonary system and investigate the toxic effects of hazardous environmental particles on human lung health. Taking advantage of microfluidic technology for cell culture applications, lung-on-a-chip devices with great potential in replicating the lung air-blood barrier (ABB) have opened new research insights in preclinical pathology and therapeutic studies associated with aerosol NPs. However, the air interface in such devices has been largely disregarded, leaving a gap in understanding the NPs' dynamics in lung-on-a-chip devices. Here, we develop a numerical parametric study to provide insights into the dynamic behavior of the airborne NPs in a gas-liquid dual-channel lung-on-a-chip device with a porous membrane separating the channels. We develop a finite element multi-physics model to investigate particle tracing in both air and medium phases to replicate the in vivo conditions. Our model considers the impact of fluid flow and geometrical properties on the distribution, deposition, and translocation of NPs with diameters ranging from 10 nm to 900 nm. Our findings suggest that, compared to the aqueous solution of NPs, the aerosol injection of NPs offers more efficient deposition on the substrate of the air channel and higher translocation to the media channel. Comparative studies against accessible data, as well as an experimental study, verify the accuracy of the present numerical analysis. We propose a strategy to optimize the affecting parameters to control the injection and delivery of aerosol particles into the lung-on-chip device depending on the objectives of biomedical investigations and provide optimized values for some specific cases. Therefore, our study can assist scientists and researchers in complementing their experimental investigation in future preclinical studies on pulmonary pathology associated with inhaled hazardous and toxic environmental particles, as well as therapeutic studies for developing inhalation drug delivery.
RESUMEN
Application of recombinase polymerase amplification (RPA) for pH-based detection of DNA amplification has been investigated. Commercial RPA kits from TwistDx are modified to minimize their pH buffering capacity. Due to the RPA's unique biochemistry, removal of tris from the amplification kit is not enough to lower the buffering capacity of the RPA assay. Even in the absence of tris, RPA components in the commercial kit intrinsically buffer the pH. We show different strategies to minimize the buffering capacity of the RPA kit, while maintaining the amplification efficiency. Even in minimally buffered conditions, it is noticed that RPA's amplification yield is not high enough to overcome the assay's intrinsic buffering capacity. The effect of pyrophosphate precipitation in RPA on the reaction's pH have also been addressed. In conclusion, this work highlights strategies and considerations for the development of pH-based assays from nucleic acid amplification methods which involve ancillary enzymes that catalyze nucleotide hydrolysis.
Asunto(s)
Técnicas Biosensibles , Recombinasas , Bioensayo , Cartilla de ADN , Técnicas de Amplificación de Ácido Nucleico , Recombinasas/genética , Sensibilidad y EspecificidadRESUMEN
This paper reports a novel miniaturized pseudo reference electrode (RE) design for biasing Ion Sensitive Field Effect Transistors (ISFETs). It eliminates the need for post-CMOS processing and can scale up in numbers with the CMOS scaling. The presented design employs silane-mediated transfer of patterned gold electrode lines onto PDMS microfluidics such that the gold conformally coats the inside of microfluidic channel. Access to this electrode network is made possible by using "through-PDMS-vias" (TPV), which consist of high metal-coated SU-8 pillars manufactured by a novel process that employs a patterned positive resist layer as SU-8 adhesion depressor. When integrated with pneumatic valves, TPV and pseudo-RE network were able to bias 1.5 nanoliters (nL) of isolated electrolyte volumes. We present a detailed characterization of our pseudo-RE design demonstrating ISFET operation and its DC characterization. The stability of pseudo-RE is investigated by measuring open circuit potential (OCP) against a commercial Ag/AgCl reference electrode.
RESUMEN
The simplicity of homogeneous immunoassays makes them suitable for diagnostics of acute conditions. Indeed, the absence of washing steps reduces the binding reaction duration and favors a rapid and compact device, a critical asset for patients experiencing life-threatening diseases. In order to maximize analytical performance, standard systems employed in clinical laboratories rely largely on the use of high surface-to-volume ratio suspended moieties, such as microbeads, which provide at the same time a fast and efficient collection of analytes from the sample and controlled aggregation of collected material for improved readout. Here, we introduce an integrated microfluidic system that can perform analyte detection on antibody-decorated beads and their accumulation in confined regions within 15 min. We employed the system to the concomitant analysis of clinical concentrations of Neutrophil Gelatinase-Associated Lipocalin (NGAL) and Cystatin C in serum, two acute kidney injury (AKI) biomarkers. To this end, high-aspect-ratio, three-dimensional electrodes were integrated within a microfluidic channel to impart a controlled trajectory to antibody-decorated microbeads through the application of dielectrophoretic (DEP) forces. Beads were efficiently retained against the fluid flow of reagents, granting an efficient on-chip analyte-to-bead binding. Electrokinetic forces specific to the beads' size were generated in the same channel, leading differently decorated beads to different readout regions of the chip. Therefore, this microfluidic multianalyte immunoassay was demonstrated as a powerful tool for the rapid detection of acute life-threatening conditions.
Asunto(s)
Técnicas Analíticas Microfluídicas , Monitoreo Fisiológico , Humanos , Inmunoensayo , Técnicas Analíticas Microfluídicas/instrumentación , Microfluídica , MicroesferasRESUMEN
Hydrodynamic-based microfluidic platforms enable single-cell arraying and analysis over time. Despite the advantages of established microfluidic systems, long-term analysis and proliferation of cells selected in such devices require off-chip recovery of cells as well as an investigation of on-chip analysis on cell phenotype, requirements still largely unmet. Here, we introduce a device for single-cell isolation, selective retrieval and off-chip recovery. To this end, singularly addressable three-dimensional electrodes are embedded within a microfluidic channel, allowing the selective release of single cells from their trapping site through application of a negative dielectrophoretic (DEP) force. Selective capture and release are carried out in standard culture medium and cells can be subsequently mitigated towards a recovery well using micro-engineered hybrid SU-8/PDMS pneumatic valves. Importantly, transcriptional analysis of recovered cells revealed only marginal alteration of their molecular profile upon DEP application, underscored by minor transcriptional changes induced upon injection into the microfluidic device. Therefore, the established microfluidic system combining targeted DEP manipulation with downstream hydrodynamic coordination of single cells provides a powerful means to handle and manipulate individual cells within one device.
RESUMEN
DNA microarrays are an important tool with a variety of applications in gene expression studies, genotyping, pharmacogenomics, pathogen classification, drug discovery, sequencing and molecular diagnostics. They are having a strong impact in medical diagnostics for cancer, toxicology and infectious disease applications. A series of papers have been published describing DNA biochips as alternative to conventional microarray platforms to facilitate and ameliorate the signal readout. In this review, we will consider the different methods proposed for biochip construction, focusing on electrochemical detection of DNA. We also introduce a novel single-stranded DNA platform performing high-throughput SNP detection and gene expression profiling.
RESUMEN
Capture-SELEX is an effective molecular strategy enabling the discovery of structure-switching aptamers, which might find useful application in molecular detection or separation. We here provide a protocol to perform capture-SELEX for DNA aptamers binding soluble small molecules, which includes a straightforward functional validation by SPR. The SELEX strategy here described is adaptable to any water-soluble molecular target and might foster the development of DNA aptamers binding therapeutic small molecules, at the great advantage of clinical bioanalytics.
Asunto(s)
Aptámeros de Nucleótidos/química , Bibliotecas de Moléculas Pequeñas/metabolismo , Aptámeros de Nucleótidos/metabolismo , Técnica SELEX de Producción de Aptámeros/métodos , Resonancia por Plasmón de SuperficieRESUMEN
Erratum to: Chapter 13 in: Giampaolo Zuccheri (ed.), DNA Nanotechnology: Methods and Protocols, Methods in Molecular Biology, vol. 1811, https://doi.org/10.1007/978-1-4939-8582-1_13.
RESUMEN
The isothermal amplification of DNA in minimally buffered conditions allows to perform and monitor nucleic acid amplification with minimal technological and operative requirements. We show in this work how phi29 can operate multiple displacement amplification in minimally buffered conditions producing, as a readout, pH shifts attaining subunits of pH.
Asunto(s)
Fagos de Bacillus/enzimología , ADN Polimerasa Dirigida por ADN/metabolismo , Técnicas de Amplificación de Ácido Nucleico/métodos , Tampones (Química) , ADN Viral/genética , Genoma Viral , Papillomavirus Humano 16/genética , Humanos , Concentración de Iones de HidrógenoRESUMEN
The use of DNA aptamers in biosensors for the quantification of pharmaceuticals in the clinics would help to overcome the limitations of antibody-based detection for small molecules. The interest for such systems is proven by the ever-increasing number of aptamer-based solutions for analytics proposed in the literature as proof-of-concept demonstrators. Despite such diversity, these platforms often lack a comparative assessment of their performances against the current standard of practice in the clinics when using real samples. We employed an aptamer against tobramycin discovered in our laboratory to quantify through surface plasmon resonance the concentration of the antibiotic in clinical samples obtained from patients treated with tobramycin and undergoing therapeutic drug monitoring. We then compared the performances of our detection strategy against the current standard of practice. Our results show how, using adequate calibration and matrix complexity reduction, DNA aptamer-based direct assays can assess clinically relevant concentrations of small molecules in patient serum and with good correlation to current standards used in the clinics.
Asunto(s)
Aptámeros de Nucleótidos/sangre , Monitoreo de Drogas/normas , Tobramicina/sangre , Antibacterianos/sangre , Monitoreo de Drogas/métodos , Humanos , Resonancia por Plasmón de SuperficieRESUMEN
Label-free approaches to assess cell properties ideally suit the requirements of cell-based therapeutics, since they permit to characterize cells with minimal perturbation and manipulation, at the benefit of sample recovery and re-employment for treatment. For this reason, label-free techniques would find sensible application in adoptive T cell-based immunotherapy. In this work, we describe the label-free and single-cell detection of in vitro activated T lymphocytes in flow through an electrical impedance-based setup. We describe a novel platform featuring 3D free-standing microelectrodes presenting passive upstream and downstream extensions and integrated into microfluidic channels. We employ such device to measure the impedance change associated with T cell activation at electrical frequencies maximizing the difference between non-activated and activated T cells. Finally, we harness the impedance signature of unstimulated T cells to set a boundary separating activated and non-activated clones, so to characterize the selectivity and specificity of the system. In conclusion, the strategy here proposed highlights the possible employment of impedance to assess T cell activation in label-free.
Asunto(s)
Técnicas Biosensibles/métodos , Técnicas Analíticas Microfluídicas/métodos , Análisis de la Célula Individual/métodos , Linfocitos T/inmunología , Impedancia Eléctrica , Humanos , Activación de Linfocitos/inmunología , Linfocitos T/químicaRESUMEN
The signal-to-noise ratio of planar ISFET pH sensors deteriorates when reducing the area occupied by the device, thus hampering the scalability of on-chip analytical systems which detect the DNA polymerase through pH measurements. Top-down nano-sized tri-gate transistors, such as silicon nanowires, are designed for high performance solid-state circuits thanks to their superior properties of voltage-to-current transduction, which can be advantageously exploited for pH sensing. A systematic study is carried out on rectangular-shaped nanowires developed in a complementary metal-oxide-semiconductor (CMOS)-compatible technology, showing that reducing the width of the devices below a few hundreds of nanometers leads to higher charge sensitivity. Moreover, devices composed of several wires in parallel further increase the exposed surface per unit footprint area, thus maximizing the signal-to-noise ratio. This technology allows a sub milli-pH unit resolution with a sensor footprint of about 1 µm², exceeding the performance of previously reported studies on silicon nanowires by two orders of magnitude.
Asunto(s)
Técnicas Biosensibles/instrumentación , Nanocables/química , Silicio/química , Concentración de Iones de Hidrógeno , Relación Señal-Ruido , Transistores ElectrónicosRESUMEN
To address limitations in the production of DNA aptamers against small molecules, we introduce a DNA-based capture-SELEX (systematic evolution of ligands by exponential enrichment) protocol with long and continuous randomized library for more flexibility, coupled with in-stream direct-specificity monitoring via SPR and high throughput sequencing (HTS). Applying this capture-SELEX on tobramycin shows that target-specificity arises at cycle number 8, which is confirmed by sequence convergence in HTS analysis. Interestingly, HTS also shows that the most enriched sequences are already visible after only two capture-SELEX cycles. The best aptamers displayed K(D) of approximately 200 nM, similar to RNA and DNA-based aptamers previously selected for tobramycin. The lowest concentration of tobramycin detected on label-free SPR experiments with the selected aptamers is 20-fold smaller than the clinical range limit, demonstrating suitability for small-drug biosensing.
Asunto(s)
Aptámeros de Nucleótidos/química , ADN/química , Ensayos Analíticos de Alto Rendimiento , Técnica SELEX de Producción de Aptámeros , Resonancia por Plasmón de Superficie , Ligandos , Datos de Secuencia Molecular , Alineación de SecuenciaRESUMEN
A more specific and intense signal is desirable for most kinds of biosensors for biomedical or environmental applications, and it is especially so for label-free biosensors. In this paper, we show that hybridization chain reaction (HCR) can be exploited for the easily detectable accumulation of nucleic acids on metal surfaces as an event triggered by specific recognition between a probe and a target nucleic acid. We show that this process could be exploited to increase the sensitivity in the detection of nucleic acids derived from a pathogenic microorganism. This strategy can be straightforwardly implemented on SPR biosensors (commercial or custom-built) or on label-free electrochemical biosensors. Together with signal amplification, HCR can serve as a confirmation of the specificity of target recognition, as it involves the specific matching with a separate base sequence in the target nucleic acid. Furthermore, the kinetics of the target binding and the HCR can be easily distinguished from each other, providing an additional means of confirmation of the specific recognition.
Asunto(s)
ADN/análisis , Técnicas Electroquímicas/instrumentación , Hibridación de Ácido Nucleico , Resonancia por Plasmón de Superficie/instrumentación , Diseño de Equipo , Límite de Detección , Metales/química , Propiedades de SuperficieRESUMEN
This paper presents a novel sensor front-end circuit that addresses the issues of 1/f noise and distortion in a unique way by using canceling techniques. The proposed front-end is a fully differential transimpedance amplifier (TIA) targeted for current mode electrochemical biosensing applications. In this paper, we discuss the architecture of this canceling based front-end and the optimization methods followed for achieving low noise, low distortion performance at minimum current consumption are presented. To validate the employed canceling based front-end, it has been realized in a 0.18 µm CMOS process and the characterization results are presented. The front-end has also been tested as part of a complete wireless sensing system and the cyclic voltammetry (CV) test results from electrochemical sensors are provided. Overall current consumption in the front-end is 50 µA while operating on a 1.8 V supply.