Carbon Nanotubes Hybrid Hydrogels for Environmental Remediation: Evaluation of Adsorption Efficiency under Electric Field.

The performance of Carbon Nanotubes hybrid hydrogels for environmental remediation was investigated using Methylene Blue (MB), Rhodamine B (RD), and Bengal Rose (BR) as model contaminating dyes. An acrylate hydrogel network with incorporated CNT was synthesized by photo-polymerization without any preliminary derivatization of CNT surface. Thermodynamics, isothermal and kinetic studies showed favorable sorption processes with the application of an external 12 V electric field found to be able to influence the amount of adsorbed dyes: stronger interactions with cationic MB molecules (qexp and qexp12 of 19.72 and 33.45 mg g-1, respectively) and reduced affinity for anionic RD (qexp and qexp12 of 28.93 and 13.06 mg g-1, respectively) and neutral BR (qexp and qexp12 of 36.75 and 15.85 mg g-1, respectively) molecules were recorded. The influence of pH variation on dyes adsorption was finally highlighted by reusability studies, with the negligible variation of adsorption capacity after five repeated sorption cycles claiming for the suitability of the proposed systems as effective sorbent for wastewater treatment.

Synthesis of (Li2Fe1-yMny)SO Antiperovskites with Comprehensive Investigations of (Li2Fe0.5Mn0.5)SO as Cathode in Li-ion Batteries.

A series of solid solutions (Li2Fe1-yMny)SO with a cubic antiperovskite structure was successfully synthesized. The composition (Li2Fe0.5Mn0.5)SO was intensively studied as a cathode in Li-ion batteries showing a reversible specific capacity of 120 mA h g-1 and almost a 100% Coulombic efficiency after 50 cycles at 0.1C meaning extraction/insertion of 1 Li per formula unit during 10 h. Operando X-ray absorption spectroscopy confirmed the redox activity of both Fe2+ and Mn2+ cations during battery charge and discharge, while operando synchrotron X-ray diffraction studies revealed a reversible formation of a second isostructural phase upon Li-removal and insertion at least for the first several cycles. In comparison to (Li2Fe)SO, the presence of Mn stabilizes the crystal structure of (Li2Fe0.5Mn0.5)SO during battery operation, although post mortem TEM studies confirmed a gradual amorphization after 50 cycles. A lower specific capacity of (Li2Fe0.5Mn0.5)SO in comparison to (Li2Fe)SO is probably caused by slower kinetics, especially in the two-phase region, as confirmed by Li-diffusion coefficient measurements.

Systematic Investigations of Annealing and Functionalization of Carbon Nanotube Yarns.

Carbon nanotube yarns (CNY) are a novel carbonaceous material and have received a great deal of interest since the beginning of the 21st century. CNY are of particular interest due to their useful heat conducting, electrical conducting, and mechanical properties. The electrical conductivity of carbon nanotube yarns can also be influenced by functionalization and annealing. A systematical study of this post synthetic treatment will assist in understanding what factors influences the conductivity of these materials. In this investigation, it is shown that the electrical conductivity can be increased by a factor of 2 and 5.5 through functionalization with acids and high temperature annealing respectively. The scale of the enhancement is dependent on the reducing of intertube space in case of functionalization. For annealing, not only is the highly graphitic structure of the carbon nanotubes (CNT) important, but it is also shown to influence the residual amorphous carbon in the structure. The promising results of this study can help to utilize CNY as a replacement for common materials in the field of electrical wiring.

Filled Carbon Nanotubes as Anode Materials for Lithium-Ion Batteries.

Downsizing well-established materials to the nanoscale is a key route to novel functionalities, in particular if different functionalities are merged in hybrid nanomaterials. Hybrid carbon-based hierarchical nanostructures are particularly promising for electrochemical energy storage since they combine benefits of nanosize effects, enhanced electrical conductivity and integrity of bulk materials. We show that endohedral multiwalled carbon nanotubes (CNT) encapsulating high-capacity (here: conversion and alloying) electrode materials have a high potential for use in anode materials for lithium-ion batteries (LIB). There are two essential characteristics of filled CNT relevant for application in electrochemical energy storage: (1) rigid hollow cavities of the CNT provide upper limits for nanoparticles in their inner cavities which are both separated from the fillings of other CNT and protected against degradation. In particular, the CNT shells resist strong volume changes of encapsulates in response to electrochemical cycling, which in conventional conversion and alloying materials hinders application in energy storage devices. (2) Carbon mantles ensure electrical contact to the active material as they are unaffected by potential cracks of the encapsulate and form a stable conductive network in the electrode compound. Our studies confirm that encapsulates are electrochemically active and can achieve full theoretical reversible capacity. The results imply that encapsulating nanostructures inside CNT can provide a route to new high-performance nanocomposite anode materials for LIB.

Systematic evaluation of oligodeoxynucleotide binding and hybridization to modified multi-walled carbon nanotubes.

BACKGROUND: In addition to conventional chemotherapeutics, nucleic acid-based therapeutics like antisense oligodeoxynucleotides (AS-ODN) represent a novel approach for the treatment of bladder cancer (BCa). An efficient delivery of AS-ODN to the urothelium and then into cancer cells might be achieved by the local application of multi-walled carbon nanotubes (MWCNT). In the present study, pristine MWCNT and MWCNT functionalized with hydrophilic moieties were synthesized and then investigated regarding their physicochemical characteristics, dispersibility, biocompatibility, cellular uptake and mucoadhesive properties. Finally, their binding capacity for AS-ODN via hybridization to carrier strand oligodeoxynucleotides (CS-ODN), which were either non-covalently adsorbed or covalently bound to the different MWCNT types, was evaluated. RESULTS: Pristine MWCNT were successfully functionalized with hydrophilic moieties (MWCNT-OH, -COOH, -NH2, -SH), which led to an improved dispersibility and an enhanced dispersion stability. A viability assay revealed that MWCNT-OH, MWCNT-NH2 and MWCNT-SH were most biocompatible. All MWCNT were internalized by BCa cells, whereupon the highest uptake was observed for MWCNT-OH with 40% of the cells showing an engulfment. Furthermore, all types of MWCNT could adhere to the urothelium of explanted mouse bladders, but the amount of the covered urothelial area was with 2-7% rather low. As indicated by fluorescence measurements, it was possible to attach CS-ODN by adsorption and covalent binding to functionalized MWCNT. Adsorption of CS-ODN to pristine MWCNT, MWCNT-COOH and MWCNT-NH2 as well as covalent coupling to MWCNT-NH2 and MWCNT-SH resulted in the best binding capacity and stability. Subsequently, therapeutic AS-ODN could be hybridized to and reversibly released from the CS-ODN coupled via both strategies to the functionalized MWCNT. The release of AS-ODN at experimental conditions (80 °C, buffer) was most effective from CS-ODN adsorbed to MWCNT-OH and MWCNT-NH2 as well as from CS-ODN covalently attached to MWCNT-COOH, MWCNT-NH2 and MWCNT-SH. Furthermore, we could exemplarily demonstrate that AS-ODN could be released following hybridization to CS-ODN adsorbed to MWCNT-OH at physiological settings (37 °C, urine). CONCLUSIONS: In conclusion, functionalized MWCNT might be used as nanotransporters in antisense therapy for the local treatment of BCa.

Enhanced Mobility of Spin-Helical Dirac Fermions in Disordered 3D Topological Insulators.

The transport length ltr and the mean free path le are determined for bulk and surface states in a Bi2Se3 nanoribbon by quantum transport and transconductance measurements. We show that the anisotropic scattering of spin-helical Dirac fermions results in a strong enhancement of ltr (≈ 200 nm) and of the related mobility µtr (≈ 4000 cm2 V-1 s-1), which confirms theoretical predictions.1 Despite strong disorder, the long-range nature of the scattering potential gives a large ratio ltr/le ≈ 8, likely limited by bulk/surface coupling. This suggests that the spin-flip length lsf ≈ ltr could reach the micron size in materials with a reduced bulk doping and paves the way for building functionalized spintronic and ballistic electronic devices out of disordered 3D topological insulators.

Band Bending Inversion in Bi2Se3 Nanostructures.

Shubnikov-de Haas oscillations were studied under high magnetic field in Bi2Se3 nanostructures grown by chemical vapor transport, for different bulk carrier densities ranging from 3 × 10(19) cm(-3) to 6 × 10(17) cm(-3). The contribution of topological surface states to electrical transport can be identified and separated from bulk carriers and massive two-dimensional electron gas. Band bending is investigated, and a crossover from upward to downward band bending is found at low bulk density as a result of a competition between bulk and interface doping. These results highlight the need to control electrical doping both in the bulk and at interfaces in order to study only topological surface states.

Development of novel radiochemotherapy approaches targeting prostate tumor progenitor cells using nanohybrids.

Many tumors including prostate cancer are maintained by cancer stem cells (CSCs), which might cause tumor relapse if not eradicated during the course of treatment. Specific targeting or radiosensitization of CSCs bear promise to improve tumor curability by synergistic effects in combination with radiotherapy. Carbon nanotubes (CNTs) can be used as promising drug delivery systems for anticancer drugs such as the flavonoid catechin. Catechin is an extensively studied active ingredient of the different plants, including green tea, and it is widely recognized as co-adjuvant in cancer therapy. Here we describe the synthesis of biocompatible, catechin-loaded and gelatin-conjugated CNTs (Gel_CT_CNTs) with anticancer properties and demonstrate their potential for the eradication of prostate CSCs in combination with X-ray irradiation. Gel_CT_CNTs showed a significant enhancement of in vitro anticancer activity as compared to catechin alone. Moreover, treatment of prostate cancer cells with Gel_CT_CNT nanohybrids inhibited the tumorigenic cell population defined by a high aldehyde dehydrogenase (ALDH) activity. A combination of X-ray irradiation and treatment with Gel_CT_CNTs caused a decrease in the protein level of stem cell-related transcription factors and regulators including Nanog, Oct4 and ß-catenin and led to an increase of cancer cell radiosensitivity as demonstrated by clonogenic and spherogenic cell survival assays. Taken together, our results suggest that a combination of irradiation and Gel_CT_CNTs can be potentially used for the radiosensitization and eradication of prostate CSC populations.

Graphene oxide - gelatin nanohybrids as functional tools for enhanced Carboplatin activity in neuroblastoma cells.

PURPOSE: Preparation of Nanographene oxide (NGO) - Gelatin hybrids for efficient treatment of Neuroblastoma. METHODS: Nanohybrids were prepared via non-covalent interactions. Spectroscopic tools have been used to discriminate the chemical states of NGO prior and after gelatin coating, with UV visible spectroscopy revealing the maximum binding capacity of gelatin to NGO. Raman and X-ray photoelectron spectroscopy (XPS) demonstrated NGO and Gelatin_NGO nanohybrids through a new chemical environments produced after noncovalent interaction. Microscopic analyses, atomic force microscopy (AFM) and scanning electron microscopy (SEM) are used to estimate the thickness of samples and the lateral width in the nanoscale, respectively. RESULTS: The cell viability assay validated Gelatin_NGO nanohybrids as a useful nanocarrier for Carboplatin (CP) release and delivery, without obvious signs of toxicity. The nano-sized NGO (200 nm and 300 nm) did not enable CP to kill the cancer cells efficiently, whilst the CP loaded Gel_NGO 100 nm resulted in a synergistic activity through increasing the local concentration of CP inside the cancer cells. CONCLUSIONS: The nanohybrids provoked high stability and dispersibility in physiological media, as well as enhanced the anticancer activity of the chemotherapy agent Carboplatin (CP) in human neuroblastoma cells.

Chemosensitizing effects of carbon-based nanomaterials in cancer cells: enhanced apoptosis and inhibition of proliferation as underlying mechanisms.

Recent studies have shown that carbon nanomaterials such as carbon nanofibres (CNFs) and multi-walled carbon nanotubes (CNTs) can exert antitumor activities themselves and sensitize cancer cells to conventional chemotherapeutics such as carboplatin and cisplatin. In the present study, the chemosensitizing effect of CNFs and CNTs on cancer cells of urological origin was investigated regarding the underlying mechanisms. Prostate cancer (DU-145, PC-3) and bladder cancer (EJ28) cells were treated with carbon nanomaterials (CNFs, CNTs) and chemotherapeutics (carboplatin, cisplatin) alone as well as in combination for 24 h. Forty-eight(EJ28) or 72 h (DU-145, PC-3) after the end of treatment the effects on cellular proliferation,clonogenic survival, cell death rate and cell cycle distribution were evaluated. Depending on the cell line, simultaneous administration of chemotherapeutics and carbon nanomaterials produced an additional inhibition of cellular proliferation and clonogenic survival of up to 77% and 98%, respectively, compared to the inhibitory effects of the chemotherapeutics alone. These strongly enhanced antiproliferative effects were accompanied by an elevated cell death rate, which was predominantly mediated via apoptosis and not by necrosis. The antitumor effects of combinations with CNTs were less pronounced than those with CNFs. The enhanced effects of the combinatory treatments on cellular function were mostly of additive to partly synergistic nature. Furthermore, cell cycle analysis demonstrated an arrest at the G2/M phase mediated by a monotreatment with chemotherapeutics. Following combinatory treatments, mostly less than or nearly additive increases of cell fractions in the G2/M phase could be observed. In conclusion,the pronounced chemosensitizing effects of CNFs and CNTs were mediated by an enhanced apoptosis and inhibition of proliferation. The combination of carbon-based nanomaterials and conventional chemotherapeutics represents a novel approach in cancer therapy to bypass chemoresistance by minimizing the chemotherapeutic dosing.

Complement activation by carbon nanotubes and its influence on the phagocytosis and cytokine response by macrophages.

Carbon nanotubes (CNTs) have promised a range of applications in biomedicine. Although influenced by the dispersants used, CNTs are recognized by the innate immune system, predominantly by the classical pathway of the complement system. Here, we confirm that complement activation by the CNT used continues up to C3 and C5, indicating that the entire complement system is activated including the formation of membrane-attack complexes. Using recombinant forms of the globular regions of human C1q (gC1q) as inhibitors of CNT-mediated classical pathway activation, we show that C1q, the first recognition subcomponent of the classical pathway, binds CNTs via the gC1q domain. Complement opsonisation of CNTs significantly enhances their uptake by U937 cells, with concomitant downregulation of pro-inflammatory cytokines and up-regulation of anti-inflammatory cytokines in both U937 cells and human monocytes. We propose that CNT-mediated complement activation may cause recruitment of cellular infiltration, followed by phagocytosis without inducing a pro-inflammatory immune response. FROM THE CLINICAL EDITOR: This study highlights the importance of the complement system in response to carbon nanontube administration, suggesting that the ensuing complement activation may cause recruitment of cellular infiltration, followed by phagocytosis without inducing a pro-inflammatory immune response.

Separating Cationic and Anionic Redox Activity in the Lithium-Rich Antiperovskite (Li2Fe)SO.

Lithium-rich antiperovskites promise to be a compelling class of high-capacity cathode materials due to the existence of both cationic and anionic redox activity. Little is however known about the effect of separating the electrochemical cationic process from the anionic process and the associated implications on the electrochemical performance. In this context, we report the electrochemical properties of the illustrative example of three different (Li2Fe)SO materials with a focus on separating cationic from anionic effects. With the high-voltage anionic process, an astonishing electrochemical capacity of around 400 mAh g-1 can initially be reached. Our results however identify the anionic process as the cause of poor cycling stability and demonstrate that the fading reported in previous literature is avoided by restricting to only the cationic processes. Following this path, our (Li2Fe)SO-BM500 shows strongly improved performance as indicated by constant electrochemical cycling over 100 cycles at a capacity of around 175 mAh g-1 at 1 C. Our approach also allows us to investigate the electrochemical performance of the bare antiperovskite phase excluding extrinsic activity from initial or cycling-induced impurity phases. Our results underscore that synthesis conditions are a critical determinant of electrochemical performance in lithium-rich antiperovskites, especially with regard to the amount of electrochemical secondary phases, while the particle size has not been found to be a crucial parameter. Overall, separating and understanding the effects of the cationic from the anionic redox activity in lithium-rich antiperovskites provides the route to further improve their performance in electrochemical energy storage.

Exploring the heteroanionic 2D materials RhSeCl and RhTeCl as promising semiconductor materials.

Heteroanionic materials show promising potential as 2D semiconductors due to their tunable band gaps, making them excellent candidates for photocatalytic water splitting applications. We conducted detailed theoretical and experimental analysis of two selected materials by synthesizing crystals through chemical vapor transport and investigating the impact of anion variation on crystal structure and properties. Using powder X-ray diffraction and convergent beam electron diffraction, we elucidated the non-centrosymmetric space groups of these compounds. Thermochemical studies revealed the influence of the crystal structure on the decomposition points of both compounds. Theoretical investigations predict that both materials are indirect bandgap semiconductors, which is confirmed by electron energy loss spectroscopy and photoluminescence studies.

Facile one-pot hydrothermal synthesis of a zinc oxide/curcumin nanocomposite with enhanced toxic activity against breast cancer cells.

Zinc oxide/Curcumin (Zn(CUR)O) nanocomposites were prepared via hydrothermal treatment of Zn(NO3)2 in the presence of hexamethylenetetramine as a stabilizing agent and CUR as a bioactive element. Three ZnO : CUR ratios were investigated, namely 57 : 43 (Zn(CUR)O-A), 60 : 40 (Zn(CUR)O-B) and 81 : 19 (Zn(CUR)O-C), as assessed by thermogravimetric analyses, with an average hydrodynamic diameter of nanoaggregates in the range of 223 to 361 nm. The interaction of CUR with ZnO via hydroxyl and ketoenol groups (as proved by X-ray photoelectron spectroscopy analyses) was found to significantly modify the key properties of ZnO nanoparticles with the obtainment of a bilobed shape (as shown by scanning electron microscopy), and influenced the growth process of the composite nanoparticles as indicated by the varying particle sizes determined by powder X-ray diffraction. The efficacy of Zn(CUR)O as anticancer agents was evaluated on MCF-7 and MDA-MB-231 cancer cells, obtaining a synergistic activity with a cell viability depending on the CUR amount within the nanocomposite. Finally, the determination of reactive oxygen species production in the presence of Zn(CUR)O was used as a preliminary evaluation of the mechanism of action of the nanocomposites.

Comprehensive studies of the electronic structure of pristine and potassium doped chrysene investigated by electron energy-loss spectroscopy.

We have performed electron energy-loss spectroscopy studies in order to investigate the electronic properties of chrysene molecular solids. The valence band electronic excitation spectra and the C 1s core level excitations have been measured for pristine and potassium doped chrysene. The core level studies show a fine structure which signals the presence of four close lying conduction bands close to the Fermi level. Upon potassium doping, these bands are filled with electrons, and we have reached a doping level of about K(2.7)chrysene. Furthermore, undoped chrysene is characterized by an optical gap of about 3.3 eV and five, relatively weak, excitonic features following the excitation onset. Doping induces major changes in the electronic excitation spectra, with a new, prominent low energy excitation at about 1.3 eV. The results of a Kramers-Kronig analysis indicate that this new feature can be assigned to a charge carrier plasmon in the doped material, and momentum dependent studies reveal a negative plasmon dispersion.

Synthesis of micro- and nanosheets of CrCl3-RuCl3 solid solution by chemical vapour transport.

Solid solutions of 2D transition metal trihalides are rapidly growing in interest for the search for new 2D materials with novel properties at nanoscale dimensions. In this regard, we present a synthesis method for the Cr1-xRuxCl3 solid solution and describe the behaviour of the unit cell parameters over the whole composition range, which in general follows Vegard's law in the range of a = 5.958(6)CrCl3 … 5.9731(5)RuCl3 Å, b = 10.3328(20)CrCl3 … 10.34606(21)RuCl3 Å, c = 6.110(5)CrCl3 … 6.0385(5)RuCl3 Å and ß = 108.522(15)CrCl3 … 108.8314(14)RuCl3 °. The synthesized solid solution powder was subsequently used to deposit micro- and nanosheets directly on a substrate by applying chemical vapour transport in a temperature gradient of 575 °C → 525 °C for 2 h and 650 °C → 600 °C for 0.5 h as a bottom-up approach without the need for an external transport agent. The observed chromium chloride enrichment of the deposited crystals is predicted by thermodynamic simulation. The results allow for a nanostructure synthesis of this solid solution with a predictable composition down to about 30 nm in height and lateral size of several µm. When applying a quick consecutive delamination step, it is possible to obtain few- and monolayer structures, which could be used for further studies of downscaling effects for the CrCl3-RuCl3 solid solution. X-ray photoelectron spectroscopy, transmission electron microscopy and Raman spectroscopy were used to confirm the purity and quality of the synthesized crystals.

Curcumin and Graphene Oxide Incorporated into Alginate Hydrogels as Versatile Devices for the Local Treatment of Squamous Cell Carcinoma.

With the aim of preparing hybrid hydrogels suitable for use as patches for the local treatment of squamous cell carcinoma (SCC)-affected areas, curcumin (CUR) was loaded onto graphene oxide (GO) nanosheets, which were then blended into an alginate hydrogel that was crosslinked by means of calcium ions. The homogeneous incorporation of GO within the polymer network, which was confirmed through morphological investigations, improved the stability of the hybrid system compared to blank hydrogels. The weight loss in the 100-170 °C temperature range was reduced from 30% to 20%, and the degradation of alginate chains shifted to higher temperatures. Moreover, GO enhanced the stability in water media by counteracting the de-crosslinking process of the polymer network. Cell viability assays showed that the loading of CUR (2.5% and 5% by weight) was able to reduce the intrinsic toxicity of GO towards healthy cells, while higher amounts were ineffective due to the antioxidant/prooxidant paradox. Interestingly, the CUR-loaded systems were found to possess a strong cytotoxic effect in SCC cancer cells, and the sustained CUR release (~50% after 96 h) allowed long-term anticancer efficiency to be hypothesized.

The cross-talk between lateral sheet dimensions of pristine graphene oxide nanoparticles and Ni2+ adsorption.

This study investigated the removal of nickel(ii) ions by using two sizes of graphene oxide nanoparticles (GO - 450 nm and GO - 200 nm). The thickness and lateral sheet dimensions of GO are considered to be an important adsorbent and promising method for sufficient removal of metals like nickel, lead, copper, etc. The graphite oxide was prepared by oxidation-reduction reaction (Hummers method), and the final product was labelled as GO - 450 nm. A tip sonicator was used to reduce the size of particles to 200 nm under controlled conditions (time and power of sonication). FTIR spectroscopy shows that both sizes of GO particles contain several types of oxygen groups distributed onto the surface of GO particles. Scanning electron microscopy (SEM) and the statistical analysis confirmed the formation of these two sizes of GO particles. The GO - 200 nm performed better removal of Ni(ii) compared with GO - 450 nm, due to more surfaces being available. The adsorption capacity of GO particles increased drastically from 45 mg g-1 to 75 mg g-1 for GO - 450 nm and GO - 200 nm respectively, these values were carried out after 2 h of incubation. The kinetics of adsorption and several parameters like initial concentration at equilibrium, pH, temperature, and adsorbent dose are controlled and studied by using UV-visible spectroscopy. The results indicated a significant potential of GO - 200 nm as an adsorbent for Ni(ii) ion removal. An additional experiment was performed to estimate the surface area of GO - 450 nm and GO - 200 nm, the results show that the surface areas of GO - 450 nm and GO - 200 nm are 747.8 m2 g-1 and 1052.2 m2 g-1 respectively.

Biocompatibility of iron filled carbon nanotubes in vitro.

Due to their particular magnetic properties, nanoparticles of metallic iron are promising candidates for magnetic fluid hyperthermia when compared to the commonly used iron oxides. However, the difficulty of handling these structures in ambient conditions without oxidation hinders its practical application. In this work, iron filled carbon nanotubes non-covalently functionalized by human serum albumin are studied as potential agents for hyperthermia. Here the iron is encapsulated inside of the carbon shells and protected from reactions with its environment. Besides protecting the iron and biological environment against each other, the carbon shells can also work as an interface for conjugation with other biological molecules of interest. In order to assess if such structures could induce any toxic effect in human cell cultures, we have probed its biocompatibility on a dosage and time dependent manner by measuring metabolic activity, cell proliferation, cell cycle distribution and apoptosis. Our results have shown that those nanotubes strongly associate with cells within a short incubation period and do not pose any significant toxic effect. The magnetic properties of iron filled carbon nanotubes in biological environment, i.e., associated to cells, have been studied and a possible rotation as a function of the applied magnetic field is discussed. Our initial findings encourage the further study of these structures as potential hyperthermia agents.