Flexible Luminescent Hydrogen-bonded Organic Framework for the Separation of Benzene and Cyclohexane.

A nonplanar phenothiazine derivative with three cyano moieties (PTTCN) is designed and synthesized to achieve functional crystals for absorptive separation of benzene and cyclohexane. PTTCN can crystallize into two kinds of crystals with different fluorescence colors in different solvent systems. The molecules in two crystals are in different stereo isomeric forms of nitrogen, quasi axial (ax), and quasi equatorial (eq). The crystals with blue fluorescence in ax form may selectively adsorb benzene by a single-crystal-to-single-crystal (SCSC) transformation, but separated benzene from a benzene/cyclohexane equimolar mixture with a low purity of 79.6%. Interestingly, PTTCN molecules with eq form and benzene co-assembled to construct a hydrogen-bonded framework (X-HOF-4) with S-type solvent channels and yellow-green fluorescence, and can release benzene to form nonporous guest-free crystal under heating. Such nonporous crystals strongly favor aromatic benzene over cyclohexane and may selectively reabsorb benzene from benzene/cyclohexane equimolar mixture to recover original framework, and the purity of benzene can reach ≈96.5% after release from framework. Moreover, reversible transformation between the nonporous crystals and the guest-containing crystals allows the material to be reused.

Organic-based magnon spintronics.

Magnonics concepts utilize spin-wave quanta (magnons) for information transmission, processing and storage. To convert information carried by magnons into an electric signal promises compatibility of magnonic devices with conventional electronic devices, that is, magnon spintronics 1 . Magnons in inorganic materials have been studied widely with respect to their generation2,3, transport4,5 and detection 6 . In contrast, resonant spin waves in the room-temperature organic-based ferrimagnet vanadium tetracyanoethylene (V(TCNE) x (x ≈ 2)), were detected only recently 7 . Herein we report room-temperature coherent magnon generation, transport and detection in films and devices based on V(TCNE) x using three different techniques, which include broadband ferromagnetic resonance (FMR), Brillouin light scattering (BLS) and spin pumping into a Pt adjacent layer. V(TCNE) x can be grown as neat films on a large variety of substrates, and it exhibits extremely low Gilbert damping comparable to that in yttrium iron garnet. Our studies establish an alternative use for organic-based magnets, which, because of their synthetic versatility, may substantially enrich the field of magnon spintronics.

The Tetracyanopyridinide Dimer Dianion, σ-[TCNPy]2 (2.).

The reaction of 2,3,5,6-tetracyanopyridine (TCNPy) and Cr(C6 H6 )2 forms diamagnetic σ-[TCNPy]2 (2-) possessing a 1.572(3) Šintrafragment sp(3) -sp(3) bond. This is in contrast to the structurally related 1,2,4,5-tetracyanobenzene and 1,2,4,5-tetracyanopyrazine that form π-dimer dianions possessing long, multicenter bonds.

Characterization of Tetracyanopyridine (TCNPy)-Based Magnets: V[TCNPy]2 ⋠z (CH2 Cl2 ) (Tc =111†K) and V[TCNPy]3 ⋠z (CH2 Cl2 ) (Tc =90†K).

The reaction of 2,3,5,6-tetracyanopyridine (TCNPy) with V(CO)6 in CH2 Cl2 forms new organic-based magnets of V[TCNPy]x ⋅z (CH2 Cl2 ) (x=2, 3) composition. Analysis of the IR spectra suggests that the TCNPy is reduced and coordinated to V(II) sites through the nitriles. V[TCNPy]x order as ferrimagnets with 111 and 90 K Tc values for V[TCNPy]2 and V[TCNPy]3 , respectively. Their respective remanent magnetizations and coercive fields are 1260 and 250 emuOe mol(-1) and 9 and 6 Oe at 5 K, and they exhibit some spin-glass behavior.

Hexacyanobutadienide-Based Frustrated and Weak Ferrimagnets: M(HCBD)2·zCH2Cl2 (M = V, Fe).

Hexacyanobutadiene (HCBD) and M(CO)x (M = V, x = 6; Fe, x = 5) react in CH2Cl2 to form new organic-based magnets of M[HCBD]2·z(CH2Cl2) composition. Analysis of the IR spectrum [M = V: ν(CN) 2193 and 2116 cm(-1) (fwhh ∼400 cm(-1)); Fe: 2196 and 2145 (fwhh ∼150 cm(-1))] suggests that HCBD is reduced to the radical anion, [HCBD](•-), and the broadness suggests multiple and variable nitriles sites are coordinated to the V(II), leading to a complex mixture of magnetic couplings and behaviors that deviate from paramagnetic behavior below ∼150 K, and a frustrated magnet with Tc ≈ 9 K is observed for V[HCBD]2, the first cyanocarbon-based frustrated magnet. Fe[HCBD]2 behaves as a weak ferromagnet (canted antiferromagnet) with some spin glass behavior with a 10 K Tc.

Reactions of Phenylhydrosilanes with Pincer-Nickel Complexes: Evidence for New Si-O and Si-C Bond Formation Pathways.

This contribution presents evidence for new pathways manifested in the reactions of the phenylhydrosilanes PhnSiH4-n with the pincer complexes (POCsp(2)OP)Ni(OSiMe3), 1-OSiMe3, and (POCsp(3)OP)Ni(OSiMe3), 2-OSiMe3 (POCsp(2)OP = 2,6-(i-Pr2PO)2C6H3; POCsp(3)OP = (i-Pr2POCH2)2CH). Excess PhSiH3 or Ph2SiH2 reacted with 1-OSiMe3 to eliminate the disilyl ethers Ph(n)H(3-n)SiOSiMe3 (n = 1 or 2) and generate the nickel hydride species 1-H. Subsequent reaction of the latter with more substrate formed corresponding nickel silyl species 1-SiPhH2 or 1-SiPh2H and generated multiple Si-containing products, including disilanes and redistribution products. The reaction of 1-OSiMe3 with excess Ph2SiH2/Ph2SiD2 revealed a net KIE of ca. 1.3-1.4 at room temperature. Treating 1-OSiMe3 with excess Ph3SiH also gave 1-H and the corresponding disilyl ether Ph3SiOSiMe3, but this reaction also generated the new siloxide 1-OSiPh3 apparently via an unconventional σ-bond metathesis pathway in which the Ni center is not involved directly. The reaction of excess PhSiH3 and 2-OSiMe3 gave polysilanes of varying solubilities and molecular weights; NMR investigations showed that these polymers arise from Ni(0) species generated in situ from the reductive elimination of the highly reactive hydride intermediate, 2-H. The stoichiometric reactions of 2-OSiMe3 with Ph2SiH2 and Ph3SiH gave, respectively, siloxides 2-OSiPh2(OSiMe3) and 2-OSiPh3. Together, these results demonstrate the strong influence of pincer backbone and hydrosilane sterics on the different reactivities of 1-OSiMe3 and 2-OSiMe3 toward Ph(n)SiH(4-n) (dimerization, polymerization, and redistribution vs formation of new siloxides). The mechanisms of the reactions that lead to the observed Si-O, Si-C, and Si-Si bond formations are discussed in terms of classical and unconventional σ-bond metathesis pathways.

Small molecule activation by POC(sp3)OP-nickel complexes.

This contribution describes the reactivities of CO2 , CO, O2 , and ArNC with the pincer-type complexes [(κ(P) ,κ(C) ,κ(P') -POC sp 3OP)NiX] (POC sp 3OP=(R2 POCH2 )2 CH; R=iPr; X=OSiMe3 , NArH; Ar=2,6-iPr2 C6 H3 ). Reaction of the amido derivative with CO2 and CO leads to a simple insertion into the NiN bond to give stable carbamate and carbamoyl derivatives, respectively, the pincer ligand backbone remaining intact in both cases. In contrast, the analogous reactions with the siloxide derivative produced kinetically labile insertion products that either revert to the starting material (in the case of CO2 ) or react further to give the mixed-valent, dinickel species [(POC sp 3OP)Ni(II) {µ,κ(O) ,κ(P) ,κ(P') -OCOCH(CH2 CH2 OPR2 )2 }Ni(0) (CO)2 ]. The zero-valent center in the latter compound is ligated by a new ligand arising from transformation of the POC sp 3OP ligand backbone. The carbonylation and carboxylation of the siloxido derivative also produced minor quantities of a side-product identified as the trinickel species, [{(η(3) -allyl)Ni(µ(O) ,κ(P) -R2 PO)2 }2 Ni], arising from total dismantling of the POC sp 3OP ligand. Similar reactivities were observed with isonitrile, ArNC: reaction with the siloxido derivative resulted in a complex sequence of steps involving initial insertion, a 1,3-hydrogen shift, and an Arbuzov rearrangement to give [Ni(CNAr)4 ] and a methacrylamide based on fragments of the POC sp 3OP ligand. Oxygenation of the amido and siloxido derivatives led to the phosphinate derivative, [(POC sp 3OP)Ni(OP(O)R2 )], arising from oxidative transformation of the original ligand frame; the reaction with the Ni-NHAr derivative also gave ArHNP(O)R2 through a complex NP bond-forming reaction.

On the stability of a POCsp3OP-type pincer ligand in nickel(II) complexes.

We describe the results of a study on the stabilities of pincer-type nickel complexes relevant to catalytic hydroalkoxylation and hydroamination of olefins, C-C and C-X couplings, and fluorination of alkyl halides. Complexes [(POCsp3 OP)NiX] are stable for X=OSiMe3 , OMes (Mes=1,3,5-Me3 C6 H2), NPh2, and CC-H, whereas the O(tBu) and N(SiMe3)2 derivatives decompose readily. The phenylacetylide derivative transforms gradually into the zero-valent species cis-[{κ(P),κ(C),κ(C')-(iPr2 POCH2 CHCH2 )}Ni{η(2),κ(C),κ(C')-(iPr2 P(O)CCPh)}]. Likewise, attempts to prepare [(POCsp3 OP)NiF] gave instead the zwitterionic trinuclear species [{(η(3) -allyl)Ni}2-{µ,κ(P),κ(O)-(iPr2 PO)4 Ni}]. Characterization of these two complexes provides concrete examples of decomposition processes that can dismantle POCsp3 OP-type pincer ligands by facile C-O bond rupture. These results serve as a cautionary tale for the inherent structural fragility of pincer systems bearing phosphinite donor moieties, and provide guidelines on how to design more robust analogues.

Luminescent Porous Organic Crystals for Adsorptive Separation of Toluene and Methylcyclohexane.

A butterfly-shaped phenothiazine derivative, PTTCN, was synthesized to obtain pure organic porous crystals for the highly efficient absorptive separation of toluene (Tol) and methylcyclohexane (Mcy). Due to the presence of three polar cyano groups and nonplanar conformation, these molecules self-assembled into a hydrogen-bonded organic framework (X-HOF-5) with distinct cavities capable of accommodating Tol molecules through multiple hydrogen-bonding interactions. Upon solvent removal via heating, the activated X-HOF-5 retained its cavity structure albeit with altered stacking arrangements, accompanied by a remarkable fluorescent color change from cyan to green. X-HOF-5a can undergo a phase transformation into X-HOF-5 upon reabsorption of Tol, while exhibiting no accommodation of Mcy due to the weak intermolecular interaction between PTTCN and Mcy. This suggests that the activated HOF material prefers Tol over Mcy. Moreover, X-HOF-5a may selectively accommodate Tol in a Tol/Mcy equimolar mixture, and the purity of Tol can reach 97% after release from the framework. Additionally, it is noteworthy that the HOF material exhibits recyclability without any discernible loss in performance.

A Multistimuli Responsive, Flexible Luminescent Framework and Its Applicability in Anticounterfeiting.

A linear distyrylanthracene derivative (DDATAn) with two diaminotriazine (DAT) groups acting as the hydrogen bond (H-bond) units was designed and synthesized in order to construct flexible organic porous crystals. H-bonds between the DAT moieties helped the molecules to construct a double interpenetrated two-dimensional layer, and the stacking between layers provided a H-bonded organic framework (X-HOF-3) with one-dimensional solvent channels. When X-HOF-3 was placed in contact with methanol, the fluorescent colors of the HOF exhibited an apparent bathochromic shift. More interestingly, the methanol-activated HOF was able to rapidly adsorb water from the air, which was accompanied by a change in fluorescent color from yellow to red. Under heating, water was released from the HOF and the fluorescent color returned to yellow. Water molecules in the pores were also able to be released after an applied mechanical force disrupted the ordered structure of the HOF. Based on these stimuli-responsive properties, these HOFs can be used as advanced functional materials in anticounterfeiting applications.

Tunable Fluorescence in Two-Component Hydrogen-Bonded Organic Frameworks Based on Energy Transfer.

A dumbbell-shaped compound (TPAD) with four 2,4-diaminotriazine moieties as H-bond units and a benzene ring as a bridge group was found to form hydrogen-bonded organic frameworks (HOFs) with strong cyan fluorescence. An energy acceptor, 6,6',6″,6‴-(((benzo[c][1,2,5]thiadiazole-4,7-diylbis-(4,1-phenylene))bis(azanetriyl))tetrakis(benzene-4,1-diyl))tetrakis(1,3,5-triazine-2,4-diamine) (BTAD), with the same molecular skeleton as TPAD and a longer emission wavelength could homogeneously distribute within the framework of TPAD through occupying the locations of TPAD. As a result, two-component HOFs (TC-HOFs) were formed. The nonradiative energy transfer from TPAD as the donor to BTAD as the acceptor happens within frameworks owing to the efficient spectral overlap between the emission of TPAD and the absorption of BTAD. Moreover, the emission wavelengths and colors of TC-HOFs could be easily and continuously modulated by the content of the acceptor. The fluorescence color changed from cyan to orange when the content of BTAD gradually increased. This finding affirms that TC-HOFs with continuously adjustable composition can be constructed from two molecules with the same molecular skeleton, and highly efficient nonradiative energy transfer may happen in porous TC-HOFs. To the best of our knowledge, these TC-HOFs are the first example of TC-HOFs involved in energy transfer.

Synthesis and characterization of heterobimetallic oxo-bridged aluminum-rare earth metal complexes.

Reaction of the aluminum hydroxide LAl(OH)[C(Ph)CH(Ph)] (1, L = HC[(CMe)(NAr)](2), Ar = 2,6-iPr(2)C(6)H(3)) with Y(CH(2)SiMe(3))(3)(THF)(2) yielded the oxo-bridged heterobimetallic yttrium dialkyl complex LAl[C(Ph)CH(Ph)](µ-O)Y(CH(2)SiMe(3))(2)(THF)(2) (2). Alkane elimination reaction of 2 with 2-(imino)pyrrole [NN]H ([NN]H = 2-(ArN═CH)-5-tBuC(4)H(2)NH) afforded the yttrium monoalkyl complex LAl[C(Ph)CH(Ph)] (µ-O)Y(CH(2)SiMe(3))[NN](THF)(2) (5). Alternatively, 5 can be prepared in high yield by reaction of 1 with [NN]Y(CH(2)SiMe(3))(2)(THF)(2) (3). The analogous samarium alkyl complex LAl[C(Ph)CH(Ph)](µ-O)Sm(CH(2)SiMe(3))[NN](THF)(2) (6) was prepared similarly. Reactions of 5 and 6 with 1 equiv of iPrOH yielded the corresponding alkoxyl complexes 7 and 8, respectively. The molecular structures of 3, 6, and 8 have been determined by X-ray single-crystal analysis. Complexes 2, 3, 5, 7, and 8 have been investigated as lactide polymerization initiators. The heterobimetallic alkoxyl 8 is highly active to yield high molecular weight (M(n) = 6.91 × 10(4)) polylactides with over 91% conversion at the lactide-to-initiator molar ratio of 2000.

Guest-Regulated Luminescence and Force-Stimuli Response of a Hydrogen-Bonded Organic Framework.

Guest molecules may endow porous materials with new or enhanced properties as well as functions. Here, a porous hydrogen-bonded organic framework (HOF) constructed from a three-armed triphenylamine derivative is used to investigate how guests regulate photoluminescence and trigger force-stimuli response. It was found that guest solvents in pores might regulate HOF's luminescence. Interestingly, acetic acid as a guest endowed HOF materials with longer emission wavelengths and triggered the responses to mechanical force stimuli. Under shear force, an obvious blueshift in emission spectra was observed because of the loss of free guests and the conversion of π-stacking model. Further blue-shifted emission appeared while the bound guests were completely removed by heating. Mechanofluorochromic HOF materials could be regenerated through recrystallization and adsorbing guest. Conversely, HOFs with other guests and activated HOFs only resulted in a slight change in their fluorescence behaviors after force stimuli.

Reactivity of ytterbium(II) silylamide supported by a pyrrolyl-cyclopentadienyl ligand.

Reactivity of a divalent ytterbium amide LYbN(SiMe3)2 (1, L = Me4C5-SiMe2-NC4H4) supported by a pyrrolyl functionalized cyclopentadienyl ligand has been investigated. Reactions of 1 with the element sulfur led to the oxidation of the ytterbium to yield the disulfide-bridged ytterbium complex [LYbN(SiMe3)2]2(µ-η(2):η(2)-S2) (2) while that with AgBPh4 resulted in the oxidation of the amide ligand to yield the divalent ytterbium complex LYb(BPh4) (3) along with the formation of silver and the N-N coupling product [N(SiMe3)2]2. Reactions of 1 with phenol, phenylacetylene and aniline led to the formation of the corresponding ytterbium aryloxide [LYb(µ-OAr(1))]2 (4, Ar(1) = 2,6-tBu2-4-MeC6H2), ytterbium alkynyl complex [LYb(µ-C≡CAr(2))]2 (5, Ar(2) = 4-tBuC6H4) and ytterbium amide [(Me4C5-SiMe2-NHAr(3))Yb(µ-NHAr(3))]2 (6, Ar(3) = 2,6-iPr2C6H3), respectively. The structural analysis of the reaction products revealed that the silyl bridged pyrrolyl arm is not coordinated to the ytterbium center in compounds 2, 4 and 5. The formation of 6 involved the cleavage of the Si-Npyrrole bond, the same bond cleavage was also observed in the reaction of 1 with red phosphorus, leading to the pyrrolide bridged complex [LYb(µ-η(1):η(5)-NC4H4)]2 (7).