RESUMEN
Ascorbic acid (AA), a prominent antioxidant commonly found in human blood serum, serves as a biomarker for assessing oxidative stress levels. Therefore, precise detection of AA is crucial for swiftly diagnosing conditions arising from abnormal AA levels. Consequently, the primary aim of this research is to develop a sensitive and selective electrochemical sensor for accurate AA determination. To accomplish this aim, we used a novel nanocomposite comprised of CeO2-doped ZnO adorned on biomass-derived carbon (CeO2·ZnO@BC) as the active nanomaterial, effectively fabricating a glassy carbon electrode (GCE). Various analytical techniques were employed to scrutinize the structure and morphology features of the CeO2·ZnO@BC nanocomposite, ensuring its suitability as the sensing nanomaterial. This innovative sensor is capable of quantifying a wide range of AA concentrations, spanning from 0.5 to 1925 µM in a neutral phosphate buffer solution. It exhibits a remarkable sensitivity of 0.2267 µA µM-1cm-2 and a practical detection limit of 0.022 µM. Thanks to its exceptional sensitivity and selectivity, this sensor enables highly accurate determination of AA concentrations in real samples. Moreover, its superior reproducibility, repeatability, and stability underscore its reliability and robustness for AA quantification.
Asunto(s)
Ácido Ascórbico , Carbono , Cerio , Técnicas Electroquímicas , Nanocompuestos , Óxido de Zinc , Ácido Ascórbico/análisis , Ácido Ascórbico/química , Ácido Ascórbico/sangre , Nanocompuestos/química , Óxido de Zinc/química , Técnicas Electroquímicas/métodos , Cerio/química , Carbono/química , Humanos , Biomasa , Electrodos , Límite de DetecciónRESUMEN
Bioinspired nanochannels have emerged as a powerful tool for bioengineering and biomedical research due to their robust mechanical and controllable chemical properties. Inspired by inward-rectifier potassium (K+) channels, herein, the charged peptide assembly has been introduced into a nano-confined space for the modulation of ion current rectification (ICR). Peptide-responsive reaction-triggered sequence changes can contribute to polarity conversion of the surface charge; therefore, ICR reversal (ICRR) is generated. Compared with other responsive elements, natural charged peptides show the merit of controllable charge polarity. By electrochemically monitoring the ICRR as an output signal, one can utilize the peptide assembly-mediated ICRR to construct an ionic sensory platform. In addition, a logic gate has been established to demonstrate the availability of an ionic sensory platform for inhibitor screening. As peptide nanoassemblies may also have various structures and functions due to their diverse properties, the ionic modulation system can provide alternatives for the assay of peptide-associated biotargets with biomedical applications.
Asunto(s)
Péptidos , Transporte Iónico , IonesRESUMEN
The presence of harmful heavy metals (HMs) in the aquatic environment can damage the environment and threaten human health. Traditional remediation techniques can have secondary impacts. Thus, more sustainable approaches must be developed. Microalgae have biological properties (such as high photosynthetic efficiency and growth), which are of great advantage in the HMs removal. In this study, the effect of various concentrations (2×, 4×, and 6×) of copper (Cu), cobalt (Co), and zinc (Zn) on microalgae (C. sorokiniana GEEL-01, P. kessleri GEEL-02, D. asymmetricus GEEL-05) was investigated. The microalgal growth kinetics, HMs removal, total nitrogen (TN), total phosphor (TP), and fatty acids (FAs) compositions were analyzed. The highest growth of 1.474 OD680nm and 1.348 OD680nm was obtained at 2× and 4×, respectively, for P. kessleri GEEL-02. P. kessleri GEEL-02 showed high removal efficiency of Cu, Co, and Zn (38.92-55.44%), (36.27-68.38%), and (32.94-51.71%), respectively. Fatty acids (FAs) analysis showed that saturated FAs in C. sorokiniana GEEL-01 and P. kessleri GEEL-02 increased at 2× and 4× concentrations while decreasing at 6×. For P. kessleri GEEL-02, the properties of biodiesel including the degree of unsaturation (UD) and cetane value (CN) increased at 2×, 4×, and 6× as compared to the control. Thus, this study demonstrated that the three microalgae (particularly P. kessleri GEEL-02) are more suitable for nutrient and HMs removal coupled with biomass/biodiesel production.
Asunto(s)
Metales Pesados , Microalgas , Humanos , Ácidos Grasos/análisis , Biomasa , Biocombustibles , Nutrientes/análisis , Suplementos Dietéticos/análisisRESUMEN
Developing high-performance, safer, and affordable flexible batteries is of urgent need to power the fast-growing flexible electronics market. In this respect, zinc-ion chemistry employing aqueous-based electrolytes represents a promising combination considering the safety, cost efficiency, and both high energy and high-power output. Herein, we represent a high-performance flexible in-plane aqueous zinc-ion miniaturized battery constructed with all electrodeposited electrodes, i.e., MnO2 cathode and zinc anode with polyimide-derived interdigital patterned laser-scribed carbon (LSC) as the current collector as well as the template for electrodeposition. The LSC possesses a cross-linked network of graphitic carbon sheet, which offers large surface area over low footprint and ensures active materials loading with a robust conductive network. The LSC with high zincophilic characteristic also offers dendrite-free zinc deposition with very low Zn2+ plating stripping overpotential. Benefitting from the Zn//MnO2-rich redox chemistry, the ability of the 3D LSC network to uniformly distribute reaction sites, and the architectural merits of in-plane interdigitated electrode configuration, we report very high capacity values of â¼549 mAh/g (or â¼523 µAh/cm2) and 148 mAh/g (or 140 µAh/cm2) at 0.1 A/g (0.095 mA/cm2) and 2 A/g (1.9 mA/cm2) currents, respectively. The device was also able to maintain a high capacity of 196 mAh/g (areal capacity of 76.19 µAh/cm2) at 1 A/g (0.95 mA/cm2) current after 1350 cycles. The flexibility of the device was demonstrated in polyacryl amide (PAM) gel polymer soaked with a 2 M ZnSO4 and 0.2 M MnSO4 electrolyte, which exhibited a comparable specific capacity of â¼102-110 mAh/g in flat condition and different bending (100° or 160° bending) conditions. The device does not use any conventional current collector, separator, and conductive or polymer additives. The overall process is highly scalable and can be completed in less than a couple of hours.
RESUMEN
Cyber-threats are becoming a big concern due to the potential severe consequences of such threats is false data injection (FDI) attacks where the measures data is manipulated such that the detection is unfeasible using traditional approaches. This work focuses on detecting FDIs for phasor measurement units where compromising one unit is sufficient for launching such attacks. In the proposed approach, moving averages and correlation are used along with machine learning algorithms to detect such attacks. The proposed approach is tested and validated using the IEEE 14-bus and the IEEE 30-bus test systems. The proposed performance was sufficient for detecting the location and attack instances under different scenarios and circumstances.
RESUMEN
Metal-organic framework (MOF) thin films with flexible nature and prominent qualities have opened doors to new technological applications in different fields. Herein, we propose an electrochemical biosensor for the dual detection of Staphylococcus aureus based on the electrodeposition of Cu metal-organic framework (Cu-MOF) thin films. The promising sensing layer with features of good electronic conductivity and enhanced electron-transfer property can not only identify S. aureus through specific micrococcal nucleases in the supernatant but also detect the pathogen directly via aptamer recognition. The dual analysis design ensures the accuracy of this method for S. aureus detection in the range of 7-7 × 106 cfu/mL with the limits of detection of 1.9 and 5.2 cfu/mL. Moreover, the analytical method validation confirmed that the biosensor could efficiently work in complex biological samples, showing good selectivity and specificity and great potential for clinical diagnosis. More importantly, the current proposed strategy is simple and easy to implement without the need for extra signaling elements, which is convenient for timely clinical detection.
Asunto(s)
Técnicas Biosensibles , Estructuras Metalorgánicas , Infecciones Estafilocócicas , Humanos , Límite de Detección , Staphylococcus aureusRESUMEN
CsPbX3 perovskite nanocrystals (NCs), with excellent optical properties, have drawn considerable attention in recent years. However, they also suffer from inherent vulnerability and hydrolysis, causing the new understanding or new applications to be difficultly explored. Herein, for the first time, it is discovered that the phospholipid membrane (PM)-coated CsPbX3 NCs have intrinsic biocatalytic activity. Different from other peroxidase-like nanozymes relying on extra chromogenic reagents, the PM-CsPbX3 NCs can be used as a self-reporting nanoprobe, allowing an "add-to-answer" detection model. Notably, the fluorescence of PM-CsPbX3 NCs can be rapidly quenched by adding H2 O2 and then be restored by removing excess H2 O2 . Initiated from this unexpected observation, the PM-CsPbX3 NCs can be explored to prepare multi-color bioinks and metabolite-responsive paper analytical devices, demonstrating the great potential of CsPbX3 NCs in bioanalysis. This is the first report on the discovery of nanozyme-like property of all-inorganic CsPbX3 perovskite NCs, which adds another piece to the nanozyme puzzle and opens new avenues for in vitro disease diagnostics.
Asunto(s)
Compuestos de Calcio , Nanopartículas , Óxidos , TitanioRESUMEN
A voltammetric approach was developed for the selective and sensitive determination of hydrogen peroxide using Au plated porous silicon (PSi) nanopowder modified glassy carbon electrode (GCE). The AuNPs-PSi hybrid structure was synthesized via stain etching procedure followed by an immersion plating method to deposit AuNPs onto PSi via a simple galvanic displacement reaction with no external reducing agent to convert Au3+ to Au0. The as-fabricated AuNPs-PSi catalyst was successfully characterized by XRD, Raman, FTIR, XPS, SEM, TEM and EDS techniques. Well crystalline nature of the as-fabricated hybrid structure with AuNPs size ranging from 5 to 40 nm was observed. The specific surface area and total pore volume for both PSi and AuNPs plated PSi were evaluated using N2 adsorption isotherm technique. Cyclic voltammetry and electrochemical impedance spectroscopy techniques were applied to investigate the catalytic efficiency of AuNPs-PSi modified electrode compared to pure PSi/GCE and unmodified GCE. The sensing performance of the active material modified GCE was thoroughly examined with linear sweep voltammetry (LSV) and square wave voltammetry (SWV) techniques. The AuNPs-PSi/GCE exhibited a remarkable linear dynamic range between 2.0 and 13.81 mM (for LSV) and 0.5-6.91 mM for (SWV) with high sensitivity and low detection limit of 10.65 µAmM-1cm-2 and 14.84 µM for LSV, whereas 10.41 µAmM-1cm-2 and 15.16 µM using SWV techniques, respectively. The fabricated sensor electrode showed excellent anti-interfering ability in the presence of several common biomolecules as well as demonstrated good operational stability and reproducibility with low relative standard deviation. Moreover, the modified electrode showed acceptable recovery of H2O2 in a real sample analysis. Thus, the developed AuNPs-PSi hybrid nanomaterial represents an excellent electrocatalyst for the efficient detection and quantification of H2O2 by the electrochemical approach.
Asunto(s)
Técnicas Electroquímicas/métodos , Oro/química , Peróxido de Hidrógeno/análisis , Nanopartículas del Metal/química , Silicio/química , Carbono/química , Catálisis , Espectroscopía Dieléctrica/métodos , Electrodos , Límite de Detección , Nanoestructuras/química , Porosidad , Reproducibilidad de los ResultadosRESUMEN
The power industry is in the process of grid modernization with the introduction of phasor measurement units (PMUs), advanced metering infrastructure (AMI), and other technologies. Although these technologies enable more reliable and efficient operation, the risk of cyber threats has increased, as evidenced by the recent blackouts in Ukraine and New York. One of these threats is false data injection attacks (FDIAs). Most of the FDIA literature focuses on the vulnerability of DC estimators and AC estimators to such attacks. This paper investigates FDIAs for PMU-based state estimation, where the PMUs are comparable. Several states can be manipulated by compromising one PMU through the channels of that PMU. A Phase Locking Value (PLV) technique was developed to detect FDIAs. The proposed approach is tested on the IEEE 14-bus and the IEEE 30-bus test systems under different scenarios using a Monte Carlo simulation where the PLV demonstrated an efficient performance.
Asunto(s)
Industrias , Tecnología , Simulación por ComputadorRESUMEN
The development of a simple, sensitive, and effective method for the analysis of circulating tumor cells (CTCs) is essential for cancer diagnosis and metastasis prediction. In this work, we have proposed an enzyme-free electrochemical method for specific capture, sensitive quantification, and efficient release of CTCs. To achieve this, the specific interaction between CTCs and the corresponding aptamer designed to be located in the identification probe (IP) will unfold the hairpin structure of IP. Consequently, IP will initiate a hybridization reaction to produce a duplex, which will further trigger the hybridization chain reaction (HCR) process to form a composite product of CTCs and double-stranded DNA polymers. Therefore, a significantly amplified signal readout can be obtained. Moreover, the composite product can be brought to the electrode surface by tetrahedral DNA nanostructures to achieve the purpose of capturing and quantifying CTCs. More significantly, these captured CTCs can be controlled released without compromising cell viability via a simple strand displacement reaction. Taking the breast cancer cell MCF-7 as a representative, the newly developed approach led to an ultralow detection limit of 3 cells mL-1, which is superior to several studies previously reported. The current method has also been demonstrated to analyze CTCs in human whole blood and hence revealed a great potential in the future.
Asunto(s)
Células Neoplásicas Circulantes/patología , Células Cultivadas , ADN/química , Electrodos , Células HEK293 , Humanos , Células MCF-7 , Microscopía Fluorescente , Nanoestructuras/química , Propiedades de SuperficieRESUMEN
An electrochemical nitrite sensor probe is introduced herein using a modified flat glassy carbon electrode (GCE) and SrTiO3 material doped with spherical-shaped gold nanoparticles (Au-NPs) and polypyrrole carbon (PPyC) at a pH of 7.0 in a phosphate buffer solution. The nanocomposites (NCs) containing Au-NPs, PPyC, and SrTiO3 were synthesized by ultrasonication, and their properties were thoroughly characterized through structural, elemental, optical, and morphological analyses with various conventional spectroscopic methods, such as field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller method. The peak currents due to nitrite oxidation were characterized in detail and analyzed using conventional cyclic voltammetry (CV) as well as differential pulse voltammetry (DPV) under ambient conditions. The sensor response increased significantly from 0.15 to 1.5 mM of nitrite ions, and the sensor was fabricated by coating a conducting agent (PEDOT:PSS) on the GCE to obtain the Au-NPs/PPyC/SrTiO3 NCs/PEDOT:PSS/GCE probe. The sensor's sensitivity was determined as 0.5 µA/µMâcm2 from the ratio of the slope of the linear detection range by considering the active surface area (0.0316 cm2) of the flat GCE. In addition, the limit of detection was determined as 20.00 ± 1.00 µM, which was found to be satisfactory. The sensor's stability, pH optimization, and reliability were also evaluated in these analyses. Overall, the sensor results were found to be satisfactory. Real environmental samples were then analyzed to evaluate the sensor's reliability through DPV, and the results showed that the proposed novel electrochemical sensor holds great promise for mitigating water contamination in the real samples with the lab-made Au-NPs/PPyC/SrTiO3 NC. Thus, this study provides valuable insights for improving sensors for broad environmental monitoring applications using the electrochemical approach.
RESUMEN
Wastewater treatment plants (WWTPs) usually contain microplastics (MPs) due to daily influents of domestic and municipal wastewater. Thus, the WWTPs act as a point source of MPs distribution in the environment due to their incapability to remove MPs completely. In this study, MPs occurrence and distribution in anaerobic sludge from WWTPs in different regions (Kaifeng "KHP", Jinan "JSP", and Lanzhou "LGP") were studied. Followed by MPs identification by microscopy and Fourier transform infrared (FTIR) spectrum. The microbial communities associated with anaerobic sludge and MPs were also explored. The results showed that MPs concentrations were 16.5, 38.5, and 17.2 particles/g of total solids (TS) and transparent MPs accounted for 49.1%, 58.5%, and 48.3% in KHP, JSP, and LGP samples, respectively. Fibers represented the most common shape of MPs in KHP (49.1%), JSP (56.0%), and LGP (69.0%). The FTIR spectroscopy indicated the predominance of polyethylene polymer in 1-5 mm MPs. The Proteobacteria, Chloroflexi, Actinobacteria, Bacteroidetes, and Planctomycetes were the abundant phyla in all anaerobic sludge. The bacterial genera in KHP and LGP were similar, in which Caldilinea (>23%), Terrimonas (>10%), and Ferruginibacter (>7%) formed the core bacterial genera. While Rhodococcus (15.3%) and Rhodoplanes (10.9%) were dominating in JSP. The archaeal genera Methanosaeta (>69%) and Methanobrevibacter (>10%) were abundant in KHP and LGP sludge. While Methanomethylovorans accounted for 90% of JSP. Acetyltransferase and hydratase were the major bacterial enzymes, while reductase was the key archaeal enzyme in all anaerobic sludge. This study provided the baseline for MPs distribution, characterization, and MPs associated microbes in WWTPs.
Asunto(s)
Chloroflexi , Microbiota , Aguas del Alcantarillado , Anaerobiosis , Microplásticos , Plásticos , Archaea , BacteroidetesRESUMEN
Appropriate material selection and proper understanding of bandgap modification are key factors for the development of efficient photocatalysts. Herein, we developed an efficient, well-organized visible light oriented photocatalyst based on g-C3N4 in association with polymeric network of chitosan (CTSN) and platinum (Pt) nanoparticles utilizing a straightforward chemical approach. Modern techniques like XRD, XPS, TEM, FESEM, UV-Vis, and FTIR spectroscopy were exploited for characterization of synthesized materials. XRD results confirmed the involvement of α-polymorphic form of CTSN in graphitic carbon nitride. XPS investigation confirmed the establishment of trio photocatalytic structure among Pt, CTSN, and g-C3N4. TEM examination showed that the synthesized g-C3N4 possesses fine fluffy sheets like structure (100 to 500 nm in size) intermingled with a dense layered framework of CTSN with good dispersion of Pt nanoparticles on g-C3N4 and CTSN composite structure. The bandgap energies for g-C3N4, CTSN/g-C3N4, and Pt@ CTSN/g-C3N4 photocatalysts were found to be 2.94, 2.73, and 2.72 eV, respectively. The photodegradation skills of each created structure have been examined on antibiotic gemifloxacin mesylate and methylene blue (MB) dye. The newly developed Pt@CTSN/g-C3N4 ternary photocatalyst was found to be efficacious for the elimination of gemifloxacin mesylate (93.3%) in 25 min and MB (95.2%) just in 18 min under visible light. Designed Pt@CTSN/g-C3N4 ternary photocatalytic framework exhibited â 2.20 times more effective than bare g-C3N4 for the destruction of antibiotic drug. This study provides a simple route towards the designing of rapid, effective visible light oriented photocatalyts for the existing environmental issues.
Asunto(s)
Quitosano , Nanopartículas , Antibacterianos/química , Gemifloxacina , Azul de Metileno/química , Platino (Metal) , Catálisis , LuzRESUMEN
The ultimate objective of this research work is to design a sensitive and selective electrochemical sensor for the efficient detection of ascorbic acid (AA), a vital antioxidant found in blood serum that may serve as a biomarker for oxidative stress. To achieve this, we utilized a novel Yb2O3.CuO@rGO nanocomposite (NC) as the active material to modify the glassy carbon working electrode (GCE). The structural properties and morphological characteristics of the Yb2O3.CuO@rGO NC were investigated using various techniques to ensure their suitability for the sensor. The resulting sensor electrode was able to detect a broad range of AA concentrations (0.5-1571 µM) in neutral phosphate buffer solution, with a high sensitivity of 0.4341 µAµM-1cm-2 and a reasonable detection limit of 0.062 µM. The sensor's great sensitivity and selectivity allowed it to accurately determine the levels of AA in human blood serum and commercial vitamin C tablets. It demonstrated high levels of reproducibility, repeatability, and stability, making it a reliable and robust sensor for the measurement of AA at low overpotential. Overall, the Yb2O3.CuO@rGO/GCE sensor showed great potential in detecting AA from real samples.
Asunto(s)
Grafito , Nanocompuestos , Humanos , Grafito/química , Ácido Ascórbico , Reproducibilidad de los Resultados , Nanocompuestos/química , Carbono/química , Electrodos , Técnicas Electroquímicas/métodosRESUMEN
Depletion of non-renewable fuel has obliged researchers to seek out sustainable and environmentally friendly alternatives. Membranes have proven to be an effective technique in biofuel production for reaction, purification, and separation, with the ability to use both porous and non-porous membranes. It is demonstrated that a membrane-based sustainable and green production can result in a high degree of process intensification, whereas the recovery and repurposing of catalysts and alcohol are anticipated to increase the process economics. Therefore, in this study sustainable biodiesel was synthesized from inedible seed oil (37 wt%) of Cordia myxa using a membrane reactor. Transesterification was catalyzed by heterogenous nano-catalyst of indium oxide prepared with leaf extract of Boerhavia diffusa. Highest biodiesel yield of 95 wt% was achieved at methanol to oil molar ratio of 7:1, catalyst load 0.8 wt%, temperature 82.5 °C and time 180 min In2O3 nanoparticles exhibited reusability up to five successive transesterification rounds. The production of methyl esters was confirmed using Fourier-transform infrared spectroscopy and Nuclear Magnetic Resonance. The predominant fatty acid methyl ester detected in the biodiesel was 5, 8-octadecenoic acid. Biodiesel fuel qualities were determined to be comparable to worldwide ASTM D-6571 and EN-14214 standards. Finally, it was concluded that membrane technology can result in a highly intensified reaction process while efficient recovery of both nano catalysts and methanol increases the economics of transesterification and lead to sustainable production.
Asunto(s)
Cordia , Nanopartículas , Aceites de Plantas/química , Metanol , Biocombustibles , Biomasa , Esterificación , Catálisis , Etanol , Ácidos Grasos/químicaRESUMEN
Commercially available QPPO/PVA based anion exchange membrane (AEM) BIII was to inquire the percentage discharge of anionic dye Eosin-B (EB) at terrain temperature from wastewater. The impact of EB initial concentration, membrane dosage, ionic strength, contact time and temperature on EB percentage removal was contemplated. The EB percentage removal was increased from 22 to 99.56% and 38.15-99.56% with contact time and membrane dosage respectively while decreased from 99.56 to 29%, 99.56 to 54.61% and 99.56 to 92.22% with enhancing initial concentration of EB, ionic strength and temperature respectively. Nonlinear isotherm models were utilized to demonstrate EB adsorption onto AEM BIII. Attained results exhibited that nonliner Freundlich isotherm model best fitted to EB adsorption onto AEM BIII. For EB adsorption onto AEM BIII, adsorption kinetics were inquired in detail by using several kinetic models but EB adsorption nicely fitted to pseudo-second-order kinetics. Similarly thermodynamic analysis was performed and results pointed to an exothermic adsorption of EB onto AEM BIII. The membrane could be reused for four concecutive cycles with loosing its efficiency.
Asunto(s)
Aguas Residuales , Contaminantes Químicos del Agua , Colorantes , Eosina Amarillenta-(YS) , Concentración de Iones de Hidrógeno , Termodinámica , Adsorción , Cinética , AnionesRESUMEN
In clinical applications, there is a lack of wound dressings that combine efficient resistance to drug-resistant bacteria with good self-healing properties. In this study, a series of adhesive self-healing conductive antibacterial hydrogel dressings based on oxidized sodium alginate-grafted dopamine/carboxymethyl chitosan/Fe3+ (OSD/CMC/Fe hydrogel)/polydopamine-encapsulated poly(thiophene-3-acetic acid) (OSD/CMC/Fe/PA hydrogel) were prepared for the repair of infected wound. The Schiff base and Fe3+ coordination bonds of the hydrogel structure are dynamic bonds that can be repaired automatically after the hydrogel network is disrupted. Macroscopically, the hydrogel exhibits self-healing properties, allowing the hydrogel dressing to adapt to complex wound surfaces. The OSD/CMC/Fe/PA hydrogel showed good conductivity and photothermal antibacterial properties under near-infrared (NIR) light irradiation. In addition, the hydrogels exhibit tunable rheological properties, suitable mechanical properties, antioxidant properties, tissue adhesion properties and hemostatic properties. Furthermore, all hydrogel dressings improved wound healing in the infected full-thickness defect skin wound repair test in mice. The wound size repaired by OSD/CMC/Fe/PA3 hydrogel + NIR was much smaller (12%) than the control group treated with Tegaderm™ film after 14 days. In conclusion, the hydrogels have high antibacterial efficiency, suitable conductivity, great self-healing properties, good biocompatibility, hemostasis and antioxidant properties, making them promising candidates for wound healing dressings for the treatment of infected skin wounds.
RESUMEN
Nanofiber-based facial masks have attracted the attention of modern cosmetic applications due to their controlled drug release, biocompatibility, and better efficiency. In this work, Azadirachta indica extract (AI) incorporated electrospun polyvinyl alcohol (PVA) nanofiber membrane was prepared to obtain a sustainable and hydrophilic facial mask. The electrospun AI incorporated PVA nanofiber membranes were characterized by scanning electron microscope, Ultraviolet-visible spectroscopy (UV-Vis) drug release, water absorption analysis, 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging, and antibacterial activity (qualitative and quantitative) at different PVA and AI concentrations. The optimized nanofiber of 376 ± 75 nm diameter was obtained at 8 wt/wt% PVA concentration and 100% AI extract. The AI nanoparticles of size range 50~250 nm in the extract were examined through a zeta sizer. The water absorption rate of ~660% and 17.24° water contact angle shows good hydrophilic nature and water absorbency of the nanofiber membrane. The UV-Vis also analyzed fast drug release of >70% in 5 min. The prepared membrane also exhibits 99.9% antibacterial activity against Staphylococcus aureus and has 79% antioxidant activity. Moreover, the membrane also had good mechanical properties (tensile strength 1.67 N, elongation 48%) and breathability (air permeability 15.24 mm/s). AI-incorporated nanofiber membrane can effectively be used for facial mask application.
RESUMEN
Exposure to hydroquinone (HQ) can cause various health hazards and negative impacts on the environment. Therefore, we developed an efficient electrochemical sensor to detect and quantify HQ based on palladium nanoparticles deposited in a porous silicon-polypyrrole-carbon black nanocomposite (Pd@PSi-PPy-C)-fabricated glassy carbon electrode. The structural and morphological characteristics of the newly fabricated Pd@PSi-PPy-C nanocomposite were investigated utilizing FESEM, TEM, EDS, XPS, XRD, and FTIR spectroscopy. The exceptionally higher sensitivity of 3.0156 µAµM-1 cm-2 and a low limit of detection (LOD) of 0.074 µM were achieved for this innovative electrochemical HQ sensor. Applying this novel modified electrode, we could detect wide-ranging HQ (1-450 µM) in neutral pH media. This newly fabricated HQ sensor showed satisfactory outcomes during the real sample investigations. During the analytical investigation, the Pd@PSi-PPy-C/GCE sensor demonstrated excellent reproducibility, repeatability, and stability. Hence, this work can be an effective method in developing a sensitive electrochemical sensor to detect harmful phenol derivatives for the green environment.
Asunto(s)
Nanopartículas del Metal , Nanocompuestos , Hidroquinonas/análisis , Hidroquinonas/química , Polímeros/química , Nanopartículas del Metal/química , Silicio , Paladio/química , Pirroles/química , Hollín , Porosidad , Reproducibilidad de los Resultados , Carbono/química , Nanocompuestos/química , Electrodos , Técnicas Electroquímicas/métodosRESUMEN
Nanoscale surface roughness has conventionally been induced by using complicated approaches; however, the homogeneity of superhydrophobic surface and hazardous pollutants continue to have existing challenges that require a solution. As a prospective solution, a novel bubbled-structured silica nanoparticle (SiO2) decorated electrospun polyurethane (PU) nanofibrous membrane (SiO2@PU-NFs) was prepared through a synchronized electrospinning and electrospraying process. The SiO2@PU-NFs nanofibrous membrane exhibited a nanoscale hierarchical surface roughness, attributed to excellent superhydrophobicity. The SiO2@PU-NFs membrane had an optimized fiber diameter of 394 ± 105 nm and was fabricated with a 25 kV applied voltage, 18% PU concentration, 20 cm spinning distance, and 6% SiO2 nanoparticles. The resulting membrane exhibited a water contact angle of 155.23°. Moreover, the developed membrane attributed excellent mechanical properties (14.22 MPa tensile modulus, 134.5% elongation, and 57.12 kPa hydrostatic pressure). The composite nanofibrous membrane also offered good breathability characteristics (with an air permeability of 70.63 mm/s and a water vapor permeability of 4167 g/m2/day). In addition, the proposed composite nanofibrous membrane showed a significant water/oil separation efficiency of 99.98, 99.97, and 99.98% against the water/xylene, water/n-hexane, and water/toluene mixers. When exposed to severe mechanical stresses and chemicals, the composite nanofibrous membrane sustained its superhydrophobic quality (WCA greater than 155.23°) up to 50 abrasion, bending, and stretching cycles. Consequently, this composite structure could be a good alternative for various functional applications.