Dually modulated photonic crystal lasers for wide-range flash illumination.

Flash light sources with a wide field of view (FOV) are indispensable in various fields such as light detection and ranging (LiDAR), optical wireless communication, and adaptive lighting. However, conventional flash light sources, which combine lasers with external optical elements, tend to suffer from high complexity, large size, and high cost. In this study, we investigate a new wide-FOV flash light source which does not require external optical elements, based on a dually modulated photonic crystal surface-emitting laser (PCSEL). First, we propose and design the concept of a photonic crystal into which information of gradually varying diffraction vectors is introduced in order to artificially broaden the divergence angle. We then experimentally demonstrate photonic crystals based on this concept. Finally, by arraying 100 such lasers with mutually different central emission angles and driving all of these lasers simultaneously, we successfully achieve optics-free, 4-W flash illumination over a FOV of 30° × 30° at a wavelength of 940 nm.

Double-lattice photonic-crystal resonators enabling high-brightness semiconductor lasers with symmetric narrow-divergence beams.

Achieving high brightness (where brightness is defined as optical power per unit area per unit solid angle) in semiconductor lasers is important for various applications, including direct-laser processing and light detection and ranging for next-generation smart production and mobility. Although the brightness of semiconductor lasers has been increased by the use of edge-emitting-type resonators, their brightness is still one order of magnitude smaller than that of gas and solid-state/fibre lasers, and they often suffer from large beam divergence with strong asymmetry and astigmatism. Here, we develop a so-called 'double-lattice photonic crystal', where we superimpose two photonic lattice groups separated by one-quarter wavelength in the x and y directions. Using this resonator, an output power of 10 W with a very narrow-divergence-angle (<0.3°) symmetric surface-emitted beam is achieved from a circular emission area of 500 µm diameter under pulsed conditions, which corresponds to a brightness of over 300 MW cm-2 sr-1. In addition, an output power up to ~7 W is obtained under continuous-wave conditions. Detailed analyses on the double-lattice structure indicate that the resonators have the potential to realize a brightness of up to 10 GW cm-2 sr-1, suggesting that compact, affordable semiconductor lasers will be able to rival existing gas and fibre/disk lasers.

Designing of a Si-MEMS device with an integrated skeletal muscle cell-based bio-actuator.

With the aim of designing a mechanical drug delivery system involving a bio-actuator, we fabricated a Micro Electro Mechanical Systems (MEMS) device that can be driven through contraction of skeletal muscle cells. The device is composed of a Si-MEMS with springs and ratchets, UV-crosslinked collagen film for cell attachment, and C2C12 muscle cells. The Si-MEMS device is 600 µm x 1000 µm in size and the width of the collagen film is 250 ~ 350 µm, which may allow the device to go through small blood vessels. To position the collagen film on the MEMS device, a thermo-sensitive polymer was used as the sacrifice-layer which was selectively removed with O2 plasma at the positions where the collagen film was glued. The C2C12 myoblasts were seeded on the collagen film, where they proliferated and formed myotubes after induction of differentiation. When C2C12 myotubes were stimulated with electric pulses, contraction of the collagen film-C2C12 myotube complex was observed. When the edge of the Si-MEMS device was observed, displacement of ~8 µm was observed, demonstrating the possibility of locomotive movement when the device is placed on a track of adequate width. Here, we propose that the C2C12-collagen film complex is a new generation actuator for MEMS devices that utilize glucose as fuel, which will be useful in environments in which glucose is abundant such as inside a blood vessel.

Dually modulated photonic crystals enabling high-power high-beam-quality two-dimensional beam scanning lasers.

Mechanical-free, high-power, high-beam-quality two-dimensional (2D) beam scanning lasers are in high demand for various applications including sensing systems for smart mobility, object recognition systems, and adaptive illuminations. Here, we propose and demonstrate the concept of dually modulated photonic crystals to realize such lasers, wherein the positions and sizes of the photonic-crystal lattice points are modulated simultaneously. We show using nano-antenna theory that this photonic nanostructure is essential to realize 2D beam scanning lasers with high output power and high beam quality. We also fabricate an on-chip, circuit-driven array of dually modulated photonic-crystal lasers with a 10 × 10 matrix configuration having 100 resolvable points. Our device enables the scanning of laser beams over a wide range of 2D directions in sequence and in parallel, and can be flexibly designed to meet application-specific demands.

Electrochemical selective detection of uric acid using a copper-modified carbon electrode.

The uric acid (UA) level in (human) serum is an important indicator of several diseases; however, its electrochemical detection is difficult because the oxidation potentials of UA and ascorbic acid (AA) are very close. In this study, we have developed a simple and efficient UA detection method using a copper-modified carbon electrode. The detection principle is based on the selective oxidation of AA by Cu(II), wherein Cu(II) reacts selectively with AA but not with UA. By performing this specific reaction on an electrode surface, we have successfully distinguished the oxidation potential of UA without AA interference.