Structures of two thermolysin-inhibitor complexes that differ by a single hydrogen bond.

The mode of binding to thermolysin of the ester analog Cbz-GlyP-(O)-Leu-Leu has been determined by x-ray crystallography and shown to be virtually identical (maximum difference 0.2 angstrom) with the corresponding peptide analog Cbz-GlyP-(NH)-Leu-Leu. The two inhibitors provide a matched pair of enzyme-inhibitor complexes that differ by 4.1 kilocalories per mole in intrinsic binding energy but are essentially identical except for the presence or absence of a specific hydrogen bond.

Structure of the actin-myosin complex and its implications for muscle contraction.

Muscle contraction consists of a cyclical interaction between myosin and actin driven by the concomitant hydrolysis of adenosine triphosphate (ATP). A model for the rigor complex of F actin and the myosin head was obtained by combining the molecular structures of the individual proteins with the low-resolution electron density maps of the complex derived by cryo-electron microscopy and image analysis. The spatial relation between the ATP binding pocket on myosin and the major contact area on actin suggests a working hypothesis for the crossbridge cycle that is consistent with previous independent structural and biochemical studies.

Three-dimensional structure of myosin subfragment-1: a molecular motor.

Directed movement is a characteristic of many living organisms and occurs as a result of the transformation of chemical energy into mechanical energy. Myosin is one of three families of molecular motors that are responsible for cellular motility. The three-dimensional structure of the head portion of myosin, or subfragment-1, which contains both the actin and nucleotide binding sites, is described. This structure of a molecular motor was determined by single crystal x-ray diffraction. The data provide a structural framework for understanding the molecular basis of motility.

The three-dimensional structure of a molecular motor.

Myosin is one of only three proteins known to convert chemical energy into mechanical work. Although the chemical, kinetic and physiological characteristics of this protein have been studied extensively, it has been difficult to define its molecular basis of movement. With the recent X-ray structural determination of the myosin head, however, it is now possible to put forward a hypothesis on how myosin might function as a molecular motor.

Carbamoyl phosphate synthetase: a tunnel runs through it.

The direct transfer of metabolites from one protein to another in a biochemical pathway or between one active site and another within a single enzyme has been described as substrate channeling. The first structural visualization of such a phenomenon was provided by the X-ray crystallographic analysis of tryptophan synthase, in which a tunnel of approximately 25 A in length was observed. The recently determined three-dimensional structure of carbamoyl phosphate synthetase sets a new long distance record in that the three active sites are separated by nearly 100 A.

Carbamoyl phosphate synthetase: a crooked path from substrates to products.

The formation of carbamoyl phosphate is catalyzed by a single enzyme using glutamine, bicarbonate and two molecules of ATP via a reaction mechanism that requires a minimum of four consecutive reactions and three unstable intermediates. The recently determined X-ray crystal structure of carbamoyl phosphate synthetase has revealed the location of three separate active sites connected by two molecular tunnels that run through the interior of the protein. It has been demonstrated that the amidotransferase domain within the small subunit of the enzyme from Escherichia coli hydrolyzes glutamine to ammonia via a thioester intermediate with Cys269. The ammonia migrates through the interior of the protein, where it reacts with carboxy phosphate to produce the carbamate intermediate. The carboxy phosphate intermediate is formed by the phosphorylation of bicarbonate by ATP at a site contained within the amino-terminal half of the large subunit. The carbamate intermediate is transported through the interior of the protein to a second site within the carboxy-terminal half of the large subunit, where it is phosphorylated by another ATP to yield the final product, carbamoyl phosphate. The entire journey from substrate to product covers a distance of nearly 100 A.

Preliminary X-ray crystallographic analysis of biotin carboxylase isolated from Escherichia coli.

Acetyl CoA carboxylase catalyzes the first committed step in the biosynthesis of long chain fatty acids. In Escherichia coli, the enzyme consists of three subunits that are isolated separately and display distinct functional properties. Here we report the crystallization and preliminary X-ray analysis of one of these components, namely biotin carboxylase. The crystals are grown by microdialysis against 10 mM potassium phosphate (pH 7.0), 1 mM EDTA, 2 mM DTT and 1 mM NaN3 at 4 degrees C. They belong to the space group P2(1)2(1)2(1) with unit cell dimensions of a = 61.9 A, b = 96.1 A and c = 180.6 A and contain one dimer per asymmetric unit. The crystals diffract to a nominal resolution of 2.2 A. From a mechanistic standpoint, biotin carboxylase is especially interesting in that it is the smallest protein within its class and is one of only two carboxylases that can utilize free biotin as a substrate.

X-ray structure determination of telokin, the C-terminal domain of myosin light chain kinase, at 2.8 A resolution.

The three-dimensional structure of telokin, an acidic protein identical to the C-terminal portion of smooth muscle myosin light chain kinase from turkey gizzard, has been determined at 2.8 A resolution and refined to a crystallographic R-factor of 19.5% for all measured X-ray data from 30 A to 2.8 A. Crystals used in the investigation belonged to the space group P3(2)21, with one molecule per asymmetric unit and unit cell dimensions of a = b = 64.4 A and c = 50.6 A. Telokin contains 154 amino acid residues, 103 of which were visible in the electron density map. The overall molecular fold of telokin consists of seven strands of antiparallel beta-pleated sheet that wrap around to form a barrel. There is also an extended tail of eight amino acid residues at the N terminus that does not participate in beta-sheet formation. The beta-barrel can be simply envisioned as two layers of beta-sheet, nearly parallel to one another, with one layer containing four and the other three beta-strands. This type of beta-barrel, as seen in telokin, was first observed for the CH2 domain of an immunoglobulin fragment Fc. Telokin is an intracellular protein and, as such, does not contain the disulphide linkage between beta-strands B and F normally observed in the immunoglobulin constant domains. It does, however, contain two cysteine amino acid residues (Cys63 and Cys115) that are situated at structurally identical positions to those forming the disulphide linkage in the immunoglobulin constant domain.

Crystallization and preliminary analysis of crystals of cytochrome c2 from Rhodopseudomonas capsulata.

Two crystal forms of the cytochrome c2 isolated from Rhodopseudomonas capsulata have been obtained. One crystal form (type I), grown from ammonium sulfate solutions at pH 7.5, belongs to the space group R32 with unit cell dimensions of a = b = 100.0 A, and c = 162.2 A in the hexagonal setting. These crystals most likely contain two molecules in the asymmetric unit. The other crystal form (type II) was obtained from polyethylene glycol 6000 solutions at pH 6.5. Type II crystals belong to the space group P3(1)21 or P3(2)21 with one molecule per asymmetric unit and unit cell dimensions of a = b = 52.4 A, and c = 87.9 A. Both crystal forms diffract to at least 1.8 A resolution and appear to be resistant to radiation damage.

Crystallization, structure determination and least-squares refinement to 1.75 A resolution of the fatty-acid-binding protein isolated from Manduca sexta L.

The molecular structure of an insect fatty-acid-binding protein isolated from Manduca sexta L. has been determined and refined to a nominal resolution of 1.75 A. Crystals used in the investigation were grown from 1.6 M-ammonium sulfate solutions buffered at pH 4.5 with 50 mM-sodium succinate, and belonged to space group P2(1) with unit cell dimensions of a = 27.5 A, b = 71.0 A, c = 28.7 A and beta = 90.8 degrees. An electron density map, phased with four heavy-atom derivatives and calculated to 2.5 A resolution, allowed for complete tracing of the 131 amino acid residue polypeptide chain. Subsequent least-squares refinement of the model reduced the R-factor from 46.0% to 17.3% using all measured X-ray data from 30.0 A to 1.75 A. Approximately 92% of the amino acid residues fall into classical secondary structural elements including ten strands of anti-parallel beta-pleated sheet, two alpha-helices, one type I turn, three type II turns, four type II' turns and one type III turn. As in other fatty-acid-binding proteins, the overall molecular architecture of the insect molecule consists of ten strands of anti-parallel beta-pleated sheet forming two layers that are nearly orthogonal to one another. A helix-turn-helix motif at the N-terminal portion of the protein flanks one side of the up-and-down beta-barrel. The functional group of the fatty acid is within hydrogen-bonding distance of Gln39, Tyr129, Arg127 and a sulfate molecule, while the aliphatic portion of the ligand is surrounded by hydrophobic amino acid residues lining the beta-barrel. The binding of the carboxylic acid portion of the ligand is very similar to that observed in P2 myelin protein and the murine adipocyte lipid-binding protein, but the positioning of the hydrocarbon tail after approximately C6 is completely different.

Three-dimensional structure of the high-potential iron-sulfur protein isolated from the purple phototrophic bacterium Rhodocyclus tenuis determined and refined at 1.5 A resolution.

The molecular structure of the high-potential iron-sulfur protein (HiPIP) isolated from the phototrophic bacterium, Rhodocyclus tenuis, has been solved and refined to a nominal resolution of 1.5 A with a crystallographic R-factor of 17.3% for all measured X-ray data from 30 A to 1.5 A. It is the smallest of the HiPIP structures studied thus far with 62 amino acid residues. Crystals used in the investigation belonged to the space group P2(1) with unit cell dimensions of a = 36.7 A, b = 52.6 A, c = 27.6 A and beta = 90.8 degrees and contained two molecules per asymmetric unit. The structure was solved by a combination of multiple isomorphous replacement with two heavy-atom derivatives, anomalous scattering from the iron-sulfur cluster, symmetry averaging and solvent flattening. The folding motif for this HiPIP is characterized by one small alpha-helix, six Type I turns, an approximate Type II turn and one Type I' turn. As in other HiPIPs, the iron-sulfur cluster is co-ordinated by four cysteinyl ligands and exhibits a cubane-like motif. These cysteinyl ligands are all located in Type I turns. The hydrogen bonding around the metal cluster in the R. tenuis protein is similar to the patterns observed in the Chromatium vinosum and Ectothiorhodospira halophila HiPIPs. Several of the amino acid residues invariant in the previously determined C. vinosum and E. halophila structures are not retained in the R. tenuis molecule. There are 13 solvent molecules structurally conserved between the two R. tenuis HiPIP molecules in the asymmetric unit, some of which are important for stabilizing surface loops. Interestingly, while it is assumed that this HiPIP functions as a monomer in solution, the two molecules in the asymmetric unit pack as a dimer and are related to each other by an approximate twofold rotation axis.

Molecular structure of cytochrome c2 isolated from Rhodobacter capsulatus determined at 2.5 A resolution.

The molecular structure of the cytochrome c2, isolated from the purple photosynthetic bacterium Rhodobacter capsulatus, has been solved to a nominal resolution of 2.5 A and refined to a crystallographic R-factor of 16.8% for all observed X-ray data. Crystals used for this investigation belong to the space group R32 with two molecules in the asymmetric unit and unit cell dimensions of a = b = 100.03 A, c = 162.10 A as expressed in the hexagonal setting. An interpretable electron density map calculated at 2.5 A resolution was obtained by the combination of multiple isomorphous replacement with four heavy atom derivatives, molecular averaging and solvent flattening. At this stage of the structural analysis the electron densities corresponding to the side-chains are well ordered except for several surface lysine, glutamate and aspartate residues. Like other c-type cytochromes, the secondary structure of the protein consists of five alpha-helices forming a basket around the heme prosthetic group with one heme edge exposed to the solvent. The overall alpha-carbon trace of the molecule is very similar to that observed for the bacterial cytochrome c2, isolated from Rhodospirillum rubrum, with the exception of a loop, delineated by amino acid residues 21 to 32, that forms a two stranded beta-sheet-like motif in the Rb. capsulatus protein. As observed in the eukaryotic cytochrome c proteins, but not in the cytochrome c2 from Rsp. rubrum, there are two evolutionarily conserved solvent molecules buried within the heme binding pocket.

Synthetic chimeras of mouse growth factor-associated glandular kallikreins. II. Growth factor binding properties.

Six chimeric constructs of the sequentially similar growth factor-associated kallikreins-epidermal growth factor binding protein (EGF-BP) and the gamma-subunit of nerve growth factor (gamma-NGF)--have been expressed, and their ability to generate complexes with epidermal growth factor (EGF) and beta-NGF, analogous to the high molecular weight forms (7S NGF and HMW-EGF) found in the mouse submaxillary gland, evaluated. The chimeras are distinguished by the interchange of three regions composing the amino, middle, and carboxyl terminal regions that encompass four surface loops possibly involved in specific growth factor interactions. Native beta-NGF (along with native alpha-NGF) formed complexes indistinguishable from naturally occurring 7S NGF, characterized by an alpha 2 beta gamma 2 structure (where beta-NGF is itself a dimer), with recombinant (r) gamma-NGF and with a chimera in which the amino terminal region from EGF-BP was substituted. Two other chimeras containing either the middle or carboxyl terminal regions of gamma-NGF showed weaker ability to form 7S complexes. Thus, all chimeras containing two segments from gamma-NGF retained at least some ability to form the 7S complex. rEGF-BP reacted weakly with EGF, but the chimera composed of the amino and middle segments of EGF-BP and the carboxyl terminal segment of gamma-NGF formed a nativelike HMW-EGF complex. None of the other chimeras appeared to bind EGF. These results identify amino acid positions within each kallikrein that participate in strong growth factor interactions and demonstrate that, outside of active site contacts, different regions of the kallikreins are involved in the binding of EGF and beta-NGF, respectively.

High-resolution X-ray structure of UDP-galactose 4-epimerase complexed with UDP-phenol.

UDP-galactose 4-epimerase from Escherichia coli catalyzes the interconversion of UDP-glucose and UDP-galactose. In recent years, the enzyme has been the subject of intensive investigation due in part to its ability to facilitate nonstereospecific hydride transfer between beta-NADH and a 4-keto hexopyranose intermediate. The first molecular model of the epimerase from E. coli was solved to 2.5 A resolution with crystals grown in the presence of a substrate analogue, UDP-phenol (Bauer AJ, Rayment I, Frey PA, Holden HM, 1992, Proteins Struct Funct Genet 12:372-381). There were concerns at the time that the inhibitor did not adequately mimic the sugar moiety of a true substrate. Here we describe the high-resolution X-ray crystal structure of the ternary complex of UDP-galactose 4-epimerase with NADH and UDP-phenol. The model was refined to 1.8 A resolution with a final overall R-factor of 18.6%. This high-resolution structural analysis demonstrates that the original concerns were unfounded and that, in fact, UDP-phenol and UDP-glucose bind similarly. The carboxamide groups of the dinucleotides, in both subunits, are displaced significantly from the planes of the nicotinamide rings by hydrogen bonding interactions with Ser 124 and Tyr 149. UDP-galactose 4-epimerase belongs to a family of enzymes known as the short-chain dehydrogenases, which contain a characteristic Tyr-Lys couple thought to be important for catalysis. The epimerase/NADH/UDP-phenol model presented here represents a well-defined ternary complex for this family of proteins and, as such, provides important information regarding the possible role of the Tyr-Lys couple in the reaction mechanism.

Mutations of surface residues in Anabaena vegetative and heterocyst ferredoxin that affect thermodynamic stability as determined by guanidine hydrochloride denaturation.

The stability properties of oxidized wild-type (wt) and site-directed mutants in surface residues of vegetative (Vfd) and heterocyst (Hfd) ferredoxins from Anabaena 7120 have been characterized by guanidine hydrochloride (Gdn-HCl) denaturation. For Vfd it was found that mutants E95K, E94Q, F65Y, F65W, and T48A are quite similar to wt in stability. E94K is somewhat less stable, whereas E94D, F65A, F65I, R42A, and R42H are substantially less stable than wt. R42H is a substitution found in all Hfds, and NMR comparison of the Anabaena 7120 Vfd and Hfd showed the latter to be much less stable on the basis of hydrogen exchange rates (Chae YK, Abildgaard F, Mooberry ES, Markley JL, 1994, Biochemistry 33:3287-3295); we also find this to be true with respect to Gdn-HCl denaturation. Strikingly, the Hfd mutant H42R is more stable than the wt Hfd by precisely the amount of stability lost in Vfd upon mutating R42 to H (2.0 kcal/mol). On the basis of comparison of the X-ray crystal structures of wt Anabaena Vfd and Hfd, the decreased stabilities of F65A and F65I can be ascribed to increased solvent exposure of interior hydrophobic groups. In the case of Vfd mutants E94K and E94D, the decreased stabilities may result from disruption of a hydrogen bond between the E94 and S47 side chains. The instability of the R42 mutants is also most probably due to decreased hydrogen bonding capabilities.(ABSTRACT TRUNCATED AT 250 WORDS)

Structure of the beta 2 homodimer of bacterial luciferase from Vibrio harveyi: X-ray analysis of a kinetic protein folding trap.

Luciferase, as isolated from Vibrio harveyi, is an alpha beta heterodimer. When allowed to fold in the absence of the alpha subunit, either in vitro or in vivo, the beta subunit of enzyme will form a kinetically stable homodimer that does not unfold even after prolonged incubation in 5 M urea at pH 7.0 and 18 degrees C. This form of the beta subunit, arising via kinetic partitioning on the folding pathway, appears to constitute a kinetically trapped alternative to the heterodimeric enzyme (Sinclair JF, Ziegler MM, Baldwin TO. 1994. Kinetic partitioning during protein folding yields multiple native states. Nature Struct Biol 1: 320-326). Here we describe the X-ray crystal structure of the beta 2 homodimer of luciferase from V. harveyi determined and refined at 1.95 A resolution. Crystals employed in the investigational belonged to the orthorhombic space group P2(1)2(1)2(1) with unit cell dimensions of a = 58.8 A, b = 62.0 A, and c = 218.2 A and contained one dimer per asymmetric unit. Like that observed in the functional luciferase alpha beta heterodimer, the major tertiary structural motif of each beta subunit consists of an (alpha/beta)8 barrel (Fisher AJ, Raushel FM, Baldwin TO, Rayment I. 1995. Three-dimensional structure of bacterial luciferase from Vibrio harveyi at 2.4 A resolution. Biochemistry 34: 6581-6586). The root-mean-square deviation of the alpha-carbon coordinates between the beta subunits of the hetero- and homodimers is 0.7 A. This high resolution X-ray analysis demonstrated that "domain" or "loop" swapping has not occurred upon formation of the beta 2 homodimer and thus the stability of the beta 2 species to denaturation cannot be explained in such simple terms. In fact, the subunit:subunit interfaces observed in both the beta 2 homodimer and alpha beta heterodimer are remarkably similar in hydrogen-bonding patterns and buried surface areas.

Trimethyllead acetate: a first-choice heavy atom derivative for protein crystallography.

The three-dimensional conformation of a protein provides a wealth of biochemical information and with the advent of cloning techniques that allow the preparation of proteins almost at will, a renewed interest has arisen in the crystallographic determination of protein structures. As in any research technique, however, there are often many difficulties encountered in an X-ray crystallographic investigation. One of these is the "phase problem." Although in recent years there has been considerable progress in the development of techniques for phase determination, including the use of molecular replacement and multiple wavelength measurements, the multiple isomorphous replacement method is still the most successful method for obtaining a three-dimensional structure. Here we report the use of trimethyllead acetate as a heavy atom compound of first choice in the preparation of an isomorphous heavy atom derivative.