RESUMEN
OBJECTIVES: Some previous studies suggest that humans do not conform to geometric similarity (isometry) in anthropometric dimensions of the upper and lower limbs. Researchers often rely on a single statistical approach to the study of scaling patterns, and it is unclear whether these methods produce similar results and are equally robust. This study used one bivariate and one multivariate method to examine how linear anthropometric dimensions scale in a sample of adult humans. MATERIALS AND METHODS: Motion capture marker data from 104 adults of varying height and mass were used to calculate anthropometric dimensions. We analyzed scaling patterns in pooled and separate sexes with two methods: (1) bivariate log-log regression and (2) multivariate principal component analysis (PCA). We calculated 95% highest density/confidence intervals for each method and defined positive/negative allometry as estimates lying outside those intervals. RESULTS: Results identified isometric scaling of the upper arm, thigh, and shoulder, positive allometry of the forearm and shank, and negative allometry of the pelvis in the pooled sample using both statistical methods. Patterns of allometry in the pooled sample were similar between methods but differed in magnitude. Sex-specific results differed in both pattern and magnitude between log-log regression and PCA. Only one measurement (shoulder width) departed from isometry in the sex-specific log-log regressions. DISCUSSION: Our findings suggest that especially in sex-specific analyses, the pattern and magnitude of allometry are sensitive to statistical methodology. When body mass was selected as the size variable, most human linear anthropometric dimensions in this sample scaled isometrically and were therefore geometrically similar within sexes.
Asunto(s)
Antropometría/métodos , Tamaño Corporal/fisiología , Adolescente , Adulto , Antropología Física , Femenino , Humanos , Modelos Lineales , Masculino , Adulto JovenRESUMEN
OBJECTIVE: To determine whether a powered ankle-foot orthosis (AFO) that provides dorsiflexor and plantar flexor assistance at the ankle can improve walking endurance of persons with multiple sclerosis (MS). DESIGN: Short-term intervention. SETTING: University research laboratory. PARTICIPANTS: Participants (N=16) with a neurologist-confirmed diagnosis of MS and daily use of a prescribed custom unilateral passive AFO. INTERVENTIONS: Three 6-minute walk tests (6MWTs), 1 per footwear condition: shoes (no AFO), prescribed passive AFO, and portable powered AFO (PPAFO). Assistive devices were worn on the impaired limb. MAIN OUTCOME MEASURES: Distance walked and metabolic cost of transport were recorded during each 6MWT and compared between footwear conditions. RESULTS: Each participant completed all three 6MWTs within the experimental design. PPAFO use resulted in a shorter 6MWT distance than did a passive AFO or shoe use. No differences were observed in metabolic cost of transport between footwear conditions. CONCLUSIONS: The current embodiment of this PPAFO did not improve endurance walking performance during the 6MWT in a sample of participants with gait impairment due to MS. Further research is required to determine whether expanded training or modified design of this powered orthosis can be effective in improving endurance walking performance in persons with gait impairment due to MS.
Asunto(s)
Ortesis del Pié , Trastornos Neurológicos de la Marcha/terapia , Esclerosis Múltiple/terapia , Zapatos , Prueba de Paso , Tobillo/fisiopatología , Diseño de Equipo , Femenino , Marcha/fisiología , Trastornos Neurológicos de la Marcha/etiología , Trastornos Neurológicos de la Marcha/fisiopatología , Humanos , Masculino , Persona de Mediana Edad , Esclerosis Múltiple/complicaciones , Esclerosis Múltiple/fisiopatologíaRESUMEN
Firefighters' self-contained breathing apparatus (SCBA) protects the respiratory system during firefighting but increases the physiological burden. Extended duration SCBA (>30 min) have increased air supply, potentially increasing the duration of firefighting work cycles. To examine the effects of SCBA configuration and work cycle (length and rest), 30 firefighters completed seven trials using different SCBA and one or two bouts of simulated firefighting following work cycles common in the United States. Heart rate, core temperature, oxygen consumption, work output and self-reported perceptions were recorded during all activities. Varying SCBA resulted in few differences in these parameters. However, during a second bout, work output significantly declined while heart rates and core temperatures were elevated relative to a single bout. Thirty seven per cent of the subjects were unable to complete the second bout in at least one of the two-bout conditions. These firefighters had lower fitness and higher body mass than those who completed all assigned tasks. Practitioner Summary: The effects of extended duration SCBA and work/rest cycles on physiological parameters and work output have not been examined. Cylinder size had minimal effects, but extended work cycles with no rest resulted in increased physiological strain and decreased work output. This effect was more pronounced in firefighters with lower fitness.
Asunto(s)
Bomberos , Esfuerzo Físico/fisiología , Dispositivos de Protección Respiratoria , Adulto , Temperatura Corporal , Diseño de Equipo , Femenino , Frecuencia Cardíaca , Humanos , Masculino , Persona de Mediana Edad , Consumo de Oxígeno , Ventilación Pulmonar , Descanso/fisiología , Análisis y Desempeño de Tareas , Sensación Térmica , Factores de Tiempo , Adulto JovenRESUMEN
Risk of slips, trips and falls in firefighters maybe influenced by the firefighter's equipment and duration of firefighting. This study examined the impact of a four self-contained breathing apparatus (SCBA) three SCBA of increasing size and a prototype design and three work cycles one bout (1B), two bouts with a five-minute break (2B) and two bouts back-to-back (BB) on gait in 30 firefighters. Five gait parameters (double support time, single support time, stride length, step width and stride velocity) were examined pre- and post-firefighting activity. The two largest SCBA resulted in longer double support times relative to the smallest SCBA. Multiple bouts of firefighting activity resulted in increased single and double support time and decreased stride length, step width and stride velocity. These results suggest that with larger SCBA or longer durations of activity, firefighters may adopt more conservative gait patterns to minimise fall risk. Practitioner Summary: The effects of four self-contained breathing apparatus (SCBA) and three work cycles on five gait parameters were examined pre- and post-firefighting activity. Both SCBA size and work cycle affected gait. The two largest SCBA resulted in longer double support times. Multiple bouts of activity resulted in more conservative gait patterns.
Asunto(s)
Fatiga/etiología , Bomberos , Marcha/fisiología , Dispositivos de Protección Respiratoria , Trabajo/fisiología , Accidentes por Caídas/prevención & control , Adulto , Análisis de Varianza , Diseño de Equipo , Fatiga/fisiopatología , Femenino , Bomberos/estadística & datos numéricos , Humanos , Masculino , Persona de Mediana Edad , Equipo de Protección Personal , Análisis y Desempeño de Tareas , Factores de Tiempo , Soporte de Peso , Carga de TrabajoRESUMEN
To better assess the energy expenditure and exertion of firefighters during simulated firefighting activities, a commercial firefighter self-contained breathing apparatus (SCBA) facepiece was modified to interface with a portable metabolic monitoring device (Cosmed K4b(2)) while still functioning as a positive pressure SCBA air supply. To validate the device, standard National Fire Protection Association 1981 SCBA function tests were conducted and 14 subjects performed variable-workload assessments using all combinations of two test devices (Cosmed K4b(2) and metabolic cart) and two masks (modified SCBA facepiece and stock manufacturer-supplied breath collection). Metabolic data collected with the Cosmed K4b(2) via the modified facepiece were found to be accurate when compared to a ParvoMedics Truemax 2400 metabolic cart (average per cent difference: 4.6%). This modified facepiece design is suitable for use in metabolic studies requiring the utilisation of an SCBA system. Furthermore, the well-established overestimation of oxygen consumption from the Cosmed K4b(2) system was replicated.
Asunto(s)
Exactitud de los Datos , Metabolismo Energético , Bomberos , Monitoreo Fisiológico/instrumentación , Consumo de Oxígeno , Respiración con Presión Positiva/instrumentación , Dispositivos de Protección Respiratoria/normas , Diseño de Equipo , Voluntarios Sanos , Humanos , Masculino , Adulto JovenRESUMEN
For decades, research to quantify the effects of firefighting activities and personal protective equipment on physiology and biomechanics has been conducted in a variety of testing environments. It is unknown if these different environments provide similar information and comparable responses. A novel Firefighting Activities Station, which simulates four common fireground tasks, is presented for use with an environmental chamber in a controlled laboratory setting. Nineteen firefighters completed three different exercise protocols following common research practices. Simulated firefighting activities conducted in an environmental chamber or live-fire structures elicited similar physiological responses (max heart rate: 190.1 vs 188.0 bpm, core temperature response: 0.047°C/min vs 0.043°C/min) and accelerometry counts. However, the response to a treadmill protocol commonly used in laboratory settings resulted in significantly lower heart rate (178.4 vs 188.0 bpm), core temperature response (0.037°C/min vs 0.043°C/min) and physical activity counts compared with firefighting activities in the burn building. Practitioner Summary: We introduce a new approach for simulating realistic firefighting activities in a controlled laboratory environment for ergonomics assessment of fire service equipment and personnel. Physiological responses to this proposed protocol more closely replicate those from live-fire activities than a traditional treadmill protocol and are simple to replicate and standardise.
Asunto(s)
Temperatura Corporal , Bomberos , Frecuencia Cardíaca , Esfuerzo Físico , Ropa de Protección , Adulto , Prueba de Esfuerzo , Femenino , Incendios , Calor , Humanos , Humedad , Masculino , Entrenamiento Simulado , Temperatura , Adulto JovenRESUMEN
OBJECTIVE: To examine intra-individual variability of kinetic and temporal-spatial parameters of wheelchair propulsion as a function of shoulder pain in manual wheelchair users (MWUs). DESIGN: Cohort. SETTING: University research laboratory. PARTICIPANTS: Adults with physical disabilities (N=26) who use a manual wheelchair for mobility full time (>80% ambulation). INTERVENTIONS: Participants propelled their own wheelchairs with force-sensing wheels at a steady-state pace on a dynamometer at 3 speeds (self-selected, 0.7m/s, 1.1m/s) for 3 minutes. Temporal-spatial and kinetic data were recorded unilaterally at the hand rim. MAIN OUTCOME MEASURES: Shoulder pain was quantified with the Wheelchair Users Shoulder Pain Index. Intra-individual mean, SD, and coefficient of variation (CV=mean/SD) with kinetic and temporal-spatial metrics were determined at the handrim. RESULTS: There were no differences in mean kinetic and temporal-spatial metrics as a function of pain group (P values >.016). However, individuals with pain displayed less relative variability (CV) in peak resultant force and push time than pain-free individuals (P<.016). CONCLUSIONS: Shoulder pain had no influence on mean kinetic and temporal-spatial propulsion variables at the handrim; however, group differences were found in relative variability. These results suggest that intra-individual variability analysis is sensitive to pain. We propose that variability analysis may offer an approach for earlier identification of MWUs at risk for developing shoulder pain.
Asunto(s)
Aceleración , Personas con Discapacidad , Dolor de Hombro/fisiopatología , Silla de Ruedas , Adolescente , Adulto , Análisis de Varianza , Estudios de Cohortes , Femenino , Humanos , Cinética , Masculino , Persona de Mediana Edad , Esfuerzo Físico/fisiología , Escala Visual Analógica , Adulto JovenRESUMEN
The goal of this study was to validate a series elastic actuator (SEA)-based robotic arm that can mimic three abnormal muscle behaviors, namely lead-pipe rigidity, cogwheel rigidity, and spasticity for medical education training purposes. Key characteristics of each muscle behavior were first modeled mathematically based on clinically-observed data across severity levels. A controller that incorporated feedback, feedforward, and disturbance observer schemes was implemented to deliver haptic target muscle resistive torques to the trainee during passive stretch assessments of the robotic arm. A series of benchtop tests across all behaviors and severity levels were conducted to validate the torque estimation accuracy of the custom SEA (RMSE: ~ 0.16 Nm) and the torque tracking performance of the controller (torque error percentage: < 2.8 %). A clinical validation study was performed with seven experienced clinicians to collect feedback on the task trainer's simulation realism via a Classification Test and a Disclosed Test. In the Classification Test, subjects were able to classify different muscle behaviors with a mean accuracy > 87 % and could further distinguish severity level within each behavior satisfactorily. In the Disclosed Test, subjects generally agreed with the simulation realism and provided suggestions on haptic behaviors for future iterations. Overall, subjects scored 4.9 out of 5 for the potential usefulness of this device as a medical education tool for students to learn spasticity and rigidity assessment.
Asunto(s)
Articulación del Codo , Codo , Humanos , Codo/fisiología , Espasticidad Muscular/diagnóstico , Extremidad Superior , Simulación por Computador , TorqueRESUMEN
Crutch walking, especially when using a swing-through gait pattern, is associated with high, repetitive joint forces, hyperextension/ulnar deviation of the wrist, and excessive palmar pressure that compresses the median nerve. To reduce these adverse effects, we designed a pneumatic sleeve orthosis that utilized a soft pneumatic actuator and secured to the crutch cuff for long-term Lofstrand crutch users. Eleven able-bodied young adult participants performed both swing-through and reciprocal crutch gait patterns with and without the custom orthosis for comparison. Wrist kinematics, crutch forces, and palmar pressures were analyzed. Significantly different wrist kinematics, crutch kinetics, and palmar pressure distribution were observed in swing-through gait trials with orthosis use (p<0.001, p=0.01, p=0.03, respectively). Reductions in peak and mean wrist extension (7%, 6%), wrist range of motion (23%), and peak and mean ulnar deviation (26%, 32%) indicate improved wrist posture. Significantly increased peak and mean crutch cuff forces suggest increased load sharing between the forearm and cuff. Reduced peak and mean palmar pressures (8%, 11%) and shifted peak palmar pressure location toward the adductor pollicis denote a redirection of pressure away from the median nerve. In reciprocal gait trials, non-significant but similar trends were observed in wrist kinematics and palmar pressure distribution, whereas a significant effect of load sharing was noticed (p=0.01). These results suggest that Lofstrand crutches modified with orthosis may improve wrist posture, reduce wrist and palmar load, redirect palmar pressure away from the median nerve, and thus may reduce or prevent the onset of wrist injuries.
RESUMEN
PURPOSE: Pressure ulcers (PUs) are prevalent among immobile bed or wheelchair-reliant individuals who experience prolonged sedentary positions. Pressure relief and frequent repositioning of body posture help to mitigate complications associated with PUs. Adherence with regular repositioning is difficult to maintain due to nursing labour shortages or constraints of in-home caregivers. Manual repositioning, transferring, and lifting of immobile patients are physically demanding tasks for caregivers. This review aimed to explore and categorize these devices, discuss the significant technical challenges that need addressing, and identify potential design opportunities. MATERIALS AND METHODS: In this review, a literature search was conducted using PubMED, Science Direct, Google Scholar and IEEE Xplore databases including studies from 1995 until Feb 2023 with keywords such as pressure ulcer, assistive device, pressure relief, repositioning, transfer, etc. Both commercial and research-level devices were included in the search. RESULTS: 142 devices or technologies were identified and classified into four main categories that were further subcategorized. Within each category, the devices were investigated in terms of their mechanical design, actuation methods, control strategies, sensing technologies, and level of autonomy. Limitations of current technologies are design complexity, lack of patient comfort, and a lack of autonomy requiring caregivers frequent intervention. CONCLUSIONS: Several devices have been developed to help with prevention and mitigation of PUs. There remain challenges that hinder the widespread accessibility and use of current technologies. Advancements in assistive technologies for pressure ulcer mitigation could lie at the intersection of robotics, sensors, perception, user-centered design, and autonomous systems.IMPLICATIONS FOR REHABILITATIONFuture advancements in assistive technologies for pressure ulcer mitigation could lie at the intersection of robotics, sensors, perception, user-centered design, and autonomous systems.Most existing technologies for prevention of pressure ulcers are focused on the mechanical advantage rather than user's needs and preferences. Future designers, engineers, and product developers must be educated to conduct user needs studies concurrently with the development of technology to design the devices based on the user's needs to ensure a balanced design outcome.
RESUMEN
OBJECTIVE: Transseptal puncture (TP) is the technique used to access the left atrium of the heart from the right atrium during cardiac catheterization procedures. Through repetition, electrophysiologists and interventional cardiologists experienced in TP develop manual skills to navigate the transseptal catheter assembly to their target on the fossa ovalis (FO). Cardiology fellows and cardiologists that are new to TP currently train on patients to develop this skill, resulting in increased risk of complications. The goal of this work was to create low-risk training opportunities for new TP operators. METHODS: We developed a Soft Active Transseptal Puncture Simulator (SATPS), designed to match the dynamics, static response, and visualization of the heart during TP. The SATPS includes three subsystems: (i) A soft robotic right atrium with pneumatic actuators mimics the dynamics of a beating heart. (ii) A fossa ovalis insert simulates cardiac tissue properties. (iii) A simulated intracardiac echocardiography environment provides live visual feedback. Subsystem performance was verified with benchtop tests. Face and content validity were evaluated by experienced clinicians. RESULTS: Subsystems accurately represented atrial volume displacement, tenting and puncture force, and FO deformation. Passive and active actuation states were deemed suitable for simulating different cardiac conditions. Participants rated the SATPS as realistic and useful for training cardiology fellows in TP. CONCLUSION: The SATPS can help improve catheterization skills of novice TP operators. SIGNIFICANCE: The SATPS could provide novice TP operators the opportunity to improve their TP skills before operating on a patient for the first time, reducing the likelihood of complications.
Asunto(s)
Ablación por Catéter , Cardiopatías , Robótica , Humanos , Atrios Cardíacos , Cateterismo Cardíaco/métodos , Punciones/métodos , Ablación por Catéter/métodosRESUMEN
OBJECTIVE: To compare kinematics, net moments, powers, ground and joint reaction forces (GRF, JRF) across the hock, stifle and hip joints in Labrador Retrievers at low risk or predisposed to cranial cruciate ligament disease (CCLD). STUDY DESIGN: Cross-sectional clinical study. ANIMALS: Clinically normal Labradors predisposed (n = 11) or at low risk for CCLD (n = 9). METHODS: Right pelvic limbs were classified as predisposed or not to CCLD using a predictive score equation based on combining tibial plateau angle (TPA) and femoral anteversion angle (FAA) measured on radiographs. Kinematic, GRF, and morphometric data were combined in an inverse dynamics approach to compute hock, stifle and hip kinematics, net moments, powers, and JRF while trotting. RESULTS: The extensor moment of the hock joint was greater in predisposed limbs compared with nonpredisposed limbs (0.37 versus 0.28 Nm/kg). The power generated around the hock and stifle joints in predisposed limbs was increased (0.69 versus 0.44 W/kg for the hock, 1.59 versus 1.05 W/kg for the stifle). Trotting velocity, stance time, vertical and craniocaudal GRF and JRF did not differ between groups. CONCLUSIONS: Extensor moment at the hock was increased in predisposed limbs compared with nonpredisposed limbs. Predisposed limbs generated more energy than nonpredisposed limbs around the hock and stifle joints.
Asunto(s)
Ligamento Cruzado Anterior/anatomía & histología , Enfermedades de los Perros/patología , Miembro Posterior/fisiología , Animales , Fenómenos Biomecánicos , Estudios Transversales , Perros , Prueba de Esfuerzo/veterinaria , Femenino , Masculino , Factores de RiesgoRESUMEN
The regions of deviation method has been proposed as a technique for identifying regions of the gait cycle where joint motion deviates from normal (Shorter et al., 2008). The original statistical analysis distinguished only peak values during stance and swing. In the current article, we extend the approach by examining deviations from normal throughout the entire gait cycle using pointwise t tests. These methods were demonstrated on hind-limb joint angles of 21 Labrador Retrievers without and with cranial cruciate ligament disease. Results were compared with peak difference analysis previously performed on these subjects. All points in the gait cycle where symmetry deviations were significantly affected by cranial cruciate ligament disease (via pointwise t tests) were defined as regions of deviation from symmetry. Discriminant function analysis was used to consider single subjects and validate that these regions were truly areas of difference between groups. Regions of deviation encompassed previously determined significant peak differences, while extending analysis to additional areas of asymmetry. Discriminant function analysis suggested that the region of deviation method is a viable approach for distinguishing motion pattern differences. This enhanced method may help researchers better understand the mechanisms behind lameness and compensation.
Asunto(s)
Interpretación Estadística de Datos , Marcha/fisiología , Miembro Posterior/fisiología , Articulaciones/fisiología , Locomoción/fisiología , Animales , Análisis Discriminante , Perros , Femenino , Masculino , Rango del Movimiento Articular , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
The medical curriculum is charged with training medical students who can possess both the technical and contextual abilities to adapt to the transformational world of medicine. This new objective would require incorporating engineering principles into the medical curriculum, which was formed by the University of Illinois as the Carle Illinois College of Medicine. As a fully integrated engineering based medical school, students partake in active learning modules that develop their quantitative, innovative, and entrepreneurship skills. An example of the active learning component of the curriculum is the "Neuroscience Engineering Challenge Lab." The purpose of this study was to explore students' perception of the lab and learn how the active-learning curriculum via the design thinking labs can be enhanced. Using a paired samples t test of pre- and post-survey results, we found that the students did not statistically gain a better understanding of the design thinking process (p = 0.052), which is expected due to the majority of students having an engineering background. Contrarily, the lab increased students' understanding of ideation tools (p = 0.003), user-centered design concepts (p = 0.004), preparing a business plan pitch (p = 0.027), and students felt better prepared for their IDEA and Capstone project (p = 0.010). Based on the results, students are becoming more confident with understanding, experience, and applying these specific tools and skills. Therefore, the medical curriculum should provide opportunities for students to develop and apply their innovation skills through active-learning activities such as a Neuroscience Engineering Challenge Lab.
RESUMEN
This study investigated the effects of using geared wheels on glenohumeral joint dynamics and shoulder muscle activity during manual wheelchair propulsion. Seven veterans with spinal cord injury propelled their wheelchairs equipped with geared wheels over a carpeted floor in low gear (1.5:1) and standard gear (1:1) conditions. Hand-rim kinetics, glenohumeral joint dynamics, and muscle activity were measured using a custom instrumented geared wheel, motion analysis, and surface electromyography. Findings indicated that the propulsion speed and stroke distance decreased significantly during the low gear condition. The peak hand-rim resultant force and propulsive moment, as well as the peak glenohumeral inferior force and flexion moment, were significantly less during the low gear condition. The peak and integrated muscle activity of the anterior deltoid and pectoralis major decreased significantly, while the normalized integrated muscle activity (muscle activity per stroke distance) was not significantly different between the two conditions. Propulsion on carpeted floor in the low gear condition was accompanied by a reduced perception of effort. The notable decrease in the peak shoulder loading and muscle activity suggests that usage of geared wheels may be beneficial for wheelchair users to enhance independent mobility in their homes and communities while decreasing their shoulder demands.
Asunto(s)
Articulación del Hombro , Traumatismos de la Médula Espinal , Silla de Ruedas , Fenómenos Biomecánicos , Humanos , Músculo Esquelético , HombroRESUMEN
BACKGROUND: An external cue can markedly improve gait initiation in people with Parkinson's disease (PD) and is often used to overcome freezing of gait (FOG). It is unknown if the effects of external cueing are comparable if the imperative stimulus is triggered by the person receiving the cue (self-triggered) or an external source. OBJECTIVE: Two experiments were conducted to compare the effects of self- versus externally triggered cueing on anticipatory postural adjustments (APAs) during gait initiation in people with PD. METHODS: In experiment 1, 10 individuals with PD and FOG initiated gait without a cue or in response to a stimulus triggered by the experimenter or by the participant. Experiment 2 compared self- versus externally triggered cueing across three groups: healthy young adults (nâ=â16), healthy older adults (nâ=â11), and a group with PD (nâ=â10). RESULTS: Experiment 1: Externally triggered cues significantly increased APA magnitudes compared to uncued stepping, but not when the same cue was self-triggered. Experiment 2: APAs were not significantly improved with a self-triggered cue compared to un-cued stepping in both the PD and healthy older adult groups, but the young adults showed a significant facilitation of APA magnitude. CONCLUSION: The effectiveness of an external cue on gait initiation in people with PD and older adults is critically dependent upon whether the source of the trigger is endogenous (self-produced) or exogenous (externally-generated). These results may explain why cueing interventions that rely upon self-triggering of the stimulus are often ineffective in people with PD.
Asunto(s)
Trastornos Neurológicos de la Marcha , Enfermedad de Parkinson , Anciano , Cognición , Señales (Psicología) , Marcha/fisiología , Trastornos Neurológicos de la Marcha/etiología , Humanos , Enfermedad de Parkinson/complicaciones , Adulto JovenRESUMEN
Geared manual wheelchair wheels, a recently developed alternative propulsion mechanism, have the potential to alleviate the high upper extremity demands required for wheelchair propulsion and help decrease the risk of secondary injuries in manual wheelchair users. The objective of this study was to investigate the effects of using geared manual wheelchairs on hand-rim biomechanics of wheelchair propulsion in individuals with spinal cord injury (SCI). Seven manual wheelchair users with SCI propelled their wheelchairs equipped with geared wheels over tile, carpet, and up a ramp in low gear (gear ratio 1.5:1) and standard gear (gear ratio 1:1) conditions. Hand-rim kinetics and stroke cycle characteristics were measured using a custom instrumented geared wheel. Using the geared wheels in the low gear condition, propulsion speed (P = 0.013), peak resultant force (P = 0.005), peak propulsive moment (P < 0.006), and peak rate of rise of the resultant force (P = 0.035) decreased significantly in comparison with the standard gear condition. The significant increase in the number of stroke cycles when normalized to distance (P = 0.004) and decrease in the normalized integrated moment (P = 0.030) indicated that although a higher number of stroke cycles are required for travelling a given distance in the low gear than the standard gear condition, the low gear condition might be less demanding for the upper extremity. These results suggest that geared wheels could be a useful technology for manual wheelchair users to independently accomplish strenuous propulsion tasks including mobility on carpeted floors and ramp ascension, while reducing the risk factors contributing to the incidence of secondary upper extremity injuries.
Asunto(s)
Traumatismos de la Médula Espinal , Accidente Cerebrovascular , Silla de Ruedas , Fenómenos Biomecánicos , Diseño de Equipo , Humanos , Extremidad SuperiorRESUMEN
Virtual reality (VR) technology offers an exciting way to emulate real-life walking conditions that may better elicit changes in emotional state. We aimed to determine whether VR technology is a feasible way to elicit changes in state anxiety during walking. Electrocardiogram data were collected for 18 older adult women while they navigated a baseline walking task, a dual walking task, and four walking VR environments. Using heart rate variability (HRV) analysis, we found that all four of the VR environments successfully elicited a significantly higher level of state anxiety as compared to the walking baseline, with 84% of participants eliciting a significantly lower HRV in each of the four VR conditions as compared to baseline walking. VR was also found to be a more reliable tool for increasing state anxiety as compared to a dual task, where only 47% of participants demonstrated a significantly lower HRV as compared to baseline walking. VR, therefore, could be promising as a tool to elicit changes in state anxiety and less limited in its ability to elicit changes as compared to a traditional dual task condition.
Asunto(s)
Realidad Virtual , Caminata , Anciano , Ansiedad , Estudios de Factibilidad , Femenino , Humanos , TecnologíaRESUMEN
OBJECTIVES: To quantify net joint moments, joint powers, and joint reaction forces (JRF) across the hock, stifle, and hip joints in Labrador Retrievers with and without cranial cruciate ligament (CCL) disease. To investigate differences in joint mechanics between normal, CCL deficient, and contralateral pelvic limbs. STUDY DESIGN: Cross-sectional clinical study. ANIMALS: Clinically normal (n=14) and CCL-deficient (n=9) Labrador Retrievers. METHODS: Each limb was analyzed separately and classified as normal, CCL-deficient or sound contralateral limb. Kinematic, ground reaction force (GRF), and morphometric data were combined in an inverse dynamic approach to compute hock, stifle and hip net moments, powers and JRF, while trotting. RESULTS: Vertical and braking GRF and JRF were significantly decreased in CCL-deficient limbs. In affected limbs, extensor moments at the hock and hip, flexor moment at the stifle and power in all 3 joints were less than normal. Kinetics also identified a greater joint moment and power of the contralateral limbs compared with normal, particularly of the stifle extensor muscles group. CONCLUSION: Lameness resulting from CCL disease affected predominantly reaction forces during the braking phase and the extension during push-off. A greater contribution of the contralateral limbs to propel the dog forward was identified. CLINICAL RELEVANCE: Reductions in joint motion, loads, and muscle contraction were interpreted as modifications adopted to reduce or avoid painful mobilization of the injured stifle joint. The increased joint moment and power of the contralateral compensating side may correlate with the lameness observed, but also with the predisposition of contralateral limbs to CCL deficiency in dogs.
Asunto(s)
Ligamento Cruzado Anterior/fisiopatología , Enfermedades de los Perros/fisiopatología , Miembro Posterior/fisiopatología , Animales , Fenómenos Biomecánicos/fisiología , Estudios Transversales , Perros , Femenino , Marcha/fisiología , Cojera Animal/fisiopatología , Masculino , Movimiento/fisiología , Rodilla de Cuadrúpedos/fisiopatología , Tarso Animal/fisiopatologíaRESUMEN
The air bottle configuration (mass and size) used with a firefighter's self-contained breathing apparatus may affect functional gait performance and slip/trip/fall risk, contributing to one of the most common and costly fire ground injuries to this population. To examine the potential effect of bottle mass and size on firefighter gait performance, four 30-min air bottle configurations were tested. To quantify biomechanical gait performance, kinetic and kinematic gait data were collected on 24 male firefighters while walking at normal and fast speeds during three conditions (no obstacle, 10 cm or 30 cm stationary obstacle). Bottle mass, obstacle height and walking speed - but not bottle size - were found to significantly impact gait parameters. Ten subjects (42%) contacted the taller obstacle while wearing heavier bottles, suggesting greater risk for tripping. Heavier bottles also resulted in larger forces by the trailing leg in both the anterior-posterior and vertical directions, suggesting greater risk for slipping. These results suggest that increased bottle weight may result in a decrease in gait performance and an increase in fall risk. STATEMENT OF RELEVANCE: Occupations, such as firefighting, often require use of a self-contained breathing apparatus that includes a pressurised air bottle. No systematic assessment has investigated how modest changes in load carriage due to bottle configuration (mass and size) might affect gait behaviour, especially when crossing obstacles. Bottle mass, but not size, was found to decrease gait performance and increase fall risk.