[Influence of paper mixing pads thickness on the compressive strength of glass ionomer cement].

OBJECTIVE: To explore the influence of the thickness of mixed cardboard on the compressive strength of glass ionomer cement and the associated factors. METHODS: Three different types of glass ionomer cements were mixed on the top of 60, 40, 20 and 1 pieces of paper (P60, P40, P20 and P1), respectively. The compressive strength of the materials was tested after solidification, and the bubble rate was calculated with the assistance of scanning electron microscope. RESULTS: (1) Compressive strength: ① ChemFil Superior glass ionomer (CF): The average compressive strength of P1 group was the highest, which was significantly different from that of P40 and P60 groups (P values were 0.041 and 0.032 respectively); ② To Fuji IX GP glass ionomer (IX): The average compressive strength of P1 group was the highest, which was statistically different from that of P40 and P60 groups (P values were 0.042 and 0.038 respectively); ③ Glaslonomer FX-Ⅱ glass ionomer cement (FX): The average compressive strength of P1 group was the highest, which was statistically different from that of P20, P40 and P60 groups (P values were 0.031, 0.040 and 0.041 respectively), but there was no statistical difference among the other groups. All the three materials showed that the compressive strength of glass ions gradually increased with the decrease of the thickness of the blended paperboard, and the two materials had a highly linear negative correlation, the correlation coefficients of which were CF-0.927, IX-0.989, FX-0.892, respectively. (2) Scanning electron microscope: P1 group had the least bubbles among the three materials. CONCLUSION: It indicates that the thickness of mixed cardboard has a negative correlation with the compressive strength of glass ions. The thicker the mixed cardboard is, the greater the elasticity is. Excessive elasticity will accelerate the mixing speed when the grinding glass ions. Studies have shown that the faster the speed of artificial mixing is, the more bubbles is produced.The thicker ther mixed cardboard is, the more bubblesn are generated by glass ionomer cement, and the higher the compressive strength is. Using one piece of paper board to mix glass ionomer cement has the least bubbles and can obtain higher compressive strength.

[Research on the establishment of standard limits for perfluorooctanoic acid and perfluorooctane sulfonate in the "Standards for Drinking Water Quality（GB5749-2022）"in China].

Perfluorinated compounds, especially Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), are widely detected in water environments in China. Considering the potential health risks of drinking water exposure routes, PFOA and PFOS have been added to the water quality reference index of the newly issued "Standards for Drinking Water Quality (GB5749-2022)", with limit values of 40 and 80 ng/L, respectively. This study analyzed and discussed the relevant technical contents for determining the limits of the hygiene standard, including the environmental existence level and exposure status of PFOA and PFOS, health effects, derivation of safety reference values, and determination of hygiene standard limits. It also proposed prospects for the future direction of formulating drinking water standards.

[Analysis of the direct economic burden of measles cases and its influencing factors in Shanghai from 2017 to 2019].

Objective: To analyze the direct economic burden caused by measles cases in Shanghai from 2017 to 2019 and its influencing factors. Methods: A total of 161 laboratory-confirmed measles cases reported from January 1, 2017, to December 31, 2019, in Shanghai were included in the study through the "Measles Surveillance Information Reporting and Management System" of the "China Disease Surveillance Information Reporting and Management System". Through telephone follow-up and consulting hospital data, the basic information of population, medical treatment situation, medical treatment costs and other information were collected, and the direct economic burden of cases was calculated, including registration fees, examination fees, hospitalization fees, medical fees and other disease treatment expenses, as well as transportation and other expenses of cases. The multiple linear regression model was used to analyze the main influencing factors of the direct economic burden. Results: The age of 161 measles cases M (Q1, Q3) was 28.21 (13.33, 37.00) years. Male cases (56.52%) were more than female cases (43.48%). The largest number of cases was≥18 years old (70.81%). The total direct economic burden of 161 measles cases was 540 851.14 yuan, and the per capita direct economic burden was 3 359.32 yuan. The direct economic burden M (Q1, Q3) was 873.00 (245.01, 4 014.79) yuan per person. The results of multiple linear regression model analysis showed that compared with other and unknown occupations, central areas and non-hospitalized cases, the direct economic burden of measles cases was higher in scattered children, childcare children, students, and cadre staff in the occupational distribution, suburban areas and hospitalized, with the coefficient of ß (95%CI) values of 0.388 (0.150-0.627), 0.297 (0.025-0.569), 0.327 (0.148-0.506) and 1.031 (0.853-1.209), respectively (all P values<0.05). Conclusion: The direct economic burden of some measles cases in Shanghai is relatively high. Occupation, area of residence and hospitalization are the main factors influencing the direct economic burden of measles cases.

[Paradoxical worsening after treatment of choroidal tuberculoma: a case report].

A young woman who complained of visual acuity decreased in the right eye for 12 days visited the Department of Ophthalmology. A solitary and occupancy lesion was seen in the posterior pole of the fundus of the patient's right eye, accompanied by intracranial and pulmonary tuberculosis. The diagnosis was choroidal tuberculoma, intracranial tuberculoma, and invasive pulmonary tuberculosis. After anti-tuberculosis treatment, the lesions of lung were better, but the lesions in the right eye and brain were paradoxical worsening. Finally, the lesion was calcification and absorption after combined glucocorticoid therapy.

[Effect of closed extension tube on preventing airway leakage during artificial airway clearance].

Objective: To explore the role of closed extension tube in preventing airway leakage during artificial airway clearance. Methods: The test lung was connected with a ventilator for mechanical ventilation. The pressure parameters were set as 16/5, 20/6, 24/7, 28/8, 32/9 and 36/10 cmH2O(1 cmH2O=0.098 kPa), respectively. The circuit was connected with an open extension tube or a closed extension tube. The ventilator was set with different pressure parameters to observe the changes of airway pressure and tidal volume during airway clearance. Results: (1) The pressure parameters were set as 16/5, 20/6, 24/7, 28/8, 32/9 and 36/10 cmH2O, and the airway pressures (in cmH2O) of circuit connected with open extension tube were (15.94±0.27)/(4.81±0.04), (20.09±0.23)/(6.05±0.16), (23.89±0.41)/(6.94±0.06), (27.90±0.22)/(7.71±0.18), (31.92±0.13)/(8.74±0.12)and(35.65±0.31)/(9.72±0.07), respectively.Under the same ventilator pressure parameters, the airway pressures (in cmH2O) of circuit connected with close extension tube were (16.36±0.06)/(4.85±0.04), (20.54±0.26)/(6.44±0.12), (24.36±0.24)/(7.01±0.33), (28.69±0.25)/(8.07±0.08), (32.97±0.33)/(8.93±0.09), (37.34±0.29)/(9.75±0.08), respectively. The airway pressure of circuit connected with open extension tube was lower than that connected with closed extension tube(P<0.05);with the increase of the pressure setting of the ventilator, the difference of the airway pressure between the two extended tubes gradually increased. When the maximum inspiratory pressure of the ventilator was set 36 cmH2O, the difference reached 1.69 cmH2O. (2) The airway pressures (in cmH2O) dropped from (15.94±0.27)/(4.81±0.04), (20.09±0.23)/(6.05±0.16), (23.89±0.41)/(6.94±0.06), (27.90±0.22)/(7.71±0.18), (31.92±0.13)/(8.74±0.12), (35.65±0.31)/(9.72±0.07) to (13.42±0.4)/(3.15±0.14), (16.81±0.6)/(4.30±0.14), (20.22±0.5)/(5.48±0.45), (23.73±1.4)/(6.25±0.22), (24.78±0.7)/(7.13±0.21), (20.83±0.4)/(6.61±0.19)when the suction port of the open extension tube was opened (P<0.05);and the tidal volume (in L) also decreased from 0.328±0.004, 0.580±0.012, 0.621±0.003, 0.626±0.003, 0.615±0.003, 0.603±0.002 to 0.272±0.008, 0.416±0.051, 0.487±0.047, 0.396±0.116, 0.507±0.022, 0.508±0.079, respectively (P<0.05). The decrease of airway pressure and tidal volume gradually increased with the increase of ventilator setting pressure. When the ventilator setting parameter was 36/10 cmH2O, the decrease of airway inspiratory pressure was (14.82±0.51) cmH2O and the maximum reduction of tidal volume was (0.164±0.021)L. (3)The airway pressure (in cmH2O) was increased to(15.70±0.23)/(4.80±0.33), (19.01±0.81)/(5.71±0.34), (22.27±0.62)/(6.85±0.44), (25.35±2.09)/(7.94±0.16), (28.38±0.46)/(8.96±0.23), (33.34±0.71)/(9.71±0.25) when the suction tube was inserted from the suction port of the open extension tube in the open state, and the tidal volume (in L) was increased to 0.340±0.016, 0.563±0.020, 0.571±0.030, 0.556±0.026, 0.514±0.021, 0.512±0.031 as well.The airway pressure and tidal volume of the ventilation circuit were higher than those in the open state, but still lower than those in the closed state. Compared with the closed state of the suction port, the maximum pressure drop and tidal volume decrease were (3.53±0.46) cmH2O and (0.101±0.011) L, respectively. (4) The pressure of the ventilator was set between 16/5 cmH2O to 36/10 cmH2O. The airway pressure (in cmH2O) was decreased from (16.26±0.04)/(4.85±0.04), (20.74±0.15)/(6.42±0.11), (25.09±0.31)/(7.10±0.13), (29.38±0.24)/(8.17±0.09), (33.80±0.16)/(9.02±0.17), (37.89±0.19)/(9.83±0.07) to(16.36±0.06)/(4.85±0.04), (20.54±0.26)/(6.44±0.12), (24.36±0.24)/(7.01±0.33), (28.69±0.25)/(8.07±0.08), (32.97±0.33)/(8.93±0.09), (37.34±0.29)/(9.75±0.08), respectively during the insertion of the suction tube from the suction port of the closed extension tube, and the tidal volume (in L) was decreased from0.361±0.005, 0.592±0.003, 0.631±0.001, 0.642±0.007, 0.633±0.007, 0.626±0.08 to 0.335±0.005, 0.588±0.008, 0.631±0.002, 0.638±0.004, 0.628±0.004, 0.618±0.005.The maximum pressure change of the ventilation circuit was (0.83±0.27) cm H2O and the maximum tidal volume change was (0.008±0.006)L. The changes of airway pressure and tidal volume were significantly lower than those of ventilation circuit connected with open extension tube under the same pressure parameters. Conclusion: The connection of closed extension tube in mechanical ventilation circuit can reduce the airway leakage during artificial airway clearance, which is worthy of clinical recommendation.

[Pay attention to the mental disorders related dry eye].

The number of patients suffering from both dry eye and mental disorders (especially anxiety and depression) has risen rapidly in ophthalmic clinics. However, the mental disorders related dry eye has not received enough attention. At present, it lacks related information of basic data, and there is no standard for the clinical diagnosis and treatment. To this end, this article aims to determine the role of mental factors in the pathogenesis of dry eye, to strengthen the relevant basic and clinical research, to standardize its clinical diagnosis and treatment, and thus to promote the prevention and treatment of the mental disorder related dry eye in China.

[Association between meibomian gland dysfunction and body mass index in Chinese adults].

Objective: To evaluate the association of meibomian gland dysfunction (MGD) and body mass index (BMI) in Chinese adults. Methods: A total of 2 419 patients were retrospectively recruited between May and October 2013 from 33 ocular surface disease clinic in China. There were 780 males (32.2%) and 1 639 females (67.8%), aged 18-89 (46±16) years. BMI value of each patient was respectively calculated, and the patients were divided into underweight, normal weight, overweight and obesity groups accordingly. Meibomian gland-related examinations were performed in right eyes. Results: The number of the patients in four groups were 196, 1 556, 567 and 100, respectively. Compared with normal weight group, the rates of moderate to severe MGD (59.1%, 71.0% vs 49.9%) in overweight group and obesity group were higher, and the differences were statistically significant (both P<0.05). The scores of change in eyelid margin, meibomian gland dropout and meibum expressibility were significantly higher in overweight group and obesity group, compared with normal weight group (all P<0.05). Additionally, after stratified by age, all the above-mentioned three scores of obese patients were significantly higher than those of non-obese patients in young adult group. Multivariate logistic regression analysis showed that moderate to severe MGD was correlated with overweight (OR=2.19, 95%CI: 1.06-4.50, P=0.033) and obesity (OR=3.70, 95%CI: 2.57-5.04, P=0.008). Conclusion: Moderate to severe MGD significantly correlates with high BMI in Chinese adults.

[Enlightment of routine vaccination under the prevention and control of COVID-19 based on the circulating event of type â ¢ vaccine-derived poliovirus in Shanghai].

Since the Global Polio Eradication Initiative was launched by the World Health Assembly in 1988, significant progress has been made in global polio prevention and control. But the occurrence of vaccine-associated paralytic poliomyelitis cases and vaccine-derived poliovirus related cases have become a major challenge during the post-polio era. While coronavirus disease 2019(COVID-19) has brought serious disease burden and economic burden to all countries in the world, prevention and control of vaccine-preventable infectious diseases such as polio should not be neglected under the background of the global common fight against COVID-19. Taking the type Ⅲ VDPV cycle event in Shanghai as an example, the paper discussed how to do a good job of routine inoculation under the prevention and control of COVID-19 to strictly prevent the outbreak of vaccine-preventable infectious diseases.

[Correlation between aspiration and long-term survival of inpatients with chronic obstructive pulmonary disease].

Objective: To retrospectively analyze the high risk factors of death in patients with chronic obstructive pulmonary disease (COPD) and to explore the influence of aspiration on the long-term survival rate of COPD patients. Methods: A retrospective analysis of clinical data of inpatients, who were admitted to the First Affiliated Hospital of Guangzhou Medical University from April 2012 to December 2013 due to COPD exacerbations and had radionuclide aspiration test, was conducted. Meanwhile, we phoned the patients' family members, whose phone numbers were recorded in the electronic patient record system, to follow up the patients' survival status, and learn the causes of death from their death records if patients died during follow-up period. Inquired the resident administration patients belonging to according to their original address to get patient's current contact information if changed. Besides, if family members of patients failed to provide death record, we should look up information concerned from the medical records room of the hospital where they died. Results: The follow-up for the last patient was performed on February 20, 2017.The time span of this study is 58 months, starting from the radionuclide aspiration test for the first patient and ending with the follow-up for the last patient. 16 of the 53 patients(16/53, 30.2%)were tested positive whose average age was slightly higher than patients without aspiration (76.0±6.8 vs 70.9±9.9), but there was no significant difference between them(P=0.064). The aspiration rates among patients over and under the age of seventy were 14/35 and 2/18 respectively, and there was a significant difference between them(P = 0.03). Compared to the aspiration-negative patients, the aspiration-positive patients had higher incidence rate of pneumonia in COPD exacerbations (11/16 vs 9/37, χ²= 9.383, P = 0.002).The major cause of death in the patients with and without aspiration were respectively severe pneumonia and pulmonary encephalopathy(P<0.05 in both cases).Among COPD patients who took radionuclide aspiration test, the median survival time of the patients with and without aspiration were about 3 and 5 years respectively. The high-risk factors influencing long-term survival of the COPD patients with aspiration included ICU-involved medical history and accompanying pneumonia. Conclusions: The incidence rate of aspiration is relatively high in COPD patients over 70 years old. Compared to COPD patients without aspiration, COPD patients with aspiration have higher incidence rate of pneumonia and shorter median survival time. ICU-involved medical history and severe pneumonia are the two high-risk factors influencing long-term survival of COPD patients with aspiration.To improve the survival time of COPD patients with aspiration, we need to attach importance to the prevention and treatment of aspiration.

[Clonal heterogeneity and its prognostic significance in acute lymphoblastic leukemia].

Objective: To explore the characteristics and clinical significance of clonal heterogeneity in patients with acute lymphoblastic leukemia(ALL). Methods: From January 2016 to June 2019, 170 newly diagnosed ALL patients were enrolled in the Department of Hematology, Henan Cancer Hospital, including 93 males and 77 females, with a median age of 17 (2-80) years. Fifty-two ALL-related genes were detected by high-throughput sequencing technique. The clonal heterogeneity of mutations was analyzed according to the variant allele frequency (VAF) and the results of flow cytometry. The prognostic value of mutations was also evaluated. Results: Gene mutations were detected in 121 (71.2%, 121/170) patients, of which 2 or more clones were detected in 18 (52.9%, 18/34) T-cell acute lymphoblastic leukemia patients, while only 23 (16.9%, 23/136) B-cell acute lymphoblastic leukemia patients were positive of multiple mutations (P<0.01).Gene mutation-related clonal heterogeneity analysis showed that 2 or more clones were frequent in patients with NOTCH1 mutations (13/19 patients) (P<0.01). Event free survival (EFS) in patients with 3 or more clones was significantly lower than other patients (χ(2)=10.330, P=0.016). Child ALL patients had similar result, that multiple clones predicted lower overall survival (OS) and EFS (OS: χ(2)=7.974, P=0.047; EFS: χ(2)=10.860, P=0.013). Conclusion: Clonal heterogeneity in ALL patients is closely related to the different origin of lymphocyte lineages and the age of onset, which may reveal the nature of the disease and predict the clinical outcome.

[The genetic characteristics of BCR-ABL-negative myeloproliferative neoplasms].

Objective: To explore the relationship between driver gene mutation (JAK2, MPL and CALR) and disease type in BCR-ABL negative myeloproliferative neoplasms (MPNs) including primary myeloid fibrosis (PMF), essential thrombocytosis (ET) and polycythemia vera (PV). Methods: A total of 32 MPN related genes were detected by high-throughput sequencing in 156 MPN patients. The relationships between disease type and patients' general performance, the characteristics of driver gene mutations, concomitant gene mutations were analyzed. Results: In the population with JAK2 V617F positive mutation, the proportion of patients over 60 years old in PMF was higher than that with ET or PV. By high-throughput sequencing, 22 concomitant gene mutations were detected in 46 patients with JAK2, MPL or CALR mutations, including 4 (8.3%) in PV, 20 (29.4%) in ET, and 22 (55.0%) in PMF. DNMT3A mutation was detected only in patients with PV, while splicing factor related genes including SF3B1, SRSF2 and U2AF1 were only accompanied by PMF. According to the variation allele frequency (VAF) value of JAK2 V617F mutation, the VAF value associated with PV was the highest (68.15%), followed by PMF (37.7%) and ET (23%). However, there were significant differences in the incidence of JAK2 V617F homozygous among 3 different diseases. In patients with JAK2 mutation, the proportion of other gene mutations in PV and ET was significantly lower than that in PMF. Conclusions: Under the condition of common driver gene mutations (JAK2, MPL and CALR), patients' age, VAF value and homozygous state, concomitant gene mutations are closely related to different disease type. These correlations help to improve clinical understanding of disease characteristics and risk assessment.

[Clinical analysis of gene mutation characteristics and mutation burden in myelodysplastic syndrome].

Objective: To investigate the relationship between gene mutation characteristics, mutation burden and general condition, disease subtype and karyotype of patients with myelodysplastic syndrome (MDS), and its clinical value. Methods: High-throughput sequencing was used to detect 65 blood tumor-related genes in 191 MDS patients and 9 secondary acute myelocytic leukemia patitents(SAML), and to analyze the characteristics of abnormal genes, mutation burden, as well as the relationship with disease subtypes, chromosome karyotypes and age. Results: Mutations were found in 148 patients (77.5%), including 47 abnormal genes and 186 mutation sites. And gene mutations were found in 9 SAML patients, the number of mutations was significantly higher than that in MDS patients (χ(2)=11.911, P=0.018). Among the abnormal genes, the mutation frequency of U2AF1 (37.3%) and ASXL1 (41.6%) were higher, and there were significant differences in mutation burden among different abnormal genes (F=91.946, P<0.001). There were differences in the number of gene mutations among different subtypes of MDS, and the number of EB-2 gene mutations was the highest (2.2±1.5). In SLD, MLD, EB-1 and EB-2, the proportion of carrying ≥ 3 mutations increased gradually (χ(2)=52.471, P=0.037). TP53 mutation was associated with abnormal karyotype (r(φ)=0.177, P=0.019), especially with complex karyotype (r(φ)=0.440, P<0.001), while NPM1 mutation is associated with normal karyotype (r(φ)=0.173, P=0.024). The number of mutations carried by patients under 30 years old was the least, and the number of mutations increased with the increase of age. The number of mutations was the most in patients aged 60 to 79 years old (P=0.017), and the mutation frequency of epigenetic related genes increased with the increase of age (P=0.041). Conclusions: The mutation characteristics and mutation load of MDS-related genes are closely related to clinical factors such as disease subtype, chromosome karyotype and patient age.

[Preliminary study of the antibody level in confirmed patients with COVID-19 after discharge].

Objective: To analyze the antibody levels and dynamic changes in patients infected with 2019-novel coronavirus(2019-nCoV). Methods: The average age of 72 corona virus disease 2019 (COVID-19) patients was (45.53±16.74)years(median age:47 year), including (44.88±17.09) years(median age:46 year) for 38 males and (46.32±16.52)years (median age:46 year) for 34 females in Loudi City, Hunan Province. There is no significant difference in genders between the severe and mild groups (χ²=0.916, P>0.05). There is a significant difference in the age between the severe and mild groups (F=3.315, P<0.05). The blood samples of 72 discharged patients were collected and the consistence of IgM and IgG antibodies were detected by chemiluminescence method. SPSS25.0 was used for gender, age, case type and antibody analysis of variance, χ2 test and other analysis. Results: The average time of the serum samples collection of 72 patients was (34.89±9.02)days (median time: 34 days) from onset of COVID-19, and (14.53±8.35) days (median time: 14 days) from discharge. The positive rate of IgM or IgG was 97.22% (70/72), and the positive rate of IgM and IgG was 48.61% (35/72) and 97.22% (70/72) respectively. Serum COVID-19 antibodies were detected in 72 patients from 1st to 40th days after discharge. The average concentration of IgM in 1-7 days, 8-14 days, 15-21 days, 22-28 days, above 29 days were 21.91(7.07-52.84)AU/ml, 14.16(6.19-32.88)AU/ml, 11.36(6.65-42.15)AU/ml, 8.15(3.66-30.12)AU/ml, 2.98(0.46-6.37)AU/ml. There was no significant difference in the time of IgM antibody concentration (H= 8.439, P>0.05). The average concentrations of IgG in 1-7 days, 8-14 days, 15-21 days, 22-28 days, 29 days and above were 169.90 (92.06-190.91) AU/ml, 163.89 (91.19-208.02) AU/ml, 173.31 (95.06-191.28) AU/ml, 122.84 (103.19-188.34) AU/ml, 101.98 (43.75-175.30) AU/ml, respectively, (H=2.232, P>0.05). The IgM becomes negative after the 3rd week of discharge and decreases rapidly with time. The IgG concentration higher than IgM during the same period, and keep at high level without any change, and decrease in the fourth week. Among them, 5 cases developed "re-infection" within 1-3 weeks after discharge, and the rate of "re-infection" was 6.94% (5/72 cases). Conclusions: After the COVID-19 patients are discharged from the hospital, the level of antibodies produced varies greatly among individuals, but the overall changes in antibodies have a certain pattern. It is recommended to strengthen the antibody monitoring during hospitalization and after discharge from the hospital to reduce the "re-infection" rate and potential risk of infection.

[Pulmonary rehabilitation guidelines in the principle of 4S for patients infected with 2019 novel coronavirus (2019-nCoV)].

A recent epidemic of pneumonia cases in Wuhan China was caused by a novel coronavirus with strong infectivity, the 2019 novel coronavirus (2019-nCoV). The article provides the pulmonary rehabilitation (PR) methods in the principle of 4S (simple, safe, satisfy, save) for patients with pneumonia caused by the novel coronavirus, shows how to establish a ventilative and convectional PR environment to prevent the spread of virus through droplets, how to guide the patients to carry out PR, how to carry out respiratory muscle training, effective cough, expectoration, sneeze, general exercise, digestive function rehabilitation and psychological rehabilitation, and how to clean and disinfect the PR environment.

[The effect of a breathing trainer on relieving airway pressure caused by active cough in patients with mechanical ventilation].

Objective: To explore the effect of a breathing trainer on relieving the peak airway pressure caused by forced exhalation at the end of deep inspiration, gentle coughing at the end of calm inspiration and forced coughing at the end of deep inspiration in patients undergoing mechanical ventilation. Methods: From July to September 2018, 15 patients undergoing mechanical ventilation were selected from the First Affiliated Hospital of Guangzhou Medical University, including 5 patients with invasive ventilation (3 with tracheotomy and 2 with endotracheal intubation), and 10 patients with non-invasive ventilation through mask. The patients included 14 males and 1 female, aging 48-79 years, with an average age of (68±10) years. A Breathing Trainer developed by both Dongguan Yongsheng Medical Products Co., Ltd. and Guangzhou Institute of Respiratory Health was used to relieve the peak airway pressure. A one-way expiratory valve connected with a spring at the expiratory end of the Breathing Trainer was not opened until the pressure inside the airway was higher than 20 cmH(2)O (1 cmH(2)O=0.098 kPa), and opened completely when the pressure was higher than 35 cmH(2)O. Both before and after the Breathing Trainer was connected to the respiratory circuit, the patients were asked to exhale hard at the end of deep inspiration, to cough gently at the end of calm inspiration and to cough forcefully at the end of deep inspiration and the airway pressure were measured respectively. Each action was tested 3 times, and the interval time of each test was 1 min, and the interval of each action was 10 min. Results: Among the patients with tracheotomy or endotracheal intubation for invasive mechanical ventilation, when the patients exhaled hard at the end of deep inspiration,coughed gently at the end of gentle inspiration and coughed forcefully at the end of deep inspiration, the peak airway pressure measured before the ventilation circuit was connected to the Breathing Trainer was (30.0±4.5), (31.4±5.0) and (34.9±5.0)cmH(2)O, respectively, which was significantly higher than that after the ventilation circuit was connected to the Breathing Trainer(26.3±2.9), (26.7±3.5) and (29.0±4.1) cmH(2)O (all P<0.01). Among the patients with non-invasive mechanical ventilation wearing face masks, when the patients exhaled hard at the end of deep inspiration, coughed gently at the end of gentle inspiration and coughed forcefully at the end of deep inspiration, the peak airway pressure was (17.7±1.9), (16.6±2.5) and (18.9±2.5) respectively, before the ventilation circuit was connected to the Breathing Trainer, and was (18.9±2.5), (16.3±1.9) and (18.8±2.0) cmH(2)O respectively, after the ventilation circuit was connected to the Breathing Trainer. There was no significant difference between them (P>0.05). Conclusion: The application of Breathing Trainer in the mechanical ventilation circuit of tracheotomy or endotracheal intubation could significantly reduce the peak airway pressure caused by hard exhalation and cough. It could be used as an active cough assist device for mechanical ventilation patients to prevent high airway pressure.

[The value and application prospect of cyclosporine A in the treatment of dry eye].

Dry eye is the most common ocular surface disease, the core pathogenesis of which is ocular surface inflammation. Anti-inflammation is one of the important clinical treatments of dry eye. Since the definitely immunosuppressive effect, topical ophthalmic cyclosporine A (CsA) has been used in dry eye for many years. A large number of studies have been published in recent years, including its therapeutic effects, indications and applications. This article will introduce the mechanism of ophthalmic CsA, summarize its clinical treatment effects in dry eyes of different countries, different causes, and different severity. Meanwhile we will analyze the pros and cons and the applied prospects of ophthalmic CsA with various forms, and generalize the indications, treatment suggestions and safety of CsA used in dry eye, in order to provide references for the clinical applications. (Chin J Ophthalmol, 2020, 56:787-795).

[The influence of additive clonal chromosome abnormalities in Ph negative cells on the efficacy of chronic myeloid leukemia].

Objective: To investigate the influence of additional clonal chromosome abnormalities in Ph negative cells (CCA/Ph(-)) on the efficacy of chronic myeloid leukemia (CML) after tyrosine kinase inhibitors (TKI) treatment. Methods: The clinical data of 28 CML patients with CCA/Ph(-) treated in Henan Cancer Hospital from July 2014 to December 2017 were analyzed retrospectively. The univariate analysis was carried out by Kaplan-Meier method. Multivariate analysis was done by Cox proportional risk model. Results: A total of 28 CCA/Ph(-)patients were recruited including 17 males and 11 females with median age of 42.5 years old. The most common CCA/Ph(-)were trisomy 8 (60.7%), monosomy 7 (14.3%). 64.3% CCA/Ph(-)were transient and 35.7% recurrent (more than 2 times). Cytopenia in two or three lineages of peripheral blood was seen in 42.9% patients. As to the efficacy, 89.3% patients achieved major cytogenetic response (MCyR), 25% with major molecular response (MMR). The median follow-up time was 26.5 months. Treatment failure (TF) of TKI occurred in 32.1% patients with median duration of response 8 (1-41) months. Univariate analysis showed that TF rate was significantly correlated with the frequency of CCA/Ph(-)and cytopenia (all P<0.05). The MMR rate was also significantly correlated with cytopenia (P<0.05). Cytopenia of two lineages or pancytopenia was an independent risk factor related to MMR rate (RR=3.868, 95%CI 1.216-12.298, P=0.022) . Conclusions: Cytopenia in CCA/Ph(-)appears to be an independent risk factor of MMR in CML patients with TKI treatment. The recurrent CCA/Ph(-)may link to higher treatment failure rate. Drug withdrawal or alternative strategy should be considered according to response and the ABL kinase mutations.

[Influence of different mixing pads on physical and mechanical properties of glass ionomer cement].

OBJECTIVE: To analyze the influence of different mixing pads on the physical and mechanical properties of glass ionomer cement. METHODS: Three different glass ionomer base cements were mixed with a plastic spatula on three different mixing pads including paper pad, glass pad and silicon pad whose HS were 40, 60 and 80. The GIC was packed into stainless steel molds to get specimens. Surface roughness, surface hardness and compressive strength were evaluated. RESULTS: As for compressive strength, CF: There was the highest mean compressive strength that was significantly higher than those of silicon pad 60 group, paper 60 group and paper 20 group in silicon pad 40 group, the differences P values were 0.002, 0.027, and 0.036, statistically significant difference between the above groups (P<0.05). IX: there was the highest mean compressive strength that was significantly higher than those of silicon pad 60 group in paper pad 20 group,the differences P value was 0.008, statistically significant (P<0.05). FX: there was the highest mean compressive strength that was no significantly higher than those of paper pad 20 group in silicon pad 40 group, but was significantly higher than those of the other groups. As for surface hardness, CF: there was the highest mean surface hardness that was significantly higher than those of silicon pad 60 and 80 group, paper 60 group in silicon pad 40 group, the differences P value was 0.021, 0.001, 0.032, 0.008 and 0.016, statistically significant difference between the above groups (P<0.05). IX and FX: there was no statistical significance between any two groups in surface hardness. As for surface roughness, CF: there was no statistical significance between any two groups in surface roughness. IX: there was the lowest mean surface roughness that was significantly lower than those of paper pad 40 and 60 group in glass pad group, the differences P values were 0.003 and 0.027, statistically significant difference between the above groups (P<0.05). FX: there was the lowest mean surface roughness that was significantly lower than those of paper pad 60 group in glass pad group, the differences P value was 0.018, showing a statistical difference (P<0.05). CONCLUSION: Mixing glass ionomer cement on silicon pad 40 results in higher compressive strength and lower surface roughness, worthy of clinical popularization.

[Immunogenicity analysis of sequential inoculation of different strains of poliomyelitis vaccines in Shanghai].

Objective: To evaluate the immunogenicity of different strains of inactivated poliomyelitis vaccines (IPV) by sequential program. Methods: This parallel-group controlled trial was conducted in immunization clinics in Shanghai from March 2016 to September 2017. Sabin strains inactivated poliomyelitis vaccines (sIPV), WPV strains inactivated poliomyelitis vaccines (wIPV) and live poliomyelitis Type Ⅰ Type Ⅲ vaccine (bOPV) as the investigational vaccine were used at 2, 3, 4 months old in 325 infants in Shanghai. Infants vaccinated by four sequential program were divided into 4 groups: sIPV+sIPV+bOPV, sIPV+wIPV+bOPV, wIPV+sIPV+bOPV and wIPV+wIPV+bOPV. A total of 230 investigators' blood samples were collected before primary immunization and 163 investigators' blood samples were collected after primary immunization. A total of 151 investigators (36, 44, 30 and 41 in each group) finished primary immunization and blood sampling before and after the primary immunization. The geometric mean titer (GMT) of poliovirus typesⅠ and Ⅲ neutralizing antibody was tested and calculated, and the positive results of antibody before and after primary immunization were analyzed. Results: Among the 151 investigators, the age were (2.27±0.61) months and birth weight were (3.27±0.43) kg, and 70 were male. The positive rates of typeⅠwas 98.68% (149 cases), and type Ⅲ was 97.35% (147 cases); the number of investigators tested in each group was 36, 44, 30 and 41, respectively; the positive rates of typeⅠwas 97.22% (35 cases), 100.00% (44 cases), 96.67% (29 cases) and 100.00% (41 cases) (P=0.345); the positive rates of type Ⅲ were 97.22% (35 cases), 95.45% (42 cases), 96.67% (29 cases) and 100.00% (41 cases) (P=0.614). Conclusion: Using sIPV and wIPV simultaneously or alternately for sequential immunization of poliomyelitis vaccines showed good immunogenicity for infants at appropriate age.