RESUMEN
The generation of spectrally pure microwave signals is a critical functionality in fundamental and applied sciences, including metrology and communications. Optical frequency combs enable the powerful technique of optical frequency division (OFD) to produce microwave oscillations of the highest quality1,2. Current implementations of OFD require multiple lasers, with space- and energy-consuming optical stabilization and electronic feedback components, resulting in device footprints incompatible with integration into a compact and robust photonic platform3-5. Here we demonstrate all-optical OFD on a photonic chip by synchronizing two distinct dynamical states of Kerr microresonators pumped by a single continuous-wave laser. The inherent stability of the terahertz beat frequency between the signal and idler fields of an optical parametric oscillator is transferred to a microwave frequency of a Kerr soliton comb, and synchronization is achieved via a coupling waveguide without the need for electronic locking. OFD factors of N = 34 and 468 are achieved for 227 GHz and 16 GHz soliton combs, respectively. In particular, OFD enables a 46 dB phase-noise reduction for the 16 GHz soliton comb, resulting in the lowest microwave noise observed in an integrated photonics platform. Our work represents a simple, effective approach for performing OFD and provides a pathway towards chip-scale devices that can generate microwave frequencies comparable to the purest tones produced in metrological laboratories.
RESUMEN
Visible-light photonic integrated circuits (PICs) promise scalability for technologies such as quantum information, biosensing, and scanning displays, yet extending large-scale silicon photonics to shorter wavelengths has been challenging due to the higher losses. Silicon nitride (SiN) has stood out as the leading platform for visible photonics, but the propagation losses strongly depend on the film's deposition and fabrication processes. Current loss measurement techniques cannot accurately distinguish between absorption and surface scattering, making it difficult to identify the dominant loss source and reach the platform's fundamental limit. Here we demonstrate an ultra-low loss, high-confinement SiN platform that approaches the limits of absorption and scattering across the visible spectrum. Leveraging the sensitivity of microresonators to loss, we probe and discriminate each loss contribution with unparalleled sensitivity, and derive their fundamental limits and scaling laws as a function of wavelength, film properties and waveguide parameters. Through the design of the waveguide cross-section, we show how to approach the absorption limit of the platform, and demonstrate the lowest propagation losses in high-confinement SiN to date across the visible spectrum. We envision that our techniques for loss characterization and minimization will contribute to the development of large-scale, dense PICs that redefine the loss limits of integrated platforms across the electromagnetic spectrum.
RESUMEN
We measured the covariance matrix of the fields generated in an integrated third-order optical parametric oscillator operating above threshold. We observed up to (2.3 ± 0.3) dB of squeezing in amplitude difference and inferred (4.9 ± 0.7) dB of on-chip squeezing, while an excess of noise for the sum of conjugated quadratures hinders the entanglement. The degradation of amplitude correlations and state purity for increasing the pump power is consistent with the observed growth of the phase noise of the fields, showing the necessity of strategies for phase noise control aiming at entanglement generation in these systems.
RESUMEN
Optical frequency combs are broadband sources that offer mutually coherent, equidistant spectral lines with unprecedented precision in frequency and timing for an array of applications1. Frequency combs generated in microresonators through the Kerr nonlinearity require a single-frequency pump laser and have the potential to provide highly compact, scalable and power-efficient devices2,3. Here we demonstrate a device-a laser-integrated Kerr frequency comb generator-that fulfils this potential through use of extremely low-loss silicon nitride waveguides that form both the microresonator and an integrated laser cavity. Our device generates low-noise soliton-mode-locked combs with a repetition rate of 194 gigahertz at wavelengths near 1,550 nanometres using only 98 milliwatts of electrical pump power. The dual-cavity configuration that we use combines the laser and microresonator, demonstrating the flexibility afforded by close integration of these components, and together with the ultra low power consumption should enable production of highly portable and robust frequency and timing references, sensors and signal sources. This chip-based integration of microresonators and lasers should also provide tools with which to investigate the dynamics of comb and soliton generation.
RESUMEN
Kerr soliton combs operate in the anomalous group-velocity dispersion regime through the excitation of dissipative solitons. The generated bandwidth is largely dependent on the cavity dispersion, with higher-order dispersion contributing to dispersive-wave (DW) generation that allows for power enhancement of the comb lines at the wings of the spectrum. However, the spectral position of the DW is highly sensitive to the overall cavity dispersion, and the inevitable dimension variations that occur during the fabrication process result in deviations in the DW emission wavelength. Here, we demonstrate active tuning of the DW wavelength, enabling post-fabrication spectral shaping of the soliton spectrum. We control the DW position by introducing a wavelength-controllable avoided mode crossing through actively tuning the resonances of a silicon nitride coupled microresonator via integrated heaters. We demonstrate DW tuning over 113 nm with a spectral power that can exceed the peak soliton spectral power. In addition, our modeling reveals buildup and enhancement of the DW in the auxiliary resonator, indicating that the mode hybridization arising from the strong coupling between the two resonators is critical for DW formation.
RESUMEN
We investigate the conversion efficiency (CE) of soliton modelocked Kerr frequency combs. Our analysis reveals three distinct scaling regimes of CE with the cavity free spectral range (FSR), which depends on the relative contributions of the coupling and propagation loss to the total cavity loss. Our measurements, for the case of critical coupling, verify our theoretical prediction over a range of FSRs and pump powers. Our numerical simulations also indicate that mode crossings have an adverse effect on the achievable CE. Our results indicate that microresonator combs operating with spacings in the electronically detectable regime are highly inefficient, which could have implications for integrated Kerr comb devices.
RESUMEN
We report soliton-effect pulse compression of low energy (â¼25pJ), picosecond pulses on a photonic chip. An ultra-low-loss, dispersion-engineered 40-cm-long waveguide is used to compress 1.2-ps pulses by a factor of 18, which represents, to our knowledge, the largest compression factor yet experimentally demonstrated on-chip. Our scheme allows for interfacing with an on-chip picosecond source and offers a path towards a fully integrated stabilized frequency comb source.
RESUMEN
A simple and compact straight-cavity laser oscillator incorporating a cascaded quadratic nonlinear crystal and a semiconductor saturable absorber mirror (SESAM) can deliver stable femtosecond modelocking at high pulse repetition rates >10 GHz. In this paper, we experimentally investigate the influence of intracavity dispersion, pump brightness, and cavity design on modelocking with high repetition rates, and use the resulting insights to demonstrate a 10.4-GHz straight-cavity SESAM-modelocked Yb:CALGO laser delivering 108-fs pulses with 812 mW of average output power. This result represents a record-level performance for diode-pumped femtosecond oscillators with repetition rates above 10 GHz. Using the oscillator output without any optical amplification, we demonstrate coherent octave-spanning supercontinuum generation (SCG) in a silicon nitride waveguide. Subsequent f-to-2f interferometry with a periodically poled lithium niobate waveguide enables the detection of a strong carrier-envelope offset (CEO) beat note with a 33-dB signal-to-noise ratio.
RESUMEN
Compact beam steering in the visible spectral range is required for a wide range of emerging applications, such as augmented and virtual reality displays, optical traps for quantum information processing, biological sensing, and stimulation. Optical phased arrays (OPAs) can shape and steer light to enable these applications with no moving parts on a compact chip. However, OPA demonstrations have been mainly limited to the near-infrared spectral range due to the fabrication and material challenges imposed by the shorter wavelengths. Here, we demonstrate the first chip-scale phased array operating at blue wavelengths (488 nm) using a high-confinement silicon nitride platform. We use a sparse aperiodic emitter layout to mitigate fabrication constraints at this short wavelength and achieve wide-angle beam steering over a 50° field of view with a full width at half-maximum beam size of 0.17°. Large-scale integration of this platform paves the way for fully reconfigurable chip-scale three-dimensional volumetric light projection across the entire visible range.
RESUMEN
Squeezed states are a primary resource for continuous-variable (CV) quantum information processing. To implement CV protocols in a scalable and robust way, it is desirable to generate and manipulate squeezed states using an integrated photonics platform. In this Letter, we demonstrate the generation of quadrature-phase squeezed states in the radio-frequency carrier sideband using a small-footprint silicon-nitride microresonator with a dual-pumped four-wave-mixing process. We record a squeezed noise level of 1.34 dB (±0.16 dB) below the photocurrent shot noise, which corresponds to 3.09 dB (±0.49 dB) of quadrature squeezing on chip. We also show that it is critical to account for the nonlinear behavior of the pump fields to properly predict the squeezing that can be generated in this system. This technology represents a significant step toward creating and manipulating large-scale CV cluster states that can be used for quantum information applications, including universal quantum computing.
RESUMEN
Frequency encoding of quantum information together with fiber and integrated photonic technologies can significantly reduce the complexity and resource requirements for realizing all-photonic quantum networks. The key challenge for such frequency domain processing of single photons is to realize coherent and selective interactions between quantum optical fields of different frequencies over a range of bandwidths. Here, we report frequency-domain Hong-Ou-Mandel interference with spectrally distinct photons generated from a chip-based microresonator. We use four-wave mixing to implement an active "frequency beam splitter" and achieve interference visibilities of 0.95±0.02. Our work establishes four-wave mixing as a tool for selective high-fidelity two-photon operations in the frequency domain which, combined with integrated single-photon sources, provides a building block for frequency-multiplexed photonic quantum networks.
RESUMEN
Optical coherence tomography (OCT) is a powerful interferometric imaging technique widely used in medical fields such as ophthalmology, cardiology and dermatology. Superluminescent diodes (SLDs) are widely used as light sources in OCT. Recently integrated chip-based frequency combs have been demonstrated in numerous platforms and the possibility of using these broadband chip-scale combs for OCT has been raised extensively over the past few years. However, the use of these chip-based frequency combs as light sources for OCT requires bandwidth and power compatibility with current OCT systems and have not been shown to date. Here we generate frequency combs based on chip-scale lithographically-defined microresonators and demonstrate its capability as a novel light source for OCT. The combs are designed with a small spectral line spacing of 0.21â nm which ensure imaging range comparable to commercial system and operated at non-phase locked regime which provide conversion efficiency of 30%. The comb source is shown to be compatible with a standard commercial spectral domain (SD) OCT system and enables imaging of human tissue with image quality comparable to the one achieved with tabletop commercial sources. The comb source also provides a path towards fully integrated OCT systems.
RESUMEN
We demonstrate an approach for automated Kerr comb generation in the normal group-velocity dispersion (GVD) regime. Using a coupled-ring geometry in silicon nitride, we precisely control the wavelength location and splitting strength of avoided mode crossings to generate low-noise frequency combs with pump-to-comb conversion efficiencies of up to 41%, which is the highest reported to date for normal-GVD Kerr combs. Our technique enables on-demand generation of a high-power comb source for applications such as wavelength-division multiplexing in optical communications.
RESUMEN
We demonstrate various regimes of synchronization in systems of two coupled cavity soliton-based Kerr frequency combs. We show subharmonic, harmonic, and harmonic-ratio synchronization of coupled microresonators, and reveal their dynamics in the form of Arnold tongues, structures that are ubiquitous in nonlinear dynamical systems. Our experimental results are well corroborated by numerical simulations based on coupled Lugiato-Lefever equations. This Letter illustrates the newfound degree of flexibility in synchronizing Kerr combs across a wide range of comb spacings and could find applications in time and frequency metrology, spectroscopy, microwave photonics, optical communications, and astronomy.
RESUMEN
We demonstrate that nondegenerate four-wave mixing in a Si_{3}N_{4} microring resonator can result in a nonlinear coupling rate between two optical fields exceeding their energy dissipation rate in the resonator, corresponding to strong nonlinear coupling. We demonstrate that this leads to a Rabi-like splitting, for which we provide a theoretical description in agreement with our experimental results. This yields new insight into the dynamics of nonlinear optical interactions in microresonators and access to novel phenomena.
RESUMEN
We demonstrate a chip-scale f-2f interferometer for carrier-envelope-offset frequency (fCEO) detection. This is enabled by simultaneously producing octave-spanning coherent supercontinuum generation and second-harmonic generation in a single dispersion-engineered silicon nitride waveguide. We measure the fCEO beatnote of an 80 MHz modelocked pump source with a signal-to-noise ratio of 25 dB. Our simple approach for f-2f interferometry enables a straightforward route towards a chip-scale self-referenced frequency comb source that can operate at low pulse energies.
RESUMEN
We demonstrate the generation of counter-rotating cavity solitons in a silicon nitride microresonator using a fixed, single-frequency laser. We demonstrate a dual three-soliton state with a difference in the repetition rates of the soliton trains that can be tuned by varying the ratio of pump powers in the two directions. Such a system enables a highly compact, tunable dual comb source that can be used for applications such as spectroscopy and distance ranging.
RESUMEN
We design and demonstrate a compact, narrow-linewidth integrated laser based on low-loss silicon nitride waveguides coupled to a III-V gain chip. By using a highly confined optical mode, we simultaneously achieve compact bends and ultra-low loss. We leverage the narrowband backreflection of a high-Q microring resonator to act as a cavity output mirror, a single-mode filter, and a propagation delay all in one. This configuration allows the ring to provide feedback and obtain a laser linewidth of 13 kHz with 1.7 mW output power around 1550 nm. This demonstration realizes a compact sub-millimeter silicon nitride laser cavity with a narrow linewidth.
RESUMEN
We demonstrate a novel approach to producing coherent, directional supercontinuum and cascaded dispersive waves using dispersion engineering in waveguides. By pumping in the normal group-velocity dispersion (GVD) regime, with two zero-GVD points to one side of the pump, pulse compression of the first dispersive wave generated in the anomalous GVD region results in the generation of a second dispersive wave beyond the second zero-GVD point in the normal GVD regime. As a result, we achieve an octave-spanning supercontinuum generated primarily to one side of the pump spectrum. We theoretically investigate the dynamics and show that the generated spectrum is highly coherent. We experimentally confirm this dynamical behavior and the coherence properties in silicon nitride waveguides by performing direct detection of the carrier-envelope-offset frequency of our femtosecond pump source using an f-2f interferometer. Our technique offers a path towards a stabilized, high-power, integrated supercontinuum source with low noise and high coherence, with applications including direct comb spectroscopy.
RESUMEN
We experimentally and theoretically investigate the dynamics of microresonator-based frequency comb generation assisted by mode coupling in the normal group-velocity dispersion (GVD) regime. We show that mode coupling can initiate intracavity modulation instability (MI) by directly perturbing the pump-resonance mode. We also observe the formation of a low-noise comb as the pump frequency is tuned further into resonance from the MI point. We determine the phase-matching conditions that accurately predict all the essential features of the MI and comb spectra, and extend the existing analogy between mode coupling and high-order dispersion to the normal GVD regime. We discuss the applicability of our analysis to the possibility of broadband comb generation in the normal GVD regime.