Zinc finger transcription factor MtZPT2-2 negatively regulates salt tolerance in Medicago truncatula.

Zinc finger proteins (ZFPs) are transcription factors involved in multiple cellular functions. We identified a C2H2 type ZFP (MtZPT2-2) in Medicago truncatula and demonstrated that it localizes to the nucleus and inhibits the transcription of 2 genes encoding high-affinity potassium transporters (MtHKT1;1 and MtHKT1;2). MtZPT2-2 transcripts were detected in stem, leaf, flower, seeds and roots, with the highest level in the xylem and phloem of roots and stems. MtZPT2-2 transcription in leaves was reduced after salt stress. Compared with the wild-type (WT), transgenic lines overexpressing MtZPT2-2 had decreased salt tolerance, while MtZPT2-2-knockout mutants showed increased salt tolerance. MtHKT1;1 and MtHKT1;2 transcripts and Na+ accumulation in shoots and roots, as well as in the xylem of all genotypes of plants, were increased after salt treatment, with higher levels of MtHKT1;1 and MtHKT1;2 transcripts and Na+ accumulation in MtZPT2-2-knockout mutants and lower levels in MtZPT2-2-overexpressing lines compared with the WT. K+ levels showed no significant difference among plant genotypes under salt stress. Moreover, MtZPT2-2 was demonstrated to bind with the promoter of MtHKT1;1 and MtHKT1;2 to inhibit their expression. Antioxidant enzyme activities and the gene transcript levels were accordingly upregulated in response to salt, with higher levels in MtZPT2-2-knockout mutants and lower levels in MtZPT2-2-overexpressing lines compared with WT. The results suggest that MtZPT2-2 regulates salt tolerance negatively through downregulating MtHKT1;1 and MtHKT1;2 expression directly to reduce Na+ unloading from the xylem and regulates antioxidant defense indirectly.

3D flexible compositing resonant cavity system for high-performance SERS sensing.

Arrayed resonant cavity with outstanding optical trapping ability have received increasing attention in surface-enhanced Raman spectroscopy (SERS). Here, a three-dimensional (3D) composite AgNPs-Al2O3/Au/inverted patterned sapphire substrate PMMA (IPSSPMMA) flexible resonant cavity system is theoretically and experimentally investigated as a flexible SERS sensor. With the help of an effective plasma coupling (localized surface plasmons (LSPs) and surface plasmon polaritons (SPPs)), as shown by the Finite Element Method, a resonant cavity between IPSSPMMA and a particle-film nanostructure is created. Moreover, the proposed fabrication scheme can be easily used for large-scale fabrication. To measure the performance of IPSSPMMA, Rhodamine 6 G (R6G) and Crystalline violet (CV) were used as probe molecules with limit of detection (LOD) of 6.01 × 10-12 M and 5.36 × 10-10 M, respectively, and enhancement factors (EF) of R6G up to 8.6 × 109. Besides, in-situ detection of CV on the surface of aquatic products with a LOD of 3.96 × 10-5 M, enables highly sensitive in-situ detection of surface analytes. The Raman performance and in-situ detection results demonstrate that the proposed flexible compositing resonant cavity system has the advantages of ultra-sensitivity, stability, uniformity, and reproducibility, and has great potential for applications in the food safety field.

Evolution of optical harmonic generation near bound-states in the continuum in hybrid plasmonic-photonic structures.

We investigate the nonlinear optical harmonic generation behaviors near the bound-states in the continuum (BICs) in hybrid plasmonic-photonic structures. The hybrid structures are designed to consist of a plasmonic grating covered with a nonlinear dielectric waveguide layer, which support two distinct groups of BICs, i.e. the symmetry-protected BICs and Friedrich-Wintgen BICs. The evolution of second- and third-harmonic generation (SHG and THG) near the two groups of BICs was studied. The high dependence of nonlinear response on the local field distribution and tensor components of susceptibility of nonlinear materials was determined. Especially, there exists optimized angles of incidence for efficient SHG and THG response due to the interaction of photonic and plasmonic modes. The results are important to understand the nonlinear response behaviors in hybrid plasmonic-photonic structures and to design the nonlinear photonic devices.

Composite substrate of graphene/Ag nanoparticles coupled with a multilayer film for surface-enhanced Raman scattering biosensing.

In this paper, we designed a surface-enhanced Raman scattering (SERS) substrate for graphene/Ag nanoparticles (Ag NPs) bonded multilayer film (MLF) using the hybrid nanostructures composed of graphene and plasmonic metal components with significant plasmonic electrical effects and unique optical characteristics. This paper achieved the advantages of efficient utilization of electromagnetic field and reduction of fluorescence background based on the electromagnetic enhancement activity of Ag NPs and unique physical/chemical properties of graphene with zero gap structures. Au/Al2O3 was stacked periodically to construct MLF. As indicated by the electric field intensity at the Au/Al2O3 interface of the respective layer, bulk plasmon polariton (BPP) in the MLF was excited and coupled with localized surface plasmon (LSP) in the Ag NPs, which enhanced the electromagnetic field on the top-layer of SERS substrate. To measure the performance of the SERS substrate, rhodamine 6G (R6G) and malachite green (MG) were used as the probe molecules, with the detection limits of 10-11 M and 10-8 M, respectively. The SERS substrate had high sensitivity and uniformity, which indicated that it has a broad application prospect in the field of molecular detection.

Highly-sensitive sensor based on toroidal dipole governed by bound state in the continuum in dielectric non-coaxial core-shell cylinder.

The electromagnetic fields distributed on the surface region of the nanostructure is very important to improve the performance of the sensor. Here, we proposed a highly sensitive sensor based on toroidal dipole (TD) governed by bound state in the continuum (BIC) in all-dielectric metasurface consisting of single non-coaxial core-shell cylinder nanostructure array. The excitation of TD resonance in a single nanostructure is still challenging. The designed nanostructure not only supports TD resonance in a single nanostructure but also has very high Q-factor. More importantly, its electric field distributes at the surface of outer cylinder-shell, which is very suitable for biosensing. To evaluate the sensing performance of our proposed structure, we investigated the sensitivity and the figure of merit (FOM) of nanostructure with different structural parameters. Maximum sensitivity and FOM can reach up to 342 nm/RIU and 1295 when the asymmetric parameter d =10 nm. These results are of great significance to the research of TD resonance and the development of ultrasensitive sensor.

LSPR optical fiber sensor based on 3D gold nanoparticles with monolayer graphene as a spacer.

Localized surface plasmon resonance (LSPR) optical fiber biosensing is an advanced and powerful label-free technique which gets great attention for its high sensitivity to refractive index change in surroundings. However, the pursuit of a higher sensitivity is still challenging and should be further investigated. In this paper, based on a monolayer graphene/gold nanoparticles (Grm/Au NPs) three-dimensional (3D) hybrid structure, we fabricated a D-shaped plastic optical fiber (D-POF) LSPR sensor using a facile two-step method. The coupling enhancement of the resonance of this multilayer structure was extremely excited by the surface plasmon property of the stacked Au NPs/Grm layer. We found that the number of plasmonic structure layers was of high importance to the performance of the sensor. Moreover, the optimal electromagnetic field enhancement effect was found in three-layer plasmonic structure. Besides, the n*(Grm/Au NPs)/D-POF sensor exhibited outstanding performance in sensitivity (2160 nm/RIU), linearity (linear fitting coefficient R2 = 0.996) and reproducibility. Moreover, the sensor successfully detected the concentration of glucose, achieving a sensitivity of 1317.61 nm/RIU, which suggested a promising prospect for the application in medicine and biotechnology.

SERS Sensing Using Graphene-Covered Silver Nanoparticles and Metamaterials for the Detection of Thiram in Soil.

Multilayer hyperbolic metamaterial (HMM)-based SERS substrates have received special consideration because they accommodate various propagation modes such as surface plasmonic polaritons (SPP). However, the SPP modes are difficult to generate in HMM due to their weak electric field enhancement. In this article, we designed novel SERS substrates consisting of graphene-covered AgNPs and HMM. The graphene-covered AgNPs work as an external coupling structure for hyperbolic metamaterials due to this structure exhibiting significant plasmonic effects as well as unique optical features. The localized surface plasmonic resonance (LSPR) of the graphene-covered AgNPs excited the SPP and thus formed a strong hot spot zone in the nanogap area of the graphene. The Raman experiment was performed using rhodamine 6G (R6G) and crystal violet (CV), which showed high stability and a maximum enhancement factor of 2.12 × 108. The COMSOL simulation further clarified that enhanced SERS performance was due to the presence of monolayer graphene and provided an atomically flat surface for organic molecules in a more controllable manner. Interestingly, the proposed SERS structure carries out quantitative detection of thiram in soil and can satisfy the basic environmental need for pesticide residue in the soil.

Plasmonic optical fiber gratings based on few-layer Ta2C MXenes for refractive index sensing.

Tilted fiber Bragg grating (TFBG) is a widespread approach for developing refractive index (RI) sensors. The unique optoelectronic properties exhibited by MXene are expected to enhance the performance of TFBG-SPR sensors. In this study, a Ta2C coating appropriate for sensing was obtained by optimizing the photo-deposition time, which addressed the challenge of preparing large areas of MXene. The uniform coating of the few-layer Ta2C increases the wavelength sensitivity and FOM of the sensor to 229.5 nm/RIU and 2228.15 respectively. This significant enhancement was attributed to an ordered MXene phase of the grown Ta2C. The energy band theory verified the metallic nature of the Ta2C and the amplification effect on the RI response. Finite element analysis demonstrated that the stronger absorption band of Ta2C facilitated the generation of surface plasmon polariton. Based on the above benefits, the sensor detected melamine in milk with a detection limit of 7.9 × 10-9M. The TFBG/Au/Ta2C sensor is a promising approach for biochemical analysis and trace detection.

Surface-enhanced Raman scattering by the composite structure of Ag NP-multilayer Au films separated by Al2O3.

In the present study, a nanoparticle-multilayer metal film substrate was presented with silver nanoparticles (Ag NPs) assembled on a multilayer gold (Au) film by employing alumina (Al2O3) as a spacer. The SERS performance of the proposed structures was determined. It was suggested that the SERS effect was improved with the increase in the number of layers, which was saturated at four layers. The SERS performance of the structures resulted from the mutual coupling of multiple plasmon modes [localized surface plasmons (LSPs), surface plasmon polaritons (SPPs), as well as bulk plasmon polaritons (BPPs)] generated by the Ag NP-multilayer Au film structure. Furthermore, the electric field distribution of the hybrid system was studied with COMSOL Multiphysics software, which changed in almost consistency with the experimentally achieved results. For this substrate, the limit of detection (LOD) was down to 10-13 M for the rhodamine 6G (R6G), and the proposed SERS substrate was exhibited prominently quantitatively detected capability and high reproducibility. Moreover, a highly sensitive detection was conducted on toluidine blue (TB) molecules. As revealed from the present study, the Ag NP-multilayer Au film structure can act as a dependable SERS substrate for its sensitive molecular sensing applications in the medical field.

Noble metal modified ReS2 nanocavity for surface-enhanced Raman spectroscopy (SERS) analysis.

The rhenium disulphide (ReS2) nanocavity-based surface enhanced Raman scattering (SERS) substrates ware fabricated on the gold-modified silicon pyramid (PSi) by thermal evaporation technology and hydrothermal method. In this work, the ReS2 nanocavity was firstly combined with metal nanostructures in order to improve the SERS properties of ReS2 materials, and the SERS response of the composite structure exhibits excellent performance in sensitivity, uniformity and repeatability. Numerical simulation reveals the synergistic effect of the ReS2 nanocavity and the plasmon resonance generated by the metal nanostructures. And the charge transfer between the metal, ReS2 and the analytes was also verified and plays an non-ignorable role. Besides, the plasmon-driven reaction for p-nitrothiophenol (PNTP) to p,p'-dimercaptobenzene (DMAB) conversion was successfully in-situ monitored. Most importantly, it is found for the first time that the SERS properties of ReS2 nanocavity-based substrates are strongly temperature dependent, and the SERS effect achieves the best performance at 45 °C. In addition, the low concentration detection of malachite green (MG) and crystal violet (CV) molecules in lake water shows its development potential in practical application.

Broadband indium tin oxide nanowire arrays as saturable absorbers for solid-state lasers.

Indium Tin Oxide nanowire arrays (ITO-NWAs), as epsilon-near-zero (ENZ) materials, exhibit a fast response time and a low saturable absorption intensity, which make them promising photoelectric materials. In this study, ITO-NWAs were successfully fabricated using a chemical vapor deposition (CVD) method, and the saturable absorption properties of this material were characterized in the near-infrared region. Further, passively Q-switched all-solid-state lasers were realized at wavelengths of 1.0, 1.3, and 2.0 µm using the as-prepared saturable absorber (SA). To the best of our knowledge, we present the first application of ITO-NWAs in all-solid-state lasers. The results reveal that ITO-NWAs may be applied as an SA while developing Q-switched lasers and that they exhibit a broad application prospect as broadband saturable absorption materials.

Aluminum nanoparticle films with an enhanced hot-spot intensity for high-efficiency SERS.

The weak plasmonic coupling intensity in an aluminum (Al) nanostructure has limited potential applications in excellent low-cost surface-enhanced Raman scattering (SERS) substrates and light harvesting. In this report, we aim to elevate the plasmonic coupling intensity by fabricating an Al nanoparticle (NP)-film system. In the system, the Al NP are fabricated directly on different Al film layers, and the nanoscale-thick alumina interlayer obtained between neighboring Al films acts as natural dielectric gaps. Interestingly, as the number of Al film layers increase, the plasmonic couplings generated between the Al NP and Al film increase as well. It is demonstrated that the confined gap plasmon modes stimulated in the nanoscale-thick alumina region between the adjacent Al films contribute significantly to elevating the plasmonic coupling intensity. The finite-difference time-domain (FDTD) method is used to carry out the simulations and verifies this result.

LSPR optical fiber biosensor based on a 3D composite structure of gold nanoparticles and multilayer graphene films.

In this paper, a localized surface-plasmon resonance (LSPR) biosensor, which uses a U-shaped multi-mode fiber (U-MMF), is introduced and investigated. It is modified with a complex of three-dimensional (3D) gold nanoparticles and multilayer graphene as spacer: n*(Au/G)@U-MMF, where n denotes the layer number of gold nanoparticles. The gold nanoparticles were synthesized by reducing chloroauric acid. Graphene films were formed using a liquid/chemical method. The number of gold-nanoparticle layers was found to be critical for the performance of the sensor. Moreover, using the finite-difference time domain, 3D nanostructures, with a wide range of gold-nanoparticle layers, were explored. The sensor showed the sensitivity of 1251.44 nm/RIU, as well as high stability and repeatability; for the measurement-process of time- and concentration-dependent DNA hybridization kinetics with detection concentrations, ranging from 0.1nM to 100 nM, the sensor displayed excellent performance, which points towards a vast potential in the field of medical diagnostics.

An Au Nanofilm-Graphene/D-Type Fiber Surface Plasmon Resonance Sensor for Highly Sensitive Specificity Bioanalysis.

A highly sensitive Au-graphene structure D-type fiber surface plasmon resonance biosensor is presented in this study to specifically detect biomolecules. The method of growing graphene is employed directly on the copper, and then a gold film of optimum thickness is sputtered, and the copper foil is etched to obtain the structure. This method makes the contact closer between the gold layer and the graphene layer to improve surface plasmon resonance performance. The performance of this type of surface plasmon resonance (SPR) sensor has been previously verified both theoretically and experimentally. With the proposed Au-graphene structure D-type fiber biosensor, the SPR behaviors are obtained and discussed. In the detection of ethanol solution, a red shift of 40 nm is found between the refractive index of 1.3330 and 1.3657. By calculation, the sensitivity of the sensor we designed is 1223 nm/RIU. Besides, the proposed sensor can detect the nucleotide bonding between the double-stranded DNA helix structures. Thus, our sensors can distinguish between mismatched DNA sequences.

Output energy enhancement in a mode-locked Er-doped fiber laser using CVD-Bi2Se3 as a saturable absorber.

In this study, the output energy in topological insulators (TIs)-based Erbium-doped fiber laser (EDFL) was improved using two strategies: bidirectional pumped laser cavity and saturable absorber (SA) with high damage threshold and large modulation depth. Using the chemical vapor deposition (CVD) method, Bismuth Selenide (Bi2Se3) film was synthesized and improved to a SA. Employing this CVD-Bi2Se3 SA in an EDFL, bright and bright-dark soliton operations were achieved. The average output power/pulse energy was 82.6 mW/48.3 nJ and 81.2 mW/47.5 nJ, respectively. The results demonstrate that CVD-Bi2Se3 can act as an excellent performance material to improve output power performance in TISA-based EDFL.

Toward the highly sensitive SERS detection of bio-molecules: the formation of a 3D self-assembled structure with a uniform GO mesh between Ag nanoparticles and Au nanoparticles.

We report a structure to form a hybrid system in which a mesh is sandwiched between Au nanoparticles (AuNPs) and Ag nanoparticles (AgNPs). This self-assembly method uses smaller and denser AgNPs "hot spots" that are spin-coated on a AuNPs@GO mesh nanostructure formed by the reaction of GO@MoS2 and HAuCl4 to form AuNPs@GO mesh@AgNPs SERS substrates. Sub-40-nm mesh and 10-nm gaps ensure the landing sites and spacing of the AgNPs. Consequently, the design integrates the strong plasmonic effects of AgNPs and AuNPs with the biological compatibility of the GO mesh. Crystal violet (CV) as low as 10-15 M can be detected, which confirms the ultrahigh sensitivity of AuNPs@GO mesh@AgNPs. Furthermore, the reproducibility, stability, and finite-difference time-domain (FDTD) simulations confirm the value of this SERS substrate. This material can be used for label-free DNA detection, and the AuNPs@GO mesh@AgNPs substrate facilitated single-molecule DNA detection limits.

Graphene-Ag nanoparticles-cicada wings hybrid system for obvious SERS performance and DNA molecular detection.

In recent years, biomaterials have increasingly attracted attention on surface-enhanced Raman spectroscopy (SERS) due to their well Raman performance while metal particles are combined with biological substrates. Therefore, we propose an environmentally friendly substrate based on silver-plated cicada wings with seamless graphene layer (Gr-AgNPs-C.w.), which can be prepared with a simple and inexpensive method. Compared with AgNPs-C.w., Gr-AgNPs-C.w. hybrids show better SERS performance with high sensitivity, good uniformity and good stability with R6G detection. The minimum detected concentration can reach 10-15 M, and the value of R2 can reach 0.996, respectively. Theoretical simulation demonstrates the situation of electromagnetic field through COMSOL software. In addition, due to the affinity of graphene for biomolecules, we can successfully detect the DNA biomolecules through a simple process. Therefore, this cheap and efficient natural SERS substrate has great potential for a considerable number of biochemical SERS applications and can broaden the way in which multiple SERS platforms derived from other natural materials are prepared.

Experimental and theoretical investigation for surface plasmon resonance biosensor based on graphene/Au film/D-POF.

A D-shape plastic optical fiber (D-POF) surface plasmon resonance (SPR) biosensor based on the graphene/Au film (G/Au) was proposed and experimentally demonstrated for detection of DNA hybridization process. To improve the detection performance of SPR sensors, the Physical Vapor Deposition (PVD) method was used to evaporate the Au film directly onto the graphene grown on copper foil, and the Au film acted as a role of traditional Polymethyl Methacrylate (PMMA). The process made graphene and Au film form seamless contact. Next, the G/Au was transferred onto the D-shape fiber together. We explored the G/Au SPR sensor by using the finite element method (FEM) and obtained the optimum materials thickness to form configuration. Compared to other plastic optical fiber experiments, the proposed sensor's sensitivity was improved effectively and calculated as 1227 nm/RIU in a range of glucose solution. Meanwhile, our proposed sensor successfully distinguishes hybridization and single nucleotide polymorphisms (SNP) by observing the resonance wavelength change. It also exhibits a satisfactory linear response (R2 = 0.996) to the target DNA liquids with respective concentrations of 0.1nM to1µM, which shows this method's wide potential in medical diagnostics.

Large-energy mode-locked ytterbium-doped linear-cavity fiber laser based on chemical vapor deposition-Bi2Se3 as a saturable absorber.

We reported on the generation of pulse bunch and large-energy dark pulses in a mode-locked ytterbium-doped linear-cavity fiber laser based on Bi2Se3 as a saturable absorber (SA). Bi2Se3 nanosheets were successfully synthesized by the chemical vapor deposition (CVD) method and transferred to the end facet of a fiber connector for the proposed SA. Its saturation intensity and modulation depth were measured to be 52 MW/cm2 and 14.5%, respectively. By inserting the Bi2Se3-based SA into the Yb-doped all-fiber linear cavity, stable pulse bunches were observed. In addition, dark soliton operation with a maximum average output power of 32.6 mW and a pulse energy of 61.8 nJ were also achieved. To the best of our knowledge, this is the first demonstration of a dark soliton within a linear cavity with much larger pulse energy than previous works. Our study fully indicated that CVD-Bi2Se3 could be an excellent SA for achieving large-energy pulse operations.

Noise-like mode-locked Yb-doped fiber laser in a linear cavity based on SnS2 nanosheets as a saturable absorber.

In this study, a high-energy noise-like mode-locked Yb-doped fiber laser in a linear cavity was achieved with SnS2-polyvinyl alcohol film as the saturable absorber. In addition, the nonlinear saturable absorption characteristics of the SnS2 were investigated experimentally. The saturation intensity and modulation depth were about 6.01 MW/cm2 and 8.68%, respectively. Under pump power of 422 mW, stable noise-like mode-locked operation with a maximum output power and largest single pulse energy of 9.50 mW and 18.1 nJ, respectively, was obtained. To the best of our knowledge, this study is the first to observe and experimentally investigate noise-like operation in a linear laser cavity. Our study may provide some valuable design guidelines for noise-like operation and create new directions for advanced photonic devices based on SnS2.