RESUMEN
The ultrasonic testing method has been widely used for measuring the axial load of bolts. However, systematic calibrations are prerequisite if specific bolts have different clamping length configurations, which leads to low efficiency and measurement errors. The focus of this work was to measure the axial load of bolts with different clamping lengths by proposing a method of clamping length correction based on piezoelectric films in order to avoid the complicated calibration steps. Firstly, the relationship between longitudinal wave time-of-flight (TOF) and axial load under different clamping lengths was studied to correct the difference between the effective stress length and the actual clamping length. Secondly, the high-frequency ZnO piezoelectric film sensor was fabricated on the bolts to improve the accuracy of longitudinal wave TOF measurement. The results showed that the center frequency of the fabricated ultrasonic sensor reached 25 MHz, which could realize the high precision measurement of TOF. The proposed correction model proved to be effective for decreasing the measurement error below 2.7% in this experiment. In conclusion, the proposed method simplified the calibration procedure for different application configurations of the same bolt and realized the efficient measurement of bolt axial load.
RESUMEN
Transforming CO2 into value-added chemicals has been an important subject in recent years. The development of a novel heterogeneous catalyst for highly effective CO2 conversion still remains a great challenge. As an emerging class of porous organic polymers, covalent organic frameworks (COFs) have exhibited superior potential as catalysts for various chemical reactions, due to their unique structure and properties. In this study, a layered two-dimensional (2D) COF, IM4F-Py-COF, was prepared through a three-component condensation reaction. Benzimidazole moiety, as an ionic liquid precursor, was integrated onto the skeleton of the COF using a benzimidazole-containing building unit. Ionization of the benzimidazole framework was then achieved through quaternization with 1-bromobutane to produce an ionic liquid-immobilized COF, i.e., BMIM4F-Py-COF. The resulting ionic COF shows excellent catalytic activity in promoting the chemical fixation of CO2 via reaction with epoxides under solvent-free and co-catalyst-free conditions. High porosity, the one-dimensional (1D) open-channel structure of the COF and the high catalytic activity of ionic liquid may contribute to the excellent catalytic performance. Moreover, the COF catalyst could be reused at least five times without significant loss of its catalytic activity.
RESUMEN
OBJECTIVE: To investigate the effects of polygala on leaning and memory and the expression of Microtubule associated protein on manganese poisoned mice. METHODS: 60 female Kunming mice were randomly and equally divided into 5 group. They are normal control group (CG), manganese poisoned group (MG), manganese poisoned with polygala high dose group (MHG), manganese poisoned with polygala middle dose group (MMG), manganese poisoned with polygala low dose group (MLG). The model of manganese poisoned mice was prepared of the way of intraperitoneal injection of manganese chloride (MnCl2 15 mg/kg), the spatial learning and memory ability was tested by Morris water maze, the Doublecortin (DCX) was tested by the way of immunofluorescent staining in the SVZ and SGZ. RESULT: In the navigation test, compared with MG, the escape latency of MHG, MMG and MLG were significantly decreased (P < 0.05), in space exploration experiments, MHG, MMG, MLG compared with MG, the number increased significantly across platforms (P < 0.05). compared with MG, the DCX expression of MHG, MMG and MLG were significantly increased (P < 0.05). CONCLUTION: The leaning and memory ability of manganese poisoned mice can be improved by the polygala, and the mechanism may be related to promote the expression of DCX and neurogenesis in the brain.
Asunto(s)
Intoxicación por Manganeso/tratamiento farmacológico , Proteínas Asociadas a Microtúbulos/efectos de los fármacos , Neurogénesis/efectos de los fármacos , Neuropéptidos/efectos de los fármacos , Extractos Vegetales/farmacología , Polygala/química , Animales , Proteínas de Dominio Doblecortina , Proteína Doblecortina , Femenino , Aprendizaje por Laberinto/efectos de los fármacos , Memoria/efectos de los fármacos , RatonesRESUMEN
Inflammatory pain is a common type of pathological pain. Although the dorsal root ganglion (DRG) is key to pathogenesis of inflammatory pain, the underlying specific molecular and cellular mechanisms remain unclear. In this study, we used mouse models of acute or chronic inflammatory pain, induced by formalin or complete Freund' s adjuvant (CFA), respectively, to explore whether tyrosine kinase receptor ErbB4 participates in the pathogenesis of inflammatory pain. Firstly, we found that both the expression of Neuregulin 1 (Nrg1) and phosphorylation of ErbB4 receptor were upregulated in DRG after inflammatory pain, implying the activation of ErbB4 in DRG. Using ErbB4-mutant mice, we found reduced pain sensitivity of mice when ErbB4 gene expression was largely ablated; furthermore, ErbB4 deletion decreased the inflammatory pain hypersensitivity of either formalin- or CFA-induced mouse models. Moreover, the pain sensitivity was reduced in mice with specific deletion of ErbB4 on advillin-positive neurons within DRG. Importantly, pain hypersensitivity also decreased in Advillin-Cre;ErbB4-/- cKO mice after formalin- or CFA-induced inflammatory pain. Finally, gene quantification differential expression analysis, using RNAseq technology in combination with GO and KEGG enrichment analysis, suggested that calcium signaling pathway possibly mediated the roles of ErbB4 on DRG sensory neurons in inflammatory pain models. Together, these results indicate that ErbB4 on advillin-positive sensory neurons enhances inflammatory pain sensitivity, providing new clues towards the pathogenic mechanisms of inflammatory pain.
RESUMEN
Post-synthetic modification has been the most powerful strategy for covalent organic frameworks (COFs) for their functionalization in many fields. This strategy is typically achieved through the quantitative reaction between existing reactive sites on the linkers (building units) and incoming functional groups. However, usage of linkages (bonds formed to construct COFs) for the post-synthetic modification still remains limited. Herein, we develop a new post-synthetic modification route that is based on the modification of linkages. With this strategy, the imine linkages of a two-dimensional (2D) COF, TFPPy-PyTTA-COF, have been transformed into amine linkages to give the amine-linked isostructure with retention of crystallinity and porosity. The subsequent aminolysis of the amine linkages with 1,3-propane sultone and further metathetical reaction with cobalt acetate [Co(OAc)2] enable the introduction of cobalt alkyl sulfonate to the one-dimensional (1D) channel walls of the COF. The resulting ionic COF with coupled Co2+ in the frameworks shows excellent catalytic activity and good recyclability towards the cycloaddition reactions of epoxides and CO2. This strategy is of interest as it opens a way to use linkage modification for exploring the potential of COFs for different applications.