RESUMEN
A novel adsorbent, aminated and protonated mesoporous alumina, was prepared and employed for the removal of copper from aqueous solution at concentrations between 5 and 30 mg/l, in batch equilibrium experiments, in order to determine its adsorption properties. The removal of copper by the adsorbents increases with increasing adsorbent dosages. The adsorption mechanism is assumed to be an ion exchange between copper and the hydrogen ions present on the surface of the mesoporous alumina. The adsorbent was characterized by XRD, TEM, SEM, and BET methods. The sorption data have been analyzed and fitted to linearized adsorption isotherm of the Freundlich, Langmuir, and Redlich-Peterson models. The batch sorption kinetics have been tested for first-order, pseudo-first-order, and pseudo-second-order kinetic reaction models. The rate constants of adsorption for all these kinetic models have been calculated. Results also showed that the intraparticle diffusion of Cu(II) on the mesoporous catalyst was the main rate-limiting step.
RESUMEN
The removal of chromium from aqueous solution by an ion exchange resin is described. Ion exchange resins 1200H, 1500H and IRN97H show a remarkable increase in sorption capacity for chromium, compared to other adsorbents. The adsorption process, which is pH dependent show maximum removal of chromium in the pH range 2-6 for an initial chromium concentration of 10mg/l. The metal ion adsorption obeyed linear, Langmuir and Freundlich isotherms. The adsorption of chromium on these cation exchange resins follows first-order reversible kinetics and pseudo-first-order kinetics. The intraparticle diffusion of chromium on ion exchange resins represents the rate-limiting step. The uptake of chromium by the ion exchange resins was reversible and thus have good potential for the removal/recovery of chromium from aqueous solutions. We conclude that such ion exchange resins can be used for the efficient removal of chromium from water and wastewater.