Trueness and surface characteristics of 3-dimensional printed casts made with different technologies.

STATEMENT OF PROBLEM: Three-dimensional (3D) printers should be capable of fabricating products with high accuracy for potential use in a wide range of dental applications. The trueness and surface characteristics of 3D-printed casts made with different technologies remain unclear. PURPOSE: The purpose of this in vitro study was to evaluate the trueness and surface characteristics of 4 types of dental casts printed using 6 different 3D printers. MATERIAL AND METHODS: Four dental casts prepared for intracoronal and extracoronal restorations were printed using 6 different 3D printers-2 printers of each printing technology (FDM: Creator, Lugo; DLP: D2, ND5100; SLA: Form 2, Form 3). The printed casts were scanned to obtain standard tessellation language (STL) data sets that were superimposed onto the reference to evaluate their trueness (n=15). Trueness was measured based on overall deviations for each cast and for sectional deviations within the cavities. For qualitative evaluation, the surface characteristics of the 3D-printed casts were analyzed by using a digital camera, stereomicroscope, and scanning electron microscope. Statistical analyses were conducted using the Kruskal-Wallis test, followed by multiple Mann-Whitney U tests for pairwise comparisons among groups (α=.05). RESULTS: The overall median trueness values were lowest with the Form 3 (27.9 µm), followed by the ND5100 (30.0 µm), Lugo (37.1 µm), D2 (41.4 µm), Form 2 (46.9 µm), and Creator (83.3 µm) (P<.05). Sectional deviations within the cavity were generally greater than overall deviation. Macroscopic and microscopic images showed that the reproduced casts had the smoothest surface with the SLA, followed by the DLP and FDM printers. Horizontal layers were more discernible with the FDM printer. CONCLUSIONS: The trueness of the 3D-printed casts was influenced by the type of tooth preparation and was printer dependent. Among the tested 3D printers, the Form 3 produced the most accurate casts, while the Creator produced the least accurate casts.

Adhesion of periodontal pathogens to self-ligating orthodontic brackets: An in-vivo prospective study.

INTRODUCTION: Our aims were to analyze adhesion of periodontopathogens to self-ligating brackets (Clarity-SL [CSL], Clippy-C [CC] and Damon Q [DQ]) and to identify the relationships between bacterial adhesion and oral hygiene indexes. METHODS: Central incisor brackets from the maxilla and mandible were collected from 60 patients at debonding after the plaque and gingival indexes were measured. Adhesions of Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Prevotella intermedia (Pi), Fusobacterium nucleatum (Fn), and Tannerella forsythia (Tf) were quantitatively determined using real-time polymerase chain reactions. Factorial analysis of variance was used to analyze bacterial adhesion in relation to bracket type and jaw position. Correlation coefficients were calculated to determine the relationships between bacterial adhesion and the oral hygiene indexes. RESULTS: Total bacteria showed greater adhesion to CSL than to DQ brackets, whereas Aa, Pg, and Pi adhered more to DQ than to CSL brackets. CC brackets showed an intermediate adhesion pattern between CSL and DQ brackets, but it did not differ significantly from either bracket type. Adhesion of Fn and Tf did not differ significantly among the 3 brackets. Most bacteria were detected in greater quantities in the mandibular than in the maxillary brackets. The plaque and gingival indexes were not strongly correlated with bacterial adhesion to the brackets. CONCLUSIONS: Because Aa, Pg, and Pi adhered more to the DQ brackets in the mandibular area, orthodontic patients with periodontal problems should be carefully monitored in the mandibular incisors where the distance between the bracket and the gingiva is small, especially when DQ brackets are used.

Influence of temporomandibular joint disc displacement on craniocervical posture and hyoid bone position.

INTRODUCTION: The purpose of this study was to evaluate craniocervical posture and hyoid bone position in orthodontic patients with temporomandibular joint (TMJ) disc displacement. METHODS: The subjects consisted of 170 female orthodontic patients who consented to bilateral magnetic resonance imaging of their TMJs. They were divided into 3 groups based on the results of magnetic resonance imaging of their TMJs: bilateral normal disc position, bilateral disc displacement with reduction, and bilateral disc displacement without reduction. Twenty-five variables from lateral cephalograms were analyzed with 1-way analysis of variance to investigate differences in craniocervical posture and hyoid bone position with respect to TMJ disc displacement status. Pearson correlation coefficients were calculated to analyze the relationships between craniofacial morphology and craniocervical posture or hyoid bone position. RESULTS: Subjects with TMJ disc displacement were more likely to have an extended craniocervical posture with Class II hyperdivergent patterns. The most significant differences were found between patients with bilateral normal disc position and bilateral disc displacement without reduction. However, hyoid bone position in relation to craniofacial references was not significantly different among the TMJ disc displacement groups, except for variables related to the mandible. Pearson correlation coefficients indicated that extended craniocervical posture was significantly correlated with backward positioning and clockwise rotation of the mandible. CONCLUSIONS: This suggests that craniocervical posture is significantly influenced by TMJ disc displacement, which may be associated with hyperdivergent skeletal patterns with a retrognathic mandible.

Adhesion of mutans streptococci to self-ligating ceramic brackets: in vivo quantitative analysis with real-time polymerase chain reaction.

OBJECTIVE: To analyze in vivo mutans streptococci (MS) adhesion to self-ligating ceramic brackets [Clarity-SL (CSL) and Clippy-C (CC)] and the relationships between bacterial adhesion and oral hygiene indices. MATERIALS AND METHODS: Four central incisor brackets from the maxilla and mandible were collected from 40 patients (20 patients per each bracket type) at debonding immediately after plaque and gingival indices were measured. Adhesions of Streptococcus mutans, S. sobrinus, and total bacteria were quantitatively determined using real-time polymerase chain reaction after genomic DNA was extracted. Factorial analysis of variance was used to analyze bacterial adhesion to the brackets with respect to the bracket type and jaw position. Correlation coefficients were calculated to determine the relationships of bacterial adhesion to oral hygiene indices. RESULTS: Adhesion of total bacteria and S. mutans to CSL was higher than that to CC (P < 0.001). Adhesion of total bacteria to the mandibular brackets was higher than that to the maxillary ones (P < 0.001), while adhesion of S. mutans to the maxillary brackets were higher than that in the mandibular ones (P < 0.001). In particular, the proportion of S. mutans to total bacteria in CSL was higher than CC (P < 0.05) in the maxillary anterior teeth (P < 0.001). There were no significant differences in adhesion of S. sobrinus between the brackets and jaw positions. Interestingly, no significant relationships were found between bacterial adhesions and oral hygiene indices. LIMITATIONS: Complex bracket configurations may significantly influence bacterial adhesion to orthodontic brackets. Further in vivo study using bracket raw materials will help to define the relationships between bacteria adhesion and enamel demineralization. CONCLUSIONS: Because oral hygiene indices were not significantly correlated with adhesions of MS to self-ligating ceramic brackets, careful examinations around the brackets should be needed to prevent enamel demineralization, regardless of oral hygiene status.

The effects of TMJ symptoms on skeletal morphology in orthodontic patients with TMJ disc displacement.

OBJECTIVE: The aim of this study was to investigate the effects of temporomandibular joint (TMJ) symptoms on skeletal morphologies of orthodontic patients with TMJ disc displacement (DD). MATERIALS AND METHODS: The sample consisted of 197 women seeking orthodontic treatment. The subjects were divided into two groups according to the presence of TMJ symptoms: the presence and absence of TMJ symptoms. Each group was sub-divided into three groups based on magnetic resonance images of bilateral TMJs: bilateral normal disc position (BN), bilateral disc displacement with reduction (DDR) and bilateral disc displacement without reduction (DDNR). Seventeen variables from lateral cephalograms were analyzed by two-way analysis of variance to identify differences in skeletal morphologies with respect to TMJ symptoms and TMJ DD status. RESULTS: Patients with TMJ DD were more likely to have short ramus height, short mandibular body length and backward positioning of the ramus and mandible. These skeletal morphologies became more severe as TMJ DD progressed to DDNR. However, the skeletal morphologies associated with TMJ DD were not significantly different between symptomatic and asymptomatic patients. As a result, patients with TMJ DD had backward positioning and clockwise rotation compared to those with bilateral normal TMJs, irrespective of the presence of TMJ symptom. CONCLUSIONS: This study suggests that TMJ DD is associated with altered skeletal morphology, but TMJ symptoms do not significantly influence the relationships between TMJ DD and skeletal morphology.

Quantitative analysis of changes in salivary mutans streptococci after orthodontic treatment.

INTRODUCTION: The purpose of this study was to analyze the initial changes in salivary mutans streptococci levels after orthodontic treatment with fixed appliances. METHODS: Our subjects consisted of 58 adults. Whole saliva and simplified oral hygiene index values were obtained at 4 time points: at debonding (T1), 1 week after debonding (T2), 5 weeks after debonding (T3), and 13 weeks after debonding (T4). Repeated measures analysis of variance was used to determine the time-related differences in salivary bacterial levels and the simplified oral hygiene index values among the 4 time points after quantifying the salivary levels of Streptococcus mutans, Streptococcus sobrinus, and total bacteria with real-time polymerase chain reaction. RESULTS: Simplified oral hygiene index values and total bacteria significantly decreased, but salivary mutans streptococci levels significantly increased after orthodontic treatment. The amounts of total bacteria in saliva significantly decreased at T3 (T1, T2 > T3, T4), and the simplified oral hygiene index values decreased at T2 (T1 > T2, T3, T4). However, salivary S mutans and S sobrinus significantly increased at T3 and T4, respectively (T1, T2 < T3 < T4). Furthermore, the proportion of mutans streptococci to total bacteria significantly increased at T4 (T1, T2, T3 < T4). CONCLUSIONS: This study suggests that careful hygienic procedures are needed to reduce the risk for dental caries after orthodontic treatment, despite overall improved oral hygiene status.

Gender differences in dentofacial characteristics of adult patients with temporomandibular disc displacement.

PURPOSE: The purpose of this study was to assess gender differences in dentofacial characteristics of adult patients according to temporomandibular joint (TMJ) disc displacement (DD) status. MATERIALS AND METHODS: The sample consisted of 293 adult patients (80 male and 213 female). Male and female patients were divided into 3 groups based on magnetic resonance images of bilateral TMJs: bilateral normal disc position (BN), bilateral DD with reduction (DDR), and bilateral DD without reduction (DDNR). Seventeen variables from lateral cephalograms were analyzed by 2-way analysis of variance to identify differences in dentofacial morphologies with respect to gender and TMJ DD status. RESULTS: Patients with TMJ DD had short ramus height, short mandibular body length, and backward positioning of the ramus and mandible. These dentofacial characteristics became more severe as TMJ DD progressed to DDNR. In addition, dentofacial characteristics associated with TMJ DD were not significantly different between men and women except for effective mandibular length (Articulare to pogonion). Effective mandibular length even tended to decrease as TMJ DD progressed, but male patients showed a larger difference in effective mandibular length between BN and DDR than female patients. CONCLUSIONS: This study's findings suggest that dentofacial morphology is strongly associated with TMJ DD status and that skeletal Class II hyperdivergent pattern with a short ramus and mandible may be a potential indicator of TMJ DD regardless of gender.

Changes in salivary periodontal pathogens after orthodontic treatment: An in vivo prospective study.

OBJECTIVE: To analyze the initial changes in salivary levels of periodontal pathogens after orthodontic treatment with fixed appliances. MATERIALS AND METHODS: The subjects consisted of 54 adult patients. The Simplified Oral Hygiene Index, Plaque Index, and Gingival Index were measured as periodontal parameters. Both the plaque and gingival indexes were obtained from the central and lateral incisors and first molars of both arches. Whole saliva and periodontal parameters were obtained at the following four time points: immediately before debonding (T1), 1 week after debonding (T2), 5 weeks after debonding (T3), and 13 weeks after debonding (T4). Repeated measures analysis of variance was used to determine salivary bacterial levels and periodontal parameters among the four time points after quantifying salivary levels of Aggregatibacter actinomycetemcomitans (Aa), Fusobacterium nucleatum (Fn), Porphyromonas gingivalis (Pg), Prevotella intermedia (Pi), Tannerella forsythia (Tf), and total bacteria using the real-time polymerase chain reaction. RESULTS: All periodontal parameters were significantly decreased immediately after debonding (T2). The salivary levels of total bacteria and Pg were decreased at T3, while Pi and Tf levels were decreased at T4. However, the amount of Aa and Fn remained at similar levels in saliva during the experimental period. Interestingly, Aa and Fn were present in saliva at higher levels than were Pg, Pi, and Tf. CONCLUSION: The higher salivary levels of Aa and Fn after debonding suggests that the risk of periodontal problems cannot be completely eliminated by the removal of fixed orthodontic appliances during the initial retention period, despite improved oral hygiene.

Changes in salivary periodontal pathogens after orthodontic treatment: An in vivo prospective study.

OBJECTIVE: To analyze the initial changes in salivary levels of periodontal pathogens after orthodontic treatment with fixed appliances. MATERIALS AND METHODS: The subjects consisted of 54 adult patients. The Simplified Oral Hygiene Index, Plaque Index, and Gingival Index were measured as periodontal parameters. Both the plaque and gingival indexes were obtained from the central and lateral incisors and first molars of both arches. Whole saliva and periodontal parameters were obtained at the following four time points: immediately before debonding (T1), 1 week after debonding (T2), 5 weeks after debonding (T3), and 13 weeks after debonding (T4). Repeated measures analysis of variance was used to determine salivary bacterial levels and periodontal parameters among the four time points after quantifying salivary levels of Aggregatibacter actinomycetemcomitans (Aa), Fusobacterium nucleatum (Fn), Porphyromonas gingivalis (Pg), Prevotella intermedia (Pi), Tannerella forsythia (Tf), and total bacteria using the real-time polymerase chain reaction. RESULTS: All periodontal parameters were significantly decreased immediately after debonding (T2). The salivary levels of total bacteria and Pg were decreased at T3, while Pi and Tf levels were decreased at T4. However, the amount of Aa and Fn remained at similar levels in saliva during the experimental period. Interestingly, Aa and Fn were present in saliva at higher levels than were Pg, Pi, and Tf. CONCLUSION: The higher salivary levels of Aa and Fn after debonding suggests that the risk of periodontal problems cannot be completely eliminated by the removal of fixed orthodontic appliances during the initial retention period, despite improved oral hygiene.